Itunes is not loading after i've updated to ios7. What do i do?

Itunes is not loading after i've updated to ios7. What do i do?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Similar Messages

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Aperture 2.1.4 update will not load after Snow Leopard update

    Has any one found the fix for aperture 2.1.4 update not loading after the installation of Snow Leopard. I to am also getting the alert "aperture 2.0 or later is required to install the update". I installed my copy of aperture 2.1 using the installer with no problems so the program is in the correct location. I've seen the posts related to this problem and it does not seem a fix has been found.

    Just ran into this myself. I did check to see if there was a preference to delete under ~/Library/Preferences and one is not created since 2.1 is never actually launched. 2.1 is sitting in the root of Applications and hasn't been renamed, but the 2.1.4 update just doesn't detect that it is there and just gives the alert "Aperture 2.0 or later is required to install this update."

  • Itunes library not loading after upgrading

    Please help:  I had to upgrade my itunes when I plugged in my Iphone and now it won't sync.  No matter what I plug in (Ipad, Ipad2, Iphone or Ipod) the only thing that happens is the Iphotos will pop up and recognize that I have plugged in my device, but the Itunes does not load and sync.  I don't know if I did something wrong, put when it asked if I wanted to use Icloud I clicked no.  I don't know if that is my problem now or what. If anyone can help, I would appreciate it, as I am lost! 
    Thanks, Debbie.

    johnc86,
    Are you following the instructions from this article in the Apple Knowledge Base, in particular the renaming of the .itl file from the Previous Libraries folder?

  • Apps not loading after 3.0 update

    Please help... My iPhone will not load any apps after the update. I have tried re-syncing, and even deleting and re-installing them but nothing will work. When I click on the apps they start to load but then it exits out of it. This happens to all of them. Please help because I am stuck and nothing seems to work.

    My 16GB iPhone 3G has been running 3.0 fine since last week. Now suddenly today all the app store apps quit back to the springboard screen a second or two after they launch. Built-in apps work fine still.
    This started after I was on a call, and switched to a purchased app while on the call. I got the green 'touch here to return to call' bar across the top of the screen. After a few minutes the other party hung up the call, while I was still in the app. Then there was nothing I could do to get rid of the green bar, short of resetting the phone. Ever since that, 3rd party apps crash on launch.
    I am trying resetting the phone to see if it helps.

  • Firefox will not load after an auto update

    I am running Windows 8.1, 64-bit operating system. I think that FireFox automatically updated today and now I cannot start FireFox. I get a box that states add-ons are being checked for compatibility. The 32-bit designation is shown and it just spins and spins and will not go beyond that screen. I've tried everything I can think of to start FireFox but nothing seems to work. Help I'm having to use IE and I hate it.

    Create a new profile as a test to check if your current profile is causing the problems.
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 29.0: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * (32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    * (64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    * http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    If you keep having problems then also create a new profile.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    Do a malware check with some malware scanning programs on the Windows computer. Please scan with all programs because each program detects different malware.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    * Malwarebytes' Anti-Malware:
    * http://www.malwarebytes.org/mbam.php
    * SuperAntispyware:
    * http://www.superantispyware.com/
    * Microsoft Safety Scanner:
    * http://www.microsoft.com/security/scanner/en-us/default.aspx
    * Windows Defender: Home Page:
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    * Spybot Search & Destroy:
    * http://www.safer-networking.org/en/index.html
    * AdwCleaner:
    * http://www.bleepingcomputer.com/download/adwcleaner/
    * http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    * Kasperky Free Security Scan:
    * http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    Anti-rootkit utility TDSSKiller:
    * http://support.kaspersky.com/5350?el=88446
    See also:
    "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.org/kb/Server+not+found
    * https://support.mozilla.org/kb/Firewalls
    * https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.

  • Itunes is not syncing after most recent update

    I am getting the error message "iTunes could not connect to the iPhone because the pairing record is missing"

    I had this problem and restarting iTunes was the solution

  • Help with iTunes store not loading after 10.4/10.5 updates

    Hello,
    Ever since the 10.4 update, I cannot login to the iTunes store. The status bar flickers and then stops half way. I thought the 10.5 update would fix it and it did not. I uninstalled/re-installed and still nothing. I see lots of others are having this same problem with no luck. iTunes "help" just sends me links to stuff I have already tried. My router has all the proper ports open, iTunes has proper permissions in my filters...basically nothing has changed on my end. Everything worked fine pre 10.4. It all started with 10.4! Anyone out there have a solution?

    Try this
    Reset the WinSock key
    If you are unable to identify the software that installed the LSP, you are unable to remove this software because it performs an important function for you, or you've removed this software and the issue persists, you may wish to reset the WinSock key.
    To do so, please do the following in an administrator user:
    Windows Vista and Windows 7: Right click All Programs and choose Accessories > Command Prompt. Choose to open as an administrator.
    Windows XP: Click Start > Run and type in cmd.
    Enter the following command: 
    netsh winsock reset
    Restart the computer and test the issue.

  • ITunes does not load after upgrading to 7.4.2!

    Installed iTunes 7.4.2 just right now. When I try to start it, all it will do is quickly flash "iTunes" in the menu bar without starting; sometimes not even that will occur. I opened the Activity Monitor to watch the app; iTunes does appear to start when I double-click by showing up in the monitor; however, after a few seconds it disappears.
    Anybody know what's going on?

    Do you have QuickTime 7.2 installed from the Apple website?
    Make sure to remove any "hackies", betas, and ShapeShifter, if installed.
    Go to /Library/Receipts/drag iTunesX.pkg to the trash and empty.
    Repair permissions ..... RESTART
    Reinstall iTunes 7.4.2 (Mac) from the Apple website +without performing any other processes during the download or install!+
    Repair Permissions
    DIXIE

  • Gmail not loading after latest Safari update - the one with the Top Sites

    After the latest Safari update - the one including the Top Sites feature - I can no longer open any messages in on gmail - it tells me that some of the features of gmail cannot be loaded due to problems with my connections. I can use other sites without any trouble, so I think that my connection is good. Also, when I try to use the older version of gmail, this doesn't work either. Has anyone else experienced a similar problem? Please help - this is very frustrating... Thanks in advance to everyone who will reply and offer an explanation and a possible solution.

    Hi
    I have a GoogleUpdateSofware folder which contains GoogleUpdateSoftware bundle and a folder named Ticket Store. Can this be causing the problem?
    Possible. One way to test is to go to the Finder. There, drag the Google folder to the desktop, then restart Safari. If that doesn't resolve the problem, return that folder to its original location. Then, try Safari from another User Account.
    If necessary, you can create a User Account in System Preferences>Accounts. Log on to the other account and open Safari. If gmail works there, then the problem is specific to your regular user account. In that case, log-in to your regular user account. There, open Safari. Safari Menu>Reset Safari. Select "empty cache", and "clear history", then select "reset". Restart Safari and try gmail.
    If it doesn't work in the other user account, then the problem is system-wide. If that's the case I'll post suggestions after you let me know what you discovered.

  • ITunes will not load after upgrade - says files missing

    i got a prompt that my iTouch had new software for download. I went to download it and was prompted to download the latest version of iTunes first. I did this and now I can not access my iTunes. I get a prompt that iTunes cannot run because some of its required files are missing.
    I am not sure what itunes version I had prevously but it was the latest version until I tried to upgrade. my itouch is version 4.1 (8b117). the itouch unit is a 2nd generaton. i am using windows 7 with IE 8.
    Please help. what should i do now? I cant get into my iTunes to sync my iTouch
    Thanks
    Tim

    I found out the issue with itunes. I had been using a converter program to convert movies for the itouch and the one I used also required a quicktime codec that must have interfered with itunes...I uninstalled the program...and itunes is back and running great. sorry to have rushed to judgement. Newfietom

  • Rendered preview files not loading after mavericks software update

    Once I render and save a project, exit out, and come back in, the rendered files that I "saved" are not rendered. This all happened after the mavericks software update

    Adobe/Jive have a BAD title for the SEARCH THIS FORUM function
    Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
    maverick
    or
    mavericks
    You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

  • My itunes will not open after I tried updating it

    how do I open itunes on mac if it doesn't want to?

    If Bengt's suggestions don't help try this basic troubleshooting fix :
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete IDVD'S cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iDVD folder. 
    Click to view full size
    3 - launch IDVD and try again.
    OT

  • Games will not load after instruction to update flash player..which is already up dated...only since downloading firefox 4

    also everything is slow and "jerky" such as typing, emails etc. have disabled and enabled plugins many times but no result. Should I try uninstalling firefox 4 and starting again. had no trouble with oldar version

    Thanks cor-el looks like Oracle need to update their linux installation instructions then. If only I'd have known that before doing all sorts to get it working.
    I now have Java in Firefox, Chrome and Seamonkey :) :) :) :) :).

  • HT1414 Ipod Mini not working after trying to update to IOS7

    Team Apple....HELP!
    I recently tried to in tall the new IOS 7 on my Mini Ipad....but I get the connect to Itunes with USB cable on the screen. 
    I've intalled the latest updates to the OS on my MAC Laptop and the latest version of Itunes.
    Itunes saw a system that needed to be restore and took two hours to down load something (sorry, can't recall).  After the down load, I'm still stuck with the conect to Ituense with USB cable on the screen.
    Ok, I've tried all the below intsrutction from these links, with no success:
    http://support.apple.com/kb/HT1414
    http://support.apple.com/kb/HT1808
    http://support.apple.com/kb/TS1591
    Any help or suggestions would be appreciated.
    G

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Maybe you are looking for