ITunes Library is locked on NAS - Config = three PC's and one Mac Mini

I have just purchased a mac mini to compliment the familys three laptops.
My itunes media and library are stored on a NAS and previously all the computers (running Windows) could access the library simultaneously. However now I am not able to open a iTunes on the Mac Mini and a Windows laptop at the same time, the 2nd compputer to access, whether it be the Mac or the PC  gets the message "The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file."
My sole intention of getting the Mac Mini was to have itunes permanently open on it so that my ipads etc could access the DRM content. so to keep closing iTunes on the Mac is not realy an option.

See above message.

Similar Messages

  • I do not have an apple computer,  I have had Itunes  Previously but had not used it for some time.  when I try to use it now the following message keeps coming up no matter how many times  install Itunes.  "The Itunes library is locked on a locked disc ?

    I do not have an Apple computer,  I have had Itunes previously but had not used it for some time,  I have Itunes gift cards but can not get ,on to use them.  I have tried to download Itunes again but the following keeps poping up, "The Itunes library is locked on a locked disc, oryou do not have write permission for this file."  How can I overcome this?

    To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file.  Once the file was deleted I was able to open iTunes without difficulty.  Note that I am running Windows 8.  Hope this helps!

  • I cannot open iTunes on my Macbook I'm getting the error message saying "the itunes library il locked or you do not have write permission for this file" what do i do to fix it?

    I cannot open iTunes on my Macbook I'm getting the error message saying "the itunes library is locked or you do not have write permission for this file" what do I do to fix it?

    Do #6 here
    ..Step by Step to fix your Mac

  • ITunes Library File Locked

    Hi,
    Have been using iTunes 10.5 on my WinXP machine - no problems.  During a movie download tonight, iTunes crashed.  Tried to reopen and got the infamous error "iTunes Library file locked or on a locked disk..."  Tried several remedies listed. 
    Verified that MyMusic folder and contents are not READ ONLY.  I am unable to rename, edit, or move the file...she's locked up tight.
    Tried repairing the Windows Registry assignment using the Tweak UI utility discussed in another thread.  No joy.
    Tried starting iTunes from another account on the PC - iTunes boots fine.
    Pulling my hair out (what little is left)...Any ideas out there ???
    HELP !

    Fixed.  For those using WinXP...Here's what I had to do:
    It was a file properties thing as mentioned in other posts, but to change the file properties...
    1.  Boot Windows in SAFE MODE by holding F8 down during bootup
    2.  Log on as Administrator
    3.  Navigate to the iTunes Libary.itl file (My Music/iTunes)
    4.  Right Click and pull up the file properties
    5.  Under Security, re-add the user account to the file permissions
    6.  Then change file permissions to FULL (Read/Write/Edit...)
    7.  Reboot & Viola !
    Once you unlock the write protected status (which got defaulted to the Adminstrator account), iTunes opens just fine. 

  • I upgraded my OS in my Mac and now I cab't open iTunes. Error message says the iTunes library is locked, in a locked disk or I don't have permission to write.

    I upgraded my OS from Lion to Mountain Lion. After that I can't access or open Itunes anymore. Message says " Itunes library is locked, in a locked disc or I don't have permission to write permission for this file.

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • ITunes library is locked or on a locked disk windows 7

    Hi all,
    I recently downloaded some software called Jamcast which allows you to view iTunes / Spotify files on your Xbox360.
    Since then my iTunes has been having problems.
    I have a large number of mp3s on here 110Gb so it's causing me a bit of annoyance.
    I'm getting the error iTunes library is locked or on a locked disk...
    If I hold down shift I can get into iTunes and do the scan for media which brings back all my music but it loses the smart playlists and then when I come out of iTunes and go back into it brings back the same error message again.
    My computer only has two accounts Mark administrator and Guest so I doubt it is a permissions error.
    Also I seem to have far too many folders in my iTunes folder in my Windows 7 library.
    I have
    iTunes
    subfolders
    iTunes Media
    Previous iTunes Libraries
    Mobile Applications
    iTunes Music
    iTunes Plug-ins
    iPod Games
    Album Artworks
    iTunes1
    subfolders
    iTunes Media
    Album Artwork
    and
    Playlists
    Recorded Radio
    License Backup
    iPod
    and my iTunes library fles I have
    iTunes Library.itl
    iTunes Music Library.xml
    itunesPrefs (2).xml
    iTunesPrefs.xml
    sentinel (2)
    iTunes Library.xml
    iTunes LibraryBackup.itl
    iTunes Library Extras (2).itdb
    iTunes Library Genius (2).itdb
    iTunes Library (3).itl
    iTunes Library (2).xml
    iTunes LIbrary (2) Extras.itdb
    iTunes Library (2) Genius.itdb
    iTunes Library (2).itl
    iTunes Library Extras.itdb
    itunes Library Genius.itdb
    sentinel
    A lot of the itl and itdb files seem to have a sort of locked icon on them.
    Please could you let me know what the xml files and itl files do in iTunes thanks.

    Copy the following (bold text) into a new document in Notepad (Don't use Word or Wordpad - they add formatting and it won't work)
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\*\shell\runas]
    @="Take Ownership"
    "NoWorkingDirectory"=""
    [HKEY_CLASSES_ROOT\*\shell\runas\command]
    @="cmd.exe /c takeown /f \"%1\" && icacls \"%1\" /grant administrators:F"
    "IsolatedCommand"="cmd.exe /c takeown /f \"%1\" && icacls \"%1\" /grant administrators:F"
    [HKEY_CLASSES_ROOT\Directory\shell\runas]
    @="Take Ownership"
    "NoWorkingDirectory"=""
    [HKEY_CLASSES_ROOT\Directory\shell\runas\command]
    @="cmd.exe /c takeown /f \"%1\" /r /d y && icacls \"%1\" /grant administrators:F /t"
    "IsolatedCommand"="cmd.exe /c takeown /f \"%1\" /r /d y && icacls \"%1\" /grant administrators:F /t"
    Save it under "All file types" as "ownit.reg". Save it to your desktop.
    Double Click it and click OK when prompted. You will now be able to take ownership of ANY file on your sytem with just a right click.

  • ITunes Library is locked, on locked disk, or you do not have write permission for this file... (on windows 7) how do i solve this...

    I have a ipod classic now for 3 yrs.... old laptop (windows) crashed... bought new laptop (windows 7)... pulled all music to expandable drive... so on new computer i loaded itunes... and tried to pull over my 5000 songs from external drive... about half went over... so tried to convert other half to itunes.... then closed itunes...tried  to open back up... and it wont let me.... saying :    iTunes library is locked, on locked disk, or you do not have write permission for this file......  pleaseeeeeee help me..... i am pulling my hair out.... whew...

    You can try to Fix permissions problems or see Recover your iTunes library from your iPod or iOS device.
    tt2

  • Trying to sync iPod with library, but receive this message, "The iPod is synced with another itunes library.  Do you want to erase this ipod and sync with this itunes library".  I do not want to erase my iPod... Any suggestions??  Please help!!

    Trying to sync ipod with itunes library, but I keep getting this message, "  The ipod is synced with another itunes library.  Do you want to erase this ipod and sync with this i tunes library?" 
    I do not want to erase my ipod!!!  Any suggestions?? please help!

    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
     Cheers, Tom

  • How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud.  I am sure I chose poorly at the 'keep file' window.  Please help. My Brain hurts- 18   movies need to go-.

    How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud.  I am sure I chose poorly at the 'keep file' window.  Please help. My Brain hurts… 18 plus movies need to go….  Thank you.

    Instead of removing the music from the cloud or the iTunes library why not shuffle your music using a Smart Playlist which excludes the holiday music, or tracks that are not checked. For example, use this very simple Smart Playlist:

  • HT201322 itunes 11.0.3 - in my iTunes library I can no longer see purchased TV shows and Movies that are not downloaded to my computer. also In my Itunes account i have no hidden TV shows or Movies

    I'm running itunes 11.0.3 -
    in my iTunes library I can no longer see purchased TV shows and Movies that are not downloaded to my computer.
    In my Itunes account i have no hidden TV shows or Movies
    I used to be able to view all cloud and downloaded content.  I no longer can.

    There used to be option to show items that are in the cloud in your library, but I can't find where that now is (unless it's been removed). You should be able to see what items that you can re-download via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (at the top right of that there should be a 'not on this computer' button)
    Edit : Just seen your reply, though I don't appear to have that setting on mine.

  • "The iphone is synced with another iTunes Library. Do you want to erase this iPhone and sync with this iTune's library?" error message.

    I have an iPhone 3GS and have never added any music to the device as I had an iPod. The iPhone and iPod are hooked up to the same computer and same iTunes account. My iPod recently broke and now I am trying to add some of my music to the iPhone but I get a message that says: The iphone is synced with another iTunes Library. Do you want to erase this iPhone and sync with this iTune's library?
    I have never had the iPhone hooked up to another iTunes account. I don't want to accept and say yes and lose all the info on my iPhone.
    Any tips or recomme

    I'm having the same problem after upgrading my iPhone 3Gs to iOS 5 (and upgrading iTunes to 10.5). I noticed after doing this the ring tone I was using for incoming calls was no longer on the phone. Before the upgrade I was syncing ringtones with iTunes without problems. My contacts and apps still still sync as before, but when I try to enable syncing for ring tones in iTunes, I get the message reported at the beginning of this thread. Any risk of losing anything if I go ahead and enable ring tone syncing? The message is definitely misleading.

  • I store my itunes library on an external drive shared between 2 computers and itunes on computer A isn't seeing or showing the songs I added using itunes on computer B.

    I store my itunes library on an external drive shared between 2 computers and itunes on computer A isn't seeing or showing the songs I added using itunes on computer B. How to fix this?

    I don't know if this is me adding files to iTunes when the external wasn't connected
    it is.
    is it OK to just keep deleting that library on the Air?
    i wouldn't - at least not until i
    mount the external
    point iTunes media folder location back to the external via preferences > advanced
    consolidate my library via file > library > organize library
    The ntfs hasn't seem to be causing any problems, but I've always wanted to know.
    in order for your Mac to write to NTFS drives, it needs some help by installing e.g. the NTFS 3G driver. apparently that or something similar is installed on your Mac already. preferably, it would be formatted for Mac but then windows machines would need to have e.g. MacDrive installed to recognize the drive.

  • How do you add the name of a song to a downloaded track not reccognized in the iTunes library.  I copy songs from my own CDs and want to properly identify them instead of the current "Track 02".  Thanks

    How do you add the name of a song to a downloaded track not reccognized in the iTunes library.  I copy songs from my own CDs and want to properly identify them instead of the current "Track 02".  Thanks

    Right-click the track in your library, Get Info, go to the Info tab, and type in the correct information.  When you are done, click "OK."

  • I have created another iTunes library (so I have 1 for an ipod touch and 1 for an iPad), but the apps from the iPad appear in both libraries. How can I stop this so teh 2 libraries are completely separate please?

    I have created another iTunes library (so I have 1 for an ipod touch and a separate 1 for an iPad), but the apps from the iPad appear in both libraries. How can I stop this so the 2 libraries are completely separate? Thanks

    You don't need two separate libraries to manage two devices.
    I suspect the reason that the apps are appearing in both libraries is that you have enabled automatic downloads in iTunes and automatic syncing of apps so that all your purchases end up in both libraries, defeating your original aim.
    Why not use a single library and make playlists for the media content you want on each device? Disable Settings > Store > Automatic Downloads > Apps on each device, then connect each device in turn and turn off Automatically Sync Apps on the Apps page.
    You can now manage your devices independently, while only having to manage the content of one iTunes library, instead of two.
    tt2

  • How do i get an itunes library from a phone when the computer has crashed and it needs to go on a new computer

    How do i get an itunes library from a phone when the computer has crashed and it needs to go on a new computer

    1) ensure iTunes is authorized for your iTunes store account(s)
    2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
    3) sync the device
    iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
    above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.

Maybe you are looking for

  • Bank Guarantee Process and Configuration

    Hi Gurus, Can you help me with standard Bank Guarantee Process and Configuration in SAP. Rgds, Harmees

  • Logout of youtube in photos app?

    I logged in to my youtube account to upload from the photos app on my iPad. With one account I was able to see a "sign out" button on the bottom of the youtube screen. With another account I don't see that button and can't figure out how to logout. A

  • After sync i lost my pages,numbers,keynote,documents

    After I sync my ipad I lost my pages, documents can anyone help

  • Scope of ALBPM Studio and ALBPM Enterprise Server

    Hi I have some simple questions about ALBPM Enterprise Server: it is really necessary to have this component in a production environment?. For example, if a company is very small with 10 or 15 employees and you have only 2 processes in the company, A

  • Why are scratch disks not used in PS CC 2014

    When editing very large project that include several layers of images and smart objects, I'm often using up all available RAM. Just as 14GB is reached, I get an out of RAM error and can't save (usually the smart objects updating is what kicks the err