ITunes loads into two winxp profiles at the same time...

Well I just installed itunes.. For some reason if my gf's profile is signed in and I start itunes.. itunes opens up in her profile as well as mine... but when i switch to her profile the itunes window says that itunes already running.
if i start itunes under her profile this does not happen.
this only happens when I start itunes on my profile.
has anyone else experienced this or know how to solve this problem???
I installed itunes under my profile.
Note:
I also noticed that if i open and close the pref window another instance of itunes shows up under my gf's profile in the task manager. it only shows up after i close the window.
Message was edited by: dshade

but can both users be logged in on to winxp??
Because my issue is that when I open itunes, itunes also opens on my gf's profile within 2 secs of itunes being open. and everytime i open the pref window or some sort of window pops up another instance of itunes opens on my gf's profile. so i would either have to switch to my gf's profile and dismiss all the you can only have one instance of itunes open windows or i have to kill the process in the task manager
my gf doesn't use itunes at all since we don't own an ipod and she dosen't listen to music on the computer, and i am only using it for the store.

Similar Messages

  • How to insert into two differents tables at the same time

    Hi
    I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
    and I want to insert into two differents tables at the same time using one view.
    How can I do that ?
    TIA
    Edgar

    Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
    1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
    2. Create an INSTEAD OF trigger on the view.
    3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
    IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
    INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
    INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
    ELSE
    IF :NEW.deptname IS NOT NULL THEN
    UPDATE dept SET deptname = :NEW.deptname
    WHERE deptno = :NEW.deptno;
    END IF;
    IF :NEW.empname IS NOT NULL THEN
    UPDATE emp SET empname = :NEW.empname
    WHERE deptno = :NEW.deptno;
    Try something along those lines.
    null

  • How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

    I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

    Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

  • Cant open multiple profiles at the same time on Outlook.

    So i have done some research and found that you can use command line switches to open different profiles in Outlook.
    e.g. "C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE" /profiles "ProfileName"
    What i want to do is open two different profiles at the same time. So i already have one profile open, i use the method above, however it simply opens a copy of the profile i already have open rather than the one i defined in the command line switch?
    I know it works because if i don't have a profile open it opens the profile i specify. Is this by design? If so what is the point in having a profile switch? If someone could help me get this working it would be great.
    Thanks in advance.

    Hi Eric,
    Thanks for confirming this. We already have all the mailboxes that she wants on her main profile. The problem is that Outlook cant handle processing all of these at the same time and continuously crashes and hangs. As i said previously the .ost for her profile
    was 16GB, i have managed to reduce to 9GB but Microsoft themselves say that anything above 5GB needs extra hardware power for a good user experience.
    http://support.microsoft.com/kb/2695805/en-gb 
    Up to 5 gigabytes (GB): This file size should provide a good user experience on most hardware.
    Between 5 and 10 GB: This file size is typically hardware dependent. Therefore, if you have a fast hard disk and lots of RAM, your experience will be better. However, slower hard disk drives,
    such as drives that are typically found on portable computers or early-generation solid-state drives (SSDs), experience some application pauses when the drives respond. 
    More than 10 GB: When the .ost file reaches this size, short pauses begin to occur on most hardware.
    Very large (25 GB or larger): An .ost file of this size increases the frequency of short pauses, especially while you are downloading new email messages. However, you can use Send/Receive
    groups to manually sync your mail. For more information about Send/Receive groups, see the "Are you synchronizing many RSS feeds?" section.
    I find it surprising that you cant have multiple profiles with different mailboxes when you consider you can only have an .ost up 5GB to have a good user experience. Maybe this is something the developers can put into the next version of Outlook? Or release
    as a patch?

  • How do I divide a large catalogue into two smaller one on the same computer?

    How can I divide a large catalogue into two smaller ones on the same computer?  Can I just create a new catalogue and move files and folders from the old one to the new one?  I am using PSE 12 in Windows 7.

    A quick update....
    I copied the folder in ~Library/Mail/V2/Mailboxes that contains all of my local mailboxes over to the same location in the new account. When I go into mail, the entire file structure is there, however it does not let me view (or search) any of the messages. The messages can be accessed through the Finder, though.
    I tried to "Rebuild" the local mailboxes, but it didn't seem to do anything. Any advice would be appreciated.
    JEG

  • Bulk load users into Directory and Messaging at the same time

    Can I bulk load users into Directory and Messaging at the same
    time?
    <P>
    Yes, but you are not really loading users into the Messaging
    Server. The Directory Server contains all kinds of information about
    users, including information about their email. So if you want to
    load user information into the Directory Server, including the users'
    messaging infromation, you must install the Directory server first.
    Configure the directory server. Then install the Messaging Server.
    Then you can load users into both by loading an LDIF file with the
    user information.

    Hi,
    You can check the documentation: Multiple Copies of RMAN Backups ;-)
    When backing up datafiles, archived redo log files, server parameter files and control files into backup pieces, RMAN can duplex the backup set, producing up to four identical copies of each backup piece in the backup set on different backup destinations with one BACKUP command. (Note that duplexing is not supported for backup operations that produce image copies.)
    There are three ways to specify duplexing of backup sets when using the BACKUP command:
    Specify a default level of duplexing with CONFIGURE... BACKUP COPIESAll backup commands that back up data into backup sets will be affected if you use this option, unless you specify different duplexing options for a command using SET BACKUP COPIES or provide a COPIES option for the BACKUP command.
    Use SET BACKUP COPIES in a RUN block All commands in the RUN block will be affected, overriding any CONFIGURE... BACKUPCOPIES setting, except those where you provide a COPIES option as part of the BACKUP command.
    Provide a COPIES option to the BACKUP command For this specific BACKUP command, files will be duplexed to produce the number of copies you specify.
    Cheers
    Legatti

  • Control two different parameters at the same time

    Two motors were connected each other rigidly. One motor controlled torque and the other motor controlled speed. I generated some torque and speed data which represented one cycle of motion from a motor simulation. I like to send these two different data sets (torque and speed) to two different motors at the same time. Torque data sends to one motor and speed data sends to the other motor to see the response of the load profile. In order to do this, I thought about using multithread, but I am not sure it will work for this application. Usually multithreading delay the CPU time so the overall control process might be delayed, right? If you have better idea, please let me know.

    If you are using one motion controller to control both motors, you will probably run into problems if you try to use multithreading on the PC. However, you can execute up to 10 programs (threads) at a time, in addition to host communication, using on-board programming. For more information on on-board programming please refer to the following tutorial: Developer Zone Tutorial: On-board Programming in FlexMotion
    Best wishes!
    Dawna P.
    Applications Engineer
    National Instruments

  • How can I verify credit of an itunes card that has already been redeemed?  My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

    How can I verify credit for an itunes card that has already been redeemed?  My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

    Have you checked the account's purchase history to see if anything could have used up the balance : See your purchase history in the iTunes Store - Apple Support ?
    If there aren't any purchases then try logging out and back into the account (e.g. on your iPad tap on your id in Settings > Stores and then log back in) and see if a balance then shows on it. My account's balance shows at the top right of the store's page on my computer's iTunes, by clicking on my name towards the top right of the iTunes screen, and by logging in to view my account via the Store > View Account menu option. On my iPad devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > Stores and it should show on the screen that you are taken to)

  • Ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Maybe here:
    Trouble installing iTunes or QuickTime for Windows
    iOS: Device not recognized in iTunes for Windows
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Two processes running at the same time in Lookout

    I have installed Lookout 5.0 with 200 I/O Points onto our server computer. The application of motion control is next to the 200 I/O points through OPC PMAC server/client. Now I would like to have a second process in the same server for trouble shooting and testing without stopping the motion control process. However, this second testing process could have also many I/O points through Serial and USB ports. I assume that the total amount of I/O points of both processes will be greater than 200.I prefer to have independent processes for control and testing because access levels. Can I have these two processes running at the same time when needed?

    Hi,
    From your description you are using a third party OPC server for the motion application. You could have a second Lookout process communicating with the same OPC server with no problems, as long as you do not exceed the number of I/O points your license supports.
    Also, the process you are using for testing obviously could not overwrite datamembers (or registers if you will) that would interfere in the overall application, in other words you can test your application as long as you keep the coherency of the test.
    So the answer would be, yes it is possible, however you are still limited to the number of I/O's your license supports... You may even consider upgrade the number of I/O's you have in your license.
    Best Regards
    Andre Oliveira

  • How to sync with two computers not at the same time, I'm registerd with one computer

    How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
    Where do I find my Sync Key ? so I can install manually if it works ?

    Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
    https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

  • HT201236 I want to do something so simple that there are no instructions. I just need to have two windows open at the same time so I can transfer files from one to the other by drag

    I want to transfer files from one device (or page ) to another by drag and drop , so i need two windows ope   at the same time,
    I know this can be done but I have forgotten how

    Don't use any full screen options for any app that has them
    Mount your device and double click on it to open it. Drag this window to the upper right of your Desktop and resize it to a bit less than half of your Desktop.
    Open the next folder and position it on the lower left side and resize it so you can still see the previous window.

  • Can I open two Safari windows at the same time?

    Can I open two Safari windows at the same time and split the windows in two on my screen? Right now, I have to open Safari and Firefox to get the split screen. I know I can press command to get multiple tabs, but that's not what I want. I want to use Safari on two open windows.

    HI,
    Open a browser window in Safari. Then Command + N
    Press command and ~ or ` to toggle between the windows.
    Carolyn

  • How do i run 2 profiles at the same time?

    i have 2 profiles created but i want to run 2 separate profiles at the same time and i cant figure out how...... :-( Please help!!
    Thanks
    Ron

    Use the -no-remote command line switch to open another Firefox instance with its own profile and to run different Firefox instances simultaneously.
    * http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Bypassing_the_Profile_Manager

  • Is there any way to have two garagebands open at the same time?

    I'm remixing a NIN song, and I need to have two garagebands open at the same time, is this possible? If so, please help!!

    it is possible, but you'd be on your own if there's a prob, and you can't copy and paste between them if that's what you're trying to do

Maybe you are looking for