ITunes Imported Songs that have no Original Files, How to delete easily?

I just reinstalled iTunes on my computer and somehow it imported about 5000 songs that I didn't know I had. The problem is when you click on these songs, they can't play because iTunes can't find th Source file.
Is there an easy way to delete all these songs or do I have to locate each one manually and delete them?
Thanks

Here ya go!
- select the Library icon in iTunes
- select all songs in the track listing
- Get Info
- change BPM to 99 (assuming you don't use that field for anything else)
- wait for that to finish - it will take a while
- after it's done, sort the display by BPM (ctrl-j & click BPM if it's not a column on your display)
All the "!" files, which will not accept the BPM change, are now grouped together for easy deletion! Take the BPM 99 out afterwards in case you need to do this again in the future.

Similar Messages

  • I have 100 plus songs in my itunes library that have lost original files but they are on my ipod can i transfer them back in to itunes library

    I have 100 plus songs in my itunes library (downloaded from store and cd's) that have lost the original file on my computer. They are still playing on my ipod. Is there a way I can transfer the songs fromn the ipod back into the library to restore the files?

    I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
    Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

  • How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is "unable to find the original file?" I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

    How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is “unable to find the original file?” I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

    Backup drive?
    Subscribe to iTunes Match?
    If neither of the above and you don't have the CD and can't find your tracks on the computer then they you're stuck.  A file recovery utility will cost $100, plus another $100 for an external drive to which to resue the files, and may not even work.  You can buy a lot of CDs for $200.

  • I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone?  Thanks!

    I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone?  Thanks!

    iTunes will only import music from your phone that was purchased from the iTunes store.  To transfer music from other sources you have to use 3rd party software, such as PhoneView.

  • Is there a way to import images that have been edited and assign them to the original?

    I am transitioning to mac and aperture. Is there a way to import images that have been edited and assign them to the original? I have 10,000 originals and about 2,000 edited images. The originals are named img_XXXX and anything modified img_XXXX_modified. I would like to be able to import the originals and then import the edited versions and assign them to the original masters. Instead of starting from here and going forward with 12,000 masters, some of which are actual originals and others not. Thanks for the help.

    Ah, the vestiges of a destructive workflow! Once you "get" Aperture, (specifically Masters and Versions) you are going to love it, as all of this work goes away - the relationship that you seek to retain is automatic in Aperture; it is simply done differently.
    The short answer to your question is EVERY image file that is Imported into Aperture will create a new Master and one Version. Assuming that your images are PSD/TIFF/JPEG that you created in something like Photoshop, then each one that your import will be a new Master. You have many options:
    -- Stick the originals in one Project(s) and the edited versions in another Project(s).
    -- Stick them all in the same Project(s) and "Stack" them.
    But here is the real question: Why are you doing all of this work and what are you trying to accomplish? Seems you are trying to preserve old things that don't need preserving in a non-destructive workflow.
    So, what is most valuable to you?
    -- The original, out of camera files? (That is, the fear/need to revert.)
    -- The edited versions? (That is the hours of work that it took you to get there.)
    If the former, import the originals and ignore the edited versions. (Either simply leave them out on disk or import them into their own Projects which you ignore.) Use Aperture to recreate the work you had done previously. This will always give you the ability to revert to the original Master and create as many Versions as you want. This is the best idea if your edits are relatively simple crops and exposure adjustments,
    If the latter, then import the edited versions and do as above with the originals. This makes more sense if your work uses lots of layers and, perhaps lots of clone tool type corrections.
    Of course, you can do a bit of both.
    Others may have better suggestions, but you will find it easy to answer your own question when you understand an image based, as opposed to a file based, non-destructive workflow.
    Good luck!

  • HT2905 Most all of my 1700 songs have been duplicated in iTunes. I have downloaded the instructions how to delete the duplicates but it says "sort by the date you added" and i have no column that says that. I am running windows xp.

    Most all of my 1700 songs have been duplicated in iTunes. I have downloaded the instructions how to delete the duplicates but it says "sort by the date you added" and i have no column that says that. I am running windows xp.

    Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • I have converted a number of songs to mp3 format on my iMac, is there a way to view just the songs that have been converted in iTunes?

    I have converted a number of songs to mp3 format on my iMac, is there a way to view just the songs that have been converted in iTunes?

    You can view tracks in a given format by selecting to show the Kind column. If you mean you want to determine which specific MP3 tracks you have that were converted by iTunes as opposed to being imported in MP3 format, Get Info on a track and look at the "encoded with" field.
    Regards.

  • HT1296 I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

    I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

    You copy them from your old computer or your backup copy of your old computer.
    The iphone is not a backup/storage device.

  • HT4914 Will iTunes match match songs that have been downloaded using a different audible account?

    Will iTunes match match songs that have been downloaded using a different audible account?

    Hey there Chriskir,
    It sounds like you would like to delete all the songs from your iPad but still be able to access them in iTunes Match. You can delete all the songs from the Music section of your Usage in Settings by swiping your music left:
    Settings > General > Usage
    iPhone, iPad, and iPod: Understanding capacity
    http://support.apple.com/kb/ht1867
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I am trying to sync music from my iTunes library on my iMac to my iPhone. I only want selected music but I'm getting unwanted songs. How can I delete those songs on my iPhone or how can I prevent these unwanted songs that have not been selected from appea

    I am trying to sync music from my iTunes library on my iMac to my iPhone. I only want selected music but I'm getting unwanted songs. How can I delete those songs on my iPhone or how can I prevent these unwanted songs that have not been selected from appearing on my iPhone? Help!

    http://support.apple.com/kb/HT1296

  • I downloaded music to my iphone and when I went to go sync it up to itunes, I lost all of the songs purchased from that time until the previous time I backed it up. How do I recover these purchased songs that have been lost?

    I downloaded music to my iphone and when I went to go sync it up to itunes, I lost all of the songs purchased from that time until the previous time I backed it up. How do I recover these purchased songs that have been lost?

    All of your music should be in itunes on your computer.
    Select it to sync and sync.

  • HT4914 If I do not resubscribe after the first year with itunes match will any songs that have been upgraded in quality lose this upgrade or will it remain?

    If I do not resubscribe after the first year with itunes match will any songs that have been upgraded in quality lose this upgrade or will it remain?

    Dottie,
    If you want to upgrade the quality of a song in your library, you have to delete the library copy and download the matched copy.
    Once it is downloaded, it will stay in your library even you don't renew Match.

  • I have downloaded an album through itunes and there are 4 songs that have a cloud with a red arrow pointing downwards, when I click on it it says unable to download at this time.  Why is this?

    i have purchased an album via itunes and there are 4 songs that have a cloud with an red arrow pointing down, when I click on it it says unable to download at this time.   Why?

    I'm not sure if they could tell you but you could try contacting Apple for assistance by going to https://expresslane.apple.com, then click iTunes>iTunes Store>Purchases, Billing & Redemption.  You will need your serial number, which you can find in Settings>General>About.

  • TS4124 I have a problem that when I sync my ipod with I tunes it only syncs the songs that have been downloaded from the cloud.

    I have 9000 songs in the cloud and have not downloaded all of them
    My ipod does not sync the songs that have not been downloaded.
    Do i have to download all the playlists individually?
    Help

    Here's how iTunes works.  You add a file to iTunes. iTunes makes a note of where that file is located, gets information from it about artist, etc, and writes the information to its library file.  iTunes doesn't look at that file again until you play it.  It knows where to find it when it needs it.  However, sometimes things happen so the file is no longer where iTunes expects it to be.  In many cases this is because the user has renamed  a file or folder in the file's pathway, or moved the file.  In extreme cases it can happen because a hard drive is dying.
    When iTunes invites you to find the file, it is asking you to do exactly that.  If you renamed the file you need to remember what you called it and where you put it and point to it to rebuild the link.  Sometimes if people move all their files to  different drive you need to point to one and iTunes may be able to find others given that information and assumptions as to where the others should be located relative to that.
    It is also possible files have gone missing.  In that case you need to restore them from their original source  or a backup you make regularly of your computer knowing that some day it is 100% guaranteed your drive will fail and you will be very happy you have a copy of everything on another drive.

  • Can't play songs that have a "old" account name?

    i have a number of songs that have different account names.... some have my user name and then some have my user name plus "@.mac.com" at the end of the name... the ones without the @mac.com will not play? any ideas?

    I'd suggest you start a new topic with your issue (use the "Post a new topic" link at the top of each main topic page). It's generally better to ask a question as a new topic rather than as a reply in someone else's thread. It's more courteous to the original poster, and is more likely to get your question the attention it deserves.
    Meanwhile, this may help:
    http://www.apple.com/support/itunes/store/authorization/
    Regards.
    Message was edited by: Dave Sawyer

Maybe you are looking for

  • Remote access VPN-unable to connect inside-URGENT

    Hi, I have configured Remote access VPN in cisco ASA 5520.Whenever I am trying to connect from outside it's connecting fine.It aslo getting IP from pool but prob is i am unable to connect/ping inside nw. Pls help me...how to resolve this issue.

  • Error in importing the tables from database

    HI , while importing the table from the metada by using OCI call 10g/11g i am getting the below exception: *"Some objects are not imported because of invalid names : (DESCRIPTION =(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SERV

  • Error when running consolidation

    Hi, I am running a legal consolidation with this script logic: *RUN_PROGRAM CURR_CONVERSION       CATEGORY = %CATEGORY_SET%        GROUP = %CONSOLVIEW_SET%        TID_RA = %TIME_SET%       RATEENTITY = GLOBAL *ENDRUN_PROGRAM *RUN_PROGRAM CONSOLIDATIO

  • How to do From Month to Month

    Hi, I am using Discoverer 4.1. I have column in a table called Dt. After i view in Discoverer, i can see Dt Month, Dt Quarter etc came automatically. Now my problem: I want user to select From Month To Month in Discoverer( Eg: Jan to April) or From D

  • MBVR reservation deletion raising error message

    Hi, When we run the MBVR T-Code for deleting the reservations, it's throwing an error "A system error has occured while locking data". The error message number is M7 110. Could you please help me in understanding why this error occurs. The lock mode