Itunes library not loading after upgrading

Please help: I had to upgrade my itunes when I plugged in my Iphone and now it won't sync. No matter what I plug in (Ipad, Ipad2, Iphone or Ipod) the only thing that happens is the Iphotos will pop up and recognize that I have plugged in my device, but the Itunes does not load and sync. I don't know if I did something wrong, put when it asked if I wanted to use Icloud I clicked no. I don't know if that is my problem now or what. If anyone can help, I would appreciate it, as I am lost!
Thanks, Debbie.

johnc86,
Are you following the instructions from this article in the Apple Knowledge Base, in particular the renaming of the .itl file from the Previous Libraries folder?

Similar Messages

ITunes does not load after upgrading to 7.4.2!

Installed iTunes 7.4.2 just right now. When I try to start it, all it will do is quickly flash "iTunes" in the menu bar without starting; sometimes not even that will occur. I opened the Activity Monitor to watch the app; iTunes does appear to start when I double-click by showing up in the monitor; however, after a few seconds it disappears.
Anybody know what's going on?

Do you have QuickTime 7.2 installed from the Apple website?
Make sure to remove any "hackies", betas, and ShapeShifter, if installed.
Go to /Library/Receipts/drag iTunesX.pkg to the trash and empty.
Repair permissions ..... RESTART
Reinstall iTunes 7.4.2 (Mac) from the Apple website +without performing any other processes during the download or install!+
Repair Permissions
DIXIE

ITunes will not load after upgrade - says files missing

i got a prompt that my iTouch had new software for download. I went to download it and was prompted to download the latest version of iTunes first. I did this and now I can not access my iTunes. I get a prompt that iTunes cannot run because some of its required files are missing.
I am not sure what itunes version I had prevously but it was the latest version until I tried to upgrade. my itouch is version 4.1 (8b117). the itouch unit is a 2nd generaton. i am using windows 7 with IE 8.
Please help. what should i do now? I cant get into my iTunes to sync my iTouch
Thanks
Tim

I found out the issue with itunes. I had been using a converter program to convert movies for the itouch and the one I used also required a quicktime codec that must have interfered with itunes...I uninstalled the program...and itunes is back and running great. sorry to have rushed to judgement. Newfietom

ITunes will not launch after upgrade--click, bounce bounce, nada

iTunes will not launch after upgrade--rebooted nothing--2 bounce icon
then shut down all and unplugged, restarted--no change, iTunes still will not launch after upgrade
iTunes current version
on imac w/10.6.8

I have the same issue.
Allready uninstalled iTunes and reinstalled it, but the same problem occurs.
Icon keeps bouncing, and all that's visible is the first menu-item in the top menu bar, named iTunes. Nothing is clickable though.
The iPhone Configuration Utility doesn't seem to work either, it crashes on uploading an app to my iPhone. I guess it's using some of iTunes' libs or something.
Does anyone know how to get iTunes working again? I'm getting pretty desperate over here...
Thanks!

Itunes is not loading after i've updated to ios7. What do i do?

Itunes is not loading after i've updated to ios7. What do i do?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Library not found after upgrading to iTunes 7, old libraries don't work

For the second time since iTunes 7 was released, I've been asked to upgrade and did so without issue on the first day of upgrading. When I shut my computer down and came back the next day, however, the library is not found when I attempt to launch iTunes. Before, I simply reverted to iTunes 6 and copy/pasted a "previous library" as the current library. Now, though, I have a new iPod and it needs iTunes 7 to run. I've tried copy/pasting a previous library to the iTunes Library folder with no luck.
90% of my music is in the .m4a format so I need iTunes to listen! Not to mention, I need it to update my brand new iPod. I really need help on this, can someone give any advice? Thanks in advance.

johnc86,
Are you following the instructions from this article in the Apple Knowledge Base, in particular the renaming of the .itl file from the Previous Libraries folder?

ITunes will not startup after upgrade to 10.7 on Windows 7

After updraging to 10.7 I received an error message...
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)"
So attempted to install again, it appeared that iTunes was actually installed as I located it in my program files so when the download completed I ran repair, this did not work. So I uninstalled it completely and reintalled I got the same message. When I attemped to open the program from the start menu, I received a different error message....
"The procedure entry point kFigMetadataFormat_QuickTimedata could not be located in the dynamic link library MediaToolbox.dll"
I then restarted the machine, and I got thie following message on restart......
C:\Program Files (x86)\Common Files\Apple\Apple Application Support\YSCrashDump.DLL is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
Any idea guys as I have never ever had any problem with iTunes, I have always upgraded the new versions when they become available and have not had a problem, untill now. HELP!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Itunes will not launch after upgrade or reinstall

I was on itunes and the message popped up asking if i would like to upgrade and install a new version of itunes. I clicked okay. After this was done, I have been unable to launch itunes to update my ipod. I have tried to uninstall both itunes & Quicktime and then re-install both. I have also tried to clear out the temp files, however, I get the following error message...
Cannot delete hpodvd09.log; It is being used by another person or program. Close any programs that might be using this file and try again.
Can anyone help me? I am fairly new to itunes. Thank you in advance.

Hello Pac80 or anybody else...I took your advice (see below script) on a similar problem you assisted on last week.
I unfortunately am still not be successful in getting access to itunes..any more suggestions?..
1. after I load the upgrade from itunes on my system, i get a dialog box saying "itunes has encountered a problem and needs to close"
2. also i get "error 1905 model C:/Program files/itunes..."
any further advise would be greatly appreciated...cheers..M2
Goto control panel>add and remove in windows and
uninstall itunes AND quicktime. Then go here and roll
down to the section "Clean up iTunes installer files
on the computer"
http://docs.info.apple.com/article.html?artnum=93976
Now disable your antivirus and security programs,
then goto apple.com and download AND SAVE itunes to
your PC.
Once done goto the location you saved it and double
click it to install.
If it still will not open, scan your system with
Ewido www.ewido.com for a piece of adware called
Qoologic

Itunes will not open after upgrade

After upgrading to the latest version of itunes and quicktime it will not open (no error message given). If i log off as administrator and log on as another user it will open. is there a fix for this?

there's a few different things that can cause that on a PC.
perhaps try working through the user-account-specific section of the following document first:
iTunes for Windows: Troubleshooting unexpected quits, freezes, or launch failures

Facebook images do not load after upgrading to 6.0. What to do?

After upgrading to Firefox 6.0 my Facebook images will not open. I see a white box with a frame but after clicking on it a totally black square opens up instead a photo. All is OK when using IE9. (Also, the same with Twitpics on Twitter.)

If images are missing then check that you aren't blocking images from some domains.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
* Check that images are enabled: Tools > Options > Content: [X] Load images automatically
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

Itunes will not open after upgrading to 9

I cannot run itunes 9 on XP
Everything worked fine untill version 9 was released. At that point I reinstalled version 8 and everything was working.
Last week I bought an ipad and it forced me to upgrade to the latest version.
I opened after installing but once I rebooted Itunes no longer opens.
Itunes does not apear under applications in Windows task manager
under processes I see:
Itunes.exe
Ituneshelper.exe
Applemobiledeviceservice
Ipodservice.exe
If I try to open Itunes again a second copy of Itunes.exe apperes in processes.
Itunes.9.2.0.61
Apple application 1.3.0
Apple mobile device support 3.1.0.62
Apple software update 2.1.1.116
Running microsoft xp home edition 2002 Service pack 3

Norton security suite 4.2.0.12
That's the one that Comcast distributes?
If so, I'd check the firewall rules for your iTunes in the Norton suite first. (Norton generally has to update a rule for iTunes when your iTunes version is upgraded, so it's a prime time for something to go wrong with your rule for iTunes.)
End any running iTunes.exe processes, and then check to see if you currently have an iTunes rule in the firewall.
If you don't have an iTunes rule at all, create one allowing full access to the internet.
If you have an iTunes rule that doesn't allow full access to the internet, edit the rule to allow access to the internet.
If you have an iTunes rule that does allow full access to the internet, delete it and create a new rule for iTunes (allowing full access to the internet).
Restart the PC and then try another iTunes launch. Does it launch correctly this time?

[SOLVED] Modules not loaded after upgrade linux (3.9.5-1 - 3.11.6)

Hi. After upgrading the package linux from 3.9.5-1 to 3.11.6,
many modules such as wifi or psmouse are not loaded.
My PC is Asus Zenbook UX31E.
If I do by hand like
# modprobe ath9k
# modprobe psmouse
wifi and psmouse are OK,
but I want to set all necessary modules auto loaded.
* Output of lsmod of linux 3.9.5-1 was 87 rows
but lsmod of 3.11.6 (I attache below) is only 39 rows.
* Both
/etc/modprobe.d/
/etc/modules-load.d/
are empty on 3.9.5-1 and 3.11.6.
Please give me advice, thx.
Last edited by taro (2014-01-08 11:20:46)

Thx. The version numbers seem to be identical.
% uname -a [~]
Linux tenryu 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64 GNU/Linux
% pacman -Qi linux [~]
Name : linux
Version : 3.11.6-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.11.6
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 64493.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sat 19 Oct 2013 06:25:12 AM JST
Install Date : Fri 08 Nov 2013 12:06:17 PM JST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : None
best regards.

IPhoto Library Not Found after Upgrade to Leopard

I was running the newest iPhoto under Tiger and I just upgraded to Leopard. I tried to open iPhoto and a message said, "iPhoto library not found." It was there before I upgraded from Tiger. I mostly use Adobe Bridge so I didn't have much in iPhoto but I'm curious to see why the library disappeared and whether it can be restored. I looked all around on the hard disk and didn't see the iPhoto library anywhere. Thanks.

Yes, it must have been upgrade and install because I followed the defaults. The iPhoto library was in the Pictures folder in Tiger and I never moved it. After the upgrade to Leopard, it was gone--it is no longer in my Pictures folder, nor does it seem to be anywhere else. I didn't touch it--the upgrade made it disappear. Why did that happen? What can be done about it? Thanks very much.

Itunes library not loading in iphoto

the library shows, but will not load in iphoto. i've tried deleting the xml file to create a new one, but that didn't work.
i have recently moved my library to an external hard drive. i had no issues before.
any suggestions?

i have been running out of space on my hard drive because of my itunes library. i purchased an external and found a site outlining how to move it and did so. it calls for moving the main folder but not the album artwork or the xml file.
i open iphoto, create a photo slideshow and when i go to choose a song, it shows me the list but gives an error when i choose it. i had no problems previously, so i assume it's because the program cannot find the songs because the files are now on the external drive. i research and several sites say to delete the xml file and create a new playlist in itunes to redirect the files. this did not work and now i'm not sure what to do besides just moving it back to my hard drive and dealing with the space issues some other way.

ITunes Library not loading

Hello all,
Today, when I opened up iTunes it was loading my iTunes Library but then said there was a problem and said something like it has renamed the Library or file to "iTunes Library (Damaged) 1". This has occurred a few times in the past but this time after iTunes opened up: playlists and applications were missing. How can I get iTunes to work properly again?
I have tried opening the iTunes Library manually by going to File > Import, but it doesn't seem to react, as in doesn't open the library.
I have also tried using "system restore" to see if that solves the problem but the problem still persists.
Any suggestions?

Another I thing I tried recently is using the "change" option (in the Add or Remove Programs section) to fix and reinstall iTunes but it still hasn't made any difference.

Itunes library not loading after upgrading

Similar Messages

Maybe you are looking for