ITunes Helper Module has stopped working

I just downloaded the new version of iTunes and now iTunes and Quicktime wont open at all. When I click on iTunes or when I first turn the computer on, a window pops up that says the iTunes Helper module has stopped working. Then another window pops up right after that says "iTunes has stopped working". It checks for a solution to the problem and then says "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." When I try to open QuickTime, it says "Runtime error! Program:C:\Program Files\QuickTime\QuickTime Player.exe This application has requested the RunTime to terminate it in an unusual way." I have Vista which seems to cause problems with the firewall and iTuens, so I turned off the firewall from my security software, switched on the windows firewall, and made sure the settings were right. I even tried doing a System restore to the previous version (same problems) and then tried reinstalling the new version (Still same problems). Anyone have any suggestions?!?!

hey stess,
I have the exact problem you have. I tried deleting (went into program files and deleted the folders ) from my system and reinstalling it. It worked until i rebooted my system, I am still on xp. The restore doesnt help either. It cant be my ipod ( its quiet old!) as it isnt even connected to my system at start up. I think maybe a bug with the new version that will eventually have more and more users affected when they update. I f i find a solution I will post asap... good luck

Similar Messages

  • Re: Pressing FN+F5 message: IGFXEXT module has stopped working

    When i press Fn F5 i get the message IGFXEXT module has stopped working and i cannot change my monitor configuration. I briefly see the icons but when i cancel the error message they disappear.
    I have downloaded and install ed the 09/10/08 Intel Driver from the Toshiba download.
    What is the problem and how can i fix it. It has been present since i bought the machine.

    Hello
    The fact is that all drivers, tools and utilities must be installed in the right and defined order. Toshiba people do exactly the same and later made recovery image. For your own installation the principle is the same. All offered stuff on Toshiba support and download page should be installed following Installations Instructions document.
    Unfortunately this document is not available for this Portege. So, try please to install and configure Vista following this installations order:
    Windows Vista SP1
    Intel(R) Chipset Module V8.3.0.1014
    Intel(R) Robson(Intel iMSM Driver) V1.5.0.1013
    Intel(R) Crestline-GM / UMA Driver V7.14.10.1329
    or
    AMD M82XT /M86 Driver V8.452.2
    Conexant CX20561 Audio Driver V4.36.6.0
    Marvell 8040/8055 LAN Driver V10.51.4.3
    Synaptics Touch Pad Driver V10.1.7.0
    Alps Touch Pad Driver V7.0.302.8.1
    Modem Driver V7.70.00.00
    Netwaiting V2.5.52
    Intel Golan/Kedron Wireless LAN Driver V11.5.0.32 or
    Atheros Wireless LAN Driver V7.4.2.40.32.1
    Realtek RTL8187B Wireless LAN Driver V6.1116.1226.2007
    Chicony Camera Software V6.2.238.1217
    Bluetooth Stack for Windows by Toshiba V6.10.02T
    CIR Port Driver V7.1.62.2012
    TOSHIBA Value Added Package V1.1.14
    TOSHIBA Hardware Setup Utility V3.0.1.0
    TOSHIBA Supervisor Password V3.0.1.0
    TOSHIBA SD Memory Utilities V1.8.1.1
    Authentec AES1610 Fingerprint Utility V7.9.0.4(20080202)
    TOSHIBA ConfigFree V7.1.26
    TOSHIBA WPS Library V1.003
    TOSHIBA Assist V2.01.05
    TOSHIBA Speech System V1.00.2514
    TOSHIBA Extended Tiles for Windows Mobility Center V1.01
    TOSHIBA Remote Control Manager V2.3.0.8
    CD/DVD Drive Acoustic Silencer V2.02.00
    Toshiba HDD Protection V2.0.2.3
    TOSHIBA Face Recognition V1.0.3.32
    TOSHIBA TRS Driver V4.0.2007.1115
    I hope this will help you.

  • ServiceLayer modul has stopped working

    I have a problem, when I connected my phone to the computer using data cable and run PC Suite, i get an error message "ServiceLayer Module has stopped working" and the phone could not connect to PC Suite. Likewise, if using Bluetooth can not be connected.
    I am running Vista 32bit, please help me solve this problem.

    Hi guis,
    I have the same problem and I have uploaded a dump file generated by the Windows Event Viever.
    You can download it at:
    http://www.uploading.com/files/7V26R6GZ/Errore-Nok​iaPCSuite.txt.html
    Please solve this problem ASAP.
    I really need PcSuite.
    Thanks a lot.
    Maurizio
    Attachments:
    Errore-NokiaPCSuite.txt ‏2 KB

  • Pressing FN+F5 message: IGFXEXT module has stopped working

    Pressing FN+F5 message: IGFXEXT module has stopped working
    I am using Vista
    Model - Portege M700

    With FN+F5 you can switch between the monitors.
    The igfxext.ext belongs to the Intel common user interface and its stored in the path %system%\igfxext.exe.
    So in your case I would try to update the display driver. I think this causes the error.
    You can find it on the Toshiba website:
    http://eu.computers.toshiba-europe.com

  • Pwmif64v.d​ll PC-Doctor Module has stopped working

    Hey everyone, I have a W510 4318CTO (still under warranty) and have recently I've been getting this PC-Doctor Module crash message every time I come home from work.  Doesn't seem to matter if I've recently rebooted the machine or not, but it comes up constantly and checking for a solution comes up with nothing.  From what I can tell, this dll is a Lenovo dll, found under "C:\Program Files (x86)\ThinkPad\Utilities".  Is anyone else having these problems? Any suggestions on how to fix this?
    "PC-Doctor Module has stopped working"
    Problem signature:
    Problem Event Name: BEX64
    Application Name: pcdrrealtime.p5x
    Application Version: 6.0.5849.23
    Application Timestamp: 4e08946f
    Fault Module Name: pwmif64v.dll_unloaded
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 4f4defbf
    Exception Offset: 000007feed455f48
    Exception Code: c0000005
    Exception Data: 0000000000000008
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional Information 1: 866d
    Additional Information 2: 866d0a7bdb9f4d9f5a1f5420ad626147
    Additional Information 3: 8a2f
    Additional Information 4: 8a2f64be9d67ea5a45e1fb0f65b08f03
    Thank you,
    Steve

    Seems to me this is a link library that is part of the Lenovo Power Manager group. I would suggest initially uninstalling the Lenovo Power Manager application, and then reinstall it with the latest version:
    Power Manager v6.32 for W510
    If that does not work, then uninstall it again, and also uninstall the Thinkpad Power Management Driver, and other Lenovo-based power management drivers/utilities, and then reinstall them. You can do this by going to the Lenovo support pages, and heading to the Drivers & Software section.

  • "ServiceLayer Module has stopped working" in Vista

    Hi all
    My PC Suite was working just fine until recently when this error message repeatedly pops up - "ServiceLayer Module has stopped working". The only way to stop it is to terminate the PC Suite in processes on the Windows Task Manager.
    I have uninstalled PC Suite, deleted all Nokia entries and then re-installed PC Suite, with the old version I had stored on my HDD and the new version downloaded from this website, but still no success.
    Does anyone have any idea what is going wrong with my installation? Nothing else has any problems, Vista is working like a peach, but for some reason PC Suite has just given up!
    Solved!
    Go to Solution.

    Hi guis,
    I have the same problem and I have uploaded a dump file generated by the Windows Event Viever.
    You can download it at:
    http://www.uploading.com/files/7V26R6GZ/Errore-Nok​iaPCSuite.txt.html
    Please solve this problem ASAP.
    I really need PcSuite.
    Thanks a lot.
    Maurizio
    Attachments:
    Errore-NokiaPCSuite.txt ‏2 KB

  • ITunes 10.6 has stopped working on windows 7

    I just bought this Lenovo H415 desktop with windows 7 home premium.
    I installed a earlier version of iTunes and it worked fine. Then I updated it to the latest 10.6 version, and it gives me the following error after I click "agree" for the agreements whenever I start it.
    iTunes has stopped working
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    iTunes.exe
      Application Version:    10.6.0.40
      Application Timestamp:    4f56cf56
      Fault Module Name:    QuickTime.qts_unloaded
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    4cf45322
      Exception Offset:    660a1040
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\windows\system32\en-US\erofflps.txt
    I tried reinstalling it, and I also tried to uninstall it and install it in a newly created admin user account. But I am still having the same problem when starting iTunes.
    Please help. Thanks.

    Hello,
    I've been unable to use my iTunes ever since upgrading to v10.6 Today with the new roll out of v10.6.1 I ran the fresh update hoping the issue would be resolved... After the update, Same CRASH issue at opening...  I was able to FIX this on my own after messing around with an extremely confusing support article. http://support.apple.com/kb/TS1717
    Try doing this troubleshoot and see if it helps you, it worked great for me! After I moved the first folder location listed below, my iTunes was fixed! I have since deleted that folder I had moved earlier and iTunes it's still working like a charm. I've also re-wrote the instructions for you more clearly then apple did.
    Remove iTunes Preference files
    Some of the files that iTunes uses to store it's settings and preferences may be unusable and cause issues.  iTunes has two folders where it's preferences are saved. Move one of the folders to another folder location ie. (my documents, etc.) and try opening and running itunes to test.  This is to see if the issue persists after removing these files. If the issue does not persist, simply delete the moved folder and enjoy using iTunes! However, If the issue still persists, move the folder back to where it was originally and try the same process again, this time moving the second folder. The location for the two preference folders are:
    C:\Users\username\AppData\Local\Apple Computer\iTunes
    C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Really hope this helps you!

  • ITunes v11.1 has stopped working on Windows 7 Enterprise 64bit

    Hi to all. I have brand new Dell's Latitude E6540 laptop with Windows 7 Enterprise edition 64bit. I downloaded the newest iTunes v11.1 and installed (Run as Administrator) it on my new laptop. After I start iTunes in less then minute the small windows pops-up saying "iTunes has stopped working. Here is copy of error:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    iTunes.exe
      Application Version:    11.1.0.126
      Application Timestamp:    52394b24
      Fault Module Name:    KERNELBASE.dll
      Fault Module Version:    6.1.7601.18229
      Fault Module Timestamp:    51fb1116
      Exception Code:    c06d007e
      Exception Offset:    0000c41f
      OS Version:    6.1.7601.2.1.0.256.4
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    So, what is the fix for that Itunes problem? Thanks for help. vpanov

    Try copying the QTMovieWin.dll in the  c:\program files (x86)\common files\apple\apple application support folder to the c:\program files (x86)\iTunes folder. I had same problem and it's fixed this bug.

  • Itunes 10.5 has stopped working message on windows vista

    Hey Guys.
    I've just updated to iTunes 10.5, currently running vista 32bit.
    I get an error message when i try and start up itunes saying itunes has stopped working, then this...
    Problem Event Name:          APPCRASH
      Application Name:          iTunes.exe
      Application Version:          10.5.0.142
      Application Timestamp:          4e9243f2
      Fault Module Name:          CoreAudioToolbox.dll
      Fault Module Version:          7.9.7.8
      Fault Module Timestamp:          4e72cbf1
      Exception Code:          c0000005
      Exception Offset:          0023e3c2
      OS Version:          6.0.6002.2.2.0.768.3
      Locale ID:          2057
      Additional Information 1:          fd00
      Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
      Additional Information 3:          fd00
      Additional Information 4:          ea6f5fe8924aaa756324d57f87834160
    in the tab.
    Have tried install and fix, have tried uninstalling itunes and all apple software and reinstalling but no help.
    Anyone got any ideas?

    How many cds have you ripped since replacing the drive? I think you have just been lucky.
    I mostly use an external cd drive. I still have the problem with both internal and external drives.
    Remember this problem is random. I have tried 3 cds in a row and had no trouble, then on the 4th the issue is back.
    I don't believe this issue will completely go away until Apple prvides a fix with an iTunes update.

  • Error Message "iTuneshelper Module has stopped working"

    I downloaded and installed iTunes 7.3.1.3 this morning and am unable to start iTunes. Every time I try, I get the above mentioned error message.
    HP a1720n Intel Core 2   Windows Vista  

    I've just downloaded and installed the very latest drivers from AMD and installed them.  Still, I get the "clc.exe has stopped working" errors when I launch PS.  I do not get this, or any other errors, when opening or running any other programs, and have never once gotten a blue screen or had any failures in this system for the two or three years it's been running.
    While it's remotely possible that there is some error in AMD's latest (and previous) drivers for this video card, what seems to fit the symptoms I have, is that there is some problem in Adobe's code.
    Previous versions of Photoshop open and run fine on this system.  Other CAD and graphics programs run fine, too, with no crashes, lockups, or failures.
    Still, if there's something else that needs to be updated for my video system, to make the Adobe errors go away, I'm open to do whatever updates are necessary.  I'm running an AMD Radeon HD 5700 series display adapter, driver date 11/20/2014, version 14.501.1003.0.  Device manager says the device is working properly (for whatever that's worth).
    The computer is running Win 7 64 bit ultimate.  Processor is AMD Phenom II X6 1090T six-core processor.  All has been running flawlessly for several years, and continues to do so with every application except Adobe Photoshop 14.501.1003.0.

  • HELP Mail has stopped working

    On my G3 Tower, my mail account has stopped working. It says it can't communicate with the host. But, I haven't changed anything about my wireless network and my browsers are working just fine. I also have a G4 laptop and all is fine with the mail function. I've tried taking the .mail file out of the preferences file and copying it to my desktop. It gives the same error. Any ideas how to fix this??
    Thanks

    Hi Adnan,
    The Mac OS X 10.4.7 Update introduced connection issues as a result of (according to the documentation) "Mail now supports connecting to mail servers through a SOCKS proxy". If that's the problem, you must go to System Preferences > Network and disable the SOCKS Proxy in the network configuration used to connect to the Internet, if it's enabled.

  • ITunes Wifi sync has stopped working

    iTunes has stopped syncing over wifi with my iPhone 5S and iPad Mini. It's always been a bit flaky, but has recently stopped working completely. iTunes will not see the devices unless I either reboot them, or plug them in with the Thunderbolt cable, deselect and select "sync with this device over wifi" and apply. If I try to use wifi sync, iTunes gives me a "looking for device" message and then drops the connection.
    My set up is a Mac Pro running 10.10, hooked up to an Airport Express via Cat 6. Both iOS devices are on iOS 8.
    I have tried changing the IPV6 settings on both my machine and my Airport Express, resetting the network settings on both iOS devices, and flushing my machine's DNS cache.
    I see the following messages repeated in my system log:
    10/17/14 10:51:03.004 PM iTunes[2424]: Entered:_AMMuxedDeviceDisconnected, mux-device:1
    10/17/14 10:51:03.004 PM iTunes[2424]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:1
    10/17/14 10:51:03.005 PM iTunes[2424]: tid:244b - BootedOS mode device disconnected
    10/17/14 10:51:07.123 PM iTunes[2424]: Entered:_AMMuxedVersion2DeviceConnected, mux-device:2
    10/17/14 10:51:07.140 PM iTunes[2424]: tid:244b - unable to query device capabilities
    10/19/14 3:32:41.583 AM com.apple.usbmuxd[56]: HandleUSBMuxConnect Client 0x103c017d0-AppleMobileDeviceHelper/com.apple.SyncServices.AppleMobileDeviceHel per requesting attach to 0x4:62078 failed, no such device
    10/19/14 3:32:41.583 AM AppleMobileDeviceHelper[15815]: AMDeviceConnect (thread 0x7fff74ccd300): Could not connect to lockdown port (62078) on device 4 - cda9592d30dad5b13a61189fdc7d7abebcb71eca: 0xe8000084.
    10/19/14 3:32:41.660 AM AppleMobileDeviceHelper[15815]: 15815:1959580416|DeviceLinkListener.c:_copyMobileDeviceValue| ERROR: Could not connect to attached device: This device is no longer connected. (132)
    10/19/14 3:32:41.660 AM AppleMobileDeviceHelper[15815]: 15815:1959580416|DeviceLinkListener.c:_setMobileDeviceValue| ERROR: Could not connect to attached device: This device is no longer connected. (132)
    10/19/14 3:32:41.661 AM AppleMobileDeviceHelper[15815]: 15815:1959580416|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarge t| ERROR: Could not set tethered sync info ({
        SyncingOS = iPhone;
    }) in lockdown for com.apple.Bookmarks (Bookmarks): -402653052
    10/20/14 12:16:38.119 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 1
    10/20/14 12:16:38.119 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 2
    10/20/14 12:16:38.119 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 3
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 4
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 5
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 6
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 7
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 8
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 9
    10/20/14 12:26:50.255 AM iTunes[15786]: clip: empty path.
    10/20/14 12:26:50.287 AM iTunes[15786]: clip: empty path.
    10/20/14 12:26:50.334 AM iTunes[15786]: clip: empty path.
    10/20/14 9:11:27.248 AM com.apple.usbmuxd[56]: _SendAttachNotification Device b8:e8:56:cd:bb:10@fe80::bae8:56ff:fecd:bb10._apple-mobdev2._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
    10/20/14 9:11:29.048 AM iTunes[15786]: Entered:_AMMuxedDeviceDisconnected, mux-device:47
    10/20/14 9:11:29.048 AM iTunes[15786]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:47
    10/20/14 9:11:29.048 AM iTunes[15786]: tid:17e3f - Mux ID not found in mapping dictionary
    b8:e8:56:cd:bb:10 is the wifi address of my iPhone.

    Hi littlejimmym!
    I have an article here for you that will help you troubleshoot this issue:
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    http://support.apple.com/kb/ts4062
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Itunes 11.1 has stopped working error message

    I have uninstalled; reinstalled; set computer to an earlier version; copied all .dll files to itunes folder and nothing helps. I have contacted apple, but have not gotten a solution that resolves the issue. Any other suggestions out there?

    I noticed that when I opened itunes, it begins gathering information about my library and sends information to itunes match, but when I stopped that processed (pressing the small "x"), it does not stop working or freeze.  I don't know why, but it has worked for me.

  • Help function has stopped working. CS5/Windows XP

    It worked fine for a while than stopped working. When I select it the 'hour glass' appears momentarily than nothing happens. F1 key also does not respond.
    Please help me correct this as I did find it useful when needing help. Thanks for the help.

    Update/ repair your Adobe AIR install and check the options for the Community Help Client by launching it standalone.
    Mylenium

  • HT1386 How to download music from ITouch to ITunes? It has stopped working.

    When I first connected ITouch to ITunes it worked beautifully. Now it syncs the first three steps but does not add or delete music from either device. Any thoughts?
    FYI - I have downloaded latest version of ITunes. I am running Windows 2007.

    Refresh my memory as to what is step 3?
    Does it complete the sync or freeze?
    What is Windows 2007?

Maybe you are looking for