Itunes just won't start after the upgrade

I've upgraded my itunes, and done all the double checks I've found on this site. My itunes just will not start after the upgrade. It's frustrating to say the least because I can't even access my libary or edit my ipod. I've tried everything including uninstalling and reinstalling.. please help! I wanted to put my audio books on my ipod for a roadtrip tomorrow!

Thanks Katrina. I was able to find what I needed through the link that you provided.
To those that are having this problem, here's what I did to fix this issue:
+If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
+1. Open AirPort Utility.+
+2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
+3. Select the specific firmware version you require.+
+4. Click Download.+
+5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
+6. Choose Base Station > Upload Firmware.+
+7. Select a firmware version and click OK.+
+An important note about installing firmware+
+After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
http://support.apple.com/kb/HT1218
I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

Similar Messages

Very frustrated with my LG G2. My screen freezes all the time when texting. This started after the upgrade. My husband's phone is doing the same thing. We have reset the phones, deleted off pics and videos but nothing helps.

Very disappointed in my LG G2. My screen freezes all the time especially when texting. This started after the update. My husband's phone is doing the same thing. We have done a hard reset, deleted pics and videos to clean up the phone but nothing helps. Any suggestions? Our phones are new.

Lots of Frustration. In some cases the LGG2 is rendered useless even as a phone.
Here is what I did.
Got replacement Phone.
Same problems but I shut down all apps that I purchased even though they worked before KitKat.
Found that If I have both WiFi and LTE Data on at the same time battery chewing stops. Do Not know why.
Then I got 2 CM free utilities. The Clean and Wash utilities. Run them and find the culprits grinding CPU
cycles and running down the battery. Number One is the Verizon Voice Mail service constantly turning on and off
and retrieving data not there. Turn of the extra Voice mail and use the old access with the *6. Unless you have
100 messages a day for business your hosed until this KitKat issue is fixed. Get the CM battery utility.
YOU can see the battery suckers and shut them down when not using automatically.
Start putting back one application at a time you used often and see it they work and if the utilities will tune them
down if they cause problems. The LG will get better but with some limitations.
LG and Verizon have a problem with what was a great phone.turned bad overnight.
whatmorecanyousay

My itunes won't start after the latest update, it says, "itunes.exe bad image

After I installed the lastest itunes and went to start itunes, I got an error: itunes.exe bad image. and inside the error box said, " C:\Windows\system32\dssenh.dll is either not designed to run on windows or it contains an error. Try installiing the progam again using the original installation media or contact yoour system administrator or the software vendor for support."
What to do? I have tried uninstalling it and reinstalling it numerous times. HELP!!

many thanks.
Let's try an sfc /scannow. On a Windows 7 system, see the instructions from the following document:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

WCS won't start after Linux Upgrade

Hi,
I've just upgrade RH to v5.0 and it all seemed to go fine except WCS won't start. I was running v5.0.56.0 on RH v4.0 (I know it's not supported) on a WLSE appliance, which ironically seemed to be fine. Now I get this....
Database server is running
Apache server is stopped
WCS is registered, but not initialized.
The Server seems to be unavailable. The possible reasons are
1. The server is not running yet.
2. The server is hanging.
3 The server has crashed.
If the server has crashed or is hanging
Please report the issue and follow the instructions to restart it.
1. Run StopWCS to stop all WCS processes.
2. Run StartWCS to start the WCS server.
3. If the server still fails to start, or you still get this
message, then reboot the machine.
Any suggestions will be most welcome.
Thanks
Scott

Hi Lucien,
Thanks for the suggestions - unfortunately I can't get dbadmin to do anything;
[root@nlcwcs1 bin]# dbadmin ?
-bash: dbadmin: command not found
[root@nlcwcs1 bin]# DBAdmin ?
-bash: DBAdmin: command not found
[root@nlcwcs1 bin]# dbadmin.sh
-bash: dbadmin.sh: command not found
[root@nlcwcs1 bin]#
Am I in the right directory?
[root@nlcwcs1 WCS5.0.56.0]# cd bin
[root@nlcwcs1 bin]# dir
aclProtocol.sql upgrade_2.2_b.sql
Backup upgrade_2.2_c.sql
Backup.lax upgrade_3.0-3.1.sql
CVS upgrade_3.0_Beta1_Beta2.sql
DBAdmin upgrade_3.0_Beta2_Beta3.sql
DBAdmin.lax upgrade_3.1-3.2.sql
dbadmin.sh upgrade_3.2_Beta1_Beta2.sql
EULA.html upgrade_4.0_Beta1_Fcs.sql
If I am, can you tell me how to use these commands please?
Many Thanks
Scott

Mac Mini Won't Start after RAM upgrade

Hi, I just tried upgrading my RAM from 1GB to 2GB on my Intel Core Solo Mac Mini. When i hooked everything back up it wouldn't start up. So I replaced the original RAM and the same thing happened. I get to the gray apple screen with the gray spinning wheel and then it just shuts off. What could be my problem? Are their any solutions?

Welcome to Apple Discussions, though I suspect the circumstances could be better!
It's not unusual for 'bad RAM' to cause a system to fail to boot, but the disturbing feature of your problem is that when the previous memory is reinserted, the system continues to fail. What makes it worse is that you describe the system shutting off after failing to boot - that is not a common symptom of something simple like bad memory, and may mean that in the initial upgrade, something was damaged or dislodged, or not reconnected correctly.
I would open up the system again, and disassemble it sufficiently that you can reseat the original RAM which was working correctly prior to the upgrade, then check that everything is connected correctly internally, and the CPU heatsink is firmly attached. If that doesn't result in the system working, or at least in different symptoms such as being stuck on the grey screen but no longer shutting down, then I would look for an Apple store in the area and make an appointment at the genius bar for them to have a look - that would not bear a cost in the first instance for them to give their opinion.

Won't start after recent upgrade

Started the recent upgrade. A depiction of the apple tv and usb cable connected on one end to tv and other end pointing to iTunes icon then showed up on the tv screen. Let run overnight and still will not connect. I am pretty sure battery in remote is fine; remote was working fine before the upgrade.

The update has failed.
You need to connect to iTunes on a computer with a cable.
Using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

[BDB/OpenLDAP] OpenLDAP won't start after BDB upgrade

After upgrading to BDB 4.6.21-1, my OpenLDAP-server doesn't start anymore displaying some error about environment mismatch. When upgrading BDB I saw the message I needed to upgrade the database, but that didn't work because the environment versions were different. (I've been trying to get this sh!t running for over two hours, deleted the database files in the meantime so I can't reproduce the error anymore ..)
According to JGC in http://bbs.archlinux.org/viewtopic.php?id=31375, where somebody has a similar problem, the following should be 100% working:
1) /etc/rc.d/openldap stop
it is stopped, wouldn't even start after reboot
2) slapcat -l /root/ldif
I made backup yesterday using this method
3) pacman -S openldap
local version is up to date
4) rm /var/lib/openldap/data/* (though you could keep a backup of DB_CONFIG)
check
5) slapadd -l /root/ldif
bdb_back_initialize: BDB library version mismatch: expected Berkeley DB 4.6.19: (August 10, 2007), got Berkeley DB 4.6.21: (September 27, 2007)
backend_init: initialized for type "bdb"
slapadd: slap_init failed!
6) /etc/rc.d/openldap start
it doesn't start (Fail). Starting manually with debugging on level 255, I get the following:
[root@kitten openldap]# /usr/sbin/slapd -f /etc/openldap/slapd.conf -d 255
@(#) $OpenLDAP: slapd 2.3.38 (Sep 29 2007 14:38:33) $
tobias@T-POWA-LX:/home/tobias/Install/Arch/arch-cvs/extra/daemons/openldap/src/openldap-2.3.38/servers/slapd
daemon_init: <null>
daemon_init: listen on ldap:///
daemon_init: 1 listeners to open...
ldap_url_parse_ext(ldap:///)
daemon: IPv6 socket() failed errno=97 (Address family not supported by protocol)
daemon: listener initialized ldap:///
daemon_init: 2 listeners opened
slapd init: initiated server.
slap_sasl_init: initialized!
bdb_back_initialize: initialize BDB backend
bdb_back_initialize: BDB library version mismatch: expected Berkeley DB 4.6.19: (August 10, 2007), got Berkeley DB 4.6.21: (September 27, 2007)
backend_init: initialized for type "bdb"
slapd destroy: freeing system resources.
slapd stopped.
connections_destroy: nothing to destroy.
Any help appreciated, I really don't know what to do about this!

Someone opened a bug report for it already. Glad I'm not the only one with this problem http://bugs.archlinux.org/task/8311

CiscoWorks won't start after LMS upgrade 3.0 - 3.2 ERROR 502 Bad Gateway in Portal

I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.
The upgrade was successful, with no errors, and all services started.
Can anyone help, and check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.
I add the installation log file;
And tell them that after upgrading to 3.2, you carge the following patches:
LMS321-win-CSCtr77570-0.zip,
cm5.2.1-nt-CSCtw88763-1.0.zip,
lms3.2.1-win-CSCts95764-0.zip,
lms3.2.1-win-CSCts82530-0.zip
in that order.
He added the logs generated by the LMS services Tomcat and Apache

Hi,
Here are the various errors/warning I found while looking through the attached logs.
WARNING:The application that you are installing requires new tasks to be
WARNING:registered with ACS. If you have already registered this application
WARNING:with ACS from another server, you do not need to register it again.
WARNING:However if you re-register the application, you will lose any custom
WARNING:roles that you had created earlier for this application in ACS.
WARNING:Some features in ACS may not work correctly on Dual-stack servers.
Warning: System memory is less than the minimum requirement.This may affect performance.
Warning: Current swap space is less than the minimum requirement. This may affect performance.
WARNING: The available RAM is 4086 MB which is lesser than the required RAM of 4096 MB. User chose to continue the installation
WARNING: Domain Name is not found from TcpIp parameters, setting PX_FQDN same as PX_HOST
INFO: User Selected to Reboot the Machine
Installation Completed at 16:38:06
Nov 23, 2012 7:59:11 PM org.apache.tomcat.util.threads.ThreadPool$ControlRunnable run
SEVERE: Caught exception (java.lang.NoClassDefFoundError) executing org.apache.jk.common.ChannelSocket$SocketConnection@d888c7, terminating thread
[warn] RSA server certificate CommonName (CN) `LOND-CW-MDF-1' does NOT match server name!?
[Fri Nov 23 19:19:46 CST 2012] CMFX - fileLoc is \C:\PROGRA~1\CSCOpx\lib\classpath\md.properties
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort : ajpPort = 9009 and host =LOND-CW-MDF-1
Cookie value is invalid
LTGateway.run(): connection to LWMS failed, trying again, Nov 23 19:22:28
You have a BUNCH of the ChannelSocket$SocketConnection exceptions.
The next step for you:
Check the running processes via cmd line (pdshow -brief).
Check that all processes are running as expected. If they are then take a look at what is keeping ports open on your box (netstat -anob). From above, the reason may be an application occupying a port LMS needs. Also check the Windows error logs.
Check the following services, they should look like:
Ciscoworks ANI database engine :Manual
CiscoWorks Daemon Manager :Auto
CiscoWorks RME NG database :Manual
CiscoWorks Tomcat Servlet engine : Manual
CW VisiBroker Smart Agent :Manual
CiscoWorks Web Server :Manual
CWCS Cmf database engine :Manual
CWCS rsh/rcp service :Auto
CWCS syslog service :Auto
CWCS tftp service :Auto
DFM dfmEpm :Manual
DFM dfmFh :Manual
DFM dfmInv :Manual
4. Log in as the local Administrator (not Domain).
Stop daemons (net stop crmdmgtd)
CSCOpxMDC\Apache\perl ConfigSSL.pl -disable
CSCOpx\MDC\Apache\perl ConfigSSL.pl -enable (Answer when prompted)
navigate to ..\NMSROOT\setup\support
Execute resetCasuser.exe
Start Daemons (net start crmdmgtd) and wait 20 minutes.
Check if condition persists.
5. Check the output of ..\NMSROOT\MDC\Apache\bin>pdreg -l Apache
A couple other things:
Set the server name to be the server name with the domain as well.
Set the primary DNS suffix to match
Modify md.properties & Registry & set PX_FQDN to the above.
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
- HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\ResourceManager\CurrentVersion\Environment
Thanks.

New itunes 5 won't start after download

I downloaded iutnes 5 and now when I click on the desktop icon or the one in the start menu itunes won't start! I also downloaded Norton Internet Security recently so I don't know if that has anything to do with it. Can someone please offer a suggestion as to what I can do to start my itunes. I've wasted so many hours already trying to get it to work....Thanks

Yes, it could be you have "zombie" itunes in your tasks.
But I think it is more likely that some firewall/security software like "norton" is stopping net-enabled software from running. You could look at the task explorer to see if itunes is launching. I prefer the excellent, and free, process explorer from sysinternals.com. For one it is better at stopping zombie processes than task manager.
http://www.sysinternals.com/Utilities/ProcessExplorer.html
So if you don't see any "itunes" or "ipod" processes running then you need to see about enabling them in your "Norton Internet Security"

My iPad, purchased in Nov. 2012 won't start after the most recent IOS update, and it's fully charged. Any suggestions?

My iPad purchased in 11/2012 won't start since updating to the most recent IOS version in 3/2015.
It's fully charged but pressing the HOME button or SLEEP/WAKE button, individually or together doesn't have any effect.
Suggestions?

If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

CiscoWorks Web Server won't start after LMS upgrade 3.0 - 3.2

I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.
The upgrade was successful, with no errors, and all services started except "CiscoWorks Web Server" which has the following error.
Apache.exe: Syntax error on line 1025 of C:/Program Files/CSCOpx/MDC/Apache/conf/httpd.conf: Cannot load C:/Program Files/CSCOpx/MDC/Apache/modules/mod_ssl.so into server: The operating system cannot run %1.
Environment:
Windows 2003 SP2 Enterprise R2 32-bit, 8 GB RAM, HP BL460c Server
I suspect there is a problem with the precompiled apache installation?
I was wondering if someone could zip up a known-working C:/Program Files/CSCOpx/MDC/Apache folder for me from CiscoWorks LMS 3.2?
Or if someone has a patch or update to 3.2 to correct this? Or, where I can get LMS 3.1 instead of 3.2 if LMS 3.2 is buggy?
Or if there is some other solution? (even if it is a clean install... although I'd rather wait to see if someone can solve this a better way)

Do you have another application that might be loading Apache or OpenSSL on that same server?
Search for theses files and verify its located in CSCOpx\bin directory .
cwssleay32.dll
cwlibeay32.dll
If not, copy it from CSCOpx\setup\support directory to CSCOpx\bin directory and then restart the server.
Get the MDCSupportZip output from C:\Program Files\CSCOpx\MDC\bin\mdcsupport.exe file and upload it here.

ITunes Won't Start After Airport Upgrade

After running the latest upgrade to Airport Utility and upgrading the firmware on my Airport Extreme, I lost all access to my iTunes library that is housed on a Drobo attached to the Airport. When trying to start iTunes, I get error "13005".
I normally access my library from both a Windows XP/SP3 box and a MacBook. I have tried the following steps:
1) deleted genius.itdb and extras.itdb.
2) Repaired iTunes install.
3) Removed and reinstalled iTunes.
4) Plugged the Drobo directly into the Windows box (no airport or USB hub).
Still no love. I was able to rebuild my library via my MacBook, and I created a Windows XP user account which can successfully run iTunes and see the library once I rebuilt it. However my main XP account (with Admin access) still cannot start iTunes.
Any thoughts would be greatly appreciated. Thanks.
Fogbert

Thanks Katrina. I was able to find what I needed through the link that you provided.
To those that are having this problem, here's what I did to fix this issue:
+If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
+1. Open AirPort Utility.+
+2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
+3. Select the specific firmware version you require.+
+4. Click Download.+
+5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
+6. Choose Base Station > Upload Firmware.+
+7. Select a firmware version and click OK.+
+An important note about installing firmware+
+After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
http://support.apple.com/kb/HT1218
I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

IPad won't start after iOS7 upgrade and reset

Hi,
I have just tried to upgrade to iOS7 through WiFi. No luck. So I upgraded via iTunes. When it finally was finished, I tried to turn on my iPad, but it wouldn't. It gets stuck at the Apple logo with a loading bar just under it. I did a full reset on iTunes and I can only get to the loading bar (which won't load).. Any suggestions?

I was experiencing the same thing. This article worked for me, hopefully it will help you.
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
Hold both the home button and the wake/suspend button down at the same time. You should see the Apple logo appear on your screen after holding these buttons down a couple of seconds, which means your iPad is booting up and should be good to go in a few more seconds.

Apps won't start after iOS5 upgrade for ipad2

Hi, after upgrading my ipad with the latest iOS. when you clck on any apps..it starts and then minimize..when you double click on the home buttom..you will see the apps there. Please advice.

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
Otherwise have you tried closing all apps completely and then seeing if they work when you re-open them ? From the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Mpd won't start after recent upgrade

Hi!
After one of the last upgrades my mpd service does not start anymore.
● mpd.service - Music Player Daemon
Loaded: loaded (/usr/lib/systemd/system/mpd.service; enabled)
Active: failed (Result: exit-code) since Di 2014-09-30 10:21:04 CEST; 2s ago
Process: 1489 ExecStart=/usr/bin/mpd --no-daemon (code=exited, status=1/FAILURE)
Main PID: 1489 (code=exited, status=1/FAILURE)
Sep 30 10:21:04 lu10855 systemd[1]: Started Music Player Daemon.
Sep 30 10:21:04 lu10855 mpd[1489]: fatal_error: Failed to set group 92: Operation not permitted
Sep 30 10:21:04 lu10855 systemd[1]: mpd.service: main process exited, code=exited, status=1/FAILURE
Sep 30 10:21:04 lu10855 systemd[1]: Unit mpd.service entered failed state.
If I start mpd directly with mpd --no-daemon as root or via sudo it starts without any problems.
Group 92 is audio and the user mpd is part of that group. Do you have any ideas what is going wrong here?
Best Regards,
Robin
Last edited by jayasinghe (2014-09-30 08:43:43)

jayasinghe wrote:
Hi!
After one of the last upgrades my mpd service does not start anymore.
● mpd.service - Music Player Daemon
Loaded: loaded (/usr/lib/systemd/system/mpd.service; enabled)
Active: failed (Result: exit-code) since Di 2014-09-30 10:21:04 CEST; 2s ago
Process: 1489 ExecStart=/usr/bin/mpd --no-daemon (code=exited, status=1/FAILURE)
Main PID: 1489 (code=exited, status=1/FAILURE)
Sep 30 10:21:04 lu10855 systemd[1]: Started Music Player Daemon.
Sep 30 10:21:04 lu10855 mpd[1489]: fatal_error: Failed to set group 92: Operation not permitted
Sep 30 10:21:04 lu10855 systemd[1]: mpd.service: main process exited, code=exited, status=1/FAILURE
Sep 30 10:21:04 lu10855 systemd[1]: Unit mpd.service entered failed state.
If I start mpd directly with mpd --no-daemon as root or via sudo it starts without any problems.
Group 92 is audio and the user mpd is part of that group. Do you have any ideas what is going wrong here?
Best Regards,
Robin
Systemd now starts the service as the mpd user by default (see /usr/lib/systemd/system/mpd.service). You can restore the previous behaviour by creating /etc/systemd/system/mpd.service.d/user.conf with the following content:
[Service]
User=
(will run mpd as root, which then has the capabilities to su to another user)
Though I'd recommend that you just let systemd handle the permissions setting rather than mpd. Comment out the user/group declarations in your mpd.conf and change the User declaration to the user/uid you want. Add in a Group declaration if you want too, though I don't think running processes as the audio group is a Good Idea™.

Itunes just won't start after the upgrade

Similar Messages

Maybe you are looking for