Itunes installed on Windows xp Pro 64 bit

I just built a new computer using an AMD 64x2 processor. The operating system is Windows XP Pro 64. I used Itunes on my old 32 bit xp, but now I can't get Itunes installed on the 64. Is there a different driver I need to install and if so where can I get it.

Here's a tip from another user that might work; I can't vouch for it myself:
If you've got Vista x64, you need to open a Command Prompt box and run the command there, changing directories first:
cd c:\windows\SysWOW64
regsvr32 /u vbscript.dll
You'll also need to configure a symlink to help iTunes find Quicktime:
mkdir "c:\Program Files (x86)\QuickTime"
mklink /d "c:\Program Files\QuickTime" "c:\Program Files (x86)\QuickTime"
After installation, you should probably close the Big Fat VBScript Security Hole:
regsvr32 /u vbscript.dll
Hope that helps.

Similar Messages

  • I can't install itunes on my windows 7 (32 bit), I can't install itunes on my windows 7 (32 bit)

    I can't install itunes on my windows 7 (32 bit)... it keeps saying R6034 error and 1114 error.
    Help!
    PS: I used to have an older version of itunes and it worked fine until I tried upgrading it, Now it's totally messed up!

    Hello seppht,
    I recommend following the steps in the article below when you are unable install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    You can also download the 64 bit version of iTunes here:
    iTunes 11.0.4 for Windows 64
    http://support.apple.com/kb/DL1615
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

    I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

    For such situation, I'd suggest the following:
    1. Remove current installed office with the fix-it tool in
    KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
    2. Either download a trial version of Office 2013 from
    http://office.microsoft.com/, or from
    http://technet.microsoft.com/en-us/evalcenter/jj937170
    3. Reboot your computer in clean boot mode, and run setup again
    Max Meng
    TechNet Community Support

  • CAN'T INSTALL ITUNES 9 ON WINDOWS VISTA 64-BIT OS

    Hey guys!
    I'm having a reaaaallly hard time installing iTunes on my Windows Vista 64-bit OS. Everytime I think it's about to finish installing, it shows me this message:
    What does it mean?? Can someone PLEASE help me, I haven't had music on my iPhone for 4 weeks now!

    Curses ... you did everything right by providing the screenshot, thanks. But we really need to see the error message number that shows up after the "HRESULT" bit for one of those, and it's deciding not show us that.
    Okay ... people who get these error messages for iTunes installs typically are also getting Windows updates failures too. So we'll try to work out what the iTunes/Updates issue is by checking your Update history.
    Go into your Windows Update and click "Update History". Have updates been failing for you recently? If so, doubleclick on each failure to bring up a small window showing some info about the failure.
    What error message codes are you getting for the Windows Updates failures? (For example, 0x8007000B, or something else?)

  • Hi I am unable to install itunes on my Windows 8 64 bit PC, can you help please

    Hi I am unable to install itunes on my Windows 8 64 bit PC, can you help please

    Many thanks.
    the message I get says unable to remove old version of itunes
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I have an ipod touch 5th gen. i first loaded itunes on a windows 7 64 bit machine. i then got a new windows 8 64 bit machine but itunes will not load on it. i keep getting 2503

    i have an ipod touch 5th gen. i first loaded itunes on a windows 7 64 bit machine. i then got a new windows 8 64 bit machine but itunes will not load on it. i keep getting 2503 & 2502 errors. some apple software loaded, but it will not let me uninstall it from the machine. any thoughts, about how to get itunes to run on my machine?

    Try:
    Trouble installing iTunes or QuickTime for Windows
    Next try posting in the iTunes forum

  • Why am i having trouble updating itunes  on my windows 7 (64 bit) computer?

    Why am I having trouble updating itunes on my windows 7 (64 bit) computer?

    Doug
    Thanks for the update.
    nothing is getting installed, copied or otherwise loaded onto my computer....first the program starts to load, then it asks for my serial number, then it goes out and seems to check the serial number then it says it can't be installed then it erases everything it just spent 10 minutes loading.
    In view of the above and your prior descriptions, have you tried alternative installation files?
    If you want to give a look to that approach, please download and install the tryout files for Premiere Elements 9 from the following web site and then insert your purchased serial number into them during installation.
    With this route, you need to carefully carry out the web site's "Note: Very Important Instructions" in order to avoid an Access Denied message.
    Photoshop Elements 9 / Premiere Elements 9 Direct Download Links | ProDesignTools
    Back to my questions from post 3
    Are you getting any Shared Technologies error message any where in the installation process that is failing?
    If you follow the following path, do you find an OOBE Folder?
    Local Disk C
    Program Files (x86)
    Common Files Folder
    Adobe
    and in the Adobe Folder should be the OOBE Folder which you rename from OOBE to OLDOOBE to disable it.
    When you are forced into a roll back for whatever installation has taken place, do you ever see a message about Shared Technologies?
    And, whether or not the program installs to any extent, does your computer have the OOBE Folder? If so, then please rename it to disable it before
    you try for another 9 install.
    Looking forward to your results.
    ATR
    Add On....Please remind me....since you purchased Premiere Elements 9, have you ever installed and used it successfully on any computer?

  • I have downloaded Indesign CC2014 and installed 3-4 times but it doesn't run. I have installed on  Windows 7 64 bit ,  HP laptop i7

    I have downloaded Indesign CC2014 and installed 3-4 times but it doesn't run /work. I have installed on  Windows 7 64 bit ,  HP laptop i7.

    sign out and then sign back in to your cc desktop app.
    then install cc 2014.

  • How Do I Get PageMaker 6.5 Installed on Windows 7 Pro?

    I've been running PageMaker 6.5 in Windows XP Pro SP 3 for several years, but my XP system has broken down and I have had to upgrade to a Windows 7 Pro machine. How can I install PM 6.5 or newer upgrade so I can open, edit, and create new PageMaker files in the Windows 7 Pro operating system?
    I'm sure PageMaker has upgraded several times since I last purchased it, but I have no idea what the current upgrade is. What is the oldest, most affordable upgrade which will still open and edit PM 6.5 files and still install in Windows 7 Pro?
    Thank you so much. I've written an educational program to teach and help Military Combat Vets who suffer PTSD and I'm doing the training free of charge,so I can't really afford to pay for a major software upgrade.
    Judi Stifel :--)
    Port St. Lucie, Florida

    Thank you both for responding.  I do have one system with XP running so I can open PM files and edit and then save as PDF and transfer to the Win. 7 system, unless the XP system dies again.. which still leaves me in an insecure position.
    What program took over for PM and still opens old PM 6.5 files?   It's scary to think that my crashed XP system is the only link between my good PM files that I still use and disaster. If my XP system dies again and can't be revived, I'm in trouble.  Yes, I have two sets of new XP disks but my computer keeps spitting them out...  So far, so good... but for how long I don't know.   So much for proprietary systems.
    Any suggestions for an upgrade from PM to another replacement program that Adobe put in place to carry on with PM files?
    Thanks again.
    Judi

  • HT5639 After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do?  i have using bootcamp 5

    After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do?  i have using bootcamp 5

    if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp

  • CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing.

    CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing. This is a brand new machine. This is one of the first things I'm installing on it. I'm running Windows 7 Home Premium 64-bit. The disks are fine. I have the programs installed on my two XP machines. When I run the disk, I get the window pop up that says "Initializing Installation for Adobe Creative Suite 3". Then the disk stops spinning and nothing else happens. No error message. Nothing else happens. I'm baffled. I have searched several discussion boards and cannot find anybody that has had a similar install issue like this.

    Old_Timer I would recommend reviewing your install logs to determine the exact error message.  You can find details on how to locate and interpret the logs at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • Why downloadhelper not installed in windows 7 64 bit?

    why downloadhelper not installed in windows 7 64 bit?
    == After install when try to run or open

    Hi.
    You should ask the extension's author for support.

  • When I went to bed I had 3,000  song and multiple playlists.  This morning I have ~30 songs and no playlists.  What could have happened to my songs playlists?  I run iTunes on a Windows 7 64-bit machine.  HELP! (oh, and the Songs are not in recycle bin)

    When I went to bed I had 3,000  song and multiple playlists.  This morning I have ~30 songs and no playlists.  What could have happened to my songs playlists?  I run iTunes on a Windows 7 64-bit machine.  HELP! (oh, and the Songs are not in recycle bin)
    My wife's ipod nano was plugged into the machine overnight.
    When she went running with it, there were no songs on it.  She checked the computer and was horrified to see that the playlists had disappeared and most of the songs had disappeared.
    QUESTIONS:
    1. What could it be?
    2. How can I fix it?

    Hi, there alot of us suffering from this phernomonon but there is a forum topic about is already.
    https://discussions.apple.com/message/16767377#16767377
    Come check it out.
    Hope this works out for all of us.

  • I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

    I need help with deactivation.
    I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

    if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
    but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • Can I clean install a Windows 7 Pro System Builder on a Lenovo PC with Windows 8 preinstalled?

    Hi. I would like to clean install windows 7 on a Lenovo PC  that came with Windows 8 core preinstalled. I want to format the entire drive and remove windows 8 and clean install windows 7.  I already tried the clean install of Windows 7 Pro to get all of my drivers in line, and now I would like to buy a Product Key.
    Would  a Windows 7 Pro System Builder work in my case? Would it work just as smoothly as a retail version? I understand that the System Builder is an OEM version that includes the Product Key, COA, and DVD) Just want to make sure before I buy the System Builder version of Windows 7 Pro.  Thanks.
    Grazzie
    Solved!
    Go to Solution.

    that should be retail since it seemed to be used for pc upgrades either way your new system builder key should work. those are called refresh because they re-released them sincea bug was found in thier installers. Do you have any key in the computer atm? or is windows just waiting to be activated? 
    EDIT: its a good copy look here>  http://www.heidoc.net/joomla/technology-science/microsoft/14-windows-7-direct-download-links
    Should you want to use the DVD images permanently, and don't own a product key yet, you can order a Windows 7 OEM or retail version from Amazon. The OEM reinstallation versions contain a DVD with a product key just like the retail versions. They are significantly cheaper, but lack a proper box packaging, and don't include technical support by Microsoft. The OEM key will work with the Digital River downloads, so you can just pick the cheapest one. Sometimes better editions are the cheaper ones, so all of the following links to Amazon offers might be worth checking. I've already tried to find good deals for all editions and linked to them here:
    I own a Y510p SLI, and Yoga 2 Pro

Maybe you are looking for

  • What went wrong ?

    Dear all, I`m trying to figure out what went wrong with my database. During the higher load the users were suddenly getting DBIF_RSQL_SQL_ERROR, no matter what they wanted to do. When checking system I found many messages like: Database error -1000 a

  • How to initiate some action when user clicks a field in CRViewer?

    <p><span style="font-family: Courier"><font size="1">ReportObjects doesn't expose click event despite the fact that a field can get focus frame, you can even tab from field to field. </font></span><span style="font-family: Courier"><font size="1">Dri

  • DMP4310 won't connect via DVI

    I tried all possible possibilities to have the player display content on a Samsung LCD screen. I am using a DHMItoDVI adapter to connect the DMP through its HDMI cable. Autodetection fails. I tried Autodetection and configured the attributes manually

  • Need help with IQ02 - using a FM do update a value in this transaction

    Hi, I am trying to change the Aquisition value (as in transaction  IQ02) using either of following FM: ITOB_SERIALNO_MODIFY_SINGLE SERIALNUMBER_LIST_UPDATE However the changed value of field (ANSWT) is not getting reflected in database. I tried ABAP4

  • More FM 8 PDF Issues

    I cannot create a PDF file by either printing to the Adobe PDF printer or by saving as a PDF file. FM 8 crashes every time with the Internal error 8004, 6343116, 848334, 0. I have no prior version to return to using. I cannot print to a .ps file - sa