Itunes Installation Problems!! Please help!!!

I recently bought an Ipod Nano, but it is not registering on my Itunes. I have tried to dowload Itunes 7 but everytime I do, it says there is an error with "Stopping Services." I have no idea what this means, or how to correct it. Can anybody please help me?

Version 7.0.2.16
okay. with that message on earlier versions (itunes 7.0.0.70 and 7.0.1.8), some folks had some success with pgfpdwife's technique in the following post:
pgfpdwife: Re: Could not open key HKEYLOCALMACHINE\Software\Classic\Quicktime.Quicktime\
note carefully that the technique involves a registry edit. be sure to make a backup of any keys you edit. if you're unfamiliar with your registry or registry editing, head to your XP help and support, do a search on registry, and read through the articles that come up.
There are also some instructions on how to back up registry keys in the following document:
Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows
is that of any help with your 7.0.2.16 version of this?

Similar Messages

Itunes Video Problems Please Help

All of my videos imported onto itunes, except for one I just recently download. It is the same mpeg4 format as all the others, and there is no reason I can think of that it will not import. Can anyone please help me?, as I would really like to have this file on my ipod.
Thank you very much!
30 gb video Windows XP

Your video you purchased from ITunes plays correctly because it was properly produced to work on the IPOD. As to your other questions:
"the latest being the superipod convertoror something like that."
If you don't know then I don't know.
For issues concerning "Videora" you can search their web site for answers to your specific problems:
Videora Forum - http://www.pspvideo9.com/forums/index.php?c=8

Installation problem-PLEASE HELP!

I downloaded a trial version of Dreamweaver CS3 from Adobe.
Later, I purchased the whole Suite and when installing the
installer keeps telling me that Dreamweaver CS3 is already
installed. BUT IT'S NOT!? I deleted all the files (I think) prior
to installation of the Suite. What am I missing? Please
HELP!

tomzbruz wrote:
> I downloaded a trial version of Dreamweaver CS3 from
Adobe. Later, I purchased
> the whole Suite and when installing the installer keeps
telling me that
> Dreamweaver CS3 is already installed. BUT IT'S NOT!? I
deleted all the files (I
> think) prior to installation of the Suite. What am I
missing? Please HELP!
The installer has a mind of its own. You will almost
certainly need to
run the cs3clean script to remove all traces of the
Dreamweaver trial
version. Unfortunately, this will also remove the rest of the
suite, but
once your machine has been cleaned, the suite should install
correctly.
http://www.adobe.com/go/kb401574
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

CS3 Installation Problem, please help!

Hi there ive been trying to install Photoshop CS3 and having great difficulty, it will only install the shared components and nothing else, Ive gone through all the tutorials on the Adobe help pages and still not had any luck, I've tried looking through the log and the only thing I could come across is the following:
[ 5028] Sat Apr 11 00:41:19 2009 ERROR
Default installation language not valid, falling back to first supported language.
[ 5028] Sat Apr 11 00:41:19 2009 DEBUG
couldn't find any info on the error code or anything, ive uploaded my installation log here:
http://www.2shared.com/file/5313464/86af2f33/Adobe_Photoshop_CS3_10.html
please help! I am using windows Vista but not sure if its 32 or 64

just tried that and still does not want to work, really just does not want to install for some reason!
I did try this and it wouldnt let me allow inhertible permissions to the admin on Solution 11 of this: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401401 this part here:
Select both "Allow inheritable permissions from parent to propagate to this object" and "Reset permissions on all child objects and enable propagation of inheritable permissions," on the Permissions tab.
Click OK in the "Advanced Security Settings" dialog box. Windows will now reset the permissions for each child object to correspond with its parent.
If you can't change permissions or rename that key, then contact Microsoft or your hardware vendor for assistance.
not sure if that has something to do with it?
appart from that i'm completly out of ideas, very frustrating as i have been trying for days to get this to install! any more suggestions are welcome

SAP EP 6.0 Installation Problems -- Please Help

Hi,
I am new to the SAP EP Technology (any SAP for that matter) - I figured out that downloading the EP Sneak Preview would be a good idea to learn it.
So I downloaded the WAS (Java 6.4) and installed it without any problems. The JRE is working fine and registered.
I then tried to install the EP 6 Sneak Preview itself and that's when I was made to stop by this error.
"SAPInst could not find any SAP J2EE instances that match the Portal Platform requirements. Install the SAP J2EE 6.40 according to the Portal PAM requirements, and run the portal installation again."
I have tried quite a few things but nothing seems to work. Anyone who had this problem and gotten out of it...please pass on your knowledge.
Thanks...

Hi Balaji,
I have not encountered this problem so perhaps you could provide some more details.
After the installation of the WAS6.40 how are you sure that it is operational? In the MMC that is installed is the server showing up green in the console? What parameters are you providing the to the Portal installation?
Are you using the Sneak preview installation guide as reference?
Regards
Daniel

Oracle BI SE One Installation problem - Please help

Hi,
I am trying to install Oracle BISE1 on a virtual machine having a Win Server 2003 (32 bit) OS. In the last step...I got stuck with the installation of Configuration Assistant and the error which I got was:
Command = C:\oracle\bise1\db\install\bise1config.bat has failed
Execution Error : BISE1 Configuration Assistant failed
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:345)
     at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:428)
     at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:515)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:345)
     at java.sql.DriverManager.getConnection(DriverManager.java:512)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at oracle.as.config.bise1.util.DBUtils.getConnection(DBUtils.java:18)
     at oracle.as.config.bise1.action.UnlockAccounts.execute(UnlockAccounts.java:35)
     at oracle.as.config.bise1.BISE1ConfigAssistant.main(BISE1ConfigAssistant.java:76)
Then in one of the similar previous post I read that this problem could be solved by giving administrative privileges to the file "E:\oracle\bise1b\db\install\bise1config.bat"
[Previous Post for the same problem - http://forums.oracle.com/forums/thread.jspa?threadID=955418&tstart=60 ]
I did that and hit the retry button. But this time I am getting a different error as follows :-
The Oracle system identifier(SID) "bise1db" already exists.
Specify another SID
I guess this is my 4-5 attempt in the last one month. I have been unsuccessful in all my attempts so far. Kindly help at the earliest.
Thanks.
Edited by: user8918282 on Apr 22, 2010 3:14 PM

This behaviour is due to known bug in patch detection algorithm which has been fixed in MU1 release.
You have two options: you can either download S1AS7 MU1 release which contains fix for this problem or you can use following workaround: temporarily rename /usr/bin/showrev file and start installation. Installer will report that it cannot detect patch level of the system, but it will let you proceed with installation. Once installation is done, revert showrev file to the original name.
Thank you.

Windows 8 installation problem, please help..

I tried to install windows 8 (legal) on my 5/2012 Macbook Air using Bootcamp. Everything was ok since I entered the disc-choosing part. On "bootcamp partition" the installation program says "unable to install windows to this partition because of missing drivers, try to enter Bios". When I restart the computer, only the Windows logo is able to be seen and thats all, now it´s impossible to even enter the Windows installation programme. But, when I disconnect my flash disc containing W8, Mac is still booting W8 installation saying "No bootable media found". Is there any possibilty to enter my MacOS, system choice, or at least to download new MacOS and format the disc?
Thank you so much....

@filisipi: I am not sure if I understood your problem correct. Holding down the "Alt"-Key after turning on the power of your MBA should give you the joice between all operating systems recognized at this point in time. This should provide the way to boot again with Mac OS.

Adobe After Effects CS4 trial installation problem, Please Help!

Ok, I downloaded the trail version of Adobe After Effects CS4 onto my PC (Windows XP). When I try to run the setup (by double-clicking it), a window pops up saying 'Adobe setup has encountered a problem and needs to close.' Does anyone know why this is, and how I might be able to fix it? I already tried re-downloading it, and I checked the system requirements. I WOULD REALLY APPRECIATE ANY HELP YOU CAN GIVE ME BECAUSE I REALLY WANT TO USE THIS! If it will help here are my PC's specs:
Operating System - Windows XP with service pack 3
RAM - 2.0GB
Graphics Card - ATI Radeon HD 4830
Processor - Intel Core 2 Dual 2.2GHz
Monitor Resolution - 1280x1024
Thanks

Verify the following:
a) you run as administrator
b) your virus scanner and firewall don't interfere
c) you have enough temporary disk space
d) no other tools are interfering
For b), simply turn those tools off during install. For c), check your user temp directory (C:\Documents and Settings\You\Local Settings\Temp). Clean it out either manually or using tools like CCleaner. Also defragment your drive. For d), you may need to uninstall otehr Adobe software. also monitor your task manager for processes and services that may have a negative impact. A dump of those can easily be generated using HijackThis!, so you can post the list here for verification, if needed. also provide any otehr info that could be important, like e.g. special drivers or user settings.
Mylenium

ITunes connection problem, please help

Dear Apple-forum members,
Yesterday I tried to sync my iPhone 4 with iTunes (Windows 7 64-bit). When it was at step 3, Windows gave me the message that iTunes did not respond, and shuts it down. While this happened, my iPhone was still in the sync mode but didn't do anything, so I cancelled it.
When I tried to sync again, I got error 0xe8000065. After a restart, iTunes doesn't even know that the iPhones was connected, although my phone WAS showed inside 'My Computer' (so my computer DOES recognise my iPhone).
I deleted the adapter, and reinstalled it again. Same issue.
I connected my iPhone with another computer, and reconnected it with my own computer. Now I get another error 0xe8000001.
I deleted and reinstalled iTunes, set iTunes as 'administrator', but also the same issue.
Anyone having the same problem.
How can I solve this?
I use:
Latest iTunes version 64-bits
Windows 7 64-bits
iPhone 4 iOS 4.3 (not jailbreaked)

You need to place the iPod in recovery mode and then connect it to your new computer and restore it via iTunes. Note that you will lose all content on the iPod. You can redownload apps at no additional cost provided you are signed into the same iTunes account that originally purchased the apps.

Installation problem, please help, urgent needs,

I have install the FCP 7 into my MBP, and updated, but in the "add behavior" tap i don't have those new behavior like "text-basic" "text-continuous" "text-energetic" etc..... how can i add it back?
urgent needs, please help

fixed

Hard drive installation problem, please help

I installed a new hard drive and get a prompt:
"No bootable device -- insert boot disk and press any key"
I then insert the Mac OS install disk 1 and press a key and nothing happens -- it stays at the above prompt. What do I need to do?

Try holding the "c" key while booting with the Mac OSX disc already in... I believe that's the key to boot from CD. Maybe it's changed but worth a try.

Cant download itunes, because ' there is an error with windows installer package' please help?

cant download itunes, because ' there is an error with windows installer package' please help?

I am getting the same message when I try to install the latest version of iTunes, I am running on Windows Vista Home Premium. I have tried so many different things to try to correct this and have now completly unistalled it from my laptop..... Now I have no iTunes what-so-ever on it and still can't install it. I found an older versin of iTunes and it installed without any problems, but I can't access it because my library was created on a newer version! Talk about frustrated..... WE NEED HELP!!!!!

My iPhone 3gs after update thane sim are damage and iTunes show locked, please help me, how can solve this problem? i am purchase from Sweden.

My iphone purchages from sweden, when my ipone update latest vertion then sim cards damage and iphone monitor show itunes are loced. please help, how to solved the problem.

Swedish carriers sell their phones carrier locked and do not offer official unlocking. So unless you want to use it in Sweden with the original carrier you may as well sell it to someone who can use it there.
Edit - I tell a lie, one of the carriers 3 do offer unlocking but not the others.

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

I am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

This is for Windows: http://support.apple.com/kb/TS1538

Hello!i have problem to insttal potoshop cs6 this is,we've encountered the following issues.installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.please,help me

this is,we've encountered the following issues.
installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.
please,help me!

Hi there Mylenium, is there any way you can help me? My cs6 is doing all kinds weird things lately. The liquifying too stopped working completely, when I try to work with the actions, it starts flickering and changing opacity in color by itself. It starts flickering and is completely out of whack! I tried uninstalling and reinstalling and still no luck. I tried getting in touch with adobe and no luck with that neither! Is there anyway you might be able to help?

Itunes Installation Problems!! Please help!!!

Similar Messages

Maybe you are looking for