Itunes keep saying my iphone5c needs to be restored. I reinstalled itunes and its up to date along with my phone which is working fine I just want to mess with apps and tones and no matter what I do it won't work. Works on different computes.
This is my first time posting EVER on apple and I can't seem to find a solution to this issue through google or these forums. My iphone 5c working perfectly fine suddenly when ever I connect it to my computer keeps saying it cannot connect that I need to restore my iphone. When I hook it up to other computers which have itunes it works just fine. I have removed itunes and hooked my phone back up to it and still I get this error. Is there something i'm missing or doing wrong? Everything is up to date on my computer and phone
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.
Similar Messages
-
My iTunes keeps saying that I need authorization but I'm already authorised.
Whenever I try to sync my iPod with my MacBook Pro in iTunes, it says that it needs authorization. The only Problem is that I'm already authorised. I keep authorising it until I can't stand it any longer. I have synced it to other computers and switched it from my old computer to this one. If you can help me, that will be great.
The following document might be worth a try with that one:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases -
Title pretty much sums it up. I'm getting very frustrated. I've tried turning off the compatability of my Quicktime, and nothing is changed. Can anyone figure out the problem? I can't find an answer anywhere.
Yea i got that same message to Quicktime failed to initialize (error-2096) Quicktime is required to run itunes.Please reinstall itunes, which i did so many times which did'nt work and so i started reading some of the articles on this site. there was one article i read which says right click on quicktimeplayer and click on properties then click compatibilty tab and deselect checkbox or boxes but i only deseleted one box which reads windows vista .windows 2000 or 95 or whatever so i did that opened up itunes again and still i got the same error message then i started thinkin i wonder if i should do the same thing on the itunes player click on properties, click compatibilty tab then deselect box so i did. Open up itunes hey hey presto it open up alrighty only problem i lost all my music but lucklie at backed them up on another hardrive, on my ipod & Cds...Hopefully this will help you out or anyone else...
-
I bought a new computer, and downloaded iTunes, therefore the new itunes doesn't have my music or anything on there. I want to get everything on my iPhone to my new computer/itunes. But no matter what I do, it won't let me. My desktop has everything that my phone has on it, I just want it all moved to my laptop. Does that make sense? I could really use some help. I don't live with this desktop anymore so I need to be able to use my laptops itunes. Please help me. Thanks in advance!
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2 -
I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.
iOS: Unable to update or restore
-
my itune keeps saying i need the 64 bit, ive followed the instructions on redownloading itunes, but its still not working.
Hello 19Brenda94
Start with removing iTunes in the order of the first article states, which is iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support (iTunes 9 or later). Once that is done, then download iTunes 64 bit version from the second link below and run that installer.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
iTunes 11.1.5 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Regards,
-Norm G. -
I'm trying to update my apps on my third generation Ipod but, I'm having some difficulty. I can't update my Ipod or apps via my laptop because it's broken. Itunes keeps saying that my security code for my card is wrong. I can't update my apps now or continue to play games. What do I do???
Perhaps this article can be of assistance.
iTunes Store: My credit card's security code or zip code does not match my bank's records
B-rock -
what can i do to sort my ipod touch 4th gen, when ever i connect it to my laptop my itunes keeps saying, and i quote "itunes could not connect to this ipod, an unknown error has occured" please helpppppp i have not had my ipod for long either
- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have restored my iphone 5 for the second time today, and it keeps crushing after 1hour of having completely restored it through iTunes. What am I supposed to do? I deleted some apps I had recently installed, even changed the background refresh. What else?
Well... it said iPhone Recovery Mode, and I pressed 'Restore iPhone' after which it asked me if I am sure that I want to restore the phone to factory settings, I pressed 'yes'. After 20-30min it eventually came to the 'Hello' page where I had to sign in with my Apple ID, and then saw the icons of each of my apps. which one by one turned from grey to their full colour as they downloaded one by one. After 1-2 hours of having completed all the app downloads, I found the phone shut and could not turn it on with the normal way. And this happened after 2 restore sessions. Is there something I need to do, or I need to request a replacement. I have had the phone for 11months, and crushing problems begun on the 13 of Nov, which was a few days after I updated to iOS7. But today is already 48hours since I have not been able to use my iPhone properly.
-
I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.
Maybe this will help:
Troubleshooting
As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data. -
Currently using Photoshop CS5, but with a replacement computer and upgrade to Yosemite, keep being told I need to install the legacy Java 6. Currently, Photoshop won't even open. I absolutely do not want to subscribe, don't want to mess with the cloud, just want to buy an upgrade to something that will run for a while longer. I don't care about Lightroom, Bridge, Illustrator, etc.; most of those I've deleted over the years. But I do use Photoshop - or would if it would still run. What options do I have?
This is the java you need for photoshop cs5 to work on mac os x 10.10 Yosemite
https://support.apple.com/kb/DL1572?locale=en_US
It's also possible you may have to reinstall photoshop cs5 even after installing the above java, because sometimes the upgrade to mac os x 10.10 messes up the photoshop cs5 installation.
You can download photoshop cs5 from here if you don't already have the install media.
https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html -
My new Macbook won't connect to my wifi network - it keeps saying "password incorrect" - but I've tested it on my phone and works fine, I've checked the password I enter is correct digit for digit - what could the problem be?
you need to open the keychain access located in your utilities folder in the applications and once in the keychain on the left side click on the words system at the top and in the lower section click on passwords
next look in the striped area for any passwords that say airport network password next to kind and highlight those and hit delete on the keyboard to remove them from the keychain.
once you remove all of these airport passwords, quit the keychain
turn wifi off then back on, select your wifi network from the list and enter the password telling it to save to keychain this should resolve your issue! -
iTunes keeps saying its the latest version. Ive downloaded a 4.3.5.ipsw but when I try and restore from this iTunes says the firmware isn't compatible...any idea's what to do next?
The iPod 3g will only support iOS up to 4.2.1 and nothing beyond that.
Allan -
My iTunes keeps saying "application is not responding". what do i do?
my iTunes keeps saying "application is not responding". what do i do?
Hello khairanihariri,
Welcome to the Apple Support Communities. if iTunes has become unresponsive, it is good to wait it out to see if it becomes responsive again. If it does not, then the next steps would be to preform a Force Quit on iTunes. The following article will assist with that process.
Mac OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/HT3411
To force quit an application, choose Force Quit from the Apple menu (or press Command-Option-Esc), then choose the unresponsive application in the Force Quit window, and click Force Quit.
Optionally, you may be able to Option-right click the application's icon in the Dock and choose Force Quit from the contextual menu.
Additionally, you can force quit the front-most application in Mac OS X v10.5 or later by pressing Command-Option-Shift-Esc for three seconds.
Regards,
-Norm G. -
My phone was working fine, then just went completely blank, and now is totally unresponsive
Plug it in to mains power for at least 15 minutes. If it doesn't automatically come on, try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Maybe you are looking for
-
Dbms_lob.copy vs. variable assignment
Cleanup of lob in java Scenerio. Java mid-tier application creates a CLOB variables to pass to Database PLSQL stored procedure One clob input, one output argument. Input clob variable setup with dbms_lob.createtemporary(a,true,dbms_lob.call); clob da
-
Hi ALL, 1)while creating the file in the FTP server i want the sender file adater to wait or lock from polling the file getting created and start picking the file once its completely crated. i am told that we need to write OS commends to handle this
-
Macbook Pro's Left Speaker problem
I bought MacBook Pro 13 inch i7 on friday and I noticed that when I play music the left speaker has some cracking noise in it. When I play my music over the right, there is no noise, but when I use both or just the left... there is some kind of noise
-
1st gen Touch w/3.0 now wireless is intermittant
Hello all, A side note. I've actually been on these discussion boards for years however today when I logged on to Apple Discussions a message said that my former name and info had been deleted "due to security reasons". I have no idea what the proble
-
HR master data change export with Interface-Toolbox PU12
Hello out there ! I implemented a HR master data change export with PU12 at one of my customers. It works fine - with one little problem: It is only possible to export one period (actual or selected). Is there any possibility to export more than one