Itunes library backup not working

I currently have a backup of my itunes library file as well as the itunes music. I lost the orginal xml file and when I open itunes, I get a blank database library. When I try to add to library, nothing happens.
Should I try something else to get the back up to take or do i need to import all the music into the library after I import the datafile?
Thanks
jf

Jeff hello,
Trash the iTunes Library file in your iTunes folder and put back the backup copy... check the name is correct 'iTunes Library'
Put all your backed up music in the iTunes Music folder.
Start iTunes and it should all work... as a check set the preferences > advanced > general tab NOT to copy any files when adding to Library and DO keep iTunes Music folder orgaized... OK any changes.
From the file menu select 'add to library' and choose the iTunes Music folder.
let's know how you get on Jeff ... TP
iMac 800MHz PowerPC G4 17 Flat Screen. G4 iBook.   Mac OS X (10.4.3)  

Similar Messages

  • ITunes Library Buttons Not Working

    I have been using iTunes for a long time and have never seen this issue before, but now, when I open itunes, I can not use any of the links / buttons under the Library section on the left. I can open the iTunes store and navigate around just find, but when I click on any of the Library buttons, it attempts to load something but nothing actually loads.
    For example, clicking on Music will load the Genius right sidebar (doesn't load the entire thing, but displays the gray box) but thats it. Nothing in the main area. When I click on Movies, I see the top tab buttons "Movies, Genre & Unwatched" but nothing in the body. Its like its completely hosed.
    I've gone about fully uninstalling iTunes (and I mean FULLY) and re-installing, but I get the exact same results. Any thoughts on this one?

    Jeff hello,
    Trash the iTunes Library file in your iTunes folder and put back the backup copy... check the name is correct 'iTunes Library'
    Put all your backed up music in the iTunes Music folder.
    Start iTunes and it should all work... as a check set the preferences > advanced > general tab NOT to copy any files when adding to Library and DO keep iTunes Music folder orgaized... OK any changes.
    From the file menu select 'add to library' and choose the iTunes Music folder.
    let's know how you get on Jeff ... TP
    iMac 800MHz PowerPC G4 17 Flat Screen. G4 iBook.   Mac OS X (10.4.3)  

  • Itunes mobilesync backup not working

    Before installing Mavericks I saved the itunes-mobilesync-backup folder (you know that with a long odd name) and after stepping up Mavericks moved back to the same folder but after starting the itunes it didnt seem to have my data, it is completely empty. Do you have any idea how I can restore my backup with this folder?

    Jeff hello,
    Trash the iTunes Library file in your iTunes folder and put back the backup copy... check the name is correct 'iTunes Library'
    Put all your backed up music in the iTunes Music folder.
    Start iTunes and it should all work... as a check set the preferences > advanced > general tab NOT to copy any files when adding to Library and DO keep iTunes Music folder orgaized... OK any changes.
    From the file menu select 'add to library' and choose the iTunes Music folder.
    let's know how you get on Jeff ... TP
    iMac 800MHz PowerPC G4 17 Flat Screen. G4 iBook.   Mac OS X (10.4.3)  

  • ITunes Library does not work after update 10.4

    After updating 2 days ago to Lion,yesterday i must update Itunes to 10.4.
    After updating Itunes 10.4 can not see my Itunes Library anymore on my Drobo(Ext HDD)
    I've try everything but it don't work anymore.
    Please help!!!

    Hi Michael, depending on which drobo you have, there are firmware updates you need to download from the drobo support site and install to your drobo, along with companion software on your new Lion system. You can probably do this from any mac that can see the drobo. Maybe even from Lion. For the first gen drobo (which I have) there's not yet a Lion firmware update.
    Drobo (the company) says it's working on Time Machine, which for many people is failing to play nice with Drobo after the Lion upgrade. So you may have to wait a little longer for full Time Machine readiness.
    Best of luck.
    http://support.drobo.com/app/answers/detail/a_id/602

  • Itunes 11 backup - not working

    Hi everybody
    Before updating an ipad app I'm trying to backup data to my macbook using itunes. (this is what the app developer recommends for this particular update)
    But the backup is not working and I don't what is happening.
    I am running Mountain Lion 10.8.2 and itunes 11 on my macbook.
    According to Apple support, I should be able to do this in iTunes 11:
    Transfer files from your iPod touch, iPhone, or iPad to your computer
                               Connect your iPod touch, iPhone, or iPad to your computer and select your device.                                                 
                               Click Apps.                       
                               Below File Sharing, from the list on the left, select the app on your device that you want to transfer a file from.                       
                               From the list on the right, select the file you want to transfer, and click “Save to.”                       
                               In the window that appears, select the destination where you want to save the file, and click Open.                       
    The file is saved to the selected destination on your computer.
    I have followed all these steps, however nothing seems to happen when i click Open.
    If I browse to the folder/destination that I had selected when I clicked Open, it is completely empty.
    In this case I had created a folder on my desktop to save the backup to.
    Can anyone offer me any suggestions?
    FWIW I am trying to save .fdb files - which I am unfamiliar with.
    Thanks.

    Hey guys, I had the same problem. I checked all three options:
    1/ Crossfade kept it at 10 as 12 wouldnt work)
    2/ Sound enhancer
    3/ Sound check
    Then I relaunched itunes and it now works. Hopefully it keeps working, and haopefully this helps you guys out also !

  • I want to transfer music from an old iphone to a new itunes library , but not working

    I want to transfer music from an old iphone to a new itunes but its not working

    If you backup with iTunes and you restored from the backup and the data are gone, then there is no where to retrieve them from unless you have another backup that contains those data.
    Launch iTunes on the computer and go to iTunes>Preferences>Devices. You will see a window with all of your backups listed in it.
    If you see a recent backup that you are certain contains the data that you need, recover deleted data from iPhone backup.
    If your note is gone from iCloud.com there is only a few ways to possibly recover it.
    The first things I would check is a iCloud Backup, a iTunes Backup, or a 3rd party email that may have contained the note. To restore from a iCloud or iTunes backup follow this link. This article explains how to restore a device from either back up.
    Note if you have backed up since the note went missing, you will not have the note on the backup. Make sure you do not back up if trying to restore from a back up as this will back up the content without the note.
    To get to the "Set up assistant" on an iOS device, you must go to Settings>General>Reset>Erase All Content and Settings. Once the phone restarts, you will be at the "Set up Assistant"

  • Add Files To iTunes Library is not working

    I unlocked several files put them on my desktop then added them to my iTunes library by going to File>Add to Library but after it clearly shows it's being imported and finished I then search the library for it but there's nothing there of that sort. I try searching for the folder name I imported and the names of the tracks but nothing. Any ideas? I'm using the latest Mac OS and ITunes.

    The headers on the problem tracks may be corrupted or nonstandard. This can happen with some MP3 conversion or import utilities, and iTunes is very picky about header. Try running your MP3s through this utility:
    Mp3 Validator Mac version
    It sometimes can fix the problem.
    Hope this helps.

  • Adding Movies or Pictures to iTunes Library Does not work. Why?

    I have been trying to add some of my movies from my hardrive (as well as pictures) and I have not been able to see them in my library. I have looked through all the subcategories including podcasts and music and others but I still don't see the files added to my library. Thus, I am not able to load them to my iPod Touch. I have also tried to convert the movies to other file extensions/formats but that makes no difference. What can I do to fix this? the iTunes I have is the latest version, I downloaded it two weeks ago from Apple.com.

    My movies are usually about low res at 700Mb max... I thought iTunes could support various file types though. I will try to convert them, but I should ask which file converter is best for that extension? I am not sure if the program I use is qualified enough to do more. I will look into that but what do you recommend?

  • ITunes DVD Backups not working

    I've tried backing up my purchased iTunes music onto DVD. I'm using DVD+RW discs, and the burn apparently completes ok, but when I insert the discs they don't mount, and when I verify them in Disk Utility I get the error Invalid B-tree node size. I've tried the 'Completely Erase' option in iTunes but it hasn't helped.

    Hmmm... RW discs can be iffy. Do you have problems when using them in other data burning modes? It is possible you a slower burn rate might help (if you can set that).

  • ITunes Library File Not Valid!  What the Heck?

    I have 11,500 songs in my music library and am running iTunes 7.0.2. My iTunes Library file from time-to-time becomes corrupted, on probably at least a weekly basis. I have no idea what's causing this.
    Here's the typical scenario ... iTunes works fine, I quit it, and the next time I open it it shows the dialogue box that says, "Importing 'iTunes Libray.xml'..." Then it organizes the files and a dialogue box indicates "iTunes Library" does not appear to be a valid iTunes Library file ... Renamed damaged file ..."
    When it's finally all done, I get my music library back minus all my playlists as well as EQ and volume settings.
    This happened today and my most recent backup (done earlier in the day) was also corrupted. This is why I've learned to keep a set of four recent backups just to insure I have a reliable and useable one not more than a couple of days old. But it seems a very unnecessary hassle and I'm always losing adjustments made to my database!
    Anyway ... would anyone among our distinquished and experienced iTunes geeks out there have a clue as to why this is happening OR any suggestions as to what I might do to help alleviate the problem?
    Is anyone aware of a program that will search for corrupted files within your music library? I suspect this might be part of the problem.
    Thanking you in advance for your help!
    PowerBook G4 17" | 80GB Video iPod   Mac OS X (10.4.5)  

    It seems like the ITL file is not being properly written after iTunes closes. Then when you re-open iTunes, it cannot load the ITL file and creates a new one. Forcing you to recreate your Library manually, again and again.
    Several things to check:
    -Double check to see that the ITL file or the folder it resides in is not read-only.
    -Using Windows Explorer, right-click on the file (or folder) name, go to Properties.
    -If it is, then close iTunes, change it, and reopen iTunes.
    See this thread to reset the iTunes preferences: http://discussions.apple.com/message.jspa?messageID=1216090#1216090
    And see this post to use TweakUI to check the location and validity of your My Music 'Special Folder': http://discussions.apple.com/click.jspa?searchID=487067&messageID=1197027
    Once the main cause of the inability to save the ITL file is corrected, you'll need to recreate your Library one last time to finally save it. No way to resurrect the original one, unless you had backup copies of the ITL file.

  • HT1751 After "Restoring iTunes Library Backup" it wont link to the files in the iTunes folder. I've followed the correct procedure, and iTunes lists all my music correctly (but with no artwork), but can't locate any of the files. Using Windows 7. Help ple

    After "Restoring iTunes Library backup" it wont link to the files in the iTunes folder. I've followed the procedure as described, and the iTunes folder is in the correct location. iTunes lists all my music correctly (albeit with no artwork), but can't locate any of the files.
    I've been restoring my iTunes folder from a backup hard drive to a new computer on which I've downloaded the latest iTunes (10.7). If this is a newer version than the one I backed up with could this be the problem? (I had the latest (to my knowledge) iTunes when I backed up the folder about 3 weeks ago, was this version 10.7?)
    Or is the version of iTunes (within recent updates) not an issue when restoring a library?
    Using Windows 7.
    Any help please?

    From the top of the page where the scripts live...
    The general method of use is to download the script to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist. Some scripts offer a choice of track by track confirmation of changes or fully automatic processing of the selection. Many of the scripts can optionally display a progress bar while running.
    You are strongly advised to backup your entire library, or at the very least the iTunes Library.itl file, before use. Test the behaviour of your chosen script on a small group of files first to make sure it does what you want before applying it to large numbers of files.
    Most builds of Windows will execute *.vbs scripts when you double-click them. If that doesn't happen then you might need to visit the Add/Remove Programs or Programs & Features control panel to enable the Windows Scripting Host. I can track down details if you have issues.
    Backing up and restoring data is an area that is often glossed over. Most people don't try to learn much about it until they've lost something important. (Me too )
    If your iTunes library was in the usual layout then normally copying the whole iTunes folder from the User's Music folder in the old computer to the User's Music folder in the new one will usually work fine. Ideally this is done before iTunes is installed so that there is no empty library to replace, and all settings are picked up from the old library. This post contains more details.
    tt2

  • ITunes Library.itl not valid music library file

    "iTunes Library.itl not valid music library file" I get this error almost everytime I restart my computer. When itunes makes the new ".itl" file, not all of my music is listed in the library. I have read through a large amount of the forum posts on this topic and have not found a solution that works for me yet.
    How can I stop iTunes from doing this everytime I restart my computer?
    Is there a way to "repair" the damaged ".itl" so that I do not have to keep remaking my playlists?
    iTunes 6.0.1.3   Windows XP  

    It seems like the ITL file is not being properly written after iTunes closes. Then when you re-open iTunes, it cannot load the ITL file and creates a new one. Forcing you to recreate your Library manually, again and again.
    Several things to check:
    -Double check to see that the ITL file or the folder it resides in is not read-only.
    -Using Windows Explorer, right-click on the file (or folder) name, go to Properties.
    -If it is, then close iTunes, change it, and reopen iTunes.
    See this thread to reset the iTunes preferences: http://discussions.apple.com/message.jspa?messageID=1216090#1216090
    And see this post to use TweakUI to check the location and validity of your My Music 'Special Folder': http://discussions.apple.com/click.jspa?searchID=487067&messageID=1197027
    Once the main cause of the inability to save the ITL file is corrected, you'll need to recreate your Library one last time to finally save it. No way to resurrect the original one, unless you had backup copies of the ITL file.

  • Some of the items in the itunes library were not copied to the ipad because they could not be found

    Hi All, problem with my ipad mini. When trying to copy music over I get the following "some of the items in the itunes library were not copied to the ipad because they could not be found". I reset the ipad, as new, not a backup copy, and managed to rectify the problem, right until I downloaded IOS 6.1.3, now the problem is back and the previous solution does not work. The songs can be easily transferred to my ipad and iphone, so they are no problems with the itunes library.

    The issue is in iTunes, not the iPad.
    In the itunes music library go to the songs that you miss, rightclick and choose "show in Finder", that results in "not found" and you have the option to locate (and "connect" them), if they are gone from your computer, you will have to restore them from a backup or TM.

  • ITunes shuffle is not working anymore

    iTunes shuffle is not working anymore after downloading latest version. The shuffle button is highlighted but it just plays the next track.

    If you need to change the computer that the iPad is synced to then see this user-tip : https://discussions.apple.com/docs/DOC-3141
    If you don't have all of your content on a backup that you can copy onto your new computer and into its iTunes (File > Add To Library), then you should be able to copy iTunes purchases from the iPad to it via File > Transfer Purchases (File > Devices > Transfer Purchases). For content from other sources (e.g. music that you copied form CDs) which you don't have on a backup, there are some third-party programs listed half-way down this page which should be able to copy them back from your iPad.

  • Itunes Library will not open!!!!!    itunes Library will not open!!!!!

    Hello,
    This is very frustrating that hundreds of people view these questions and only a few people answer. The issue here is that my itunes Library will not open. I'd sure like to know what is causing this and if it's gone forever.
    WinXP. Pro.
    I have many Mp3 music files under the same playlist names as in my ipod, i:e: Country,Jazz,Blues,Classic Rock, Alternative,vocal,light sounds,etc. When I drag new mp3 music files into my ipod library,then sync to my ipod, Itunes makes a backup of itune music files in their folder..I think. Anyway, those mp3 muic files are still on the Hard drive,but I can not open up my itunes Library. is it Gone????
    Sooooooooooooooo...I was slap-happy in upgrading my itunes software for my 80GB fith gen ipod for the kick of it. I downloaded the new updates.then tried to open my itunes library and it wouldn't open...I hooked up my Ipod thinking that may help open up the Library,but nothing.
    I tried the system restore,nothing. I uninstalled itunes,then reinstalled the itunes/quicktime download from apple. I clicked on the itunes icon on the desktop a few times and then a few times more,nothing. I guess I'm missing the itunes.ink file to open this up. regardless, I went to the Windows/Start/programs/itunes...nothing again. Windows Explorer/C:/ program files/itunes...nothing.
    I was afraid when I uninstalled the itunes software from before,it would erase the itunes Library,but the music is still on my hard drive,I just can't open the itunes Library. At this point,I should buy an external hard drive and transfer all my Mp3 files and the itunes music files/podcasts/photos,wipe the hard drive,reinstall the O.S. and start all over again.
    I'm guessing I am out of options with this itune Libray. Any suggestions? Thanks, Jim

    Still unanswered. I'm still trying to install itunes so I could use the library. I am removing Mp3 files from my hard drive to free up space,so if I ever do get the itunes setup,I'll have to remove the SYNC and do the manual so I ONLY transfer Podcasts into the ipod and not lose them becuase of the unchecked boxes.
    Ok, I uninstalled EVERYTHING that has to do with Itunes/ipod from the computer..Add/remove programs, serch all files/folders,Windows Explorer,Start>All programs,the Itune reference. Turned off all my Firewall,spyware,and anti-virus,,downloaded the new 7.5 version Itunes/ipod...saved to desktop,installed the new software...then NADA! NOTHING! I can click on the shortcut desktop icon, and all the other ways to click the software open, but nothing. peole on other sites reccomend Tag and rename and use the Winamp media Library,because of all the lack of personal customer support APPLE lacks. I guess I was a Big FOOL to spend my hard earned $350.00 for this ipod.

Maybe you are looking for

  • Problem in loadjava using sys account

    Hello When I load a jar file into the database using loadjava command using sys account like loadjava -user sys/<password> -resolve -order weblogic.jar it gave the following error loading : oracle/jdbc/driver/OracleResultSetCache creating : oracle/jd

  • Issue with BlackMagic HDTV codec in SHAKE 4.1

    Hi! Have a issue with using the Blackmagic HDTV 1920x1080 8bit codec. When adding it to a FileIn node i only get loads of grain in front of the video. I`l only get this problem when opening in shake, in quicktime its fine. anyone with same experience

  • IMac 27 - very poor quality audio when using analogue headphone output

    Hi, I've had my iMac 27 (i7 quad core, early 2010, OS X 10.6.4), hooked up to my hi-fi via the headphone output jack (analogue) since i bought the machine a few months ago, and its worked fine. However, the audio quality has suddenly deteriorated. Th

  • Set a text value to more pages...problem

    So how do I archieve this? I have a TextField1 in Page1(subform), and TextField2, 3, and 4 on pages 2, 3, and 4. If I change TextField1 all the other textfields must have the same text as in 1...Or can some one give me a idea were to look in the help

  • Nokia Lumia 720 capacitive button light leak

    I just bought Nokia Lumia 720 a week ago and i discovered the capacitive button has light leaked to the display above. The display is so beautiful and i like it but the light leak is annoying especially when the display is showing dark colour. Anyone