ITunes has stopped working when I click "Get Info"

Anyone can help me please..?
My iTunes has *stopped working* when I right click on any song click "*Get Info*". It just stop and crash. I'm on Vista 32bit. Thanks before...

Well it's working fine again.........................................I don't get it - -

Similar Messages

  • I get a message that itunes has stopped working when I try to sync photos

    I get a message that itunes has stopped working when I try to sync photos. Error message says "APPCRASH ..."
    Can anyone help? Thanks.

    I found the file but when I added it to the  list for the Data  Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

  • Message: itunes has stopped working when I connect ipod touch-windows 7

    message: "itunes has stopped working"    when I connect ipod touch-using  windows 7

    Make sure to check your internet settings or the settings on your wi-fi server (if accessible). You may also want to make sure that your not in a place where wi-fi is obtructed.(concrete walls other machines, etc.)

  • How to address error iTunes has stopped working when clicking on Get Info to edit song information?

    How to address fix "iTunes has stopped working error" when clicking on Get Info to edit song information?
    When I try to edit song information in iTunes, I right-click on the song and click on Get Info...the message iTunes has stopped working and needs to close message will appear followed by iTunes has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available...I have tried uninstalling iTunes and deleting all its components or files on my pc and reinstalling...I have done this more than a "hundred" times but to no avail...Now I could not consolidate my Library, add important info on the songs, etc...I have searched forums including here but none from the suggestions worked.
    I'm on Windows 7 54bit.
    Please help!

    Thanks! i finished to run Check your iPod with Diagnostics Mode. here is results:
    Retract:15
    Reallocs: 0
    Pending Sectors:0
    Poweron Hours:556
    Start/Stop:5071
    Right now, i am runing Check iPod hard-drive for errors and will let you know if it gets ipod fixed or not

  • Itunes has stopped working when I double-click a song

    Well my itunes usually take a while to start up because I've got a lot of music and videos in it, but today it takes no time to start, but when I try to launch a song I get the 'Itunes has stopped working Windows is looking for a solution' message, I repaired it, doesn't work, uninstalled then reinstalled it, doesn't work neither.
    It can't play music, videos or open Apple Store, but otherwise it doesn't crash at all, I can create new playlists etc.
    And when I right click on a song and choose 'obtain information' I get a blank window with normal buttons like 'OK' or 'Cancel' but nothing else, when I click on a button Itunes crash...
    Please!
    I'm running on Windows 7 64bits
    And by the way I made a system clean up yesterday, so it may be caused by this...but how can I undo it :S

    Well it's working fine again.........................................I don't get it - -

  • Installed update 11.1.3.8 on windows 8.1 now get message itunes has stopped working when trying to acess itunes store

    itunes was working fine prior to installing 11.1.3.8 on windows 8.1 now when trying to access itunes store get error message itunes has stopped working.

    i have the same problem no radio stations at all bit shabby hate technolgy now adays

  • TS1717 Error message received "iTunes has stopped working" when plug my classic ipod to laptop running window 7. It was fine before. Any idea what might be the problem and how to get it fixed? thanks!

    I have received window error message "iTunes has stopped working" everytime I plug my classic ipod to the laptop which running window 7. iTunes was working fine with the same ipod, but starts to receive the error msg. after the second plug to update the music files this morning. All the music files were removed from the ipod. Any idea what might cause the problem and how to get it fixed? thanks!

    Thanks! i finished to run Check your iPod with Diagnostics Mode. here is results:
    Retract:15
    Reallocs: 0
    Pending Sectors:0
    Poweron Hours:556
    Start/Stop:5071
    Right now, i am runing Check iPod hard-drive for errors and will let you know if it gets ipod fixed or not

  • Itunes has stopped working when trying to open store

    I have gone through the uninstall/reinstall many times. Redid host file. Flush dns. Have tried many things. I noticed on one conversation on here. To go to the Action Center and click on itunes. It is saying a fault in the webkit.dll. I have no clue what that means or what I need to do to fix the problem.
    I did notice that when I uninstalled the last time that when I reinstalled I no longer had Quicktime. So installed that, but still no luck
    I have Norton 360 and Windows 7 64 on my laptop. We also have a desktop with the same, but the desktop is able to open the store. I am a tad confused on why mine is not. I can open itunes see the library then when I hit the itunes store it sits for awhile then it comes up with itunes has stopped working. Please if someone could help.

    It shows in my downloads, starts downloading, and when it gets to the end of a song, I get the message "iTunes has stopped working" and choices to close or debug, etc.
    Head into your Problem Reports and Solutions control panel (or the Windows 7 equivalent) and open your Problem History. Look for iTunes Problems reports that seemed to occur at the time that you had the Store troubles.
    Open the reports and have a look through them. Do they all seem to say the same thing? If so, paste the contents of a typical report into a reply here. (Fingers crossed, that may give us a heads up on the cause of the errors.)

  • "iTunes has stopped working" when going to iTunes store

    Opening iTunes works fine, until I click on the "iTunes store" button. The I get the message "iTunes  has stopped working
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
    This happened just after upgrading from windows 8 to 8.1
    "view account" produces the same error.
    Login into account works fine. (menu bar at top left; iTunes store > sign in)
    I'm using iTunes 11.1.2
    C:\Users\username\App Data\Roaming\Apple Computer\iTunes\iTunes Plug-ins\ is empty
    Quicktime starts fine.
    Unintstalled and reinstalled iTunes.
    Same problem occurs in safemode (ctr shift start up).
    I tried deleting the SC Info.sid* files, but problem still occurs.
    Updating genius works fine.
    Still occurs when running as administrator
    Ran repair from the control panel on both iTunes and quicktime.
    Any suggestions on what I can do about this?

    I am running Windows 8.1 and iTunes 11.1.3.8.  I found a simple solution by browsing through the support communities.  Here it is:   Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support to: C:\Program Files (x86)\iTunes
    This worked for me.  Good luck.

  • "Itunes has stopped working" when attempting to play purchased video

    I have purchased multiple episodes of The Vampire Diaries from Itunes, to which I have already watched. But when I went back to watch them again, it gave me the error "itunes has stopped working". To which, itunes started up again. I tried to click it again, and got the same error message. I have a windows vista. and this problem is really making me mad. Anyone know how to fix this?

    I am also having this problem and from the looks of it I'm going to have to sit back(unfortunatly) for an answere to get back to me.
    I feel the same frustration as you Krazybald, I've been wanting all day to watch a movie from my purchased movies and cannot.

  • "itunes has stopped working" - when syncing 4s, itunes stops at step 6.

    Since updating to 10.5.1.42 itunes stops at step 6 - determining tracks to sync - when syncing with my 4S. The iphone is running 5.0.1
    I've uninstalled and reinstalled itunes, but it still does it! Windows 7 gives me the 'itunes has stopped working and is searching for a solution' line.
    Needless to say; it doesn't find one...

    Here is what worked for me for both 10.5 and 10.5.1 after hoursof frustration with Itunes stopping and shutting down in the middle of a syncor tranferring Apps downloaded on my Ipad2 or Iphone 4:
    Start iTunes in iTunes Safe Mode:
    1.  hold down the Shift and Control key together and clickto start iTunes.
    2.  when you see the iTunes icon in the task bar, click onit.
    3.  you will get a box that says "iTunes is running insafe mode.  Visual plug-ins you have installed have been termporarilydisabled."   [I don't know what plug-ins I installed but youshould clearly see that these so-called visual plug-ins are likely the cause ofyour issues];
    4. click Continue to open iTunes.
    You could already have your device connected to your computer ordo it after opening iTunes in its safe mode.
    Now press your sync button and everything should work fine.
    I also disabled Genius in iTunes preferences but I'm not sure ifthis is one of the issues causing these types of problems.
    I hope this works.  This may be the workaround for all ofus Windows 7 64-bit folks.

  • "iTunes has stopped working" when attempting to launch

    First off, I've tried everything the Apple troubleshooting section has suggested (uninstalling iTunes+Quicktime, clearing temp file, etc), and I've yet to have any success.
    This is extremely frustrating, and annoying. I've purchased at least ~$150 of iTunes store material, and I am unable to add/remove media to my multiple iTunes.
    Basically, whenever I double-click the iTunes icon, I'll get the busy-cursor, and then Windows announces "iTunes has stopped working" and has no suggestions other then downloading the latest version of iTunes (which hasn't worked).
    I've been a big fan of Apple products for years, and this is the first time I've had trouble with either the software, or the hardware.
    Any help will be greatly appreciated.
    Message was edited by: Bigtex5150

    First my iPod, when plugged into the USB port, my computer kept saying that nothing was there, when i tried to upgrade my iTunes to 7.5 version, it wouldnt let me, my computer kept reading Invalid Drive: F:/, i had to use someone elses computer to make a copy of the 7.5 version on to a disk, then i was able to uploaded and run it to my computer. The second part of this trick, was having to get iTunes and my own computer to recognize that my iPod was in the USB connection, finally once i upgraded to 7.5, as soon as i plugged in my iPod into the computer, iTunes recognized it, i quickly went straight to Restore Ipod, turns out that my iPod had a "BUG" thats why the invalid F drive was showing up, thats why i could not upgrade to 7.5, and how a bug got into my ipod sense everything i have ever downloaded and uploaded has been off of Apple.s website, they assure that their songs are infected free, but i beg to differ since it took 4 years for my iPod (which was a week ago) to actually have a serious problem.

  • "iTunes Has Stopped Working" when syncing iPod Touch

    So in the last few days, I've been getting an error message when I try to sync my iPod Touch 2g with software version 3.1.2. After a few seconds, I get this error message "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." It only happens when I plug in my iPod for syncing.
    I've been up and down the message boards here looking for a solution and I can't seem to find anything that works. I've uninstalled/reinstalled quicktime, then the iTunes software, I've deleted and remade my iTunes library file... I'm just at a loss. Here's the error information windows gathered up...
    Source
    iTunes
    Summary
    Stopped working
    Date
    1/10/2010 1:45 AM
    Status
    Report sent
    Description
    Faulting Application Path: C:\Program Files (x86)\iTunes\iTunes.exe
    Problem signature
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 9.0.2.25
    Application Timestamp: 4afca401
    Fault Module Name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 00000000
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Extra information about the problem
    Bucket ID: 830098715
    Anyone know how to help???

    Hi Zainabe_nachaby,
    If you are having issues with iTunes unexpectedly quitting when syncing, you may find the following article helpful:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Regards,
    - Brenden

  • ITunes has stopped working when connecting new iPhone 6

    I am getting what seems to be a common error "iTunes has stopped working" which I have tried many different tricks for fixing that I have found online, but nothing seems to work.
    I have been using an iPhone 5 and backing up and syncing with no problems, the only problem being when I try to access the iTunes Store. This didn't bother me too much as I can access the store on my phone and everything else on iTunes worked fine.
    But today I bought an iPhone 6 and as soon as I connect it (whether iTunes is already open or opens when I plug the iPhone in) I get the above error message and iTunes closes. So I am unable to sync my back up on to the new phone or use it at all.
    Can anyone help with a recent fix for this, or a way around it?
    I have tried copying recommended files into the correct folder, re-installing, opening as administrator and many other things I have come across online, but majority of these seem to be from a year or more ago. I am using Windows 7 on a PC, with the latest iTunes that I have just re-installed (again).
    Any help would be really appreciated!

    Same here....also when I restart iTunes afterward, all my devices don't even show up in iTunes at all until after you restart the computer
    Even then, the problem persists. And I've tried all kinds of troubleshooting techniques

  • ITunes has stopped Working when using Ipod shuffle 3gen on Windows Vista HB

    Itunes keeps shutting down when I insert my Ipod shuffle into the usb connection of my latop. I am using a Windows Vista Home Basic for an OS.
    Not sure if this is a Vista, Apple issue, or something else...
    I have contacted apple about this and uninstaled/reinstalled Itunes. Yet after all this, I get the same error message. The message reads:
    "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
    As far as I know Vista should be compatible with iTunes and it is until I actually try to use my shuffle (newest model). Its weird because my shuffle works fine on a second computer that has Windows XP for an OS...
    Does anyone have a solution to this??
    Thanks in advance!

    i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)

Maybe you are looking for

  • Importing already-made SQL*Loader control files in OWB 10g

    Hi all, Suppose that I have a certain amount of already hand-made SQL*Loader control files, say 50 or so. Each of these control files have a variable quantity of fields. I feel really lazy, so I would like to know if it is possible to import directly

  • Soft returns not importing

    Hi. I recently impoterd a Frame 7.1 Chapter into RoboHelp HTML 8.0 and everything worked okay with the exception of soft returns. For some reason it didn't import these and I was left with large strings of test which I had to fix by hand. Any ideas?

  • File (xml) xi IDoc

    The messages in the messeage monitoring are showing an general error and the error type is XI_J2EE_ADAPTER_XI_HANDLER. Can you please suggest what needs to be done? Best Regards Fatih

  • BI Publisher Desktop install on Windows remote desktop

    Hi all, Is there any way to install BI Publisher Desktop on windows remote desktop (terminal services)? If I install this currently as one user, the other user can not access (despite having all the correct security settings). The real issue is I thi

  • Exchange 2007 SP3 latest update rollup

    I would like to install the latest update rollup for Exchange 2007 SP3.  I was reading and found Update Rollup 12, is this the latest version?  No other update rollups are installed. I did the SP3 update by installing on the hub transport first, then