Itunes helper.exe entry point not found -

Hi can anybody help - after having normal service and using itunes normally I now keep getting this message when I install itunes and I have no idea what to do - my ipod also appears to be unusable as it will not charge when plugged in to computer and do not know if it messed up the computer or if the computer messed it up. Have tried to install itunes many times but always the same message and it will only go away when I uninstall it. Any advice on next step appreciated. Thank you.
Message is:
'The procedure entry point GdipGetDC could not be located in the dynamic link library gdiplu.dll'

Hello,
Try working through the steps in this document, 1 by 1 in the order in which they are presented.
http://support.apple.com/kb/HT1926
CG

Similar Messages

ITunes Helper.exe - Entry point not found error after upgrade

I just tried to install the latest iTunes software for Windows on two separate PCs running XP Pro SP3 and get the same error on both PCs at every windows startup: iTunes Helper.exe - Entry point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll. Is this a known issue with a fix?

Hmmm. Roy B has some advice on that one in the following post:
http://discussions.apple.com/thread.jspa?messageID=10208523&#10208523

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

When I turn on my computer,an error message says "AppleSyncNotifier.exe-entry point not found The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll". Can't access itunes store,sync,buy etc. Help...

When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

After upgrading to 10.5 itunes.exe entry point not found. tried reinstalling 3 times gives error 7, tells me to reinstall. help please!

After upgrading to itunes 10.5 itunes.exe - entry point not found message appears. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll (this mesage appeared) Reinstalled 3 times then I get message itones not installed correctly error 7. I give up. Help!

I started up and plugged in my iPad and then the following message came up:
       iTunes
❗️This iPad cannot be used because the required software is not
    Installed. Run the iTunes installer to remove iTunes, then install
    the 64-bit version of iTunes.
                                                                                         OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
      Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
    failed to start. Verify that you have sufficient
    Privileges to start system services.
   Abort.               Retry.                Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
      iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
      Your computer. Try reinstalling the program to fix the problem.
                                                                                       OK
Press OK and then the next message:
       iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
      Error 7 (Windows error 126)
                                                                                       OK
Any suggestions?

When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

ITunes.exe - Entry Point Not Found itunes will install but wont run!!!!!!!!

I updated itunes and it wont work. i unistalled all apple apps, about 5 to 10 times. i get this message on my HP 530,32 bit windows vista. At the top in the error window it says
*iTunes.exe - Entry Point Not Found* Then under that in the error box it says:
*The procedure entry point*
*QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll.*
What do i DO PLEASE HELP ME OUT!!!!!!!!

I found the qtcf.dll file in the sys32 moved it to the desktop tried iTunes and still same error message as above.
Okay ... sometimes there can be multiple copies of them lurking about on a PC.
Try heading into Computer, and typing QTCF.dll in your Search field. When Vista tells you it can't find the file, click "advanced" and tick the "Search hidden, non-indexed and system files (might be slow)" and then start another search.
This search *will indeed be slow.* Wait until the green progress bar up at the top of the screen has completely vanished, otherwise you might accidentally stop the search too soon.
What copies of QTCF.dll do you find, and where are their file locations? (The default location on a 32-bit Vista PC is in C:\Program Files\QuickTime\QTSystem\QTCF.dll)

After downloading the latest version of iTunes and updating my iPhone everytime I turn on my computer I get a message that reads: AppleSyncNotifier.exe - Entry Point Not Found. Does anybody know what this means?

After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.

Yes. I just solved the problem on my PC. Here goes...
Issue: My Windows7 computer was producing the pop up box with the error text as you described.
The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
Solution:
1. You need to use the Windows File search feature to look for the name "SQLite". This will quickly locate the offending DLL in the other application.
2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
3. Uninstall Mobile Me.
4. Restart your PC.
5. Reinstall Mobile Me.
6. Mobile Me should sync at this point, but if not, restart the PC once again.
In my case, the offending program was my Aptana Studio development application. I had recently the SQLite3 database to my Ruby On Rails configuration...
This is where the file was located:
C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
I hope this helps,
Ron

Having trouble downloading itunes on my computer. i keep getting a error message that reads: apple sync notifier.exe- entry point not found.

Hello, can anyone help me out there? Im having trouble downloading itunes on my computer.
Ikeep getting a error message reading:
#1 applesyncnotifer.exe- entry point not found.
#2 the procedure entry point sqlite3-wal-checkpoint could not be located in the dynamic link library. sqlite3.d11.
#3 service 'apple mobile device' (apple mobile device)
failed to start. Verify that you have sufficient privileges to start system services.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Have tried several times to do all that was suggested BUT itunes still not downloading correctly....still recieving---iTunes.exe - entry point not found - the procedure entry point. AVCFPlayerSppliesMediaSe;ectopmCriteriaAutomaticallKey could not be locat

HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
itunes was not installed correctly. error 7 (windows error 127) --
I have already tried (4 times) completely unstalling and reinstalling as was suggested But didn't fix the problem.
HELP---CAN ANYONE SUGGEST SOMETHING ELSE TO TRY??

HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
That one can be produced if you have an older version of Apple Application Support on the PC than is required by iTunes version 11.1.4.62. (The required version of Apple Application Support is included in the standard iTunes installers, but for some reason it hasn't been updating properly for some folks.)
Let's try updating your Apple Application Support to version 3.0 by doing a standalone Apple Application Support install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, can you launch iTunes without the error now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!

hello, can somebody please help me...
Everytime i open iTunes it comes up with this error message:
The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
Please help me, Thanks!

*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

ITunes.exe - Entry Point Not Found - QTCF error popup - can't open iTunes

Hi, whenever I try to open iTunes I also get this message:
iTunes.exe - Entry Point Not Found
The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll
I've tried uninstalling iTunes then reisntalling, uninstalling Quicktime, rebooted and I still get the same problem. I also moved QTCF.dll into iTunes. Still get the same error. I also tried a system restore, and I STILL get the same error.
I tried removing everything and turing off my antivirus and I still get this message and my iTunes does not work. Also when the message comes on it will not go away until I re-start my system. Any help out there on this???
Thanks.

*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

CSS 8.3 in Win7 won't launch - error re: css_admin.exe Entry Point not found... Help

New install of Win7 / all Win7 drivers installed & working
Except... during launch of CSS 8.3 (w & w/o patch installed - tried both ways), an error window pops up with:
css_admin.exe - Entry Point Not Found (title bar)
(Red X in window)
The procedure entry point
??0LocalFileFormatTarget@xercesc_2_7@@QAE@QBQAVMemo
ryManager@1@@Z could not be located in the dynamic link
library xerces-c_2_7.dll.
?? What is all this stuff mean ??
(the underscore is NOT present in the window, by the way...)
HELP! Anyone have ANY idea what the above lingo is re CSS and why it won't launch without popping up a window with this error, whatever it is??
I'm days into this reinstall and this is my "last" hangup / called support and they won't touch it since i didn't BUILD it with Windows 7 from them... just don't get this mindset. Only spent 5 digits (around $20,000 +) with Lenovo so far last year / may be the last dollar - I've run into many issues with support lately, for one the T61p I have has had 2 sys boards swapped, processor, 2 keyboards (after "loose screws from sys board swap" were found rolling around inside - yes, loose) among many other issues / only TP I've ever had issues with / want to stay with them, but if I have to fight city hall to swap out a lemon, heading out into the wild blue.

Try the following user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

APSdaemon.exe entry point not found? also itunes won't open.

ever since i updated my itunes/quicktime, this has been popping up at startup. today i tried opening itunes and i also got an error "itunes.exe entry point not found. the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll". earlier, i had an error with sqlite3 but i managed to fix it my copying the file elsewhere.
not sure whats going on though. thanks for the help in advance.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

Updated itunes and getting errors messages: iTunes.exe-Entry Point Not Found

After updating itunes, I get the message iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
Then another error message tells me: iTunes not installed correctly. Please reinstall. Error 7 (Windows error 127). I've tried to repair which looks successful until I try the desktop shortcut as well as going into the exe file in program files. Still the same message. Operating a windows XP service pack 3 with 32 bit. Help would be most appreciated.--No problems with itunes until this recent update.

iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Itunes helper.exe entry point not found -

Similar Messages

Maybe you are looking for