Itunes is not syncing after most recent update

I am getting the error message "iTunes could not connect to the iPhone because the pairing record is missing"

I had this problem and restarting iTunes was the solution

Similar Messages

  • Display changed/overscan not working after most recent update

    I'm running my mini through an LG 42" plasma TV using a store-bought HDMI to DVI cable, and I had the resolution at 1344x756.
    After I did the most recent update for what I assume was Leopard 10.5.7, my resolution and colour quality changed. Now with overscan on the picture is cropped and the dock is almost out of view when I hover over it, and with overscan off there is a black gap of about an inch framed around my screen. The only change ocurred after I reset the computer post-update. I tried re-installing the update and messing around with the cable connection to no avail.
    What are the odds that it was the cable? Is there anything you know of to roll back updates? Has this happened to anyone?

    I have exactly the same problem, on a Sony 36". With overscan on, I can't see the menu bar at the top of the screen, and lose a lot of the dock. By turning overscan off, and fiddling the display settings on the TV (altering area to -2) I can get it so it uses up more (tho still not all) of the screen, with all the bars etc.
    I could live with this, however it also seems to have screwed up the res. No matter what setting I use the fonts look fuzzy and hard to read. The tv screen was never quite as crisp as the monitor on our iMac, but I could read an e-mail without feeling nauseous.
    Hoping Apple will fix this....

  • My itunes won't open after most recent update

    I dont know what to do!  I have tried restarting nd reinstaling itunes but it still wont open

    I have the same issue.  Yesterday I allowed Window 7 64 bit to download a couple of updates and and service pack for Office 2010.  I have a new iPad 2 which I had not synced yet (we have multiple user accts set up on system and sync 2 iphone 4s and an Ipad 1st gen with no issue prior to this).  I opened iTunes and it indicated new version 10.4 was available so I updated it also.  After these updates my system became mush.  After attempting to start iTunes, the itunes.exe process loads but it sits there and hogs up memory and CPU.  I can come back to computer 10 min later and maybe it eventually opens but is very slow and eventually hangs up.  I then have issues on trying to kill the iTunes process in task manager.  Haven't even gotten close to syncing the new iPad 2.  I checked firewall settings, other services, tried running in other compatibility modes, and then checked on this forum for detailed instructions on the best way to uninstall all of the apple programs in specific order and then reinstall.  Nothing works.  So basically I have an $829 apple tablet that is 50% useless becasue I can't even sync it with my music, movies, and books.
    I have attempted to go back to version 10.3 with no luck either.  I am close to just returning my iPad 2.  My next attempt will be to do a system restore prior to the Windows 7 updates that I installed and then try installing iTunes 10.4 first before the windows updates to see if there is some connection.  I have read many posts on here where apparently many people are having issues with v10.4, especially on Win 7 64 bit systems, but it seems that Apple really hasn't addressed anything with this.  I would just like to get it working and sync the new iPad.  Anyone have any other suggestions?

  • No longer able to sync after most recent update.

    Just updated itunes (10.2.1) and then the iphone OS (4.3). After updating, itunes froze so I cancelled the sync on the iphone, rebooted itunes and tried again.
    Now it is giving me the message "The iphone cannot be synced. The required file cannot be found."
    I'm sure I could fix this problem by restoring the iphone through itunes but I had to do this once before and in order to do this one must be connected to the internet. However I get all my internet THROUGH my iphone. Once the iphone is wiped clean no more internet and thus no way to link back to the apple store to verify. Catch 22. If I were on a laptop this wouldn't be a big deal, just take it to a wi-fi hotspot and away we go but I have a 24" iMac. Any suggestions, anyone?
    Last time I ended up having to lug the whole damned thing to a friend's house, which I REALLY do not want to do again. At the same time, it would be nice to be able to sync the iphone. Any help would be greatly appreciated.
    Adam

    Try deleting the photo cache, as described here:
    http://support.apple.com/kb/ts1314

  • HT2693 My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

    My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

    First of all - you are running the proper iOS in order to use the latest version of Pages - correct? You need iOS 6 now.
    If so ....See if this helps. Maybe Pages will open after you try this.
    Quit the Pages app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or ..... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that didn't help backup and send your files into iTunes with file sharing.
    You could lose all of your files if you delete and reinstall the app. That is precisely why you should backup your iPad and send your files into iTunes using files sharing on the iPad. Do you backup or use file sharing?
    Backup your iPad, send the files from the iPad into iTunes using file sharing and then delete the app and reinstall it.
    Start here ..... How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    iOS: About file sharing.
    http://support.apple.com/kb/HT4094

  • Itunes is not loading after i've updated to ios7. What do i do?

    Itunes is not loading after i've updated to ios7. What do i do?

    Try a Restart.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
    Here is a link to their contacts with most of the information below.
    http://www.apple.com/contact/

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Itunes is running but will not open after most recent 9.1 update w/Bonjour

    I recently loaded the most recent update for Itunes 9.1 version on 3/31. Since then, I have not been able to open my Itunes. I think it might be related to Bonjour because I see that it was added during my most recent update and I have never had it on my computer before. Now, i cannot get back into Itunes. I installed the update but when I double click on the itunes icon to open the file - I get nothing. The screen never shows up. Yet when I go to the task bar it says itunes is running in the background but there is no evidence of this. Help - I have been installing and reinstalling for the past couple of days with no luck.

    I have three computers that are practicably clones of each other and the new itunes update failed on two of them but one worrked fine. Here is fix that worked for me. This fix was suggested by another member but I cannot recall or find his post. My system is WinXP sp3 with all the latest patches.
    1. Download AirPort Utility 5.5.1 for Windows http://support.apple.com/downloads/
    2. Open task Manager and stop the mdnsresponder process. The corrupted mdnsresponder will be using 50% of your cpu.
    3. Open control panel / add remove programs. Find the bonjour app and click on it.
    4. Note the corrupted version of bonjour 2.0.0.34 by clicking on the support link.
    5. Uninstall bonjour
    6. Restart Windows.
    7. Install the AirPort Utility. This will install a good working version of mdnsresponder. Restart windows again.
    8. Upon restart you will see a new the airport icon in your task tray. You can also find mdnsresponder.exe running under process in task manger with little or no cpu usage. Your bonjour app under add remove panel will now be version 1.0.106

  • After most recent update, Firefox keep hanging intermittently with "Not Responding".

    After the most recent update, my Firefox browser begins to hang intermittently with "Not Responding". I have checked the extensions and plug-in like Java, all of them are the latest updated ones. Everytime I open a new site or click on links to load another page, it happens. Every single time.

    '''is there a solution ''(temporary OR permanent)'' for this problem yet?'''
    i tried '''EVERY possible alternative'''; even when opened in ''''''safe mode'''''' or when installed for the first time w| '''NO addons or ANYthing else''' but the '''original default settings''', still does the same thing.
    mozilla people?? really?? no answer|feedback|suggestions, anything at all from u guys??
    if it isnt a version (browser, OS, addons, etc) issue, what is it that separates us from the users not having the problem?
    this is is very frustrating; h|e it's even more frustrating when there is no response from tech support. is it because there havent been enough people who have reported this same issue so there can be some interest & find a fix; OR is it that u dont know; OR that there is not & will not be any fix?
    we cant continue being users if we cannot use it. it's really my favorite browser, but if it doesn't work & u guys dont have a fix for it, then users w| this same problem wont have any other option but to switch to a different browser permanently.
    really mozilla??? nothing? a reply would be very nice...

  • Problems running java after most recent update

    After updating to the latest version of Java via Software Update a few weeks ago, I am unable to run the Java applet I need to run to log onto my scheduling system for my work. We use ClinixMIS software which is web based and appears to load a Java applet when I log in. Before the most recent update I had no problem logging in and I still have no problems logging in on older machines running snow leopord and earlier versions of MacOSX with previous versions of Java. When I called Apple and told them my problem the tech said it was because the version of Java is more advaced than the one Clinix is using. I asked how to go back to an earlier version and I was told I can't do it. When I tried to download and install an earlier version of Java the computer wouldn't let me do it. I am running the latest version of Lion on a 2010 MacBook Pro with a i5 processor. I tried Safari, Chrome and Firefox and nothing worked. Does anyone have any ideas or has anyone run into a similar problem? Clinix has not supported Macs in the past but when I talked to the guy they sent out to help with some other issues we are having he told me they had a "team working on it". That has been their response now for about four weeks.

    Get your IT people to talk to the ClinixMIS software developer and bring it to 2012 standards.

  • Adobe Premiere freezing after most recent update

    Hey all,
    I posted in here a while back because I was working with MTS files and seemed to be having an issue out of the blue with my projects freezing, where the video would play, but the cursor and anything I would click or move would not respond.
    I ended up transcoding to Prores and finished the edit. 
    BUT!!!  Even in the prores version this happened again, and I finally tied it to the universal counting leader.  Now I've used this thing many times before with no problems.  But since the most recent update (I'm now running CC v8.1.0) this keeps happening!  If I have the leader in the projects window and the timeline (or just the projects window) it's starts to freeze and behave like this.
    I'm not sure if it's only isolated to the universal counting leader, but if I delete it from my project, save and reopen, everything runs smoothly!
    Anybody have this issue or know why this is happening since the update?
    Thanks.

    Hey all,
    I posted in here a while back because I was working with MTS files and seemed to be having an issue out of the blue with my projects freezing, where the video would play, but the cursor and anything I would click or move would not respond.
    I ended up transcoding to Prores and finished the edit. 
    BUT!!!  Even in the prores version this happened again, and I finally tied it to the universal counting leader.  Now I've used this thing many times before with no problems.  But since the most recent update (I'm now running CC v8.1.0) this keeps happening!  If I have the leader in the projects window and the timeline (or just the projects window) it's starts to freeze and behave like this.
    I'm not sure if it's only isolated to the universal counting leader, but if I delete it from my project, save and reopen, everything runs smoothly!
    Anybody have this issue or know why this is happening since the update?
    Thanks.

  • Photoshop CC's Perspective Warp function not enabled with most recent update.

    I have the most recent updated version of Photoshop CC, using a MacBook running on 10.6.8, and the Perspective Warp function is not enabled. How do I fix this?

    I would guess you need to uninstall bridge cc and then reinstall without applying the 6.1 update
    (use the uninstaller in /Applications/Adobe Bridge CC)
    You can download Bridge CC direct from here
    Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
    And the Bridge cc 6.0.1 update from here any others you might need
    (don't install the 6.1 bridge cc update, because that is the update that breaks bridge on 10.6.8)
    All the Adobe CC Updates: The Direct Download Links for Mac OS | ProDesignTools
    Be sure you follow the directions where it says Note: Very Important Instructions or the links won't work.

  • Firefox crash on startup after most recent update?

    Once Firefox installed the most recent update, it will no longer open. It attempts to open, but immediately crashes and the crash report opens. I have tried to uninstall (deleting profile as well) and reinstall, but it continues to crash. This is the most recent version of Firefox, 8.0 I think. Pleeeease help, I hate IE.

    No. None of those are the issues. I had already gone through a lot of the help stuff before I posted this.
    And as I explained earlier, there is no crash ID listed that I can see.

  • My iPhone 4S isn't recognized by iTunes after most recent update to iTunes.

    So after updating to the most recent version of iTunes, my iPhone 4s will not sync with iTunes.  Before the update, no problem whatsoever.  It is recognized by my IOS (Windows 7) and I can see it on my control panel but how do I get it to sync?
    Thanks!

    The new iTunes *****! It wasnt able to backup my data too and after restoring I had to Restore with my a month old Backup(Contacts were intact in that). For your problem, Goto Edit>Preferences>Devices, click "Reset Sync Data", Close iTunes and reopen. This might work and if this doesn't than Restart Your PC and Hard reset your iPhone by Pressing Home and Sleep button together(This will just restart your iPhone and won't restore anything) than Sync, else a new update or magic will help you out(if you don't plan to restore your iPhone.

  • Some playlists will no longer sync to iTouch after most recent update

    I am struggling to get 3 playlists back onto my iTouch after a recent iTunes and iTouch software update. When I look into the playlist of choice on iTouch after syncing, it says no music available can download from iTunes.
    I don't understand why my playlists aren't syncing anymore.
    Anyone else have trouble with this? How do I fix?

    Does this thread help?
    http://discussions.apple.com/thread.jspa?threadID=2327696

Maybe you are looking for