ITunes library was working fine on NAS, now busted
Pretty much as it say. I had moved the iTunes library to a NAS and used it just fine on my Power Mac G5. The library file was there, as were all the tunes. Got the new iMac, and went to load up the iTunes library... nothing. Claims there is no librarty file. But it's there, same as it ever was, I can see it. This is driving me nuts.
Should I just write off the dozens of playlists & ratings I created and start over? I really don't want to spend hours troubleshooting this crap. Hoping for an easy fix.
No one here said anything about an update or your device needing it.
FYI, you are not addressing Apple here, we are all users like yourself.
If the device is in recovery mode, the only option is to restore it. All data on the device is gone. This should not be an issue if the device has been used as designed and regularly synced/backed up.
Similar Messages
-
I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now. thanks itunes; it was working fine until i did the update you said i needed. what do i do now??????
No one here said anything about an update or your device needing it.
FYI, you are not addressing Apple here, we are all users like yourself.
If the device is in recovery mode, the only option is to restore it. All data on the device is gone. This should not be an issue if the device has been used as designed and regularly synced/backed up. -
connected my iphone to itunes earlier today...it was working fine...now i get an error message saying that my phone is in recovery mode...needs to be reset and that all media and contacts will be deleted.....is this really true? or is there a solution
No it's not true. It's one big practical joke being played on you by Apple.
-
ITunes radio was working last night and now today I get the message "An error occurred while contacting the radio tuning service. Check your internet connection, or try again later"
What's up?Two things to try, first, reset your PRAM.
Next, try rebooting your computer.
Please post back with results, -
i buyed a new unlocked iphone 4s in united kingdom. i inserted a sim card and it was working fine. but now i m in Kuwait for some time i inserted a local sim card and my iphone ask me to activate it but when i go through the process of activation my iphone does not read my local sim card. please help me out. i will be very thankfull.
thanks for this... I bought iphone 4 unlocked in USA in Dec 2012--being told by the salesperson IN the Apple store that there were Apple Stores in Quito & Cuenca. I'm in Cuenca now--NO STORE, & now that I need to activate--have also been told "not every cellular store CAN activate iphone!" I am reading about all these problems--yours is the first response that has a solution! Now going to set up with Claro... wish me luck! Any other advice you have on use in Ecuador--I'll be grateful :-)
-
I am using Windows Vista. My itunes launched fine until now. Now I get an error - "The Itunes application could not be opened. The required folder cannot be found". I have no idea what file it is looking for. Has anyone seen this error?
I have also tried to uninstall the package and I get the error Could not access network location %APPDATA%\. And it won't uninstall. I don't know why it's complaining in both cases.
Itunes was working 3 weeks ago with no problem.
HELP!!!hey did u ever get you itunes fixed?
-
Oracle 10g express edition was working fine for months now stopped working
hi all,
I was working with oracle 10g expree edition fine for months via the front end provided. Created several databases and tables.
But suddenly for some weeks it is not starting and the URL
http://127.0.0.1:8080/apex is not working
and also I am not able to start the database so can't have the dump file exported.
the trace i am having for starting the db is :
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
System error 5 has occurred.
Access is denied.
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
System error 5 has occurred.
Access is denied.
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>
So pls help me to recover the database.
I am going to install 11g now.pls find below output
C:\Users\DELL>set
ALLUSERSPROFILE=C:\ProgramData
ANT_HOME=C:\TOOLS\apache-ant-1.7.1
APPDATA=C:\Users\DELL\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=DELL-PC
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\DELL
JAVA_HOME=C:\Program Files (x86)\Java\jdk1.5.0
LOCALAPPDATA=C:\Users\DELL\AppData\Local
LOGONSERVER=\\DELL-PC
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\
ORACLE_HOME_NAME=XEClient
OS=Windows_NT
Path=C:\Program Files (x86)\PHP\;C:\Program Files\Common Files\Microsoft Shared\
Windows Live;C:\XEClient\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:
\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\Window
sPowerShell\v1.0\;C:\Program Files\Dell\Dell Wireless WLAN Card;c:\Program Files
\WIDCOMM\Bluetooth Software\;c:\Program Files\WIDCOMM\Bluetooth Software\syswow6
4;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;c:\Program Files (
x86)\Microsoft SQL Server\90\Tools\binn\;C:\TOOLS\apache-ant-1.7.1\bin;C:\Progra
m Files (x86)\Java\jre1.5.0\bin;C:\Program Files (x86)\Java\jdk1.5.0\bin;C:\Prog
ram Files\Common Files\Microsoft Shared\Windows Live
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PHPRC=C:\Program Files (x86)\PHP\
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
SESSIONNAME=Console
SQLPATH=C:\XEClient\sqlplus
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\DELL\AppData\Local\Temp
TMP=C:\Users\DELL\AppData\Local\Temp
TNS_NAMES=C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\tnsnames.or
a
USERDOMAIN=DELL-PC
USERNAME=DELL
USERPROFILE=C:\Users\DELL
VS80COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 8\Common7\Tools\
windir=C:\Windows
C:\Users\DELL>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Apr 28 21:19:36 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: rcxmer
Enter password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: a
Enter password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
C:\Users\DELL>lsnrctl stat
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 28-APR-2011 21:20
:45
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Message 1053 not found; No message file for product=NETWORK, facility=TNSTNS-125
57: Message 12557 not found; No message file for product=NETWORK, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=NETWORK, facili
ty=TNS
TNS-00527: Message 527 not found; No message file for product=NETWORK, facilit
y=TNS
C:\Users\DELL> -
It was fine yesterday, this morning got up to do what I usally do, Shut down on me
Called Apple 3 times followed thier instructions (Wifi Troubleshhot and Connectivity) EVERYTHING now its garbage!
I know I can get a protection plan but my mom said thier was no need for one because of the price!
Ive tried updating it...It said it needed wifi!
Dont know! Feel screwd up at this point Can any one help me???!!! It is also a year old! Got it in January and It has not lived to its first birthday!!!:'(If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple -
Entire trip have had no problem using the phone in different locations as we traveled. Now I am unable to make or receive calls or texts, unless I am on wifi. Then I can send/receive imessages and other normal web functions. I checked settings>carrier and that's "on" and settings>general>network and both cellular data" and "Data Roaming" are "on" but I'm not getting or sending data when not on wifi, so cell data is apparently not working. Any thoughts?
If the phone is reading No Service, then no, the cellular connection is not made. Did you change SIM cards during your travel? It is possible your home carrier is not recognizing the phone. With the home carrier SIM installed, do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The other alternative is to go into Settings, General, Reset, Reset Network Settings.
-
the little green light is lit on the charging transformer. but the battery won't charge. thoughts?thanks,--Pete
Pete_M,
Does the battery light come on when the system is powered off? If so, it might be a bad charging adapter. Send me a PM with the following information and I'll see what I can do for you:
SNID or serial number
contact name
contact number
contact email
shipping address
date of purchase -
I suddenly cannot open my iTunes. Was working fine a few weeks ago but now a message comes up asking me to use the English version. (I am using Windows 8)
Hey MichelleOland,
Thanks for the question. I understand that you are experiencing issues opening iTunes for Windows. Let’s try completely removing iTunes and all related components and then re-installing from Apple’s website:
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
http://support.apple.com/en-us/HT1923
Additional information:
If you can't install or update iTunes for Windows - Apple Support
http://support.apple.com/en-us/HT201668
Thanks,
Matt M. -
HT201263 my iphone 3g was working fine and now is not turning on
my phone wont turn on it was working fine yesturday and now wont show its charging or connect to itunes it was in 4.3 software could that be the problem
try a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up.
-
Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.
-
my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
My iPod Classic was working fine all day. Came home and uploaded 2 files via iTunes, now there is no sound coming from my iPod. I've tried both headphones and a docking station......nothing. The songs don't even engage, they skip to the next one. I've tried rebooting the iPod and still nothing. Any ideas?
KimHi, and welcome to Apple Discussions.
Have you tried resetting the PMU?
I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.
Maybe you are looking for
-
How can I play music on the apple tv from itunes?
Hi! two months ago I was able to play music on the apple tv, but today I can not. Some one knows why? I can not find the option to share to the apple tv.
-
Lightroom does not import my images from 70d camera sd card when there is video on it
I am attempting to import images into Lightroom 5 from a wedding that was shot on a 70d canon camera and recorded to an sd memory card. There are also two short videos (less than 2 minutes each) on the card. Lightroom acts as if it is importing with
-
Two column region with control break
Hi there, I'd like to create a report with multiple columns. There is an excellent thread here: Two column region, is that possible? However, it seems to be very hard to implement control breaks based on column value. I had a test of new 3.1 interact
-
CANNOT OPEN FLASHPLAYER ON MY PC EVEN THOUGH IT'S INSTALLED
Good Morning...I have installed Adobe Flash Player 10 Active X, but it doesn't show up in my Programs under the Start tab. However, it it does show up when I go under Settings/Control Panel/Uninstall. So, under Uninstall, I am able to unstall it bu
-
ACL on servlet doesn't work?
When we put an ACL to require authentication on a servlet directory, it works as expected when the client posts to the servlet from a form. But an URL like this http://hostname/servlet/OurServlet?param=xxx is not affected (the default ACL applies ins