ITunes issues between Mac and Windows (31 character limit)

Hi all,
I'm in quite of a pickel and have not figured out a solution yet.
I am sharing an iTunes library via Dropbox with someone. I am on a iMac running Lion, and the other person is working on Windows XP.
That person is in charge of typing the metadata for some freshly imported albums.
Everything seems to be working fine besides one crucial point : when I open up the library on my end, I notice that all songs who's names contain more than 31 character are truncated - and not only the names are truncated but also are the wave extensions - so basically I can't even read the audio files from the library nor from the folder containing the audio.
The weird thing is that I often work with this person for entering my album's metadata but we used to work by sending hard drives. This works just fine so apparently it is not just a OS incompatibility issue - it's more of a dropbox-related problem.
Thanks in advance for any help you can provide.
Rob

What happenes when you try?
Error message?
What does it say?

Similar Messages

  • ITunes sharing between Mac and PC is not working

    iTunes sharing between Mac and PC is not working. No shared music appears.
    PC = Win XP SP3; 192.168.1.101
    iTunes for Windows 6.0.4.2
    Sharing enabled / Look for shared music enabled / Share entire library
    Open and running on PC
    Windows firewall has exceptions set to allow traffic on TCP 3689, UDP 5353
    MAC = OS X 10.4.6; 192.168.1.100
    iTunes for OS X 6.0.4(3)
    Sharing enabled / Look for shared music enabled / Share entire library
    Open and running on Mac
    System Preferences | Sharing | Services
    Personal file sharing - ON
    Windows file sharing - ON
    Printer sharing - ON
    System Preferences | Sharing | Firewall
    Personal file sharing - ON
    Windows file sharing - ON
    Printer sharing - ON
    iTunes Music Sharing - ON (i.e., TCP 3689 open)
    iPhoto Bonjour Sharing - ON
    Network Time - ON
    ROUTER = Linksys BEFSR41v4; Firmware 1.04.01; 192.168.1.1
    Functioning as DHCP server
    File sharing between Mac & PC works OK
    BUT iTUNES MUSIC SHARING DOES NOT WORK IN EITHER DIRECTION
    Shared music is not visible
    Tried turning both firewalls OFF -- still nothing
    Tried installing Bonjour for Windows -- still nothing
    ANY suggestions? Please help. Thanks.
    1.8 GHz PowerPC G5   Mac OS X (10.4.6)  

    Hi cbafiero,
    It seems that the problem lies in your router. I'm not sure exactly what the issue is (I've just now discovered it myself), but after switching from a Linksys WRT54GX2 to a thrift store Netgear, my shared libraries appeared instantly. My gut is telling me that the Linksys routers are blocking the multicast traffic, which is stupid on Linksys's part, to filter traffic internally. I'll look more into the Netgear and see what it has that the Linksys doesn't (or vice versa).

  • Help: symbol shifting between mac and windows, flash cs3

    I'm doing work reviewing flash files created by other users
    on mac and windows. I'm using os x 10.5.6. When I open a file
    created in windows / flash cs3 some symbols on the stage will have
    shifted upwards on the y axis. If I correct the shift and then send
    it back to the windows user they see the symbols incorrectly
    aligned, as if I had moved symbols around on a correctly aligned
    file.
    The strange thing is not everything on the stage is shifted.
    Only particular symbols will move, and it's usually symbols only
    (not text frames, drawing objects, etc).
    I believe there's a general history of bad behavior when
    saving flash files and trading them back and forth between mac and
    windows, but does anyone know what may be causing this? Or a
    remedy?
    Thank you in advance.
    Peter

    also, I tried opening the same files in vista using a mac
    mini with vista installed on a bootcamp partition. When opening
    other windows authored flash files there I had shifting issues as
    well, so I'm not convinced it's strictly a mac vs. windows issue.
    Unless it's a flash cs3 on windows xp doesn't like mac flash cs3
    and vista flash cs3...

  • File transfer between Mac and Windows

    I am running Windows on my Mac and I transfer files between mac and Windows alot using my external hard drive. I was wondering if there was an easier way to do this than having to use my external hard drive like a networking solution or something. Thanks...

    i also run windows on my mac (for work). The issue i had was that when booted in osx, i could see the windows partition, and copy files FROM it to the mac side, but i could not copy files TO the windows partition.
    As i understand it, this is because the apple NTFS driver (to read the windows partition) only allows read access (not read and write access). It was easily solved with MacFuse (which is an open source way to add different disk file systems to your mac, kind of like teaching it a new language), and NTFS-3G for mac osx.
    http://macntfs-3g.blogspot.com/
    scroll down a bit for the download link. The installer will put in MacFuse and NTFS-3G, so it's the only one you need.
    After a reboot, i can read/write to the windows partition while booted into macosx (and it's free).
    i hope that helps.
    p.s. the efi boot manager download is NOT required.

  • Syncing between mac and windows

    I have an issue where I have created files in Adobe Draw (and previously in Ideas) which I have then saved to the Creative Cloud. I open these files in Illustrator on my Mac, save them back to the cloud then open them on a Windows PC. When I save these files on the PC, I get the Unable to Sync Files error message. I have gone through these solutions Error: "Unable to sync files" but no solution applies. If I create a file on my PC, it syncs fine. Is there a known issue when sharing files between Mac and Windows? I can save the files to Dropbox or email them and I don't have this issue. Thanks

    Hello,
    Would you be able to send me your log files so I can better see what might be causing this issue issue. I will need Logs from both your Mac and Windows machines please.
    You can find your log files at...
    Mac:
    /Users/<username>/Library/Application Support/Adobe/CoreSync
    Windows:
    C:\Users\<username>\AppData\Roaming\Adobe\CoreSync
    'Library' on Mac and 'AppData' on Windows are both hidden folders. Please read these pages for help on showing these folders:
    http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html (Win)
    https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html (Mac)
    please upload them to Creative Cloud and send me a link to the logs at [email protected]
    Thanks
    Warner

  • Share files between Mac and Windows in same iMac with boot camp

    Hello,
    I am new in using Mac and recently I buy a IMac 24" model.
    I used to use PC a long time with a lot of old document.
    I want to install Windows XP with boot camp.
    But I also want to share my documents, music, video files between Mac and Windows in same iMac.
    How can I do this?
    Thanks in advance,
    Eric

    Hi Eric and welcome to Discussions and the Apple world.
    Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
    However with FAT32 you are limited to a partition size of 32GB.
    Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
    Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
    Regards
    Stefan

  • Transferring keyboard shortcuts between Mac and Windows

    I need to migrate users from Mac (CS 5.5) to Windows 7 (CS 6). I have tried to transfer a user's custom keyboard shortcut set by copying the .indk file to the appropriate folder on the PC, and although it shows up in the list, when I try to select the set I get an error saying it is in the wrong format or the file could be damaged. Is there a way of transferring keyboard shortcuts between Mac and Windows?

    Shortcut sets seem to be human-readable text files, so you could try making a copy and doing some editing, changing cmd to ctrl and opt to alt, and change the platform value in the first line to "win" though I can't make any promise it will work.
    There are also some known problems trying to migrate legacy sets into newer versions of ID since CS5, I think.

  • How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

    How to prevent iTunes for Windows from "Updating iTunes Library"?
    My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
    Thanks for any help/suggestions.

    Connect the PC to the library on the NAS. Wait while "updated".
    Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
    Close iTunes on the PC. Do not open iTunes on the Mac.
    Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
    Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
    The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
    Open iTunes on the Mac. It will update again, but that should be last time.
    tt2

  • Has anyone tried home sharing between mac and windows using parallels on the same machine?

    I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

    In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

  • Sharing iTunes Library between Mac and PC

    Hello
    I have a Windows PC at home and had a Dell laptop. I have my itunes library on an external hard drive. This worked perfectly since which ever machine I was on I had access to the same library. Recently my work upgraded my laptop to a Mac Book Pro with Snow Leopard. Is there a way to share this same library on my Mac? I am new to the Mac world and am a bit lost. Thanks in advance

    I have a similar setup. You need to move your itunes library to your network storage device. You need to do this within itunes (you will have to google moving your itunes library because I don't remember all the steps). After you moved the itunes library to a network share, you need to go into advanced preferences on each computer that will access the library and set the location of the itune library to point to the network share folder where the file itunes library.itl is located - the exit from Itunes. Restart Itunes on each computer (pressing shift on the Windows computers and option on the Macs). You will then have to choose the Itunes library. Browse to the network share and click on the itunes library.itl folder.
    Three notes. Only one computer at a time can access the library. Second, each time you switch back and forth between mac and pc, the library folder needs to be updated. Third, for some reason, with iTunes 9.0.2, the updating process has slowed down. It is especially slow taking 15 minutes or so for a 13GB library. Hope apple fixes this.

  • 1 hd with 2 file formats for use between mac and windows?

    Think this is the right forum...
    I want to instal a program onto an external hard drive for use on both mac and windows. The program supports both mac and windows.
    My plan is to get an external hd and partition it in half. One half i will format mac os extended and the other i will format ntfs. I'll instal the mac version on the mac partition and the windows version on the ntfs partition.
    This should work i'm thinking, yes? I.e. when i plug it into windows it'll run the windows installation no problem and when i plug it into the mac it'll run the mac installation no problem?
    Thanks.

    An easier solution might be to just connect the drive to a Windows PC and format it as FAT32. Both Windows (98 and higher) as well as Mac allow full read/write access to FAT32 formatted drives. No need to download any drivers, etc. It just works.
    Yes, this solution is not perfect, but none are. The free NTFS drivers for Mac are not most efficient drivers for speed/performance, the HFS+ drivers for Windows are not cheap, and have their own performance issues, and FAT32 has the limit of file sizes over 2GB (or is it 4GB now?) not supported. No one solution is perfect, but for the many one is better than the others, but it all depends upon their circumstances which is "better".

  • HT1452 I want to reset the permissions on a western digital external hard drive to work between mac and windows... How can I do this easily?

    I have a MacBook Pro and have recently bought a Western Digital external hard drive.  I used it on my windows laptop first and unfortunately now on the Mac it is read only.  How can I set it so that I can use it successfully between the both the Mac and windows laptop?
    Thanks

    MacQuack wrote:
    You will need to pull all the information off first. The formatting will erase it all.
    Use Disk Utility (in Applications >> Utilities or use Spotlight to find it). On the left select your WD drive and then select the Erase tab. Where it says Format, select exFat in the drop-down menu. Next, click Erase and done. It will take approx. 5-15mins to re-format.
    Cons: You will be unable to store files 4GB or larger in this format (usually only dmg/iso files or large Outlook files). Also, you will be unable to use Time Machine or other auto-backup programs.
    That is not entirely correct, there is no 4G limit using exFat, FAT32 is the one with the limit.

  • Firewire between Mac and Windows

    Hi,
    I'm having some problems to connect Windows 7 and Mac OS X (10.6.5) with firewire.
    I've installed ubcore drivers (from unibrain) on windows to have firewire network drivers.
    The network works perfectly between Windows and bootcamp, between Mac and Linux, and in target mode between the MBP and windows. But i've got an error when i try to connect Windows and Mac.
    Windows seems to have a new hardware connected, and is searching for drivers that it doesn't find, and Mac gives me an error :
    ERROR: FireWire (OHCI) Lucent ID 5901 built-in: handleUnrecoverableErrorInt.
    It seems like Mac is not mounting a network connection over the firewire, but something else.
    Is there a way to force network mode for firewire ? Or is the problem somewhere else ?

    So, i've got my answer.
    You can't use firewire between Mac OS X 10.6.5 and Win7. Unibrain doesn't support it, and i can't find any other way to make it work...so you just can't.
    So sad :'(

  • Switching between Mac and Windows platforms

    Hi there
    Are there any problems with using an external hard drive and moving back and forth between a Mac and a Windows PC? I'm mainly using MS Office documents but am concerned that they might corrupt if I switch back and forth betwen Mac and Windows.
    Any pointers or suggestions?
    Cheers

    Hi Sharif,
    Thanks for your answer. If I could just ask for some clarification
    Sure thing, tht's why we are here, aren't we ?
    If I buy a new external drive, should I then use Disk Utility to format it according to the guidelines you've given?
    1. Start Disk Utility
    2. In the left pane click on the external harddisk
    3. Click on the 'Partition'-Tab in the right pane
    4. Choose 'One Partition'
    5. Choose 'MS-DOS' and enter a "Name"
    6. Click on the 'Options'-Button and set MBR as partition scheme
    7. run the partitioning
    And in doing so, this will make the drive stable across platforms?
    Has worked for me on a number of external harddisks.
    Although I personally share the hatters opinion about NTFS being the better file system.
    But as said you have to use a third-party helper in OSX to write to NTFS harddisks.
    Regards
    Stefan

  • Nano as a flash drive between Mac and windows

    I intended to use the nano as a flash drive. I use Apple at home, but have to use windows at work. My other flash drives have no problem moving files between both. But when I connected the nano at work, Windows gave me some initialize message. Would that delete my data on nano? I just disconnected and wait for your help.
    How can I use the nano as a flash drive between my mac and windows at work?

    Check what the iPod's format is; if the iPod nano is in Mac format, it can't be used on a PC which doesn't have third-party software such as MacDrive installed onto it. Initializing or restoring your iPod will erase everything on it.
    (8873)

Maybe you are looking for