ITunes has stopped working instantly when trying to open

Worked PERFECTLY upon until this morning. I try opening it and immediately get "iTunes has stopped working". Restart didn't fix this. Haven't tried uninstalling and reinstalling yet; frankly I don't want to.
iTunes 64 bit latest version
Latest Quicktime
Windows 7 Ultimate x64 SP1

It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
[iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

Similar Messages

  • Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

    I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
    Solved!
    Go to Solution.

    Hi - are you getting it at the start of installation, during or after 100% progress has finished?
    Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
    This could be caused by the NVIDIA chipset driver :
    https://decibel.ni.com/content/message/46299?tstar​t=-130
    Thanks
    Sacha
    // it takes almost no time to rate an answer

  • HT203175 After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

    After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

    One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
    If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

  • I get a message that itunes  has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for  that file

    I get a message that itunes  has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for  that file

    I found the file but when I added it to the  list for the Data  Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

  • ITunes has stopped working message after having it open for one minute.

    It's fully updated to iOS 5 and was working fine until now. Running on Windows 7 and worked flawlessly till this point. Any tips? I already uninstalled and reinstalled. Only security software I run is Microdoft Security Essesntials and that has never been an issue. At a loss here.

    iTunes has stopped working message after having it open for one minute.
    I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142.  After reading tons of probelms online about version 10.5
    I have decided to do nothing for now.  Seems people are putting hours into trying to fix it.  I was going to uninstall and reinstall but seems that isn;t working for to many people.
    How do we get some help from apple? 
    Anyone have any answers???  APPLE HELP please!!!!!!!!!!!!!!!

  • I keep getting the message itunes has stopped working I can't even open itunes I have tried uninstalling and installing, starting in safe mode but nothing seems to work. Please can anyone help me

    I have recently bought a new laptop with windows 7 and when i have tried to install and open itunes i keep getting the message 'itunes has stopped working' itunes then shuts down before i can do anything to fix it. This happens every time I try to open itunes. I have tried uninstalling itunes and reinstalling it, starting itunes in safe mode. Nothing seems to work. Please can anyone help.

    If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
    Try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • "itunes has stopped working" message when syching iphone

    Need help..
    Ever since I installed the update for the apple software on my PC, when I try to sync my iphone 4 on the last step of synching I get a window popping up saying that "itunes has stopped working". Then I get prompted to close the programme.
    I run Windows 7, and cannot understand why it does this.
    If anyone can help, I would greatly appreciate it.

    Not sure what you've seen/tried so far, so I'll run you through my standard advice as of this morning, Marty.
    There's a bug with 10.1.0.54, Amanda, that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices (when the convert to 128 kbps AAC option is enabled).
    Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
    (1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
    (2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
    (3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
    (3 and 4 do help with the device-syncing variation.)

  • Itunes has Stopped working - I have tried uninstalling and re-installing  - I am at wits end

    I keep getting the message iTunes has stopped working.  I have tried uninstalling and re-installing iTunes many times.  I had contacted Apple at one point and they told me that I needed to uninstall items in the following order iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and then Apple Application Support.   I have done this numerous times.  Can anyone help or offer suggestions.  Using Windows Vista Home Premium SP2.  Thanks.

    StackHash error has something to do with VISTA's DEP (Data Execution Prevention)
    I managed to get something online from Tech expert and hope this will resolve your issue.  Good Luck!!
    The StackHash error happens any time DEP is found that there is an issue with the program run. The error is related to Data Execution Prevention. Here’s how 99 percent of Vista and Win7 users can fix a StackHash failure:
    Click the run button and open the Control Panel
    Browse to the section of System Maintenance then to the System
    At the left side, select Advanced System Settings link
    In the System Properties Window the top section is named as Performance with the Settings button. Click this button.
    Choose the Data Execution Prevention tab.
    Select the option which reads Turn on DEP for all programs and services except those I select.
    Use the Browse button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
    Click Apply or OK to commit your changes.
    Note: Nobody can guarantied you that described instruction will solve the 100% of the StackHash error issues but you can try it to resolve the problem.

  • Getting itunes has stopped working error when sync wit IPad

    I am getting a itunes has stopped working when sync with IPad, using windows 7

    It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
    Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
    If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
    [iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

  • Itunes has stopped working message when I close itunes.

    Downloaded the latest version(10.7.0.21) of itunes today. Every time I now close itunes I get the following message:
    It only happens once I exit itunes.

    The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
    Any solution?? Need help, please!!
    Macbook pro 13 i7
    Iphone 4
    Ipad 2
    Thanks!!!

  • How to address error iTunes has stopped working when clicking on Get Info to edit song information?

    How to address fix "iTunes has stopped working error" when clicking on Get Info to edit song information?
    When I try to edit song information in iTunes, I right-click on the song and click on Get Info...the message iTunes has stopped working and needs to close message will appear followed by iTunes has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available...I have tried uninstalling iTunes and deleting all its components or files on my pc and reinstalling...I have done this more than a "hundred" times but to no avail...Now I could not consolidate my Library, add important info on the songs, etc...I have searched forums including here but none from the suggestions worked.
    I'm on Windows 7 54bit.
    Please help!

    Thanks! i finished to run Check your iPod with Diagnostics Mode. here is results:
    Retract:15
    Reallocs: 0
    Pending Sectors:0
    Poweron Hours:556
    Start/Stop:5071
    Right now, i am runing Check iPod hard-drive for errors and will let you know if it gets ipod fixed or not

  • Itunes has stopped working when adding to playlist

    I get the Itunes has stopped working message when adding new files to a playlist, has anyone else had this problem, and is there a solution?

    Still having issues :/

  • ITunes Has Stopped Working (10.3.1)?

    So before I downloaded the new iTunes, it kept saying "iTunes has stopped working." when I tried to open it.
    After multiple tries, I finally resorted to uninstalling it, and installing the new version.
    Still, it says "iTunes has stopped working." I tryed the repair option in the Control Pannel for both iTunes and QuickTime. QuickTime opened up just fine, and works as it should. Again, I opend iTunes, but checked the details, and this is what it's saying -
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    iTunes.exe
      Application Version:    10.4.1.10
      Application Timestamp:    4e4e1904
      Fault Module Name:    ntdll.dll
      Fault Module Version:    6.1.7600.16695
      Fault Module Timestamp:    4cc7ab44
      Exception Code:    c0000005
      Exception Offset:    00055bf5
      OS Version:    6.1.7600.2.0.0.768.11
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    From other posts, you usually could fix it from reading the Fault Module Name and repairing the name of whatever it was, but I have no idea what to do with this.
    To play it on the safe side, I am doing a virus scan, but I have'nt downloaded any thing that would carry anything harmful lately.

    Fault Module Name:          MediaToolbox.dll
    Fault Module Version:          1.0.694.7
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh...

  • "iTunes has stopped working" during every startup

    Every time I try to open iTunes, it says iTunes has stopped working. When I open it, it actually works for a good two seconds before it crashes. I've tried to play one of the songs by double-clicking one of the albums and it starts to play until it crashes one second later. I've even tried to open iTunes while my iPod 4G is plugged, and it's actually showing that it's starting to sync every single time. But of course, it's going to crash within a second. This has never happened until today. I've even tried reinstalling it with the latest version. What's up with that? How do I fix iTunes?
    I'm using Windows 8.1.

    Try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    If not try working through TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
    Otherwise for general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Itunes has stopped working and iphone calendar has 10 entries for each event

    "itunes has stopped working", since I tried an update which failed.
    Also when I plugged in my iphone it went straight to restore and not only lost all my recent stuff as you might expect - annoying enough, but has installed at least 10   entries for each event. How do I get rid of them? Tried deleting the event but it doesn't take away every single entry. (And can I get my recent stuff back?)
    These are probably diffferent problems but as my name implies I'm a complete numpty when it comes to the technical terms so please, in lay terms, what should I do?

    Well I seem to have solved this myself...Much to my surprise!
    First the itunes issue. When the itunes update screen came up again it said if you have trouble with this go to Tools (top of itunes panel) and press "download only" which I did and the rest just sort of happened. It uninstalled and then installed.. All I had to do was open each file. Checked my stuff and all there. Checked itunes store and straight in.
    Iphone calendar. Not sure how this happened but it had about 25 - 30 copies of each event. I went through each calendar and by process of elimination deleted the ones that seemed to be causing the problem. I didn't lose any events but all of a sudden there was only one each of them. Bizzaire but true.
    This is a very rare day for me. A Good IT Day.

Maybe you are looking for

  • Please Help! Hard drive problem "Mystery Gb Space"

    I recently ripped a lot of CD's into itunes, so much that I filled up my hard drive. I cleaned up my music by deleting music I didn't need. I also burned a majority of music to CD so that I could delete it off my hard drive. I have a 80gb hard dive;

  • Time machine: Can I target specific folders for back up

    As a default time machine backs up your entire drive. Along with my mac I want to back up a +specific folder+ on my Drobo: an external drive. (it's where I keep my large working files) I don't want to, don't need to and can't back up the entire Drobo

  • Resolved: Use value from select list in pl/sql block

    Hello, I have a form with a select list: P18_BONUSTYPE, the values of which come from a LOV. When the user clicks a button, a page process is used to insert a row into a table. When I use the :P18_BONUSTYPE bind variable in my insert statement I get

  • Part Number for parallel cable connecting SCXI-2400 to SCXI-1200

    If no longer available from NI, would anyone have the (upper) rear connector pinout for the SCXI-2400 so I can make my own cable using half of a DB-25 parallel printer cable and the appropriate AMP connector?

  • M30-107 - replacing the DVD-RW drive?

    I'm thinking about replacing the DVD-RW drive in my laptop. I was wondering if anyone could tell me the steps that would be involved in doing this, or else where I might be able to find such information. Thanks!