ITunes image does not appear

Hello and thank you for taking the time to view my question.
Our current LoudBlog program is dead and I am now producing my own RSS feed.
I am having trouble getting the image to appear, the URL is accurate and the xml tags are correct.
Any suggestions?
http://www.iccfamily.org/iccpodcast/ICCrss.xml

The image which is to appear in the Store page is correctly referenced in the feed and you have a suitably sized image on the server. It's quite normal for the image to take some days to appear in the Store after a new podcast has been accepted, so it's just a question of waiting.

Similar Messages

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

Image does not appear in applet.

I am reading the book, Teach Yourself Java in 21 Days.
There is an example in Ch.11 that shows how to load an image into the applet.
I have tried to use the code provided as is along with an image as defined in the code. I have also uploaded the html, class and image to a folder on the web. Unfortunately, the image does not appear in the applet. The image does have an image that I created using ms paint.
Here is the code I am currently using from the book:
import java.awt.Graphics;
import java.awt.Image;
public class LadyBug2 extends java.applet.Applet {
     Image bugimg;
     public void init() {
         bugimg = getImage(getCodeBase(),
             "ladybug.gif");
     public void paint(Graphics g) {
         int iwidth = bugimg.getWidth(this);
         int iheight = bugimg.getHeight(this);
         int xpos = 10;
         // 25 %
        g.drawImage(bugimg, xpos, 10,
            iwidth / 4, iheight / 4, this);
         // 50 %
         xpos += (iwidth / 4) + 10;
         g.drawImage(bugimg, xpos , 10,
              iwidth / 2, iheight / 2, this);
         // 100%
         xpos += (iwidth / 2) + 10;
         g.drawImage(bugimg, xpos, 10, this);
         // 150% x, 25% y
         g.drawImage(bugimg, 10, iheight + 30,
             (int)(iwidth * 1.5), iheight / 4, this);
}I tried placing the image in an images folder and I also tried changing the code to getImage(getDocumentBase(), "ladybug.gif")
as well as tried getImage(getCodeBase(), "ladybug.gif") in order to try and grab the image from the same directory as the class file and the html file.
The image file's name is: ladybug.gif
The code in the html file:
<HTML>
<HEAD>
<TITLE>Lady Bug</TITLE>
</HEAD>
<BODY>
<P>
<APPLET CODE="LadyBug2.class" WIDTH=1024 HEIGHT=500>
</APPLET>
</BODY>
</HTML>
I have gotten previous applet examples from the book to work. One of them did have an error in the author's code which I fortunately was able to overcome. This time, I am afraid, the error eludes me.
Thanks in advance.
I do see that there is no start/stop/run in this version, but I believe this should still work because of the init. I am guessing that maybe the problem lies somewhere in there.
Message was edited by:
gnikollaj

According to the javadoc:
getImage
public Image getImage(URL url,
String name)Returns an Image object that can then be painted on the screen. The url argument must specify an absolute URL. The name argument is a specifier that is relative to the url argument.
This method always returns immediately, whether or not the image exists. When this applet attempts to draw the image on the screen, the data will be loaded. The graphics primitives that draw the image will incrementally paint on the screen.
Parameters:
url - an absolute URL giving the base location of the image.
name - the location of the image, relative to the url argument.
Returns:
the image at the specified URL.
I am confused as to how to use the name after the url.
Should it read something like:
bugimg = getImage("http://g.jtrusty.com/JavaApplet/", "LadyBug.gif");
EDIT: I still get the same error, cannot find symbol at getImage.
Message was edited by:
gnikollaj

TS5181 iTunes radio does not appear in "Music" on my iPod Touch, Why?

iTunes radio does not appear in "Music" on my iPod Touch. How can I fix this?

Ok, I have resolved this issue myself. I contacted Apple support but they had no clue.
The resolution is this, bring Siri up and say "radio". Radio comes up and you touch "now playing". Believe it or not the radio icon appears and remains.
I hope that helps other folk.

SVG image does not appear in mobile version but does in desktop version

Hi,
I am new to using Muse and have created only one site before in Muse. I have taken screenshots to show the problem I am having.
I have used Illustrator to create the following logo image that I save out as an SVG file:
As you've probably guessed, I have used clipping mask to insert the marbly purple image into the shapes and text (this may be relevant to the problem, I don't know).
I then save it out as an SVG with the following details as advised by Adobe:
Then moving into Muse, I File > Place the SVG file. 'Unable to generate thumbnail' comes up in both desktop and phone versions:
Regardless, I uploaded to FTP post to my website. While the SVG appears perfectly on my desktop browser, it does not show at all on my phone browser:
This is not only happening on my phone, I have visited the same website on multiple phone devices and still the SVG image does not appear. Any ideas why this is happening?
Have I totally missed something about file formats for mobile browser versions in Muse?
Also- in illustrator, I saved the SVG logo for the mobile version as a SMALLER SVG than the one I saved for the desktop version.
Thanks

Use a PNG file. I see nothing in your logo that would warrant using anything else. You're not scaling it, there is no interaction and all you are doing is masking out some data that is pixels already. Pardon me, but using an SVG makes no sense at all. Beyond that one would need to see the file, but my guess would be that the "responsive" setting once again embeds some garbage data. Wouldn't be the first time...
Mylenium

About Help image does not appear

RoboHelp X5.2 Webhelp output
A logo created as a jpg to be used as an About Help button
will only appear when compiled on my hard drive.
I got rid of the powered by Robohelp button and created a
company image in jpg format for the About Help button.
In my project I double-clicked on the skin, and then the
About Button, selected the jpg for the About Button image, selected
a gif to use in the About Help dialog box, added company
information, company name, etc.
Part of skin code ----------------
<toolbaritem mode="Logo Mode" type="built-in-logo"
id="7">
<name>About</name>
<image>selected:napa_logo_blue.jpg?</image>
I compiled to my local drive. Everything works. The jpg logo
appears on the top right-hand side, and when you click on it, the
About Help dialog box opens with the gif image and other
information.
However, the development team compiled the help along with
the application to one of their test boxes. The jpg image does not
appear. Instead, a small white box with a red x and the words About
Help appears. When you click on this the About Help dialog box
opens with all the correct information including the gif image.
Both images reside in the skin folder on my hard drive. When
I compile the project they reside in the main folder with all the
htm files and js files.
Not sure how to resolve this.
DM

I am also having this problem. I've just converted a project
from RH X5 to RH v7. In X5 the .gif file attached to the About
button worked fine. In RH 7 nothing appears. I've tried adding the
.gif to the Baggage files but it's still broken. Any other
suggestions?

LR 4 - image does not appear in Preview and will not print`

The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference. I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem). What am I doing wrong?

The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
Date: Tue, 10 Jul 2012 16:01:47 -0600
From: [email protected]
To: [email protected]
Subject: LR 4 - image does not appear in Preview and will not print`
    Re: LR 4 - image does not appear in Preview and will not print`
    created by Brett N in Photoshop Lightroom - View the full discussion
Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT4623 person contact image does not appear while on a call,why?

person contact image does not appear while on a call,why?

when you say "Re-upload the image", do you mean reinsert it, or re-link it?
Neither.
Re-upload it to the web server from your local hard drive. In DW, click on the image file in the Files panel then click the Up arrow to Put the image to the server.
If that does not work, do as Nancy suggests and re-create the image in your image editor then re-upload.

Folio Producer Thumbnail List Thumbnail image does not appear.

Folio Producer Site > Folio Producer Editor
Thumbnail view from the list,
Thumbnail image does not appear.
Why is that?

HTML articles and InDesign articles that use JPEG or PNG image format display thumbnail images in the Folio Producer Editor. However, no thumbnails appear in articles that use the PDF image format.
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-12e05bfc12f6c86d767-7 ffe.html

Itunes icon does not appear when attepting to uninstall. Any suggestions?

When i click on iTunes is tells me I need to reinstall. (Error 7). However, itunes icon does not appear when attempting to unistall. Any suggestions?

I'm going to assume you are indeed using Windows Vista as your computer information states, and request this be moved to the Windows forum (it was posted in the iTunes for Mac forum).

After editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4

after editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4 can anyone help?

In Library, set your sort order to Filename instead of Added order and see if the files show up, then.
How are you doing the Save in PS, using Save or Save As—one will show up, one won’t, I think, but I don’t remember which.

HT201401 While calling a contact his image does not appear it appears only when he calls me

While calling a contact his image does not appear on the screen but when the same contact calls me his image appear on the screen

Hello,
I never drag the group list to mail.
I just type it's name and Mail brings it automatically.
I really don't see the point of starting do what you suggested as it complicate the work flow (using 2 applications to achieve a missing feature...)
I think the point is to simplify things and not complication them.
I need Mail to be flexible, so I can add as many groups or one by one contacts without having the need to use another application and drag from there.
How come no one has thought about that?
very strange and frustrating to know it's not existed in mail.
but thanks anyhow
by the way,
when such a feature missing, does it goes to apple features requests?
shlomit

Product Branding Image does not appear

Hi,
I created a simple OA page.
Added 'productBranding' to the 'PageLayoutRegion'.
I set the value of Image URI to FNDTAPPBRAND.gif as mentioned in the "Search" Tutorial.
When I run the page,the image does not appear.
Only the image associated with the Corporate Branding apear on the page
How can I solve it?

You need to check the profile FND : Branding Size, if it is set to Regular or Medium we render the product branding image. If it is set to small then you need to define a formatted text which will be displayed to save the space. There are other ways of setting branding, read the Branding information in the dev guide.

Itunes Library does not appear to be a valid music library

Ever since downloaded Itunes 5, deleted started again back with 4.9 I have had nothing but problems. All my tunes are stored on an external hard drive.
I have just reloaded all my music and tidied it all up nicely and then when it went to update the ipod this is the message I got :
The file iTunes Library.itl does not appear to be a valid music library file.
iTunes has attempted to recover your music library and renamed this file iTunes 4musiclibrary(damaged)1.itl
PLEASE HELP as this is really cracking me up now.

This is really old, not sure how much still applies:
Scott Patrie, "iTunes Library Does Not Appear To Be Valid" #1, 11:01pm Oct 10, 2004 CDT

Itunes library does not appear to be a valid itunes library file

i'm importing AIFF files into itunes, converting those to AAC and deleting the original AIFF files. i tried to import an album of AIFF's and received a message that i didn't have enough hard drive space to import so itunes would import as many of the files as it could. i knew i'd get to this point and would have to transfer some files onto my hard drive. however, when i clicked okay, the computer froze. i restarted manually and received the following message after attempting to open itunes "the file 'itunes library 2009-12-06' does not appear to be a valid itunes library file. itunes has created a new itunes library and renamed this file to 'itunes library (damaged)'." i'm not sure why this happened and i can't find 'itunes library (damaged)' anywhere. i have all my music still i just can't get itunes back to the way it was. please help! thanks so much.

I'll try and make this as concise as possible. Was following another thread that was "archived" without a solution. I randomly will get the error message 1450 "itunes library does not appear to be a valid itunes library - renamed library damaged." I've done everything and I'm at level 2 with phone support. The fixes we've tried seem to solve the problem momentarily but a few weeks will go by and the problem happens again. I loose all my podcasts and have to reload all music. My daughters have a different user account on the same computer and it happens to them as well. We have tried only loading itunes music files and that doesn't fix the problem either. We've reinstalled many times. I have an internal additional hard drive where I store the music but I've tried installing and saving everything on my original drive and the problem happens that way as well. I've read many threads and those of us with this problem aren't finding any answers. Please Apple or someone help with this. I'm ready to change phones and music players.

ITunes image does not appear

Similar Messages

Maybe you are looking for