Itunes is constantly looking for the express
About every 30 seconds itunes stops playing the song and then it starts again about 10 seconds later. It continues to do this and does not play through a full song.
I have it set up as part of another network and it worked fine for about two weeks.
Does anyone have any ideas as to why it might be doing this or suggestion as to how I might fix it?
I thought I might give some updated information based on my current findings. It seems like it is actually a proximatey problem. Taking my computer closer to the unit seems to resolve the problem, but it is definately not out of range where I was trying to transmit from. I was still getting almost a full signal. Has anyone else had the same problem with the range not being very good?
Similar Messages
-
Switched from NAS to external harddrive but Itunes is still looking for NAS
I used to have a NAS (Net attached storage) and i switched to a Seagate 1TB external harddrive, I copied the whole Itunes library, program etc...and it runs but it is 7.6 version so it would not identify my ipod until i updated the software, so i go to update, download the update and go to do the update and I get a error message that it cant locate //nas/disk1 the old destination...I went so far as to delete itunes and Quicktime and redownload itunes 8.1 so i go to install it and it is still looking for //nas/disk1 now i have a folder with 375gb of music and movies and no program to run it.... I try to go into control panel add/delete programs and itunes is still in there so i go to delete and I get a error message that it cant delete it because it cant find //nas/disk1...*** I need help Please someone tell me what i have to do to I was able to delete quicktime but it still shows itunes and it will not let me install itunes...i did a search through the computer and ther are no files for itunes so i do not know why it is still trying to locate it from there....HELP
Hi,
The reason that you are getting the ! is because iTunes is still looking for the music on your external hard drive.
You need to create a new library iTunes: How to open an alternate iTunes Library file or create a new one
Now turn on iTunes Match and select add this computer. You will now see all your music in the cloud. When you want to add new music, revert to the original library on your external hard drive.
Jim -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I downloaded from iTunes a hd movie for the first time. What a disaster ! Keep stopping and looks like after 2 days has not been downloaded. What am I suppose to do? Can I get my money back? How?
Contact iTunes suport... http://www.apple.com/support/itunes/contact/
It sounds like you might have a slow wifi internet connection? How fast is it with a speed test from your iPad. -
i cannot transfer movies on my iphone 4s eventhought its mp4 format. it say 1 item could not be sync see itunes for more information. Tried to look for the reset warning on itunes 11.0 but cannot locate it. Help please
Hello eLZhi,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides the most relevant information to your question:
iOS: 'Not enough free space' alert when trying to sync
http://support.apple.com/kb/TS1503
Thanks,
Matt M. -
I had to change the computer I have iTunes installed on, my iPhone is still looking for the old computer to sync over WiFi. How do I change the WiFi computer associated to my iPhone?
Hi Terri571,
Welcome to Apple Support Communities.
See these steps for setting up Wi-Fi syncing between your iPhone and new computer:
iOS: Syncing with iTunes
http://support.apple.com/kb/ht1386
Wi-Fi syncing
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
In the Summary tab, select "Sync with this [device] over Wi-Fi".
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
The iOS device is plugged in to power
iTunes is open on the computer
The iOS device and the computer are on the same Wi-Fi network
While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
If the iOS device does not appear in the Devices section or you are unable to sync, please see this article for troubleshooting.
Best,
Jeremy -
Why is my Mac Book constantly "looking for networks" while i am using wifi?
If it is constantly searching for networks every five seconds or so, then it is the bluetooth - wifi problem discussed on other threads. I find that system preferences > network and clicking at the bottom on the 'Show wi-fi status in menu bar' button to switch it off, and then back onto the menu bar, solves the problem. Sometimes on waking I lose wi-fi completely and have to reload, but that's infrequent.
Hopefully Apple will come up with a solution soon. -
When my husband and I try to import from each other's libraries, using Home Sharing, we are intructed to look for the "Show" menu at the bottom of the screen. Neither of us has anything like this on our screens. How and where do we locate it? We both have the latest itunes running.
Hey fantail163,
If you are not seeing the button to show menu, try out the troubleshooting steps for Home Sharing.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My iTunes library will no longer sync to my iPhone or iPad, nor will it play from my Mac. My Library is on my external HD. iTunes is correctly looking to the HD as its library. Please help...
Guys, I found another user and what he said to do worked!!! I have copied the information below:
This was 1 of the things that happend to me too, the other one was that at the bottom of the itunes page were it says all the memory info, it marked that I had over 3gb of other memory wich I didn't.
Anyways what I did was to unmark the calendar, contacts etc. ( so that they wont sync with the computer ), pressed apply, then I marked all of them again, apply again and for last I pressed Sync wich is at the bottom right coner by the apply botton.
I'm not sure that had anything to do with it but it worked, my music appeard both of my itunes playlists and the ones I bought in itunes. Also the other memory dissapeard and it's all good.
I'm not sure this will help you but thats my 5 cents, if the problem continues its better to call customer service and ask for a technician.
Hope your problem gets solved. Have a nice day. -
I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. My iTunes is version 11.0..3.42, iPhone is 6.1.4, and iPad 6.1.3. Any suggestions?
All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.
-
What is NetAuthAgent and how can I get it to stop looking for the unnamed file?
Since the last Mountain Lion update on my MacBook Pro, I get this error message every few minutes:
2013-12-16 1:19:04.338 PM NetAuthAgent[1739]:
inErrorInfo = {
AuthType = Server;
ErrorNumber = 45;
ErrorType = 4;
Scheme = file;
How can I get it to stop looking for the unnamed file?
Kat NagelIf streaming music when connected to your carrier's cellular network, it uses cellular data.
Only the music you purchased from the iTunes Store can be streamed unless you have purchased iTunes Match.
If there is a slow down at the server where the music is stored or high traffic, steaming can be paused. You can also download a song from the iTunes Store cloud to your iPhone so it doesn't need to be steamed. -
I cannot install or remove old itunes, install is looking for an msi
When I try to upgrade to lates Itunes or Quicktime, I get error message saying it cannot find an msi on a network drive. Same error message if I try to uninstall the existing itunes.
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
http://www.apple.com/itunes/
If you have 64bit Vista or Windows 7, look for the seperate download of iTunes for that further down the page.
Once installed, use the Apple Software Update under your Start Menu to fully update all Apple components.
Your content will remain on the drive in the Music > iTunes Folder, nothing is deleted.
You should be making backups of your content regularly, either through iTunes or via copying the iTunesFolder in your Music folder to a external drive.
Windows is notorious for having "other" issues that make it unstable, we as volunteers helping others can't always resolve those issues.
After doing the steps above, stand by and others may be able to assist you. -
i didnt have issues with itunes before...but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial....but still cant open itunes store. im looking for music to buy.
Hello bogley
Check out the article below for troubleshooting access to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
If i go to general and look for the software update button, there is not one on my ipad2. What do i do then?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?
You likely have a 2G iPod and those can go higher than 4.2.1
A 3G can go to 5.1.1
IA 4G, with cameras can go to iOS 6.1.6.
The 5G, also with cameras can go to iOS 8
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
Identifying iPod models
Maybe you are looking for
-
How can i install my t-mobile sim card to iphone 4
how can i install my t-mobile sim card to an unlocked iphone 4 gsm i got for Christmas?
-
How to keep same sender file name for receiver mail attachement
Hi, i am working with File to Mail scanario. There i want to pick a flat file from native file system and then send it as email attachment. Now i am able to send the file but the flat is getting converted as an xml file. is there any method to keep
-
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255
Hello All We have a server 2008 R2 HyperV server and during the last few months it started to reboot randomly. Initially we thought its related to the issue fixed by the following hotfix so we applied it but even with the hotfix it still keeps reboot
-
ITunes crashes when changing properties for Printer in Windows XP
I know this has similarly been posted already, but since the post I read had been ARCHIVED, I could not respond to it. (In my experience) Its not the fact that the properties button was pressed on the Print window of iTunes, but that an option in the
-
Column widths OK in Firefox & Opera, NOT WORKING in Internet Explorer?
Hi there, I've got a table based website and for some reason Internet Explorer is messing up my layout? It works fine in Firefox and Opera but IE is extending one particular <td> tag beyond its set width? What's even more strange is that the proble