Itunes install 11.1 however after the update the same update shows up again.

Anyone seeing this?
I have updated the Itune via APP store and Download however the app app keeps showing it as a update needing updated.
I have a bit of a wierd setup but this should not be affecting the app manager I hope.
I have linked my /Applications dir to the SSD HD.
Again, The Itune 11.1.1 works and runs and does all i need it to. However the app store keeps saying the update is not installed and it is.
Again, Anyone else seen this and have a fix?

Hey hernar00!
It sounds like you are having an issue with Home Sharing. Here is an article that will help you troubleshoot this issue:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Similar Messages

When creating a new event it tells me "attendees can not be changed" I didn't try to change attendees I was simply inviting one. What's happening? I did a reboot but the same message showed up again

I am trying to invite one person to an event. I click the plus sign create the event and add my one attendee. However, when I go to complete it the attendee is no where to be found and I get a pop up box that's says "attendee can not be changed". I didn't change the attendee. The names was pulled from the address book with no problem. I do notice when I go to change my calendar that the attendee line seems to disappear. Help? I am using iCloud with Mac book Pro, ipad2 and iPhone.

Connect to iTune and "Check for Update" (tap to enalrge image)

TS3212 Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, please hel

Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly I got the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, that stated: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program fo fix. then I got the message, iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) I have had iTunes since I purchased the iphone in 2012. I have only updated the product since then until today when I did the uninstall ans reinstall as stated in above directions. I am not sure what is different now. please help

I had this problem as well but found the soultion on another post from turingtest2 - it worked for me:
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selectingRun as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

After update iTunes to the version 11.2.2(3) on MacBook Pro I cannot connect any apple device. iTunes is "hanging". do U have the same problems?

after updat iTunes to the 11.2.2(3) ver I cannot connect any device iTunes after connect device (iPad3, IP5S) is hanging.. and I have to force iTunes to close. do U have the same problems?

Hey there Michal115,
It sounds like you are unable to connect your iOS devices without it becoming unresponsive. That would frustrate me too. I would use the following article about that very issue to help you resolve that:
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/ts3219
Start with these 3 steps to make sure the other devices are up to date as well, and there is additional troubleshooting to be done in the article if needed:
Install any available software updates for your computer.
For Mac OS X: Click the Apple () menu, choose Software Update, and follow the on-screen instructions.
For Windows: Refer to the documentation for your computer for instructions on using Windows Update to update your computer.
Update iTunes to the latest version.
For Mac OS X: Click the Apple () menu, choose Software Update, and follow the on-screen instructions. You can also download iTunes from the Apple website.
For Windows: Use Apple Software Update, or download iTunes from the Apple website.
Test with automatic syncing disabled.
For Mac OS X: Click the iTunes menu and choose Preferences. Click the Devices tab and place a check next to option to "Prevent iPods, iPhones and iPads from syncing automatically." Click OK.
For Windows: Click the Edit menu and choose Preferences. Click the Devices tab and place a check next to option to "Prevent iPods, iPhones and iPads from syncing automatically." Click OK.
Reconnect your device and test to see if the issue still occurs. If your device is recognized successfully, you may be able to isolate which type of data is causing the issue. Do this by deselecting all syncing options under each of the syncing tabs and then sync. After that, re-enable your sync options one at a time until the issue returns.
Note: If the issue only occurs when syncing data from the Info tab is enabled (For example: Contact, Calendar, Mail account or Bookmark syncing), reset the Sync History (for Mac OS X instructions see this article, for Windows see this article).
Thank you for using Apple Support Communities.
All the very best,
Sterling

HT4623 iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

Error 3014
This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.

ITunes / iPhone not working properly after newest update...

iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Itunes just won't start after the upgrade

I've upgraded my itunes, and done all the double checks I've found on this site. My itunes just will not start after the upgrade. It's frustrating to say the least because I can't even access my libary or edit my ipod. I've tried everything including uninstalling and reinstalling.. please help! I wanted to put my audio books on my ipod for a roadtrip tomorrow!

Thanks Katrina. I was able to find what I needed through the link that you provided.
To those that are having this problem, here's what I did to fix this issue:
+If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
+1. Open AirPort Utility.+
+2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
+3. Select the specific firmware version you require.+
+4. Click Download.+
+5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
+6. Choose Base Station > Upload Firmware.+
+7. Select a firmware version and click OK.+
+An important note about installing firmware+
+After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
http://support.apple.com/kb/HT1218
I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

Hi, i need help, okay..my issues is that since the lastest update for the ipod touch, my music lihow can i get the itunes main music playlist to appear the same on my ipod touch?

Hi, i need help, okay..my issue is that since the lastest update for the ipod touch, my music list is all over the place....my question is how can i get the itunes main music playlist to appear the same on my ipod touch?

Hi Lawrence,
Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´ Those were good days..... What a City

Every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this?

every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.

Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!

I have a laptop PC and am trying to install my product. After the download is complete I get an error that says "the file archive part of Adobe Photoshop Elements 13 is missing. You need all parts.

I have a laptop PC and am trying to install my product. After the download is complete I get an error that says "the file archive part of Adobe Photoshop Elements 13 is missing. You need all parts.
Please help, I don't know how to do this
Thanks

you need both the exe (which you have) and the matching 7z (that you don't have, yet). dl it:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HT4946 by mistake my contacts are deleted from iphone and the pc which itunes installed is corrupted, i have the itunes backup folder,is this possible to restore the contacts from my old itunes backup folder to iphone!?

by mistake my contacts are deleted from iphone and the pc which itunes installed is corrupted, i have the itunes backup folder,is this possible to restore the contacts from my old itunes backup folder to iphone!?

unless you had them synced with icloud or some other email account, very unlikely

Cannot connect to iTune store... even after the internet connection is working fine... plz help...

cannot connect to iTune store... even after the internet connection is working fine... plz help...

Same here, also cannot access the App Store. Internet connection is good. Iam on a Mac

Last summer I bought a music album from iTunes. I've already transferred all my orders from my units, but somehow iTunes wants me to pay for the same album again. When I try to add it to my wish list it simply tells me that I've already bought that item.

Last summer I bought a music album from iTunes. I've already transferred all my purchases from my units, but somehow iTunes wants me to pay for the same album again. When I try to add it to my wish list it simply tells me that I've already bought that item.
And I've already tried to search for downloadable purchases.
So fact is established, I've purchased this album before but iTunes does not recognize it.
What to do?

Hey sorry for the late response but I've been out of town. I can copy and paste the email responses if necessary or desired, and if it's fixed already this is a moot point anyway, but basically they kept asking me for the order numbers for the two songs I already bought from the specific album I was trying to complete, which I eventually gave them - along with telling them multiple times that the Complete My Album feature wasn't working for ANY album. They gave me two free song codes to compensate me for the two songs I bought, and then told me to go and buy the album at full price, but the ENTIRE TIME they COMPLETELY ignored that I was telling them that this wasn't an issue with one album but was a larger, seemingly systematic issue that other people were experiencing. Even after I got the song codes I emailed them back and said AGAIN that this wasn't an isolated feature, and they just sent me the link to the apple Feedback page (http://www.apple.com/feedback/itunesapp.html) and told me to submit my complaint there. So, technically, my issue was never really "resolved," in that they never fixed the Complete My Album feature that I am aware of - or even acknowledged that anything needed fixing, but I haven't tested it since Sunday.
If it's working for you, then hopefully they fixed it! I've noticed they've updated to 10.4.1, but the notes don't indicate they're fixing anything about the Complete My Album feature, so I don't know.

HT201263 ok, I did the above, and I waited 2 hours for this to download the "update." Then I try it again on the ipod, and it starts to redo the same download all over again !

I started the update, and in the middle of it, the same previous screen pops up that it can't connect to the ipod,and the ipod screen goes back to "disabled." I waited it out, let the download finish. Then I had to try the process over again, and it started the download all over again, even though I just did that. Another two hours??? This is driving me mad. All for a stupid password ! How do I reset this dang thing, so I can open it. Bad enough I have to re do everything, because I have to restore it. PLEASE HELP !
Just wanted to add that apparently the ipod is disconnecting and reconnecting to the computer somehow. I know because when you plug in the ipod, the computer makes a noise, as with any hardware. Well I click on "restore," agree to the restore, then it starts to download the update. A few minutes later, I hear the computer make the same noise, as if I have disconnected the ipod, even though I haven't even touched the cord. Then it makes the sound again, as being reconnected or plugged in, then the message pops up that it can't be connected, because a password has to be entered. The ipod screen then goes from the restore picture ( the itunes logo with usb cord) to the same "disabled, connect to itunes."
I am not trying a different cord and seeing if that helps the plugged in portion.

Do a manual install using the instructions here.
have you download the update/firmware, place the iPod in recovery mode and then update/restore using the instructions in the article.
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Itunes install 11.1 however after the update the same update shows up again.

Similar Messages

Maybe you are looking for