ITunes is locked up on the IPad-how do I unlock

ITunes is locked up on the IPad-everything else is fine.  How to unlock ITunes.

Quit iTunes and restart your iPad,
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work - reset your iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

  • TS1383 my ipod has lock sign in the display - how do I unlock it?

    My ipod diusplays a lock sign - how do I unlock it. Never seen this before in years of use.

    In the upper right hand corner of the iPod's display?  If so, make sure the hold switch along the top of the device is set in the Off position.
    B-rock

  • My daughters ipad is locked she forgot the password how can we unlock it?

    My daugther forgot the password and I can't get it unlock can you pls help me

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad/iPod into Recovery Mode
    http://support.apple.com/kb/ht4097

  • I just got my refurb iPad in the mail. I am trying to set it up, but im getting this message "iTunes could not back up the ipad because the backup was corrupt or not compatable with the ipad. Delete the backup for this ipad. then try again." How?

    I just got my refurb iPad in the mail. I am trying to set it up, but i am getting this error message " iTunes could not back up the ipad because the backup was corrupt or not compatable with the ipad. Delete the backup for this ipad. Then try agian." How do I do that?

    It sounds like the iPad wasn't erased to me. If the iPad is totally cleared of content, there should be nothing on it and no backup to create.
    Without connecting the iPad to your computer - Launch iTunes on you computer and go to Edit>Prefences>Devices. Do you see an iPad backup in there? If you do see it, delete it.

  • How do I get rid of error message, "iTunes could not back up the iPad because an error occurred."

    During a recent syncing of my iPad and iTunes, I cancelled a sync during the backup step of the process.  Since then I whenever I sync the ipad I know get, "iTunes could not back up the iPad because an error occurred."
    I have reset my iPad and turned off the MacBook, still the message occurs.
    Can someone offer some advice on how to get rid of this error message?

    You can try deleting your backup. Launch Itunes on your Mac and go to iTunes>Preferences>Devices. Highlight the name of the iPad backup and select delete. Quit iTunes, restart your Mac and try to sync again.

  • HT1212 My ipad displays the message ipad is disabled- connect to itunes. When i connect to itunes, it says in itunes- Itunes could not connect to the ipad "Name" because the ipad is locked with a passcode, but ovbiously i cant unlock my ipad. HELP!!!

    When i connect to itunes, it says in itunes- Itunes could not connect to the ipad "Name" because the ipad is locked with a passcode, but ovbiously i cant unlock my ipad. HELP!!!

    Hi mChelle,
    Follow the instructions that best apply to your situation in the link below:
    http://support.apple.com/kb/HT1212
    Cheers,
    GB
    Oh - I see that you have that article linked to your post above. Read the entire paragraph in item #1. It tells you what to do if it is asking for a passcode.

  • HT4061 my phone is locked, so I am unable to get the serial number or anything else---the store told me to go to Itunes, but it states that it's locked which I already know---how can I unlocked or go back to factory reset

    my phone is locked, so I am unable to get the serial number or anything else---the store told me to go to Itunes, but it states that it's locked which I already know---how can I unlocked or go back to factory reset

    If you have forgotten the passcode for your phone, see this support document. http://support.apple.com/kb/ht1212

  • HT201263 itunes could not connect to the iPad because it is locked with a passcode. I don't have the computer where I last sync

    itunes could not connect to the iPad because it is locked with a passcode. I don't have the computer where I last sync

    Actually I'm the nanny of a 6 year old girl. And is her iPad, my boss needs that this iPad work again because the little girl is making everybody crazy. Please helpppppppp

  • I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

    I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • ITunes could not connect to the iPad because it is locked with a passcode.

    I just bought a 64GB iPad in France on my journey. In Denmark we haven't got it yet, so there's no support for me yet...
    In the french store they let me connect to iTunes on one of their Macs, so I could enter my new iPad. Then I played with it the rest of the day (didn't sync with my MacBook, cause it is being fixed) and also put in a pascode as I do with all my devices.
    Next morning when I turned it on, it only showed the "connect to iTunes" symbol again, as if it was new. And when I connect to iTunes, iTunes only says "iTunes could not connect to the iPad because it is locked with a passcode. You must enter your pascode on the iPad before it can be used with iTunes"...
    And that is a contradiction! I can't do what the iPad says and i can't do what iTunes says...
    Any ideas? Any ways to reset it other than by holding down both buttons at a time, because I have tried that already.
    Hopefully someone can help me, I really want to be able to use my new iPad

    pathfinder172Jun 1, 2014 8:05 AM Re: iTunes could not connect because it is locked with a passcode...?
    Re: iTunes could not connect because it is locked with a passcode...?in response to rhmcolvin
    I have a much easier possible solution!!
    I had this same issue, trying to connect my new iPhone 5s to my Windows computer's iTunes. I was getting two different error messages:
    - iTunes could not connect to the iphone because it is locked with a passcode
    - iTunes could not connect to the iphone because the device timed out
    I found this thread, but did not like the idea of having to restore my iPhone and losing all my settings/data on the phone. After trying several different things, I discovered that I had 5 devices listed under my "Devices" that were authorized, so the real issue was that I had reached my limit. I had several issues with my old iPhone 5s, and had to have it replaced twice. As a result, I had several old iPhones listed under devices that I no longer had. Erasing those solved the problem, and my new phone connected just fine to iTunes. To get rid of the old devices, you can:
    Open iTunes
    -> click on "store" in the upper left corner
         ->  from the drop-down menu, select "view account"
              -> enter your password
                   -> under "iTunes in the Cloud", click on the blue "Manage Devices >"
                        -> remove any old devices
    This solved my problem. Hope it helps others as well!

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I have a iPad and a iPhone. I am logged into the same Apple ID on both devices. Every time I download something on my phone it automatically downloads on the iPad how do I turn this off?

    I have a iPad and a iPhone. I am logged into the same Apple ID on both devices. Every time I download something on my phone it automatically downloads on the iPad how do I turn this off?

    you need to turn automatic downloads off - its under settings>itunes & app store

  • Unable to sync or backup my iPad2 with the new iTunes. I keep getting the error ""iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.". I've deleted all the old backups but still get this.

    I'm totally frustrated by iTunes and don't know how to solve my problem. Like a lot of people on here I'm not able to sync or back up my iPad2 with my iTunes (version 10.4.1.10). I'm running Win 7 Ultimate 64 bit. My iTunes worked just fine until the 10.4.xx updates came out and since June I've not been able to back up or sync the iPad2.
    When I connect and try to sync I get the error message, “iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.”
    I've deleted all the old backups so there are none on my system. I've deleted iTunes and re-installed the 64bit version several times but it has not made any difference. I've read and followed several suggestions on these boards about how to remove and reinstall everything but none have worked yet. I'm stumped here.

    I had the exact same thing with my shuffle - same error message saying that it was corrupt so I restored it (wiping everything in the process) and the same message came up as soon as it reloaded. Thank god I didn't try it with my iPod or iPhone first. So many issues with this new version of iTunes!!!!!!!!

  • HT4356 When printing from the iPad how to control how many pages of the document to print?

    When printing from the iPad, how to control how. Any pages of the document to print?

    You got me curious (even though I've never used coupons.com, and I have an AirPrint printer).  So I checked out coupons.com in the iTunes Store and found the following two reviews that I think explain everything:
    Based on the above, my conclusion is coupons.com is set up to print on wireless HP printers from an iPad.  You could print to a non-AirPrint HP printer as well using an app from the iTunes Store.  But the non-AirPrint printers do offer considerably less compatibility with Apple's iPad applications than the AirPrint ones do.  For example, in the Epson case, non-AirPrint Epsons can print from Safari but not from email.

  • Once an iBook has been exported to the iPad, how can that book be moved to a different iPad or back to iBooks Author?

    Once an iBook has been exported to the iPad, how can that book be moved to a different iPad or back to iBooks Author?

    You can't simply move it directly between iPads.
    In your example, you'd find that .ibook file in your iTunes account on your computer and then email or sync it to the school's iPad. Similar to how you did with yours....maybe you got it off a server and can repeat that process.
    Then delete it off your iPad and either delete or flag your copy in iTunes to not be put back when you sync in the future.

Maybe you are looking for

  • Need help with a small application

    Hi all, I please need help with a small application that I need to do for a homework assignment. Here is what I need to do: "Write an application that creates a frame with one button. Every time the button is clicked, the button must be changed to a

  • Seeburger AS2 Adapter:  Receiving multiple messages

    Hi guys, I'm having some trouble using AS2 Adapter for receiving multiple messages. The problem is really similar to Peter's problem. Seebuger AS2 adapter for XI as sender for multiple messages I have it configured for one scenario and it's working f

  • How to run exe in servlet?

    I need to run a local exe program and here is the code in servlet. private static Exception error = null;            public static boolean runBatch() {                 boolean result = false;                 try {                      Runtime r = Run

  • How to include a DFF in search

    My requirement is, I have a DFF. I want to make the DFF fields searchable in OA framework. How can i achieve it?. Please advice by steps. Thanks

  • EAS  - Weblogic Configuration Problems

    I have bothe Shared Services and Essbase installed under 64bit AIX. They are on separate lpars. I have started to have problems when working on the outline that require me to start and stop the application (right click on the application start - stop