Itunes installation file wont run

I have successfully downloaded itunes801Setup.exe. When I run it it gives the usual XP warning stating publisher not verified. When I click run nothing happens. I have also downloaded the quicktime installer file with identical results.
Everything else in running fine on the PC which is Windows XP fully updated.

Im not having the exact same problem, but since downloading itunes 7.7, itunes wont recognize my ipod when I connect it.
Its not the connection to the computer thats not working because the ipod icon appears in My Computer. And my ipod is working fine, its just itunes that wont recognize it...but like I say its only been acting up since yesterday afternoon when I downloaded 7.7....
....help??

Similar Messages

Missing the itunes installation file

i am missing the itunes installation file and thus can't uninstall old version or install new version - can someone help? thanks in advance

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Where can I download a full iTunes installation file?

I need to install iTunes on a Windows 7 computer where the iTunes site is blocked. This means running the usual setup.exe won't work because that then tries to download the rest of the iTunes installation files - and that's not going to happen.
A few years ago, I managed to find a full installation file (80-90MB) and did this successfully - but can't seem to find one now.
Anyone know a link where the full installation file is available ?
regards
Ian

See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links.
tt2

Every time I download the itunes installation file, it get deleted because it has got a virus... I've turned Norton 360 completely off, but still get the same error???

Every time I download the itunes installation file, it get deleted because it has got a virus... I've turned Norton 360 completely off, but still get the same error???

Hello wilsona1234,
Sorry for the trouble. What is the exact detection from Norton for the installation file? Did you download itunes from the legitimate Apple web site? What is the error you are referring to?
Thanks,
Harry
Norton Support

HT1926 Why can't I download the itunes installer file to my iPhone?

It is required to run on my PC inorder to use my iPhone as an internet connection!!! *** Apple spend hundreds on the latest greatest brick and it still ***** very unhappy 5s (s is apparently for SUCKER) owner.
I use my phone as a hotspot and I recently had to restore my windows computer, thus deleting the itunes program and installer... Sooooo I figure no big deal the iPhone shows up in windows 8 with a drive labeled "internal storage" why can I not simply download the windows installer file to that folder on my iPhone and run it on my PC ( much like a very over priced thumb drive) but no sir apple prohibits it's iPhone from downloading .exe files to anywhere on itself through safari ***???? Yes I can go to any public library and download it to a thumb drive in the morning but what to do all night???? ..... I got it vent about the infinite ways the control misers at Apple find to make the simplest of tasks next to impossible... Will once again be an android user in the bear future.... Expense is justified in defense if common sense... So to you apple I give -1 of 5 stars for overbearing control freak power hungry activities!!!!

It's a phone, not a thumb drive. If you want to download an .exe file to a thumb drive, then buy one. We are not Apple here - we are just users like you, and this is a user to user technical help forum. So, if you have a technical question please ask it.
Otherwise, you are wasting your breath.
Cheers,
GB

Itunes installer won't run in Windows 7

I am trying to install the latest version of itunes on my new laptop and the installer won't run. It is a samsung sereis 7 notebook running Windows 7.
I have downloaded itunes multiple times and tried running as administrator. I do not get any error, and occasionally a progress bar will flash up on screen for a couple of seconds but then nothing happens. Other times I don't even get the progress bar, just nothing happens when I try to open the installer.
Would appreciate any help with this problem. Its driving me crazy not being able to add new music to my ipod!

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Please Help - iTunes installer won't run on double-click

I am facing a reload of Win 7 x64 tonight if I don't get this fixed. When I run the installer all it does is create a temp folder and put an .msi in there. Nothing else happens. No errors or messages, no hung processes. nothing.
I've completely uninstalled itunes and every apple product. I've tried QuickTime independently and it does the same thing. The Windows installer is clean with no Apple entries. I initially got the message "itunes + QuickTime have an invalid signature" when trying to upgrade from 9.1 to 9.2 which prompted me to completely remove everything. My iPhone4 is coming Thursday so I've got to get this working!!
thanks all.

I had this same problem. I followed the instructions on how to use MSCONFIG listed here: http://support.apple.com/kb/HT1275
In my case, iTunes & Quicktime were already uninstalled, so I just skipped the step about checking "qtask" & "iTunes Helper."
I used MSCONFIG to re-boot in selective start up mode. Then, I fully shutdown Virus protection. The iTunes installer ran after doing this.

Batch/Powershell file wont run via Task Scheduler

Hello,
I'm having trouble getting my Powershell file to run from Task Schedule during logoff. In short, I'm trying to upload my NTUSER.DAT (roaming profile) to my profiles folder on the file server. Dynamic VLAN switching does not support roaming profiles thus
I have to use a script to solve this issue.
My powershell script is as follows:
start-sleep -s 15
Set-Content -Path "C:\Temp\log.txt" -Value "Hello World"
$FileServer = 10.10.5.5
$FQDN = "$Env:UserDomain"
$User = Get-WmiObject -Class Win32_NetworkLoginProfile | Sort-Object -Property LastLogon -Descending | Select-Object -Property * -First 1 | Where-Object {$_.LastLogon -match "(\d{14})"} | Foreach-Object { New-Object PSObject -Property @{ Name=$_.Name.TrimStart("$FQDN\") }} | Select -ExpandProperty Name
copy-item -path C:\Users\$User\NTUSER.DAT -destination \\$FileServer\Profiles$\$user.V2\ -force
copy-item -path C:\Users\$User\NTUSER.DAT -destination \\$FileServer\Profiles$\$user.V3\ -force
I have a task schedule to run as Domain Admin when event ID 4647 occurs (logoff). It is set to run with the Highest Privileges checked, also I have enabled to run weather the user is logged in or no. The Domain Admin account also has access to ever file,
both at source and destination. Set-ExecutionPolicy is set to unrestricted. The way I call the powershell script in Task Scheduler is:
Action: Start a program
Program/Script: C:\temp\launch.bat
The launch.bat contains the following:
Powershell.exe -executionpolicy unrestricted -File "CALL C:\temp\powershell.ps1"
The task is triggered each time when the user logs off, I have confirmed this in the logs. But the NTUSER.DAT file fails to copy over to the network, in fact the log.txt file isn't even generated. I have confirmed my code to work, it's just the task scheduler
part calling the code where I think it fails.
Can you guys point me in the right direction here? I know I'm close, but not sure what I'm missing.

Jrv,
Yes in my testing the task schedule is unreliable, I don't have any info on how long the profile is locked, thus I can't copy the profile to the server when the OS still has it locked.
What do you propose I change my vlan configuration to?
Thanks.
What you are trying to do cannot be done. That is why it is not being done. If you set up roaming profiles and redirected folders this would happen automatically. It would also happen very quickly. THat is because Windows posts cahnges
to teh roamed image as they happen. Only changes are copied. Items in teh registry which are only valid during logon (Dynamic Entries) are nver copied so updates that are not needed are not posted. It is these updates thaat can keep the registry
locked for a very long time.
If you scan your network you will likely find hives thaat are loaded with no one logged in. WIndows 7 and later have a utility that forces and unload after a few minutes. It posts the reson for the forced unload to the event log.
As for the VLAN it is likely not configured correctly. THe profile must be on a server that is available on the same net ID as the PC. YOu may also have to allow the switch to suspend if you are using per-user conenctions. Contact the VLAN
vendor and tell them about issues with Roamed profiles. THey will walk you through the setup. THe most common issue is thaat the switch specifies 1Gb and the server is set to 100Mb and the switch is not set to match the speed. THisis a simplpe
configuration error done by a tech who does not have much experience with VLANs. THey tend to think that setting everything to 1Gb or some other maximum will work but it won't. It can also be caused by a files server with a 1Gb card that is a pront
spooler spooling to a 100 or 10Mb older printer. This disrupts the card and the VLAN cannot attach to it until the spooler is dona nd the card can switch. It can also be caused by a bad card or a bad switch.
Then VLAN vendors techs are usually very good at troubleshooting this kind of issue. Remote VLAN logging and diagnostics can also pick out the issue.
¯\_(ツ)_/¯

Itunes64.exe (itunes 10.3) - file wont run on my laptop!

i have just got my new i7 laptop and saved itunes to my downloads and when i run as administrator it does nothing? please help!

You should check if your Operating System is 64-bit. If not you should try installing 32-bit version of iTunes.
Right-Click on your "Computer" icon.
Select "Properties"
Under "System" preferences you can see "System Type".

Itunes 8.1 wont run in vista- data exectution prevention stops itunes has c

itunes wont even run since i downloaded 8.1, i keep getting the message "itunes has stopped working", and "data execution prevention has closed itunes" how the **** do i get back to the previous version of itunes so i can use my ipod again??

I just got off the phone with support. You will need to provide your nano or iPod serial number to get any help with a windows system ( which I have ). I indicated that I followed the entire path to get a good 8.1 install. That included a windows "remove" of the current stable install ( a mistake ). I will have to drive 1 hour to an apple store and show up with a blank CD to get a good copy of the 8.1 "exe" install file .
bassclef08

Corrupt iTunes installation - file MSVCR80.dll needs to be reinstalled.

Where do I find the file MSVCR80.dd to reintall - apparently caused by corrupt iTunes?? Thanks.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99780)

Itunes exe file wont install

Hi,
Two days ago I formatted my pc (Windows 7 Professional 32bit) & have been going through the process of downloading & installing various programmes online. I've installed half a dozen or so & have got to iTunes. Visited apple.com to download the latest version, but everytime I double click, or 'run as adminastrator, nothing happens..?
Restarted PC, turned off firewall & done Windows update, numerous times now & still nothing.
I finally had the bright idea of downloading Quicktimeinstaller, which was no problem, this then presented me with the option to download iTunes. This I did but the file gets half way through the download & I get "iTunes has an invalid signature. It will not be installed"
I'm pulling my hair out now, can anyone help? I have no previous iTunes installed as hard drive was wiped & every other program I've downloaded has istalled 1st time.
Many thanks

OK after hours of my time & a significant loss of hair, I've managed to download it...!!!!
All I did was went to:
http://http://www.dkszone.net/itunes-10-1-download-supports-ios-4-2-airplay
and downloaded iTunes 10.1 (older version) this came down as the normal setup.exe file and installed to my PC, as soon as you open and run this version of iTunes it will inform you of an updated version 10.6. Just hit the install and go...
IT WAS THAT SIMPLE
I hope this will help others NOT to waste precious time, as I did..!

Itunes 7.7 wont run

I bought a new iPod and had to download 7.7 for the new iPod. after doing that
following instructions etc I can't get iTunes to open from the desktop short cut/all programs short cut. I've tried to repair I've removed and re-installed
I got iTunes to open once but again it wont open, it soooo frustraing any ideas?pleeeeease

Im not having the exact same problem, but since downloading itunes 7.7, itunes wont recognize my ipod when I connect it.
Its not the connection to the computer thats not working because the ipod icon appears in My Computer. And my ipod is working fine, its just itunes that wont recognize it...but like I say its only been acting up since yesterday afternoon when I downloaded 7.7....
....help??

Updated to iTunes 7 now wont run

i've just updated to iTunes 7 but now it won't load and an error message appears saying "iTunes cannot run because it has detected a problem with your audio configuration." Yet my audio configuration has not changed?

I'm having the same problem. I tried repairing, reinstalling and even going back to my previous version, but that was now buggy too. So I've re-reinstalled the latest version and am looking for a fix.
ETA: Stop the presses! This seems to have solved the problem!
http://docs.info.apple.com/article.html?artnum=304424

Itunes installs but wont load up

I have installed itunes 9.0.2 64 bit on windows 7 64 bit computer. It wont load at all. itunes.exe*32 starts up in the task manager applications then quickly disappears and nothing more happens. I have tried downloading again, and removing all apple applications and registry refs then reinstalling but that doesnt work either. I have tried turning off virus programs, checking computer for malware and spyware.
I dont know what to do next. I just cant get it to load. It worked prior to the itunes 9 upgrade. but now i cant go back as I have uninstalled everything.
I was dreaming of an iphone - I guess that is out of the question if I cant get the software to work at all

I do use norton 360 so maybe some vodoo there?
Possibly, although I tend to associate a Norton-related (generally speaking, "firewall-related") error-message-free iTunes launch failure with an iTunes.exe appearing in process manager and never going away (rather than the quick flash of an iTunes.exe that you're seeing).
Could you check something for me, please? Try to launch your QuickTime Player. Does it launch properly, or do you get odd things happening when you try to launch that too? If odd things happen, could you describe them for us?

Itunes installation file wont run

Similar Messages

Maybe you are looking for