Itunes loses connection after every song

my remote speakers go silent after every song.
macbook pro to gigabit airport w/aidisk drive to airport express.
this is a new problem all of a sudden, i lost connection before but rarely
and usually due to an error with the firewall.
itunes continues to play but the remotes are silent.
thanks for any help.

Are all the songs in the playlist checked (the checkbox in front of each song checked)?
Patrick

Similar Messages

  • ITunes stops after every song

    Hey there, sorry for the potential stupid question. I've been using iTunes for a long time now, but I've never encountered this before. Basically, the title says it all. After every song, iTunes goes idle. This occurs in playlists, the library...everywhere. Maybe I checked something random without intending to, but I've looked around and can't figure it out. Any help would be more than, um, helpful. Thanks!

    Welcome to Apple's user-to-user discussion forums.
    Did you accidently uncheck all the tracks in your library? Are the boxes in front of all the titles unchecked? If so, place your cursor over one of the unchecked boxes and Command-Click. All of the boxes should turn blue and will now contain a checkmark. iTunes will stop if there are no checkmarked tunes to move to after the currently playing track.

  • Itunes folder on external: every song has a duplicate

    I looked at my external HD itunes music folder and every song has an exact duplicate. ie) song.mp3 has a sister song.mp3...although in my actual itunes program only one is listed, there are no duplicates. My ipod also only syncs to the itunes program and only is syncing one song not the dupes. I don't know how it happened but it is obviously taking up double the space on the external. Other than going through and spending two hours deleting one of the files (and not knowing which one to delete) what can I do to dump the dupes. I clicked a few of them and they both open equally no matter which one I click...so I know that they are exact dupes. Thanks

    One thing that I found is that the external reads song.mp3 and then another reads song1.mp3 etc...same file size etc just a "1" after the dupes. Any new CD I load does not dupe... I had an old macbook and now have the new imac.

  • Can the genre of a song or album in my itunes library be changed?  While loading to the itunes library, or after the song or album has been loaded?

    Can the genre of a song or album in my itunes library be changed?  While loading to the itunes library, or after the song or album has been loaded?

    Kay -
    Glad it helped.  Enjoy the music!
    Ed

  • HT1695 My phone sttruggles to connect to wifi & if it does connect it loses connection after a few moments

    My phone sttruggles to connect to wifi & if it does connect it loses connection after a few moments, This has happened a few months ago and i had a replacement phone sent a couple of weeks later it happened to my husbands i phone 4s and now 4 months later im having the same problem!

    Thanks, My Husbands I phone and Laptop are not having any issues connecting to the wifi and i have reset the network settings and have restored the phone. It will connect to the wifi for a second then looses connection.

  • Speakers return to default volume after every song

    Hello,
    I just bought a new Toshiba laptop yesterday, and it is equipped with Windows 8.  I have Pandora running on it currently, and whenever a new song begins, the speakers return to some default volume which is too loud for my office.  How do I get
    the volume to stay at the level I set it at, even when a new song plays?

    I play Pandora all the time in IE11 on Windows 8.1 (right now, in fact).  It doesn't return to default volume after every song here.  I doubt that Pandora's web programming is causing it, at least not directly, or everyone would be seeing
    it.  You should not expect it to do so.
    Edit:  I play it via the Desktop IE11.  I didn't think to mention it.  Is that how you're running it, or are you using the Metro / Modern interface?  Try it on the desktop if that's not where you're running it and see if the
    behavior is different.  Perhaps it's just another problem with the toy interface.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • Connecting Window iTunes Store appears after every single search character

    Hi Community,
    if I use the search in iTunes 10.3.x Store, after tipping a single character always a separate window appears with the message "connecting to the store" - the window appear after every single character of a search e.g. "Madonna" and it will lasts minutes to get a result!
    It looks like here: http://dl.dropbox.com/u/1426841/itunes.png
    Did anyone have a idea what to do?
    I've just tried following steps:
    clear iTunes caches
    delete iTunes plist's
    delete and reinstall iTunes
    perform pram reset
    latest iTunes updates
    Nothing helps at all to cover this problem!
    This problem exits since a few month (starting with iTunes 10.2.x), just starts from one day to another without any change at the OS.
    Thanx in advance for any helpful ideas ;-)

    Try clicking Store>Authorize This Computer in iTunes.
    If that doesn't take care of it, take a look at this Apple document -> http://support.apple.com/kb/ts3297.
    WTH.

  • My iPod touch crashes to the home screen after every song.

    I recently updated my iTunes and the first time I connected my iPod to iTunes it worked fine.
    I connected my iPod for a second time last night and now it says it doesn't recognize the usb device and that another iPod with iOS was connected to this computer or something like that. Now it asks me if I want to restore it.
    I didn't restore it, but since I've then, my iPod crashes to the home screen after each and every song.
    It plays one song, starts another, and crashes.
    Please Help!!

    Hi,
    Try resetting your iPod:  http://support.apple.com/kb/HT1430. 
    Hope this helps! 
    ---likeabird---

  • ITunes stopping sync at every song with an error..

    Got my iPhone back from repairs today and updated it to 5.0.1 and iTunes to the newest version as well, tried syncing all my music back on and EVERY TIME it finds a song which isn't on my HDD anymore or has an error it stops syncing.. what iTunes used to do was just skip them, and list them at the end.
    This is really inconvienent as I'm syncing over 3000 songs onto my iPhone, so having to press 'Sync' after every 100 or so songs it gets really frustrating.. I was hoping I'd be able to just leave it syncing over night but guessing I'm gonna have to stay awake till it's done now, lol.
    Any help fixing this?
    Cheers.

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Multiple airport express plug-ins with i-tunes- lose sound after 4 songs

    I have 3 airport express units, a MacBook and 24" IMAC G5 and my music library on a LaCie external hard drive. I have all the latest updates for the airport software on my computers. Now for the problem
    I want to play my i-tunes library, it is over 500G in multiple locations throughout my house. I play from my I-Mac. All airport express connects to my linksys router network. I get inconsistent results when I play my music to multiple locations. After several songs play I have to go back to my computer and repress the speakers to play even though my imac shows the music playing I get no sound.
    This could be because of a simple setting on my i-mac, I hope so. My energy savings for my screen goes off with inactivity after 15minutes. I changed that to an hour yesterday with no avail. I would love to have my music playing throughout my house on a consistent basis. Please help.

    I forgot to also mention that I use the "interference robustness" feature on my IMAC. I have tried it both ways with the same unhappy results.

  • Daughter's new Mac laptop loses connection after about 15minutes on her apartment cable provider network.  Her roommates older Mac works ok as did my daughters olde MacBook what could Be causing the shutoff?

    Daughters new macBook loses connectivity on wifi at her apartment after about 15 minutes but works fine on other wifi networks. Her roommates older MacBook works fine on wifi as did my daughters older MacBook.  what could Be the cause?---mmannaxx

    Assuming this does not happen at a specific time of day but randomly when ever she connects, she may need to power cycle the modem/router, with the MBP off, after it reestablishes connection and IP addresses, then power up the MBP and reconnect. 

  • Brother wi-fi printer loses connection after Mavericks installed.

    My printer loses it's wi-fi connection after Mavericks upgrade. If I turn off the printer and then re-start, the connection is re-established for awhile.

    I'm having the same issues with my Brother MFC-J6510DW. Worked well for a while but now won't connect to my air or iMac. I've reinstalled all of the latest driver several times now and even when I manually wake the printer up I can't get a connection. I've tried all of the above - DRIVING ME MAD!!!

  • Hyper-V Guest Server 2012 R2 Loses Connectivity Intermittently Every Week

    Hello, 
    We have been having this issue for some time now and getting frustrated. We have a Server 2012 R2 Host running on a HP ML350 G8. It is running a Server 2012 R2 Guest using Hyper-V. The guest OS is attached to its own NIC on the HP Server (which comes with
    4 NICS built it)
    Every week, the guest server seems to lose connectivity to everything. The guest server is still on but all devices on the network can no longer access the shares or even ping the server. 
    To fix this, the ethernet cable of the NIC connected to the guest is disconnected from the switch and then reconnected. The host server is running fine throughout. 
    Why does this keep happening? It seems to happen like clockwork every week Thursday afternoon!

    Hi Sir,
    Based on my experience , first you may need to keep the physical NIC driver up-to-date .
    Also please check if there is "VMQ"/"virtual machine queue" property in advanced properties of physical NICs:
    If yes please disable it for each team member then check the result .
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Ads after every song

    I'm just using the free version right now, but lately I've been hit with an ad after every single song. It's disruptive and excessive, and it's never been this bad before. I'm used to an ad every 5-6 songs. Since I'm not paying for the service right now I have no right to complain, I just want to know if this is the experience that I'm supposed to get, or if there's some sort of bug going on. If free users really get an ad per song like this now, I'm going to have to switch to another service. Thanks for any insight.

    I literally just found myself experiencing the same issue and decided to ping the webz to see if it was just me being paranoid.This is driving me completely nuts - all of a sudden, I'm hearing WAY more ads and commercials than I ever have. I've been using Spotify for a couple of years now, and was even a previous pro user who downgraded to the free version. Having experienced both the commercial-free, as purposefully downgrading to the the "non-pro" WITH commercials, I didn't feel it was right to complain. That said, the amount of commercials I'm getting hit with is aboslutely rediculous. It used to be that I could at least get 5 or 6 songs of a playlist finished before I'd be hit with a commercial or advertisement, but now I can't get through a 6-song playlist without getting 3-5 commercials/ads after each two songs.And they're the same frickin' commericals making me turn my sound down. I can honestly say that, if this is how it's going to be, I'll simply keep turning it down and turning it down until I find an alternate service. And, quite honestly, I know of at least 2 I can go to immediately but thave yet to migrate over because of the extensive playlists I've compiled during my time with Spotify and I really haven't wanted to take the time it would take to get it all setup elsewhere. Again, I'm a long time and devoted follower and I'd rather not move away from Spotify, but I defintiely will if this is what I should be expecting. I've yet to see this issue really addressed, and just wondering if I need to start migrating...

  • Airtunes-disconnects after every song

    Hey,
    I just got my airport express, and it has worked perfectly the past few days, now all of a sudden when a song ends, i have to manually skip songs and it will go 'connecting to remote speakers' and start working again. Its a bit random, sometimes it will stop after 2 songs, but mostly after 1...
    Hoping its just a simple setting?
    Thanks

    Are all the songs in the playlist checked (the checkbox in front of each song checked)?
    Patrick

Maybe you are looking for

  • Logical Database Help

    Hi, If any brother have got the knowledge of LDB then please tell me that how to make a dynamic selection in LDB. Scenerio : in VFV LDB i want to get VBRK-FKDAT (Billing Date) in my ABAP Program, so how to pass this dynamically means by selection scr

  • XDCAM EX files and FINAL CUT PRO

    Has anyone figured out how to use / import XDCAM EX files (shot on Sony EX3) with Final Cut Pro 7.0.1 and OS X 10.6.2 Snow Leopard? I can't get it to work and everything I read so far says Sony won't be releasing a transfer plugin or program that wor

  • Dynamic query report problem

    I have followed the tutorial in on dynamic query and created a region where the type is SQL Query (PL/SQL function body returning SQL Query) The source is declare q varchar2(4000); teatid NUMBER := :P305_TARGET_ID; begin wwv_flow.debug('teatid = ' ||

  • Unable to save serveroutput on command in the glogin file.

    Hi, Thanks for all your reply. I am unable to save glogin file. Please guide me to save serveroutput on command on glogin file. I have shutdown the database even though i'm unable to save it. Please help on this. Thanks Murali S

  • Premiere Pro not starting up

    Premiere Pro CC is not even starting up. I very recently purchased the CC annual subscription and all the other apps are working fine except for premiere pro. It just wouldn't start up. A window comes up saying "Premiere pro has stopped working. Wind