ITunes is syncing Notes that don't exist
I have recently changed the login details on my PC from a peer-to-peer network to being attached to a domain. After the changeover I had to reset all of my iTunes options for my new login.
After syncing with my iPhone 4 with Outlook 2007, I now have two sets of "Notes" on my phone but there is only one Notes folder in Outlook.
Can anyone tell me how can I merge these two sets of Notes on my phone, please?
When you reach the limit of 5 then you can deauthorize all, then authorize the active computers.
iTunes Store: About authorization and deauthorization
Similar Messages
-
Disable itunes account from computers that don't exist anymore
Hi,
In the past I had authorized my laptop and I guess a couple of other sources with the iTunes store account. That laptop died a sad death on my travels so I left it behind and I can't remember which other places I had authorized it on.
Now I only 1 our of 5 accounts that I can authorize.
Would like to know how to de-authorize from machines I can't get to.
Thanks.When you reach the limit of 5 then you can deauthorize all, then authorize the active computers.
iTunes Store: About authorization and deauthorization -
front row looks in the movies folder and lists the contents, right?
well it's showing titles in that are not in and have never been
in my movies folder.
nothing happens when selecting these (probably because they don't exist).
of course i can't delete since they do not appear in the finder or
spotlight search.
i tried deleting everything in the movies folder, of course all
that's left in front row are the movies that don't exist.
any suggestions?
Message was edited by: avinbcAre your movies, even though they're gone from the hard drive, listed in iTunes somewhere? That would make them appear in Front Row even under the Videos section.
The Front Row preference file does not remember anything except which module was the last one you used.
-Doug -
Deauthorizing computers that don't exist
How am I supposed to deauthorize computers that don't exist? Every time I've had to reinstall Windows, iTunes eats up another "authorization". Now all 5 authorizations are taken, and my iTunes purchases are useless. I only have 1 computer, Apple, so make this easier for Windows users, will you?
Every time I've had to reinstall Windows, iTunes eats up another "authorization".
Your supposed to deathorize BEFORE a re-install. Not after. iTunes makes it very easy to do that.
Now all 5 authorizations are taken, and my iTunes purchases are useless. I only have 1 computer, Apple, so make this easier for Windows users, will you?
Apple makes it easy enough to de-authorize your computer. You can even do a de-authorize all once a year. Log on your account and you should be able to not only view your authorizations, but have an option to de-authorize all of them. -
How do I show a count for rows that don't exist?
Hi, I'm trying to count the number of records grouped by rank(B,C,R),month,and year. Basically, anytime a part fails testing a record is entered which records the failure Rank and occurrence date. A record is only inserted if a part failed for specific rank. So not all 3 ranks will have entries. I'm able to count all ranks by month,year that do exist. But how do I get values of 0 for the ranks that don't exist? I just created a table qa_rank that has just one column rank with 3 records(b,c,r). but its not being used as of now. rank is just a column in qa_occ record.Here is my query.
select to_char(occdate,'YY') as yr, to_char(occdate,'MM') as mn,
rank, count(occdate)
from qa_occ
where q.occdate between '1-Apr-2005'and '31-Mar-2006'
and q.supplier = '11107'
group by to_char(q.occdate,'YY'),to_char(q.occdate,'MM'),q.rank
order by to_char(q.occdate,'YY'),to_char(q.occdate,'MM')
which returns this
YY MM RANK COUNT(OCCDATE)
05 09 C 2
05 10 C 2
05 11 C 1
05 11 R 1
06 01 C 3
06 02 C 1
06 03 B 1
06 03 C 2
I need it to return C,B,R for everymonth. If no records exist then the count for the month,rank should be 0. Any ideas? Thanks.something like:
SQL> with qa_occ as
2 (select to_date('09/15/2005','mm/dd/yyyy') occdate, 'B3661-RYPX-A000' part, 'C' rank, 4 indexpoints from dual
3 union all
4 select to_date('09/25/2005','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
5 union all
6 select to_date('10/11/2005','mm/dd/yyyy') occdate, null part, 'C' rank, 7 indexpoints from dual
7 union all
8 select to_date('10/20/2005','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
9 union all
10 select to_date('11/11/2005','mm/dd/yyyy') occdate, null part, 'C' rank, 4 indexpoints from dual
11 union all
12 select to_date('11/18/2005','mm/dd/yyyy') occdate, 'B3661-RYPX-A000' part, 'R' rank, 0 indexpoints from dual
13 union all
14 select to_date('01/11/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
15 union all
16 select to_date('01/25/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
17 union all
18 select to_date('01/27/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
19 union all
20 select to_date('02/15/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
21 union all
22 select to_date('03/07/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
23 union all
24 select to_date('03/14/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
25 union all
26 select to_date('03/15/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'B' rank, 13 indexpoints from dual)
27 select * from qa_occ;
OCCDATE PART R INDEXPOINTS
15-SEP-05 B3661-RYPX-A000 C 4
25-SEP-05 B3661-RYP-A000 C 4
11-OCT-05 C 7
20-OCT-05 B3661-RYP-A000 C 4
11-NOV-05 C 4
18-NOV-05 B3661-RYPX-A000 R 0
11-JAN-06 B3661-RYP-A000 C 4
25-JAN-06 3511-RNA0-0111 C 4
27-JAN-06 3511-RNA0-0111 C 4
15-FEB-06 3511-RNA0-0111 C 4
07-MAR-06 B3661-RYP-A000 C 4
14-MAR-06 B3661-RYP-A000 C 4
15-MAR-06 3511-RNA0-0111 B 13
13 rows selected.
assuming that there are only three ranks available B, C,and R we considered this as a lookup values. now in the query below we incorporate an inline view for the lookup values:
SQL> with qa_occ as
2 (select to_date('09/15/2005','mm/dd/yyyy') occdate, 'B3661-RYPX-A000' part, 'C' rank, 4 indexpoints from dual
3 union all
4 select to_date('09/25/2005','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
5 union all
6 select to_date('10/11/2005','mm/dd/yyyy') occdate, null part, 'C' rank, 7 indexpoints from dual
7 union all
8 select to_date('10/20/2005','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
9 union all
10 select to_date('11/11/2005','mm/dd/yyyy') occdate, null part, 'C' rank, 4 indexpoints from dual
11 union all
12 select to_date('11/18/2005','mm/dd/yyyy') occdate, 'B3661-RYPX-A000' part, 'R' rank, 0 indexpoints from dual
13 union all
14 select to_date('01/11/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
15 union all
16 select to_date('01/25/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
17 union all
18 select to_date('01/27/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
19 union all
20 select to_date('02/15/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'C' rank, 4 indexpoints from dual
21 union all
22 select to_date('03/07/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
23 union all
24 select to_date('03/14/2006','mm/dd/yyyy') occdate, 'B3661-RYP-A000' part, 'C' rank, 4 indexpoints from dual
25 union all
26 select to_date('03/15/2006','mm/dd/yyyy') occdate, '3511-RNA0-0111' part, 'B' rank, 13 indexpoints from dual)
27 select qa.yr, qa.mn,
28 decode(qa.rank,lk.rank,qa.rank,lk.rank) rank,
29 sum(decode(qa.rank,lk.rank,qa.cnt,0)) cnt
30 from (select to_char(qo.occdate,'YY') as yr,
31 to_char(qo.occdate,'MM') as mn,
32 qo.rank,
33 count(qo.occdate) cnt
34 from qa_occ qo
35 group by to_char(qo.occdate,'YY'),
36 to_char(qo.occdate,'MM'),
37 qo.rank) qa,
38 (select 'B' rank from dual
39 union all
40 select 'C' rank from dual
41 union all
42 select 'R' rank from dual) lk
43 group by qa.yr, qa.mn, decode(qa.rank,lk.rank,qa.rank,lk.rank)
44 order by qa.yr, qa.mn, decode(qa.rank,lk.rank,qa.rank,lk.rank);
YR MN R CNT
05 09 B 0
05 09 C 2
05 09 R 0
05 10 B 0
05 10 C 2
05 10 R 0
05 11 B 0
05 11 C 1
05 11 R 1
06 01 B 0
06 01 C 3
06 01 R 0
06 02 B 0
06 02 C 1
06 02 R 0
06 03 B 1
06 03 C 2
06 03 R 0
18 rows selected.
SQL> -
Get rowns that don't exist in any of the tables.
Hi,
I need to implement some views to compare systems.
This views will compare tables with the same structure and I want to extract the rows that don’t exist in any of the sides.
I need to implement some views to compare only two tables, others to compare 3 tables and one to compare 5 tables and another to compare 10 tables!
Each table can contains from a few rows up to 10 million rows (that was the biggest count I found for this tables).
My test scenario:
CREATE TABLE TEST_TABLE
(COL1 NUMBER ,
COL2 CHAR(25));
CREATE TABLE TEST_TABLE2
(COL1 NUMBER ,
COL2 CHAR(25));
CREATE TABLE TEST_TABLE3
(COL1 NUMBER ,
COL2 CHAR(25));
insert into TEST_TABLE (COL1,COL2) values (1,'2');
insert into TEST_TABLE (COL1,COL2) values (11,'t1');
insert into TEST_TABLE2 (COL1,COL2) values (1,'2');
insert into TEST_TABLE2 (COL1,COL2) values (22,'t2');
insert into TEST_TABLE3 (COL1,COL2) values (1,'2');
insert into TEST_TABLE3 (COL1,COL2) values (33,'t3');To find the differences between two tables I implemented the following:
select * from
(select * from TEST_TABLE
minus
select * from TEST_TABLE2
union all
(select * from TEST_TABLE2
minus
select * from TEST_TABLE
Result:
COL1 COL2
11 t1
22 t2 For the 3 tables comparison The result should be:
Result:
COL1 COL2
11 t1
22 t2
33 t3 For the other ones I can implement the same way, but for sure this is not the prettiest and most performing solution!
How can I achieve the result I intent with the most performance?
Thanks,
Ricardo TomásYou didn't say if you allow duplicates in your tables, so i assumed you didn't.
If a single table could have multiple occurrences of a given col1, col2 combination you would need to distinct the col1,col2 list from each table before doing the union all.
ME_XE? select
2 col1, col2
3 from
4 (
5 select col1, col2 from test_table
6 union all
7 select col1, col2 from test_table2
8 union all
9 select col1, col2 from test_table3
10 )
11 group by
12 col1, col2
13 having count(*) = 1;
COL1 COL2
33 t3
22 t2
11 t1
3 rows selected.
Elapsed: 00:00:00.01
ME_XE? -
How to stop iphoto from recovering photos that don't exist?
I just bought my iMac and transferred all my photos from my backup drive to the iphoto library. In organizing my photos I must have deleted photos or had some corrupted photos in the transfer. Now, every time I open iphoto is says it has recovered 75 or so photos, creates a folder for them, but it's empty. How do I stop it from trying to recovery photos that don't exist? I've searched and have found nothing. The folder generated by iphoto as a recovered folder is empty...
Welcome to the Apple Discussions.
Can you give me an idea of why this type of error occurred
Because of a minor glitch when iPhoto failed to clean up after an import.
why has this now corrected the error?
iPhoto should remove that Importing Folder at the end of the importing session. When you launched iPhoto again it saw the folder and (incorrectly) assumed there was an import in progress. Removing the folder means that iPhoto won't make that assumption.
There is no reason to assume that the problem wil recur.
Regards
TD -
On my Mac I use Entourage for my mail. How do I sync notes that I make on my iPad with this?
http://support.apple.com/kb/HT1670
Take a look at this link. -
Itunes wifi sync not working on windows 8!!
Does itunes wifi sync works on windows 8? Because i already have enabled wifi sunc but after i disconnect the cable from the ilhone it doesnt aloud me to do sync via wifi. Does anyone know how to make it work properly on windows 8?
Interesting. I still haven't had any problems with iTunes 10.7 under Windows 8 Pro, including adding music files purchased from a 3rd party source (Amazon) and buying an album through iTunes. iTunes successfully matched the Amazon-purchased MP3's, and I was able download the iTunes AAC's to replace them. The only thing not typical about my set-up that I can think of is that I have iTunes installed on my B: drive--both the program files and the iTunes Media folder--not on my C: drive (an SSD). My library sounds about the same size as yours (~4,000 songs).
(My only Windows 8 problem has been with DVD playback and the Windows 8 Store Netflix and Hulu apps. It looks like the new AMD graphics card drivers don't seem to be passing HDCP tests under Windows 8. There are simple work-arounds--watching Netflix or Hulu in a web browser--so at this point, I'm just waiting.)
Good luck with your iTunes issues.
John -
ITunes bug - Sync not working, not recognising free space on iPhone
After doing the latest iTunes update, I went to sync my iPhone 5 and got this error message, "The iPhone "X" cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 3.24 GB required)."
However, I have 23GB left of free space, and there is nowhere near that amount of content to sync. It appears as though its not recognising the free space. I think it could be a bug in the latest iTunes update. Anyone had the same issue? Know of any fixes?I'm not sure I understand what you mean. You said that you have 23 gigs left of space, but that you're trying to sync over 38 GB? Can you give me a separate number of how much space is currently being used on the phone and how much information it says will be on the phone once you've synced? that's the number that it gives you in the capacity bar before you hit 'apply'
-
Import photos that don't exist...
When I import pictures into iPhoto from an external hard drive, there are mystery pictures that are showing up. These are pictures that used to exist on the HD but that I deleted from there.
I deleted my entire iPhoto library and emptied the trash within iPhoto. I then went to the "show package contents" of my iPhoto library on my computer's HD and deleted everything.
I tried to re-import the pictures from the external HD to iPhoto, but AGAIN, the mystery pictures are there. I've checked the folder in the HD that they are showing up in. But, they are not there. I've even done a search on my computer, and the files don't exist.
Please help me figure out why this is happening. I just don't know how to get rid of these pictures. I want them gone...completely!!!
Thank you!!!I then went to the "show package contents" of my iPhoto library on my computer's HD and deleted everything.
Never make changes to the structure or content of the iPhoto library using the finder
make sure you have the photos you want safe and drag the baad iPhoto library to the trash and empty it and then depress the option key and launch iPhoto and create anew library - now start using this correctly set up library
LN -
'Raw' Data XMP view shows internal properties that don't exist in the data
In FileInfo view for an image, if I switch to the 'Raw Data' tab, it shows photoshop:ColorMode and photoshop:ICCProfile. However, when I check the actual XMP data of the image e.g. using exiftool or a text editor, these properties do not exist in the XMP data.
According to this thread: http://forums.adobe.com/message/5057589 these are both internal properties to PS / Bridge, which explains why they don't exist in the XMP. But why are they shown in the 'Raw' data view for the XMP then? Showing them here is just confusing as it makes it seem like they should exist in the XMP data.
I can't really see any point in including nonexistent tags in the Raw Data view. But if it is deemed necessary, how about highlighting them a different color, such as using a grey font instead of black? At least it would indicate that they were different to the real data.
P.S. This is with Bridge CS5, possibly the issue has been fixed in CS6?Hi Paul
The issue is that the Bridge File Info panel is showing these tags in the XMP for the image, but if you check the XMP of the file, those tags aren't there.
As a side issue, Bridge File Info panel is also showing the XMP in a different structure to that which exists in the actual file. There are two issues here really
ACR is not writing the photoshop:ColorMode tag (or the photoshop:ICCProfile tag) to the JPEG (I checked the .xmp sidecar file for the RAW file and the photoshop:ColorMode tag does exist in there, but does not exist in the JPEG file converted through ACR).
Bridge's File Info panel is showing data in the XMP that is not actually there.
Although I would like the ColorMode tag added to the image, I don't think point 1 is a real issue, since the ICC profile is embedded okay. Point 2 does appear to be a bug (or at least it is confusing if it is intended behaviour). -
IPhoto album sync not properly done
Hi,
I have some problem when syncing my iPhoto albums, they won't sync properly, as in an album, i've some pict of the library that shouldn't be in the album (as they are not in the album on the computer).
I try delete all albums on the iPhone4, trying to sync back and still the same problem.
any help ?
fredI have the same problem.
Have a MacBook Pro (Snow Leopard)
Use iPhoto for my photos.
Use iTunes to Sync.
Mosly my iTunes syncs selected albums/events without any problems.
But a few of my albums/events won't sync. Or the albums/events syncs, but only one or two photos.
iTunes simply doesn't see, that there is photos in the selected albums/events.
It sometimes helps to make a new event, and put the photos from old even into new one.
But this time, nothing I do helps.
Really boring.
It's like there is a communication error between iPhoto and iTunes. -
Itunes wifi sync not working for iPhone 4s ?
i have a MBP 15'' , 3 iPhone 4s , 1 iPad 3 but only MY iphone 4s is not syncing over wifi , it syncs via usb cable but not when i connect to charger and connected to wifi or even when i press the itunes wifi sync in the settings it syas looking for MBP and does not sync , whereas all my other gadgets like ipad and iphones automatically sync as soon as they are in wifi zone . i tried everything like reeboting my iphone and quitting and reopening my itunes but nothing helped checked and unchecked the "sync with this iphone over wifi" several times still nothing then even tried changing the ip address but no , then even restored my iphone from backup even then nothing helped , and even did all the obvious things like connected bluethooth , used iphone remort for itunes , and even did homesharing of itune library through iphone , nothing helped so if anyone knows how to get this straight please let me know .. and yes i even checked the iphone and itunes version they are both up to date
hey kasey, i dont know why you have to do that or why does it not work even with all the right settings but what i know is after that process that i just explained above your problem will be gone and iphone will wifi sync as soon as you enter the wifi zone
the cause of the problem might be ( what i think is ) when you update you iphone software directly from iphone instead through your computer you get this problem because for me also it was working finely until i updated to 5.1.1 from iphone itself and wich caused me so much trouble, well now i have installed IOS6 and working great .evean if you did not update your iphone and still got this problem can be due to the reason that sometimes your iphone or computer cahnges some internet settings on theri on for their best connection which might cause confusion between 2 gadgets . -
Any photo sync apps that don't wipe out outlook contact photos?
My primary contact list is on my exchange mailbox.
If I take a picture on my phone and assign it to a contact the photo properly syncronizes to my exchange contacts in a few moments; however all of the photo syncing tools like Sync.Me that I've used do not populate the outlook contact photos.
There used to be a product to synchronize facebook contact photos directly to exchange, however since outlook started supporting the facebook social connector the developer pulled the tool from the web. The shortcoming of the facebook / linked in social connector is that it does not populate the photos in the contacts. It just dynamically shows the current facebook/linkedin photo when reading emails in outlook.
So Sync.Me doesn't send contact photos to exchange, and outlook social connector does not download the pictures to contacts which means they don't show up on the phone.
Worse than that, if you use something like Sync.Me it actually erases the photo from the outlook contact.
Does anyone use iphone with exchange and have a solution that works both ways?Is there any news on the matter?
Man thanks.
Maybe you are looking for
-
I downloaded the new software (ios 6) for the iphone 4s and my screen went black. I cannot use my phone at all. my phone rings, but I cannot answer it either. what should I do?
-
How to make pl/sql procedure not auto-commit?
I wish to be able to execute a create statement, and then rollback if there is a problem with any sql that follows. It seems that you cannot rollback? Why is this? (My problem is that I wish to execute a series of sql statements and run a rollback if
-
Authoring to DVD w playback monitor capable of HD, Sequence settings?
Hello Macaroonies, As the subject line reads, I'm working on a project w a final output for playback on DVD hooked up to a HDTV ready 16:9 monitor. I'm working in the sequence setting preset NTSC 3:2 (720x480) and plan on converting the finished edit
-
Flex 4 VideoPlayer captioning and horizontal VolumeBar?
I need to make a horizontal VolumeBar that looks like bars or just a rectangle and clicking on it would cover that rectangle with another rectangle to display the total volume, is that possible to make with the horizontal slider, or maybe it requires
-
Is design view missing from RoboHelp's new Find and Replace editor?
I just started using RoboHelp 10 and was excited about the new Find and Replace feature. However, it seems to force the user to edit in the HTML editor (which is very difficult when the topic has tables). Am I missing some preference setting? The onl