ITunes help needed, issue while restoring iOS device

Hello everyone
Today i decided to restore my iPod touch 5th generation, which was in DFU. While i was downloading the iPod firmware (1.3GB) suddenly the wifi stopped and itunes said that there was an error and so restarted the download from the beginning.
The problem is that i cannot find out where the file wich I was downloading at the beginning is, considering that i was almost at the end of the download and Idon't want to have more that 1GB corrupted fiel on my hard disk.
Can anyone tell me how to find out where it is and delete it?
Thanks

The files are located here: ~/Library/iTunes/iPod Software Updates
Note: The tilde "~" represents your Home directory.

Similar Messages

  • How to fix itunes error 1611 while restoring ios 4.3.2 , and when i restore to 4.2.1 the can be ok.plz help me

    how to fix itunes error 1611 while restoring ios 4.3.2 , and when i restore to 4.2.1 the can be ok.plz help me

    have a look at this support article.

  • HT201210 Unable to activate, backup, update or restore iOS device or iPods using iTunes

    Help! I just got an Ipod Touch Generation 3 and am unable to activate, backup, update or restore iOS device or iPods using iTunes.

    Read this.

  • I deleted my music through the "manage storage" section in the options to make room for the ios update awhile back. Now I can't get any music back onto my device through itunes. (I've tried restoring the device twice to no avail)

    I deleted my music through the "manage storage" section in the options to make room for the ios update awhile back. Now I can't get any music back onto my device through itunes. (I've tried restoring the device twice to no avail)

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • What happens if i enter phone number while erssing ios device from icloud?

    I want to remove my iphone4 device from find my iphone over the cloud. Because i forgot the passcode of my iphone. Now i want to restore it from a backup.
    itunes wouldn't let me do it because "find my iphone" is enabled in iphone settings. Moreover i was able to remove device from icloud. But itunes still asking me to turn off "find my iphone" from iphone settings. What i am missing here? is it because I entered phone number while erasing ios device from icloud or something else?

    If you force it into recovery mode as explained here: http://support.apple.com/kb/ht1808 you'll be able to restore it.

  • How can iTune-synched photos be deleted from iOS devices if the iTunes computer is no longer available?

    How can iTunes-synched photos be deleted from iOS devices if the iTunes computer is no longer available?
    This can happen because the iOS device is on travels distant from the iTunes computer, because the iTunes computer is on travels distant from the iOS device, because the iTunes computer has failed permanently, because the iTunes computer has been stolen, etc.

    KRDHarris-
    The only possibility I can think of, is to consult with an Apple Store Genius.  See if there is some kind of Apple proprietary software or diagnostic tool that can do it.
    I do not think you want to, but you could go to Settings-General-Reset-Erase All Content and Settings.  If you decided to do that, you might be able to restore from a previous backup when you get home.
    Fred

  • Audio Sync Issue streaming to IOS devices?

    Hi. We are trying to stream live content to both flash and IOS devices using the FMIS 4.5 and the stock livepkgr application. We are using the FMLE 3.2, h.264, with the main concept AAC audio codec. We have set the streamsynchronization variable in the FMLE XML setup file to "true"
    Flash player equipped devices can see the stream fine, with no audio issues. For IOS devices, the audio is in sync when you first connect, but after about 30 seconds the audio is starting to get out of sync. If I stop the playback on the Ipad, and re-start, it is in sync again, but goes out again...
    Any ideas?

    Make sure you have updated mainconcept encoder.. Here is an issue which came fixed in mainconcept plug-in version 1.0.6 .. More info at http://www.mainconcept.com/products/apps-plug-ins/plug-ins-for-adobe/aac-encoder.html
    Or use FMLE on Mac(if you have)..

  • Ipod touch itunes help needed.

    I purchased an album of ITunes the other day on my ipod touch and downloaded it. After a couple of hours of listening to it I got a notification for the latest update. After install my latest purchase disappeared from my music. I tried going to the iTunes app and redownloading it but when I clicked on the cload symbol it just said already downloaded. No problem I thought so I loaded iTunes on my Mac and tried to transfer it that way. I get the copying to my ipod come up for the correct amount of songs but it still doesn't show at all on my ipod. Any help would be appreciated. Thank you.
    Btw I can still play the album in iTunes on my mac fine.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Manage Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

  • ITunes will not update Apps on iOS devices

    I recently purchased a new MacBook Pro.  I had all of my apps transferred to iTunes on the new computer.  Everything worked fine except iTunes would not update the apps on my iOS devices.
    Apple support spent several hours attempting to fix my problem to no avail.  I discovered the problem by accident.
    When I selected "Automatically install new apps while syncing" iTunes asked me to authorize an old iTunes account I had decomissioned a couple of years ago and had merged it into all of my devices.  iTunes in the new computer was still tracking the old account.  After selecting "do not authorize" for the old account, iTunes on my Mac synced the apps just fine.
    I hope this helps someone having the same problem.

    Thanks for the help. I think it works but only after new reload the data. That's not good when one is without Wifi. Sorry my english is not so good

  • Any reason why iTunes would not sync with my iOS device using USB cable?

    Hi there,
    what could be the reason if iTunes won't sync with my iOS 5 devices via USB? The devices are recognized in iTunes (I can see the devices there and all the content stored on these devices), but the sync does not work...
    BTW: I tried several different USB cables already...
    I am using Mac OS X Lion on a MacBook Pro Late 2011.
    Thanks
    Ralf

    I can't recommend any learning resources, especially since what you are going to be doing likely falls under the category of basic untutorialed coding.
    When I decided to take the plunge I had a project in hand that I had just created in AS2, and what I did was restart the project using AS3, tackling each coding element as it came up. One nice thing about AS3 is that it is much better with pointing out coding errors--while cryptic at times, you get better at interpretting them with time--and when you don't get any, chances are you are on the right track.  So you try something and if it flies, great, and if an error message pops up, you pursue solving the error.
    In most cases, the Flash help documents are a sufficient reference, but in other cases I would rely on Google.  Just as a for instance, you mention using key listeners... That would be something I would have serach Google using "AS3 key listener", and I'm willing to bet you'd find something to get you over the hump.  Sometimes it helps to add "tutorial" to the end of a search string... it can help weed out all the others that have psotings on forums that are offering problems rather than solutions.

  • ITunes doesn't connect to any IOS device

    Regrettably I've installed IOS 8.0.2 on my iPad2 and now it is super slow.  I wanted to do a full backup to my computer and then setup as a new device hoping a clean install would make it a little bit better.  Unfortunately, I cannot get iTunes to recognize the device.  I've gone through everything I can find online, I've uninstalled all of the apple apps and reinstalled twice, followed all of the steps in iOS: Device not recognized in iTunes for Windows to no avail.  The iPad shows up in Windows, I choose the "Trust this computer" when it connects on the iPad but iTunes doesn't see it at all.  I've also tried my iPhone 5 that still has IOS 7 and my son's iPhone6 and none show up.  I'm thinking there must be some registry corruption or temp file corruption or something.  Anyone have any ideas to try at this point?
    This is the info from the iTunes diagnostic connectivity tests:
    Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
    Dell Inc. Precision M4500
    iTunes 11.4.0.18
    QuickTime not available
    FairPlay 2.6.16
    Apple Application Support 3.0.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.0.23
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    **** Device Connectivity Tests ****
    iPodService 11.4.0.18 (x64) is currently running.
    iTunesHelper 11.4.0.18 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Ricoh 1394 OHCI Compliant Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPhone 5 (GSM) running firmware version 7.1.1
    Serial Number: xxxxxxxxxxxx
    iPad 2 running firmware version 6.1.3
    Serial Number: xxxxxxxxxxxx

    you can try to connect your iphone in a different usb port ,note you may need to rebooth your pc first . if this doesn t work you may want to see if you have the latest itunes update .

  • ITunes not syncing play counts from iOS devices

    I realize this is a small thing to some people, but my music-listening abnd playlisting habits are fairly OCD and are depenedent on play count tallies....
    Long story short, I updated my iTunes software the other day to 10.5.3. Now, when I plug my iPad (1) and iPhone(4s) in to the iMac to sync, the playcounts and last played data does not appear to by syncing. Is anyone else having this problem?
    I actually spoke to someone at applecare, and they suggested selecting "homesharing updates playcount" in preferences, which I did, but that does not appear to affect anything when I amsyncing directly from the iOS devices. I have not started using itunes match yet, partially because of concerns about play counts, so I am still syncing the old-fashioned way, with a cord.
    Any help would be appreciated.

    http://www.apple.com/feedback/itunesapp.html

  • Why does streaming iTunes Match to Apple TV from iOS devices work fine but from my Mac Mini not so fine?

    As the topic heading states... if I airplay anything from an iOS device I have no issues but from my Mac Mini I am plagued with problems. If I airplay iTunes Match to Apple TV quite often the sound will drop or stutter. I will have to pause the song and start it again.
    Also I can be playing everything fine and then all of a sudden my Mac will lose sight of the Apple TV and the only thing that will resolve it is restarting the Apple TV.
    Both my Mac and Apple TV and iOS devices are running the very latest updates.

    Information.
    AirPlay Mirroring - How to Use
    AirPlay Mirroring - Troubleshooting
    AirPlay Mirroring - Using
    AirPort Extreme – Auto Mount USB Disks
    Apple TV – How to Use AirPlay Mirroring

  • HT4623 update stuck in progress bar while restoring ios 7

    iphone 4s restoring ios 7.0.4 tried 20 times and keep getiing error 14 and stuck on progress bar help please ??
    if needed i well post error log

    It's updated to the newest version.

  • Urgent help needed, can I restore N900 Backup file...

    i owned a N900 (now sold out)
    before selling i took backup of contacts from backup restore option in application section
    now i bought a N8 but i m not able to restore my contacts
    1. is there any way to restore them in N8?
    2. if not, can i convert them in TEXT or any readable format
    urgent help needed
    thanks in advance

    The backup procedures built into the phone are only designed for restoring to the same phone (ie: in case or data corruption, software update or repair etc.), they can't usually be used to restore to a phone with a different operating system.
    You should have backed up with Ovi Suite before selling the N900, that would have been able to restore to the N8.

Maybe you are looking for

  • Error while processing message to remote system

    Hi, I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i

  • How to tell if application is hanging or still working?

    I occasionally ask photoshop to do very large jobs such as joining many images into panoramas. This can take a very long time, and sometimes Photoshop will show as 'not responding' in red on the activity monitor or force quit window, and will hang un

  • Unable to invoke a protected web service from PL/Sql

    Hi All I am trying to invoke a protected web service from Plsql. But getting the below error. error message is ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00104: Warning: element "html" is not declared in the DTD Err

  • How to make a duplicate CD?

    I have lost my copy of Director MX 2004 (MAC) CD. My program is registered with Adobe but I am told they cannot send me a duplicate CD because it is too old. I have the program installed on my Mac at work but I want to take it off and put a copy on m

  • Color Askew

    Upon upgrading to Aperture 3 from 2 some of my B&W photos have rebelled and taken on color despite the settings in the inspector. One has become purple, another has elements of red. The overall saturation of the image is up, as is vibrancy, but indiv