Itunes messages "Could not enable ssl"

When I connect my iPhone, I get lots of "could not enable ssl" messages in the message log. However, sync does work. The sender pid is [0x0-0x7c07c].com.apple.itunses[1087]. Any idea?

Some more information on your computer might help you get an answer, like what Operating System you run and your software version, but also if you turn off Parental controls it sometimes solves the problem. Hope I helped!

Similar Messages

  • Installing iTunes,,,message could not writte value key

    Tring to install iTunes,,,message ,,,,,could not write value key        Software\microsoft\windows\currentversion\explorer\Autoplayhandlers\handlers\iTunesburnCDonArrival
    need sufficient access to that key
    How can I get this program to install?

    Denn.
    Look here.
    https://support.apple.com/en-us/HT203460
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Kernal message: Could not enable ARP cache poisoning detection.

    Looking at system files in Console, for another issue, I came across this kernal message, which occurs at start-up: "*Could not enable ARP cache poisoning detection. Your computer will not be protected*."
    It's an intel Mac Mini running Leopard ( 10.5.8 ). I have Norton Antivirus for Mac 11 installed (I know, I know), which has ARP cache poisoning turned on in its "vulnerability protection" prefs. I've gotten no warnings of attacks from Norton, just this Kernal message at start-up. I've seen this issue on a couple of other threads with no answer or solution (except advice to Google it... duh!), already archived and accepting no new posts... so no help there.
    Is this ARP cache poisoning detection part of the OS, and if so, why is it not being enabled? Is there a way to enable it? Could the kernal message be telling me that the Norton protection is bugged and not working, or would it be OS related. The mini is a wired connection (ethernet), and there's one other laptop (macbook 10.4.11) using the modem/router ( Actiontec GT 701-wg) via wireless airport. I haven't seen this message on the laptop in console or system logs, but haven't looked hard.
    Someone, please respond with a knowledgeable answer, for me and for others who've asked here and on other forums with no helpful public answers given.

    Doing a "erase and install" of Leopard, thus dumping Norton AV 11, and then installing Snow Leopard... I haven't seen this Kernal message come up again, yet. I'll assume it was some buggy Norton related thing that cropped up after an OS update, but who knows. I'll leave the question open for a bit, in case anyone else has had this issue and found a reason or solution, and wants to share.

  • Could not enable SSL - Cannot sync Contacts and Calendar

    This happens again and again ...
    I notice the following in the Console:
    .........../System/Library/PrivateFrameworks/MobileDevice.framework/Resources/Ap pleMobileSync.app/Contents/MacOS/AppleMobileSync: Could not perform SSL handshake\n
    Does anyone know what this is?

    Thank you. I read that thread too. But it's not really solving my problem. This thing keep coming back. I'm sure there are some experts out there who would know what these mean, even if without a solution, I wish to understand my own problem better.
    Thanks again.

  • Could not create SSL/TLS secure channel.

    I have an application thats uses a third party service (so i have no control over it).
    In order to authenticate i have a pfx cert with a private key.
    I click the URL to access the service and IE tells me the page is not found.
    I import the pfx cert using all the default settings (automatically select the store etc) and inserting the private key password provided.
    Click the same URL and i can access the site and its services.
    Everything now works as expected locally.
    I move this application to a Windows Server 2008 R2 after hosting in IIS and followed the above steps except i get the error message "Could not create SSL/TLS secure channel.". So i followed all the related articles but non seem to work which leaves
    me to believe this is a server issue/configuration that needs to be carried out in order for it to work.
    The issue is im not sure where to start as ive looked at the event log viewer and nothing is listed in either Application or Security to narrow down the problem. Could anyone assist on how to resolve this issue?
    Thansk

    In IE i see a certificate listed for the site i require access.
    [quote]
    Which application are you using?
    Have you consult with the manufacturer of this application about this issue?
    What's the purpose of this certificate? Server authentication or client authenticate?
    Also, the certificate is issued to specified computers or users, please make sure the computer name is matched with the information of the certificate. [/quote]
    Im using an ASP .Net app. Manufacturer consulted - issue with server config.
    Going further i used an admin account for the application pool and everything worked straight away.
    I went one step further and used httpwebCertcfg assuming that would resolve the issue but hasnt.... i didnt wanna continue running further commands (i ran the command on
    local machine/Current user on the Personal store for users IIS_USR, Network service which resulted in the same issue)
    So question now would be how to give access to whatever for the app pool user which is currently set as ApplicationPoolIdentity?

  • Windows XP Mode - Could not enable integration features

    Hello!  Let me start off with saying that I'm not very computer savvy, so please be gentle!  :) 
    So here my problem.  I have scoured forums all morning looking for a solution and have tried many things and nothing has worked yet.  I have Windows 7 Pro.  I use the Windows VM to run in XP mode so my small business programs will
    operate correctly.  This morning VM would not open.  I click to open Windows VM, it take unusually long to attempt to open.  After 5 or so minutes error message - Could not enable integration features with details stating .  It gives me
    an option to retry or continue.  When I hit retry, it does so but the ending result is the same error message.  When I click continue it states the operation has failed - the VM is not running. 
    What I HAVE tried-
    -Reboot
    -Clicked start>windows virtual pc>open windows virtual pc>right click settings
              - From this point I have tried to shut down from the close option as well as uncheck enable integration features at start up. Status is in Hibernation and has not changed. 
    Your help will be greatly appreciated.  Thank You 

    Bob, I have read as much as I can find on this problem (Enabling Integration Features and having it remain enabled), and your responses are the most straight forward, complete and seem to have helped a number of others. So, I'm adding to this discussion,
    instead of starting a new discussion, so that I can get YOUR response.  
    I am running Windows 7 Professional on a Dell Precision M6500 laptop with an Intel Core i7 processor and 8 Gb of memory.  When I first setup the laptop I installed Windows Virtual PC and XP Mode, after downloading from the Microsoft.com
    website.  While the installation went without an error, getting to use it was a major, and long problem.  I have one (very) old planner software app that I've been using since the mid 1980s. Being somewhat stubborn, I refused to change to a newer
    app. So, I installed the app under XP Mode (it doesn't run under Windows 7) and it worked fine.  I then tried to setup the printer and the Guest PCs drives (some USB).  I followed the Microsoft instructions and suggestions I found in forums. 
    I finally gave up and called and paid for Microsoft tech support.  Many weeks and we finally got it working - was able to print to my wireless printer from XP Mode and was able to backup my data to the Host PCs USB drives (I make three copies of the data
    on a daily basis, so I actually have 21 copies of the data after a week).  When we got it working I never had a problem with Enabling Integration Features, before it would disable Integration Features after I enabled them, repeatedly.  Then a Windows
    7 upgrade hung - 8 hours and the PC hadn't shut down.  I powered off the PC and then powered back up.  I got a blue screen error about CPU being too hot and the PC shut down. It was no hotter than usual. Powered up again and all seemed fine, until
    I went to start XP Mode and my planner.  XP Mode was trashed, wouldn't start.  Tried to reinstall and still had the same problem.  So, another call to Microsoft Tech support and another fee. Interestingly, the fellow that I worked with this
    time as a level higher and knew the first tech I worked with.  A few days and XP Mode was back running and the environment was actually as it had been when the PC crashed (the VHD file was still there and had my original environment - settings, programs,
    printer and drive mappings - all in place, this file is in the same location as the VSV file).
    Long winded background to my current, repeated problem. Integration Features will no longer stay enabled.  While I don't recall a "crash" or "hung" PC, my notes are all in that planner app in XP Mode and I can't get to it.  So,
    I uninstalled VPC and XPM and reinstalled from scratch. Reinstalled my planner app, configured and tested my printer and host drives (didn't map them, just access them from My Computer).  Suddenly (as I said, I can't recall anything going wrong to trigger
    the repeat of this problem) Integration Features will not enable.  I've deleted the VSV file and the problem still exists. Just "Shutdown" XP Mode and 50 Windows XP updates were installed.  Then installed 48 updates. It worked for one afternoon and
    evening. Booting the laptop this morning and Integration Features again is unstable. One more Windows update was installed.  Then I followed your suggested steps:
    Delete the" Windows XP Mode.vsv" file in the folder
    C:\users\[your user name]\appdata\microsoft\Windows Virtual PC\Virtual Machines.
    That should then allow XP Mode to start correctly.
    Have you uninstalled, rebooted XP, and reinstalled the Integration Components?  All of this occurs in XP Mode not on Win7.
    1. Uninstall the Integration Components in XP Mode from Add/remove programs
    2. Reboot XP Mode
    3. Reinstall the Integration Components in XP Mode from WVPC menu.
    The laptop is also in the same Workgroup as the Host PC and all the other PCs on my LAN.
    Any suggestions?
    Where can I find the following folders from XP Mode on the Host PC:
    C:\Documents and Settings\All users\Documents
    C:\Documents and Settings\XPMUser\My Documents
    I created folders in both with the backed up data and programs from my planner app and would like to have access to them from the Host PC.
    I'm just about at the point of abandoning XP Mode and looking for an alternative Virtual Machine app, just using Outlook, or getting the Outlook app from the original software provider of my planner app.  All of these options are less
    than ideal, but Microsoft's XP Mode has also become less than ideal.
    TIA
    Neil Cook

  • Why do I get the error message "iTunes Match could not download because disconnected from network?  I'm connected to the internet during that time with Safari so am I not connected to the network?

    Why do I get the error message "iTunes Match could not be updated because you were disconnected from the network during processing."  I'm on the internet during all of this.  What disconnect is the message referring to?  Itunes is frozen now.  I keep clicking OK but it just comes back with no action.

    Hello FredJay,
    Thank you for contacting Apple Support Communities.
    iTunes Match needs a network connection to work, either Wi-Fi, cellular or wired. See the following:
    Make sure you have an active Internet connection
    Be sure your computer or device has an active Internet connection by loading a webpage using Safari or another web browser.
    On an iOS device with cellular support, if you are not on a Wi-Fi network, try enabling 3G cellular data1 for iTunes Match.
    For iOS 6, tap Settings > iTunes & App Stores > Use Cellular Data > On
    For iOS 5.1.1 or earlier, tap Settings > iTunes & App Store > Use Cellular Data > On
    1Fees may be associated with downloading over cellular networks; contact your wireless carrier for details.
    From:
    iTunes Store: Troubleshooting iTunes Match
    http://support.apple.com/kb/TS4054
    Regards,
    Jeff D.

  • I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any

    I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any tips on how to solve this problem?

    If doesn't work try use the instructions below BUT in BOTH folders, first in SourceList and after in the Media.
    Start>Run put regedit and press Ok.
    1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
    2. Right click in Media folder, select Permissions from the menu.
    3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
    4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
    5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
    6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
    7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"

  • I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • I am having trouble re insalling itunes i get the message "Could not access network location %APPDATA%|.

    Help  can't install or uninstall itunes keep getting the message " could not access network location %APPDATA%\, "

    And follow this:
    http://support.apple.com/kb/HT1925
    Apple moved some drivers for 64-bit now to where they should have been.
    Quicktime also use to place files outside the norm.
    One of the reasons I recommend when it comes to Apple:
    Wait for the ".1" and always use the uninstaller first and then install.
    That means you may want manual standalone installer instead - and that way you have 10.4.1 in case you need to later downgrade.

  • My partner deleted my itunes (10) library. I use a WD external back-up and retrieved my itunes library, but when i try to play a song i get the message 'could not be used because the original file could not be found Would you like to locate it?'

    My partner deleted, by accident my itunes library. I have an iMac 10.6.7, Itunes 10. I use an WD passport as an external back up and retrieved my itunes library but now get the message "could not be used because the original file could not be found. Would you like to locate it?" so itunes is not recognised the exclamation marked songs, how do i get the retrieved files recognised. At times I get fed-up with Apple blocking files being used, although I like the product its restrictions are so silly!

    You not only have to retrieve the library file from the backup drive but the actual music files (usually stored within the "iTunes Media" folder) as well.

  • HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

    I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

    What version of iTunes are you using?  The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
    B-rock

  • Itunes will not open, error message reads: The iTunes application could not be opened. An unknown error occurred (13014)

    iTunes 10.4 will not open on my macbook, error message reads:
    The iTunes application could not be opened. An unknown error occurred (13014).
    It won't let me delete and re-install either, thank you for any help!

    are you running any anti virus software on your machine ?

  • I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

    I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

    Try removing the Genius database.  In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

  • I cannot open my Itunes? I keep getting this message: "The Itunes app could not be opened. An unknown error occurred. (-50) Help! I have also tried to uninstall and reinstall, but get the message that ITunes.msi cannot be found.

    Why am I getting this message when I try to open my ITunes: "The Itunes app could not be opened. An unknown error occurred (-50)."?

    http://support.apple.com/kb/TS3694#error14
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

Maybe you are looking for