Itunes is not working since update. Need help.

My iTunes cannot be opened after I updated the iTunes version. Did anybody else experience this? How can I get iTunes up and running. I hope I don't lose my songs..Appreciate any help...

Updating to 10.7.0.21 using an iTunesSetup.exe or iTunes64Setup.exe shouldn't touch your content. By way of an example, I've updated to 10.7.0.21 on two different computers using the downloaded installer files (using an iTunes64Setup.exe on the 64-bit system and an iTunesSetup.exe on the 32-bit system) and didn't lose anything.
(That being said, it's still always a good idea to maintain a current backup at all times, in case of disasters of any sort.)

Similar Messages

ITunes Store not working since update

I cannot load anything from iTunes store since the update. I keep getting the message "The network connection was reset. Make sure your network connection is active and try again"
There is nothing wrong with my network connection. It is working fine.
I am using Windows 7 pro 64bit.
Trying to download Google Maps. Bad enough I had to use that POS Apple forced us to use for the last 3 months now they won't let us DL the app that works??

Hello there, Ahonan.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Specifically:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Itunes is not working..i need help!!!

Its been 3 months without an ipod ... now that i finally got a new ipod my itunes doesnt work.... i dont know why its not working i click it to open it up and it says itunes has encountered a problem and needs to close.... i uninstalled it and than installed it many times... than someone told me to uninstall quicktime but it wont let me uninstall it.... please help mee

hi Scott!
I showed an error -3 when installing 7.0 quick time and now I can't access my any I tunes.
let's do a "diagnostic"
b careful
standalone QT 7.0.3 install:
b noir, "QuickTime Installation FAILED!! "Error Code: -1"" #1, 09:31am Oct 22, 2005 CDT
let us know
b precisely
what error messages and error message numbers you get on the install attempt.
love, b

U10i sony ericsson speaker not working...need help

u10i sony ericsson speaker not working...need help...thanks

Anyway thanks... Yesterday my handphone drop again,than the speaker suddenly recover.

ITunes does not work after update

After I update 10.5, my Itunes doe not work.

What specifically does not work? Any errors?
If you want/need help, provide specifics of the issue. We are not mind readers.

Why itunes is not working after update?

After the last update, itunes is not working in my mac, is totally frozen. I have no backup and I'm affraid of loosing everything that I have if I need to reinstall the OS. What can I do? Help, please.

After the last update, itunes is not working in my mac, is totally frozen. I have no backup and I'm affraid of loosing everything that I have if I need to reinstall the OS. What can I do? Help, please.

BDC program on COGI not working in ECC-need help

Hi,
We are doing a SAP upgrade from 4.6c to ECC. One of the custom tcodes which were using BDC programming on COGI is now broken.Since , COGI is now changed in Ecc 6.0 with respect to the output which is now inALV and the earlier Date funtionaliy button is no more there in ECC6.0.
We are still not to able to find relevant BAPI/function module/alternative for that matter.Rerecording COGI for new environment is not working since it involves alv call functions, which cannot be recorded in BDC.
Please provide any inputs/valuable suggestions for same.

Hello AlbertMarsh,
I've tried, and wasn't able to locate your My Best Buy Member ID with the information you provided to the forums. I'm going to need you to send me a private message by clicking the blue box at the end of my signature with your My Best Buy member ID.
I’m going to add more clarity to enuf's Trade-In post. The 10% bonus is on the total amount prior to the additional 30% promotion. So if you got $10 Trade-In credit and had 30% bonus ($13), you would get $1 additionally from original base value for Gamers Club Unlocked not $1.30. I hope that makes sense.
Blake|Social Media Specialist | Best Buy® Corporate
Private Message

I keep getting a message that my ipad could not be activated because activation server is unavailable and when i try to use itune its not working as well.Plssss help

i keep getting a message that my ipad could not be activated because activation server is unavailable and when i try to use itune its not working as well.Plssss help

Has this iPad ever been jailbroken, had the OS rolled back, or used a beta version?

BDC on COGI not working in ECC-need help

Hi,
We are doing a SAP upgrade from 4.6c to ECC. One of the custom tcodes which were using BDC programming on COGI is now broken.Since , COGI is now changed in Ecc 6.0 with respect to the output which is now inALV and the earlier Date funtionaliy button is no more there in ECC6.0.
We are still not to able to find relevant BAPI/function module/alternative for that matter.Rerecording COGI for new environment is not working since it involves alv call functions, which cannot be recorded in BDC.
Please provide any inputs/valuable suggestions for same.

Hi sowjanya,
I think you must have created the custom method to release the invoice, if not please create a custom method and write a zfunction module as below :
ZBAPI_INCOMINGINVOICE RELEASE( Inside this FM just call the standard FM)
BAPI_INCOMINGINVOICE RELEASE
COMMIT WORK.
ENDFUNCTION.
Then use the above FM to release the invoice.
It will work.
Thanks and Regards,
Swaminathan

ITunes not working since update, says I don't have insufficient privileges to access directory

Ever since the iTunes update it has not worked at all for me. So I uninstalled and tried to reinstall but it will not let me. I always get this pop up "The installer has insufficient privileges to access this directory: C:\Program Files\iTunes. The installation cannot continue. Log on as administrator or contact your system administrator". I am logged on as the administrator and I have turned off my antivirus. Somebody please help!

tunes. 9..1.1 insufficient privileges error for corefp -- itunes

Itunes not working after update..help please

I updated my itunes to 10.4 and since then it will not connect to the itunes store and synching is not working either. I've emailed Apple and tried their suggestions with no luck. There was a recent post on here in June with success and it was something to do with a proxy server??? Can someone help me reinstate my itunes please...i miss it!!!

Disconnect all devices from your computer. If you have not already done so after updating iTunes, repair permissions and restart your computer. If this does not work, b oot up from your install DVD and run "Repair Disk" from the Utility menu.

HT4623 My iPhone4s updated to 7.1.1 and now my internet and email is not working. I need help?

Sorry, I'm new to this, I installed IOS 7.1.1 on my iPhone 4s and now my internet and email is not working.
I have googled this on my computer and can't find any reference to this sort of problem.
I need help.
Thanks in advance.

Try this:
Go to Settings > General > Reset > Reset Network Settings
See if you are able to connect now.

Itunes, have to force quit, will not work since update

After the itunes and quicktime updates, itunes no longer works. After about 10 seconds after launching itunes, it tries to process and then you have to force quit itunes.
any thoughts or suggestions would be greatly appreciated.
Regards
Jim

brookesuk,
Thanks for asking...
A Quick primer
On Macs, the Macintosh HD (or whatever you have renamed it to) icon is on the desktop, right?
So if you open this, you see a Library folder, it is also referred to as /Library
(with the "/" indicating root level, i.e. Macintosh HD)
If you go to your Home folder, it has a Library folder too. It is referred to as ~/Library. (With the "~/" indicating user level)
Now, these steps (taken from KB 25398, section B3), summarize this well:
1. Go to ~/Library
2. Drag the Caches folder to the desktop.
3. Attempt to reproduce the issue.
4. If issue is resolved, drag the Caches folder to the Trash.
5. If issue persists, go to /Library.
6. Drag the Caches folder to the desktop.
7. Attempt to reproduce the issue.
8. If issue is resolved, drag the Caches folder to the Trash
Hope this helps,
Generik
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.8)

Tv adapter not working since updating ios

since updating my iPad 2 to iOS 8 my tv adapter no longer works, when I plug the adapter in a message comes up stating this device is not supported by apple

Hello jimtallis,
The steps detailed below may help get your TV adapter to function correctly.
Check the compatibility
Make sure the accessory is compatible with your device. If the accessory is on the Apple Online Store, you can see if your iPhone, iPad, or iPod touch model is listed as compatible.
If your accessory uses the 30-pin connector, you might be able to connect it to your device using the Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m).
See if your accessory's compatibility is limited. For example, some accessories might not charge iOS devices if they use FireWire instead of USB to charge.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
Allen

Photoshop not working since updated Aperture software

I have been using photoshop CS5 within Aperture for over a year now.
Unfortunately Photoshop has stopped working properly since I updated the Aperture software to the latest version.
I am trying to do some selective colouring but the brush tool is not working.
Thank you!

Fern1 wrote:
I have been using photoshop CS5 within Aperture for over a year now.
Unfortunately Photoshop has stopped working properly since I updated the Aperture software to the latest version.
If it is the Photoshop program not working, then resetting the preferences would be the first thing to try if you have already checked any tool options and layer settings that may be creating a problem.
Pressing the 'Option + Command + Shift' keys immediately after launching Photoshop will invoke the reset dialog before Photoshop loads it's UI. Use the options to reset as needed. Here is a link to the help file for more info:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab 64-74aaa.html
I am trying to do some selective colouring but the brush tool is not working.
Are you referring to Photoshop here or Aperture (both have brush capabilities)?
Note - there is currently a known issue with Aperture 3.2.3 that can cause issues with external editors and plug-ins:
http://support.apple.com/kb/TS4237
Hope that helps.

Itunes is not working since update. Need help.

Similar Messages

Maybe you are looking for