ITunes Has Stopped Working on program start
Recently, whenever I open iTunes, I'm greeted with an app crash and window prompt of "iTunes has stopped working".
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 12.1.1.4
Application Timestamp: 54de1991
Fault Module Name: CoreAudioToolbox.dll
Fault Module Version: 7.9.9.6
Fault Module Timestamp: 54ddd41b
Exception Code: c000001d
Exception Offset: 00000000001fa332
OS Version: 6.0.6002.2.2.0.256.1
Locale ID: 1033
Additional Information 1: e51c
Additional Information 2: c3c37ca59ab88edfd3ace298e9bd9694
Additional Information 3: 6546
Additional Information 4: 146b18ecb7553173253bf61665dc5916
I'm also on 64bit Windows Vista.
Greetings ChrisMB95,
Welcome to the Apple Support Communities!
I understand that iTunes on your Windows computer is having an issue launching and giving you an error. In this situation, I would recommend reading over and working through the suggested troubleshooting steps in the attached article.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Cheers,
Joe
Similar Messages
-
I'm using a Dell PC with windows 7. Apple Store cannot open completely. An error message states- iTunes has stopped working, close the program.
I have spoken to at least 3 Techs with no solutions found for this problem. Compatibility mode turned off. Newest Download from Apple site.See HT203206: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
ok i installed new iTunes version 10.3.1.55 and when i launch itunes it says 'iTunes has stopped working' i get to my problem history this is whay i found
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: MediaToolbox.dll
Fault Module Version: 1.0.694.7
Fault Module Timestamp: 4ddeb575
Exception Code: c0000005
Exception Offset: 00250000
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
PLEASE HELP ME!!!!Fault Module Name: MediaToolbox.dll
Fault Module Version: 1.0.694.7
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh... -
I can't open my Itunes program in my laptop computer with windows 8. the message is "Itunes has stopped working. A problem causess the program to stop working properly. windows will close the program and notify you if a solution is available". I reboot the machine, Uninstall and re install the Itune program, stilll the same message pops up.
The first thing to try is System Restore to take you back to a point in time when it did work. If that is not successful, create a new user on the computer. log in with that and see if ID will start. This will tell us if the problem is in the system/program or the user account.
If it works in a new user account, see Replace Your Preferences and in addition to replacing the prefs, empty the InDesign Recovery folder that will be in the same location and the InDesign SavedData file. -
Whenever I connect to the iTunes store i receive an error message "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This causes iTunes to close. I am using iTunes version 10.5.0.142 on a Windows Vista (64) PC. I have reinstalled iTunes selecting the "repair" option and also uninstalled and reinstalled iTunes. Any help will be deeply appreciated. Thank you. Below is the result of the diagnositc.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
HP-Pavilion BN474AV-ABA HPE-150t
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 002FAD94098CD0E0
Current user is not an administrator.
The current local date and time is 2011-11-13 22:08:54.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2cb3fff3fa771d265b0f8ffdcca13b55
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {F4A2029C-16AA-4BDF-8DB7-9EC2A75B5991}
Description: Realtek PCIe GBE Family Controller
IP Address: 192.168.1.6
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Nov 13 21:09:29 2011
Lease Expires: Mon Nov 14 21:09:29 2011
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-13 22:02:08.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: hp DVD A DH16ABLH, Rev 3HD9
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 15:40 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: hp CDDVDW TS-H653R on CDR media at speed 24X.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
Bruce's iTouch, iPod touch (2nd generation) running firmware version 4.2.1
Serial Number: 1C9053CC201
**** Device Sync Tests ****
Sync tests completed successfully.Same exact thing with me. And no help from apple. Just dropped nearly $600 and cannot get a decent working setup.
Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
The crash happens only on iTunes store access. -
Itunes 9.1 wont start, says itunes has stopped working
I have a windows vista home premium 32 bit gateway laptop/pc, with a wired connection for internet. I have had no trouble for 3 years with past itunes but now with 9.0 and 9.1 it simply just wont start at all. When I double click on itunes I get, "itunes has stopped working and windows will notify you if a solution is avaible". I have tried to talk to numerous apple specialists but no can do because for them to troubleshoot with you, one has to own an apple product like ipod with serial number for them to actually help. I got rid of my ipod a long time ago, so I guess the option of talking to a non-robotic person will not work for some reason. A specialist gave me over 10 articles as to why itunes wont start with windows vista, things such as msconfig (changing startup options), uninstalling and reinstalling, having latest updates for firewall, itunes, among others which I already possess, Opening itunes on another user account and other too. I've tried all of these options and the only thing that I gained from all of these articles was I can open itunes on my different user account but when I do, it does not have any of my music on it. I have uninstalled itunes and reinstalled it before and the music has automatically showed up in itunes, but in the user account it does not do this. Does anyone know what the problem could be, it shouldn't be that hard for apple to provide a specialist to sit down after 30 minutes of eating there creme filled donuts and actually provide some customer service for the first time in history. Rhapsody has sat down for 2 and half hours and fixed my problem many times, (there based in the middle east and I can hardly understand them yet they were way more effient than itunes was). All I want is my precious metal music back which I poured over 100 dollars into. Thank you for everybodies support in trying to help me and others with same topic.
+I have checked in task manager and the programs itunes.exe and ituneshelper.exe are in the processes window but the program is not visible on the desktop.+
that usually means your security software is blocking it. Norton, McAfee, or whatever you use - try temporarily shutting it off and see if itunes will fully launch. -
when i open my i3tunes on my computer i get an error message telling me that iTunes has stopped working..the message is as follows...Microsoft Visual C runtime library Program C:\program files (86) iTunes\iTunes.exe R6025 -Pure virtual function call.. How do i fix this
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
iTunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down. Anyone else every have this issue. Any ideas on a fix?
Thanks,For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling -
when i open itunes its normal and then out of nowhere it says "itunes has stopped working" and i have to click 'close program'. help?
Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it. It will now fit the screen. Trouble is, after you close it, you'll have to do it again when you re-start itunes. The good news is it takes all of about 2 seconds. Apple should fix this. Should.
-
iTunes keeps shutting down when I open it up. The message says iTunes has stopped working. A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solutions is found.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried something like the above then try opening iTunes in safe mode (press and hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud Purchases. You may find that iTunes opens normally now.
tt2 -
iTunes stops working. The message says iTunes has stopped working due a problem to the program. How do I find a solution?
Hey there Warrior41,
it sounds like you are unable to use iTunes because it either will not launch without this error, or you get the error when you are using it. Sorry to hear about that, that can be pretty aggravating. I would use the troubleshooting in the following article to help resolve the issue, named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with opening iTunes in Safe Mode and see if the issue persists. If not, the article will help you troubleshoot for 3rd party plugins that may be causing it:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
If that doesn't resolve the issue there are additional steps in the article if needed.
Thank you for using Apple Support Communities.
Regards,
Sterling -
When trying to login to iTunes I receive a message iTunes has stopped working. A problem caused the program to stop and iTunes automatically closes.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Hi, I have a problem with iTunes on my computer each time when try open iTunes appear a window " iTunes has stopped working... close a program " someone can help me how fix it.
See HT203206: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
When I click on the itunes shortcut or the program I get the following message:
ITunes has stopped working. My two options are: Windows can check on line for a solution to the problem or close the program.
It seems that my entire library is not there. If I sync my ipod will it add it back into my library on the computer?
I've even tried installing again and nothing works. Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
ThanksLet's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows
Maybe you are looking for
-
My iphone died after installing iOS 5.
I was going to update my iphone 4 to iOS 5 at the first day it came out. But something went wrong and my iphone died and now it keeps restarting when i try to turn it on. If someone know what to do i be very gladly
-
Query to show Change in Payment Terms BPs
Hi All Since we cannot restrict users from updating Customer Payment Terms if thay have access to BP Master Data, I would like to create a query (to set as an Alert) to show when BP Payment Terms have been updated Has anyone written such a Query that
-
Question about Display Item,pleas help
My problem is that i cannot make my display item to be a display item. In properties i selected display item but it still looks like text item. I just wanted to display content of a table TiA
-
hi i have a popup pronlem its show me problems with my device accesory and interfirence and dont know what do do video sounds not working at all
-
Purchased Activation Code for Aperture does not work
I just installed Snow Leopard and experienced the issue with the old version of Aperture. So downloaded the trial version then bought the Activation Key for £69 but the Activation key they email ed me say "Invalid Code". I cut and paste and retried t