ITunes loads, but nothing shows up (it's blank)!

The iTunes store kinda loads, but when it finishes loading, nothing shows up. Pleease Help!!!

See here: http://support.apple.com/kb/TS4123
B-rock

Similar Messages

  • TS1398 I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays "C

    I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays “Cannot Get Mail” – The mail server “imap.gmail.com is not responding, Verify that you have entered the correct account info in mail settings
    Other times the Wi-Fi connection works fine and it check e-mail or other within few seconds. The connection problems seems to be intermitted
    This issue never happened before with IOS 5 since I bought the new phone in Oct 2011.

    We suffered the imap.gmail.com server problem After an IoS 6 upgrade. The simple solution is to delete the problem account, shut down the iPad, start up again and reenter the account. Everything comes back normally. Good Luck everyone!

  • Yesterday i sync music to my ipod touch from iTunesn but nothing showed up in the 'recently added' folder. now today neither my computer or iTunes is recognizing the ipod. I uninstalled iTunes and reinstalled it and restart the computer

    Yesterday i synced my music to my ipod touch from iTunes. the musice went on but nothing showed up on the ipod in the 'recently added' folder. now today i went to connect it to the laptop and neither my computer or iTunes recognized the ipod. 1st a message showed up saying an ipod was detected but cuddn't be identified so reconnect and when i did nothing showed up again. i have uninstalled and reinstalled iTunes and restarted the computer a number of times but the ipod still wont show up. Can anybody help?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Does the iPod charge?
    Have you tried another cable?
    Another computer to help determine if you have an iPod or computer problem?

  • How do i get the music from my iphone to my new mac? it says it backed up and synced but nothing shows up in my itunes library!

    it says it backed up and synced but nothing shows up in my itunes library!! please help!

    Transfer your iTunes library from your old computer to your new computer per the instructions included with this link - along with your photos, documents, and any other important data you will need or want to access on your new computer.
    http://support.apple.com/kb/HT1751

  • HT1212 itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the scree

    itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

    I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

    The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • Water splashed my iPod 4th generation an worked initially, but now when it is plugged in it sounds like it is powering up but nothing shows on screen, do I need a new LCD screen?

    Some water got on my iPod touch 4th generation and when plugged into iTunes it is recognized but nothing shows up on the screen. Does this mean that I need to replace the LCD screen?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       
    Apple will exchange your iPod for a refurbished one for $199 if a 64 GB one and $99 for the others. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • I updated to 4 everything I typed was backwards I deleted 4 tried to install the earlier version it downloads but nothing shows up to extract the file

    oops, I tried to download the previous version and it won't let me, so I tried to reinstall 4, it downloads but nothing shows up to extract the file

    I'm having the same issue.  Lion is up to date with v10.7.2.  Currently running iTunes 10.4.  Tried installing the regular way...un-installing, re-installing...re-downloading from internet...dragging the install into iTunes icon on dock...I'm perplexed.  Every time I plug in iPhone or iPad, it tells me there's an update available - when I click to update, it's the same thing - then the software update utility keeps stating that all software is up to date.  Sigh...I feel as though I'm chasing my tail.
    Hopefully, there are answers out there!  iOS 5 is so cool!!!

  • When user clicks on "Like Button," the counter increases but nothing shows up showing the user recommends my site to their friends. What did I do wrong?

    When user clicks on "Like Button," the counter increases but nothing shows up showing the user recommends my site to their friends. What did I do wrong?
    I used the iframe code from Facebook's "Like Button" site; and inserted the code in the html widget popup box, then positioned it where I wanted it on my page and published. It looks fine (though I had to add "http" before my url to get it to show up).
    So, when a user clicks on button, a pop-up opens asking for Facebook password. When I (the user) enter a password, nothing happens after that. I thought the idea was that a user would be able to show their friends that they like my website. After I entered my password in pop-up after clicking on "Like" I went to my facebook page (a company page) to see if it showed that I (the user that clicked on "Like" on iweb) recommended the website. But nothing showed up. I thought maybe it was because Facebook associated my password as the admin for the Facebook page so didn't count it. But a friend tried it and same thing happened. I went back and on one page I put in another facebook code for a combo Like/Send button. It shows up but acted the same as the regular Like button.
    Questions:
    1. Is this the way the Like Button is suppose to work? Only benefit of Like button being that it just counts the clicks on the Like button and does NOT let users share their recommendation with their friends?
    2. If it's suppose to let users share their "Likes" with their friends, what did I do wrong? There were three types of code but in reading discussions, they all say to use iframe. (I used the first choice which I think was html for Javascript SDK and put that in my HTML Snippit box and the Like/Share button showed up on my iweb page next to the facebook icon and the words "likes this" but when I click it, I don't see instructions that it's sending my recommendation to my friends.)
    I must have done something wrong, but can't figure out what. Does anyone know? If the only benefit of the Like Button is the counter, it doesn't seem worthwhile.
    Thanks to anyone who can figure this out!  My website is couponsforfun.com

    You want something like this?
    http://home.wyodor.net/demoos/facebook/
    The send button sends the link to their friends in the address field with a message.
    They recieve a message in the inbox.
    There's no post on a page.
    If they want that, then they should share the link themselves.
    Perhaps it's best to study what facebook has to offer and how it works instead of guessing what it is supposed to do and be disappointed.

  • I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions? Thanks

    I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?

    What do you mean by "HD to VGA adapter converter"?
    Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
    Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
    In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
    You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
    http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
    Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work

  • It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.

    # Question
    It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.
    Also in the '''Properties''' window of Windows Explorer I '''no longer have the Details tab''', so I can't update my mp3 files with Artist, Album, Genre, etc. But the details tab does show up when I access it thru Windows Explorer.
    I ran the AVG rescue disc an no viruses found. Now on '''FF3.6.15''' '''RealPlayer''' shows when I right click but then '''immediately disappears and an icon appears in the System Tray''', but as soon '''as I hover my mouse over it it disappears'''.
    Does anyone have any ideas or suggestions?
    How can I get this fixed? I have time-sensitive mp3s that I won't have access to anymore if I don't get this resolved in a hurry. (no pressure on you, I'm the one that's stressed about this) Can you help? Thanks so much for responding to this '''inquiry.''''''bold text'''

    See:
    *https://support.mozilla.com/kb/Downloads+window
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history" > "Remember download history"

  • HT1473 My itunes will not open at all - I repeatedly get the message"itunes library is corrupted...not installed correctly...please reinstall itunes" I have tried opening all my itunes folders but nothing will even open.

    My itunes will not open at all - I repeatedly get the message"itunes library is corrupted...not installed correctly...please reinstall itunes" I have tried opening all my itunes folders but nothing will even open.

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • Bookmarks not showing in menu dropdown but still are in url line. When doing the restore feature, it says 807 items but nothing shows up still after.

    Earlier today my bookmarks were there. Later tonight, not there.
    I've tried the whole restore bookmarks process, I've copied the folder and deleted the places file thing. None of that has worked.
    What's weird is if I type something in in the URL box that I know is in my bookmarks, it will show up like it's in the history. But nothing shows up in my bookmarks folder at all.
    I need some help on this as I've tried almost every way I've read and nothing has brought them up. And like I said in the title, I have over 800 bookmarks and a lot of them are work related.

    Another user had a similar problem a couple of days ago, but was fortunate to have a backup of places.sqlite to restore. See: [https://support.mozilla.org/en-US/questions/981306 Invisible bookmarks].
    When you deleted places.sqlite file and Firefox regenerated your database, it presumably used the most recent backup. I wonder whether the most recent backup contains the same mysterious corruption. Do you want to try recovering from the next older one?
    In your profile folder, after exiting Firefox, open the bookmarkbackups folder and move the most recent JSON backup file(s), anything from today, to a safe location (e.g., your Documents folder). Then go back up a level and rename places.sqlite to something like places.wtf.
    ''Note: if Windows does not display these file extensions, turn on viewing of file extensions to ensure that you can work with similarly named files accurately. This article has the steps: [http://support.microsoft.com/kb/865219].''
    When you start Firefox, it should rebuild the places database again, this time with that older backup. Any difference?

  • Why are my movies not downloading? there is always coming error 9006 or it pretends that its loading but nothing is going...

    Why are my movies not downloading? there is always coming error 9006 or it pretends that its loading but nothing is going...

    wjdavis wrote:
    I can't remember exactly what I did. I do know that when I started it up, I couldn't find the Setup Assistant on the hard drive,
    No, once a user has been created, you can't run Setup Assistant  (without erasing and reinstalling).
    What do you recommend for fixing this?
    Here's what's happened: 
    When you first start up a Mac and create the first user account, OSX assigns it UID (User ID) #501.  The next one gets #502, etc.  Those UIDs (not the user name) are what control permission to files.
    You can see those numbers via System Prefs > Users & Groups;  click the padlock and enter your Admin password, then select an account and right-click it, and select Advanced Options.  Do not change anything on that window.
    So . . . assume your old iMac had a user 501 with the data you want; it's identified that way on the backups.
    When the Apple Store started up your new Mac, and created their account, it became #501.
    When you used Migration Assistant to transfer the 501 account from the iMac's backups, OSX copied everything there "as is" except it had to change the 501 to 502. 
    The new 502 account has all the right permissions to things now in it's home folder, but the backups belong to user 501.
    Have you added much to the Mac since you did the migration?  Have you done any new backups?  If not, while it's a bit of a hassle, one fix would be to create yet another user account temporarily.  Make it an Admin account.  Log on to it and delete all the other accounts.  Then migrate the accounts from your backups; this time there won't be a conflict, so OSX won't have to change the UUID(s).
    But if you have done new backups, this won't work, since Migration Assistant automatically uses the most recent backup.  There's a way around that, but it's a bit (or more) tedious.
    Clear as mud? 

  • HT204266 I tried to buy credits from a game I am playing but using visa card it was accepted once then all are rejected asking me to go to iTunes support but nothing there. How to solve this problem.

    I tried to buy credits from a game I am playing using visa card it was accepted once then all are rejected asking me to go to iTunes support but nothing there.
    How to solve this problem?

    You need to email iTunes Store Support. Click or tap  on Purchases, Billing and Redemption in here....
    https://expresslane.apple.com/Issues.action

Maybe you are looking for

  • How can I be reimbursed and cancel my old account?

    I wanted to cancel my old membership this afternoon, but I quickly realized that money was automatically taken out of my account in the morning. Shortly after I had paid for a membership, my school, Parsons The New School of Design, allowed students

  • How-to: how do I check the disk speed on MacBook Pro?

    I ordered and received a MacBookPro 15". I ordered the faster disk: "200GB Serial ATA @ 7200 rpm [Add $100.00]" QUESTION: how can I verify that I did in fact got this 7200 rpm disk? thanks Foad

  • Error Messages:ORABPEL-10007 and ORABPEL-10056

    Can anyone please help in resolving these error messages. I get these error messages while validating the BPEL process. Thanks Error(20): [Error ORABPEL-10007]: unresolved messageType [Description]: in line 20 of "C:\OraBPELPM_1\integration\jdev\jdev

  • Lync Delegate Meeting Creation works in OWA but not in Outlook 2010

    The environment is Exchange Online and Lync Online. When users are assigned Delegate rights (either through Outlook OR via Powershell into Exchange Online) they are able to create regular meetings, modify calendar entries per their rights assigned in

  • Demo Error - HTTP response contains status code 404

    Dear all, While configuring the first demo on XI 3.0, I encountered the following errors when executing the scenario. The scenario is "Configuring Integration Scenarios for proxy-to-proxy communication" - Checking flight seat availability. <?xml vers