ITunes loses connection to media Folder on Time Capsule

Hi,
I have succesfully moved my iTunes Mediathek to a new Time Capsule.
I changed the place of the media folder to the new destination (Settings-->Advanced).
As long as I don't end my user session, everything works fine. After a new login and after rebooting my iMac, iTunes uses the old location. Then I have to configure the new folder again.
Can you help me?
Greetings from Hannover, Germany
Ulrich

The issue is the TC is slow to start up.. each time you start your Mac.. it will not be able to spin up the TC fast enough to locate the iTunes library so you will get an error and have to manually direct the iTunes to the library.. over and over and over..
The TC is really unsuitable.
But there are suggestions on how to do this.. move the whole application to the TC.. and use an icon on the desktop to start up the iTunes.. I am not sure of the details.. but I have seen the description.. as long as the software starts up from the same place as the library it should work..
Ask in the iTunes section.
There is nothing wrong with the TC .. it is working as it was designed.. as a target for Time Machine.

Similar Messages

  • ITunes Media folder on Time Capsule

    Hi,
    Follow http://support.apple.com/kb/HT1364 instructions, I moved my "iTunes Media" folder to time capsule shared folder.
    There have been no problems for video and mp3s.
    However, I noticed accessing of my iPhone Apps from iTunes library is painfully slow. Just give an idea, "Get Info" on "Angry Birds" takes 30sec to appear, update "Angry Birds" tooks 30min to finish and during the progress the iTunes does not have any response (progress showing "Processing file")
    The problem does not exist on Mac.
    Is this normal?
    Any help will be appreciated.
    Baoshi

    The issue is the TC is slow to start up.. each time you start your Mac.. it will not be able to spin up the TC fast enough to locate the iTunes library so you will get an error and have to manually direct the iTunes to the library.. over and over and over..
    The TC is really unsuitable.
    But there are suggestions on how to do this.. move the whole application to the TC.. and use an icon on the desktop to start up the iTunes.. I am not sure of the details.. but I have seen the description.. as long as the software starts up from the same place as the library it should work..
    Ask in the iTunes section.
    There is nothing wrong with the TC .. it is working as it was designed.. as a target for Time Machine.

  • I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location?

    I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location? If I use add file / folder to library, it scans the folder and then makes a copy of any file that is not in my library in the exact same location; I recal in older versions of iTunes being able to just drag my media folder into my library and it would update missing links.

    Only the songs that are connected to iTunes will be copied when you consolidate to a new folder.
    Splitting the media folder away from the usual location makes it harder to move iTunes in the future.
    Are you go move everything back once you've tidied up or are you going to leave it that way? Either way I'd recommend you create an iTunes folder at the new location, an iTunes Media folder inside that, and consolidate to this new iTunes Media folder. You should also use the option File > LIbrary > Organize Library > Rearrange files in the folder "<Media Folder"> if you have not already done so.
    tt2

  • My iMac loses connection to my AirPort several times a day.

    My iMac loses connection to my AirPort several times a day, and I have to manually select the AirPort each time.  My other devices (laptops, iPads, iPhone) never lose connectivity to the AirPort - just the iMac.  What is going on?  It is just inconvenient to take the extra steps to reconnect my Wi-Fi every time I want to use my iMac.

    Make sure your system is up to date with all available Software Updates since this problem was supposed to have been fixed some months ago, but I understand it remains for some users.
    Assuming everything is up to date, try this: Using the Finder's Go > Go to Folder... menu, open the following folder
    /Library/Preferences/SystemConfiguration
    Drag these three files to the Desktop:
    com.apple.airport.preferences.plist
    com.apple.network.identification.plist
    preferences.plist
    This will only make copies of them. If they still exist in the folder, select each of them and then drag them to the Trash. You will need to authenticate with your Administrator name and password.
    Restart your Mac and log in again. Your wireless network will not be selected automatically, so select it from the Wi-Fi menu. The three Preference files above will be replaced with new ones.
    Use the Mac and determine if this made any difference. If you think it's fixed, you can drag the three files from the Desktop to the Trash. If not, you can always drag them back to the original folder. You will have to authenticate again, and your previous network preferences will be restored.

  • Why won't itunes recognize/play from my library on time capsule

    I have a macbook air running mountain lion 10.8.2
    1 TB Time Capsule
    Itunes 11.0.1
    Iphoto 10.8.2
    Its been my goal for a long time to get all of my music and all of my photos onto the time capsule and be able to pull them up via itunes and iphoto directly from the hard drive.
    ) the new itunes version updated and erased all of my playlists and most of my music/movies/apps etc.         such a nightmare
    ) so since everything was defunct anyway, I move my itunes file over to the time capsule. Changed the reference folder in iTunes preferences
    Keep iTunes Media folder organized is checked
    Copy files to itunes media folder when adding to library is checked
    Then I went to File>Library>organize library
    Then restarted itunes
    ) Itunes doesn’t pull up all of my movies and media still
    ) If I click on a song from the itunes folder on the time capsule – it plays and adds to the itunes screen.  if I drag the whole folder onto the itunes screen, it seems to be busy copying etc. but in the end nothing changes.
    ) If I click on an .m4v file, it doesn’t open with itunes and doesn’t give that as an option. If you search for itunes app to open it, you have to search through folders to find it.   Even after you get it to open in itunes, I don’t think the movie is stay

    You can use the Time Capsule for storage but not as a media Server
    The Time Capsule / Airport with external drive can act as media STORAGE, but neither will run as a media SERVER. You will need at least one Mac running iTunes, with sharing turned on, and/or a media extender program like Null River's Media Link which will create a standard uPnP front-end that a PS3, Xbox or similar can poll.
    A Mac Mini is often used as a media server... but might not be as cost-effective as other solutions...

  • Playing media files from Time Capsule hard drive

    Hello folks,
    I am using my 3TB Time Capsule to host all of my video files, most of which are MKV files. I also have an external hard drive connected to the USB port on Time Capsule and there are few video files on it as well.
    I am using Time Capsule as a router sitting between the cable modem (WAN) and my locan network (LAN). I have an Argosy HV355T digital media player hooked up to my home theater and TV via HDMI. It is connected to Time Capsule via Ethernet.
    On Argosy media player, I am able to connect to Time Capsule (login is successful) but I can neither see the hard drives nor their contents.
    When I connect the external hard drive to the USB port on Argosy, the hard drive is recognized and files from it can be read and played. Thus I have ruled out the possibility of Argosy being unable to read Mac formats.
    I try to use uPnP on Argosy to connect as uPnP client to Time Capsule, but nothing happens. I thought uPnP is turned ON by default on Time Capsule.
    Why am I not able to see the Time Capsule hard drive from my media player?
    What am I missing in my setup?
    Do I need to install a media server device to read files from hard drives and storage, and stream to media player (Argosy)?
    How are you folks using Time Capsule to play video from its hard drive on to TV?
    Thanks.

    I try to use uPnP on Argosy to connect as uPnP client to Time Capsule, but nothing happens. I thought uPnP is turned ON by default on Time Capsule.
    Why am I not able to see the Time Capsule hard drive from my media player?
    What am I missing in my setup?
    Do I need to install a media server device to read files from hard drives and storage, and stream to media player (Argosy)?
    How are you folks using Time Capsule to play video from its hard drive on to TV?
    The TC has no upnp.. no Apple device does.. Apple refused to join and went off in a huff, sat in the corner and created their own.. NAT-PMP.. which as you can imagine.. doesn't work with anything else but Apple stuff.
    So first issue.. no upnp but that isn't a biggie.
    SMB file protocol which the rest of the world uses.. has rules which Apple also breaks.
    Make sure your TC is setup with all short names. no spaces and pure alphanumeric.
    On the file sharing page of the airport utility.. (you may need to use 5.6 from Mac or Windows), ensure that you set a workgroup.. generally now WORKGROUP. And make sure you turn on the guest account to full read and write permissions.
    It would be good to ensure a normal windows computer can access the TC..
    In windows explorer type in the address bar
    \\TCname or \\TCIPaddress (where you replace with actual name or IP).
    I do not know the Argosy player but I will look it up.
    My hacked ATV1 can see and play files from the TC. That is running XMBC of course.

  • There was a problem connecting to the server "AirPort Time Capsule".

    I bought a new Macbook air and a 2TB Airport Time Capsule. I currently use the ATC for time machine, and external storage of Itunes & Iphoto libraries.
    Everything was beautiful until the other day when I got the following :
    There was a problem connecting to the server "Airport Time Capsule".
    The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
    I still have internet connection, and have tried other suggestions across internet but really the only fix has been to power cycle the ATC. This unfortunately is only a temporary remedy for a day or so until it returns.
    Any suggestions on how to fix this problem?

    There was a problem connecting to the server "Airport Time Capsule".
    The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
    I still have internet connection, and have tried other suggestions across internet but really the only fix has been to power cycle the ATC. This unfortunately is only a temporary remedy for a day or so until it returns.
    Any suggestions on how to fix this problem?
    There is no fix.. I have written a bunch of suggestions to try.
    https://discussions.apple.com/thread/6106750?tstart=0
    It is very common on Mavericks.
    How long did it take from when you set it  up till it went bad??

  • Can I connect my iTouch to the Time Capsule?

    I am hoping to connect my iTouch to my Time Capsule, so the iTouch will sync with iTunes via the network.  Is this possible?  I have attached the iTouch to the Time Capsule USB port, but when I open iTunes, my iTouch does not appear.
    I contacted Apple Support a few weeks ago about this.  The suprisingly unhelpful fellow said that it was not a Time Capsule issue and that if I wanted help, he could redirect me to the iTouch support contingent.  If he transferred me, though, he warned, I would have to pay a fee because my iTouch was more than 90 days old.
    Honestly, I was miffed!  I would think Apple Support would help me connect other Apple peripherals to an Apple peripheral, for the Time Capsule is only 1 month old and eligible for free support.
    But enough ranting, any advice?

    There are so many ideals in our worlds, aren't there?
    Another question you could perhaps help me with.  I am using my TC as an external hard disk as well.  I will want to purchase another hard disk to back up the data on the TC.  A 500 GB disk will do.  Should I get one with an external power source?  Or a plug-and-play?
    I tried to do this with an older hard disk drive, but the TC would not recognize it.  I was able to do a back-up by connecting the TC by ethernet cable to the computer and the hard drive by USB to the computer.  But I'd like to get a drive that the TC will recognize and use CCCloner to back up automatically my files on the TC to an external hard drive.  I would like to connect the hard disk directly to the TC via an ethernet port or the ideally-and-sensically-free USB port.
    As a test, I just plugged a USB key into the TC, but the TC does not recognize it.  When I plug it into the MacBook, the MacBook does recognize it.  It is formatted as FAT32.  I am nervous about purchasing a disk that the TC won't recognize. 
    Thanks again for your help!

  • Can iTunes Match download files from a crashed time capsule retroactively

    Ok, so I'm a devoted itunes / apple user.  I had my time capsule for 2+ years with no issue, but it recently died and I had to get a new one.  Unfortunately, I had my iTunes library pull from the time capsule instead of my laptop hard drive and now a lot of my music is lost.  I can get anything that I had originally purchased via iTunes with iCloud download, but anything burned / ripped to the library is lost.
    The track names, album names, etc. are still listed in itunes when I open it, but it cannot access the folder to pull the audio.  My question, is there a way to access these files since they are in my library without having to hunt all of these down and ripping them again?  If I were to purchase iTunes Match, would it download these files so that I could have them without doing the hunting and ripping?

    Hi,
    No.
    If you have no back up you will need to re-rip them. You cannot use match to retrieve music that is not on your computer or external hard drive.
    Match can only scan the music that is in your library.
    Jim

  • Do I need to setup my AirPort Express on a modem before trying to connect it wirelessly to my time capsule existing network?

    I have an airport express that I used in another location.  I brought it home and want to use it with my existing network and time capsule to do AirTunes.  I can't get the Express to show up in my airport utility to even set it up.  Do I need to connect it to my time capsule with an ethernet cable first to configure, or should it be showing up as a device to add to my network automatically?

    1. i would restore the express to factory defaut by holding the reset button on the unit with a paperclip while you are powering it on
    2. if it restored, you should be able to see it in your wifi icon at top of screen as "airport express"
    or you can see it in airport utility
    3. then if you want to connect it wirelessly to your time capsule, you would choose "extend network" and put in relevant security and password....this would make the express a wireless access point, fed by your time capsule(main router)
    if you chose to do it wired which is a better way if you have access to ethernet port at wall, you would choose "create a wireless network" and then under the "network" tab you would choose "Bridge Mode".....this would make the express a wired access point, fed by your time capsule(main router)

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

    I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8)  and Tme Capsule(7.5.2). Browser is Safari 5.1.
    When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
    It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
    Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
    Thanks.

    The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
    So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
    Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

  • My PC cannot see a hard drive connected by usb to my Time Capsule!

    Help please.
    My PC cannot see my Toshiba hard drive connected by usb to my Time Capsule. I can see the hard drive in Airport Utility. I suspect my problem may be to do with either setting up File Sharing or else mapping............if anyone can help fix this it would be most appreciated! Thanks.

    Wins server is useless.. you won't have one..
    Did you turn on the guest account with full read and write permissions.. ??
    Can you ping the TC ip address??
    Is the airport utility on the windows machine??
    Do you have a mac to access the drive?
    Is it real fat32 or some strange exfat which won't work?
    I also wonder if it should not be formatted on directly on the TC.. or on a Mac and formatted GUID not windows type.
    Sorry not all of this is logical..
    If you can access the internal disk from windows.. how are you doing that??
    If the external USB drive is not working.. plug it straight into the windows machine and enjoy faster better and more consistent file copying..
    Share it to the network if you want network access.

  • Trying to Connect Wireless Epson Printer with Time Capsule

    Greetings. I am a regular Mac user and using Mac for several years now. However, I am a new to network administration. I have a Linksys wireless router that syncs our 5 Macs (one iPad-1 iMac and three MacBook Pros), plus 4 Windows PC's we have in our network. I recently decided to purchase a Time Machine, and further our use of Apple technology in wireless devices. I want to back up all my computer's files to Time Machine and use the Airport Extreme functions of Time Machine while discontinuing the use of my LinkSys router. However, I can't get my Epson WorkForce 600 to wirelessly connect to Time Capsule in order to use the scanner & fax functions. Connecting the printer by USB enables the printer function, but disables all other functions of the printer (fax-scan, etc.).
    I tried downloading new Epson drivers and couldn't get some of them to install. This time My iMac wouldn't install the .dmg files. I tried opening the .dmg file and installing. The pop up box requiring my administrator password, kept flashing when I tried to enter my password. Since I couldn't get the .dmg files to install, my plan to update Epson driver's didn't work. Question #1: I am looking for advice how to install these weird disk image files ?
    I turned off my Time Capsule, re-connected the LinkSys to the cable modem and all my wireless functions work again, especially my printer. Sadly, no Time Capsule.
    I read another discussion suggestion connecting both wireless devices together. I assume since I want to use Time Capsule that I set it up with the modem and connect the other router to it via one of the four ethernet connections. I didn't want to try this until I received further advice. I am hoping I can connect my LinkSys router to Time Capsule and use the printer through the LinkSys connection with all other computers on my network.
    Question #2: How can I get my Time Capsule to find the Epson so I can use it again, or should I just use the LinkSys router connected to the printer?
    Thank you in advance for help.

    This sounds as if you are trying to use instructions that are more than 2 years old at this point, but you are using a new version of AirPort Utility Utility in Lion or Mountain Lion....which would not track or apply to the older instructions.
    Can you confirm what operating system that you are using on the Mac that is being used to configure devices?
    The new AirPort Express will connect directly to the Time Capsule using an Ethernet connection, correct?

  • There was a problem connecting to the server "Max Time Capsule"

    Disclaimer:  Previously posted here (Ask Different) and similar to this.
    I'm trying to use my MBP inside and outside my office, and having it backup to my 2TB Time Capsule when on its wireless network, or defer backups when not on the Time Capsule's wireless network.
    Unfortunately, if I've been on a different wireless network for a few hours worth of backup attempts, bringing the machine back onto the Time Capsule's wireless network doesn't resume backups, and Time Machine never recovers. I can select the disk as a backup drive in the Time Machine preferences, but the disk remains unavailable from the Finder, and any backup attempts yield the standard:
    There was a problem connecting to the server "Max Time Capsule"
    Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator.
    My WiFi connection is through the same Time Capsule that hosts the backup drive, and its name and IP address have decidedly not changed. The only thing that seems to help is restarting the Time Capsule, but that is an inconvenient workaround at best.
    The problem sounds similar to Backup Disk Not Available, but the answers to that question are either to restart or change the disk name or turn off the 5 GHz network (which didn't help). I also looked at /Library/Preferences/com.apple.TimeCapsule.plist, but found nothing that seemed relevant.
    Any suggestions would be greatly appreciated. My MBP is running OS X 10.7.5, and the Time Capsule firmware is 7.6.1.

    There was a problem connecting to the server "Airport Time Capsule".
    The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
    I still have internet connection, and have tried other suggestions across internet but really the only fix has been to power cycle the ATC. This unfortunately is only a temporary remedy for a day or so until it returns.
    Any suggestions on how to fix this problem?
    There is no fix.. I have written a bunch of suggestions to try.
    https://discussions.apple.com/thread/6106750?tstart=0
    It is very common on Mavericks.
    How long did it take from when you set it  up till it went bad??

Maybe you are looking for

  • Firefox will not open up. It gives me the choice to reset firefox or open safe mode. reset firefox does nothing and safe mode just continues to load .

    When it is in safe mode the wheel just spins and nothing happens. When reset firefox is selected nothing happens. I have erased firefox and redownloaded it many times and the same thing occurs.

  • Session pooling and statement handles

    Hi there, I have a large multi-threaded application (perhaps >100 threads). Each thread is continuously processing events (very high volumes) which involves some manipulation and some database operations (from a fixed set of possible operations). I a

  • Email photo as attachment

    I email photos all the time out of iPhoto.  Sometimes people (usually on PC's) cannot retrieve the jpg as an attachment.  It is embedded in the email and they can't remove it or download it.  I have tried emailing it directly from iPhoto or starting

  • Some caching issue

    Good morning fellow experts! I'm having some issues with my caching while trying to check polling table functionality. Main issue being is that cache isn't getting populated (so I can't really check the polling table). However, the requests and dashb

  • DataLine isRunning() always returns false for mp3 files

    Running JDK 1.5.0-b64 on Win 2K and XP. Using the sun mp3 plug-in. Everything works except the DataLine.isRunning() method always returns false. For other file types (e.g. WAV) isRunning() returns true/false values as you might expect. Anybody else h