ITunes missing from Media Browser -- "open itunes to populate list"

I am on a MacBook Pro 10.7.3 running GarageBand '11 6.0.4 and all of the sudden no tracks will display under Audio in the Media Browser (Photos and Movies still appear). No tracks from either iTunes or GB show up. This is confusing as I have been using GB to make podcast/music mixes for more than 5 years and I haven't changed any settings or done anything different, but now I get the message "open itunes to populate list" or "To see GB songs here, open GB to edit and save your music."
Also, for quite some time I have been unable to go the alternative route of dragging tracks directly from iTunes and dropping them on to the timeline in GB -- that used to work, but mysteriously stopped, so I am dependent on the Media Browser for importing music.
I read thru the forums and tried the advice given to someone this was happening to in Final Cut -- recreating iTunes .xml file. Did that, still no tracks display.
Other advice says to reinstall GB or iLife altogether -- I hope to avoid this, but if I need to go this route, how do I reinstall GB w/o a disk? Can I do it through App Store and will it recognize that I have already purchased it?
I am dying to be able to get back in to my music mix making in GB, so thanks in advance.

moontroll wrote:
unable to go the alternative route of dragging tracks directly from iTunes {...} I am dependent on the Media Browser for importing music.
another way:
http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
(Let the page FULLY load. The link to your answer is at the top of your screen)
moontroll wrote:
how do I reinstall GB w/o a disk?
you can't, you'd need to find the DVD
moontroll wrote:
Can I do it through App Store and will it recognize that I have already purchased it?
no, it'll only recognize your purchase if it was through the app store

Similar Messages

Aperture is missing from media browser!

All of the sudden, aperture went missing and I cannot seem to get it back! Anybody please help!

Check this link for a possible solution.
http://www.it-enquirer.com/main/ite/more/iwork08_mediabrowser/

Under SHARE, IDVD is grey, what step am I missing? Only MEDIA BROWSER and ITUNES is active?

I'm unable to SHARE my IMOVE since IDVD is grey and not active, only MEDIA BROWSER and ITUNES. I'm using ITUNES '11.

Hi
A. I don't know
B. I think that THERE ARE A MUCH better choice to do - ! ! !
As Share to Media Browser is OK
(I NEVER use Share to iDVD from within any iMovie versions as the result will be bad to even worse)
Use this and Share as LARGE (Not HD - also degrading result)
Now Close iMovie and Open iDVD and Import movie from Media Browser - This will result in as Good result possibly when movie comes from iMovie'08 or 09 or 11.
If You want even better result then use
• iMovie up to HD6 - or -
• FinalCut any version
So that the material exported over to iDVD is fully interlaced - as DVDs are so and as SD-Video quality is so as Standard. (There are no HD-DVD quality (but academic - very rare and needs special players))
Yours Bengt W

Media Browser and iTunes Screensaver Unable to See Through Aliases

My iTunes library is on a shared Airport disk. In Tiger I used an alias from ~/Music to the shared library. This worked better than pointing iTunes itself straight at the shared library because the media browser and iTunes screen saver continued to work as expected.
Not so in Leopard. When my iTunes library is an alias the media browser refuses to see it and suggests i launch iTunes 6 or later. Similar for the iTunes screen saver.
Does anyone else experience this, and does anyone know any workarounds? I miss browsing my iTunes libray from iPhoto.

docjj
If you have 64 bit Windows and daemon, you have a little work to do.
You need to install the 64 bit Gear drivers that iTunes needs for burning but are not supplied:
http://www.gearsoftware.com/support/drivers.cfm
For advice on Deamon, see this:
http://gearsoftware.com/wiki/index.php?title=SPTD_Drivers
You may also run into a problem with your CD configuration folder, if you do see this thread:
http://discussions.apple.com/thread.jspa?messageID=5324081&#5324081

Media Browser to iTunes

I know how to transfer a movie from iMovie to the Media Browser, but how do I then transfer the movie from the Media Browser to iTunes for adding to the movies collection on my iPhone?

TerrySteven wrote:
.. but how do I then transfer the movie from the Media Browser to iTunes for adding to the movies collection on my iPhone?
you don't share via Media Browser to iTunes..
there's a separate 'Share/iTunes'-feature in iMovie..
and Welcome, TerrySteven, to the  iMovie boards..

IMove 09 just keeps crashing when I try to share it in Media Browser or iTunes etc

Can anyone help ?
iMove 09 just keeps crashing when I try to share it in Media Browser or iTunes or iDVD.
I have plenty of space on my HD
Model Name:          iMac
Model Identifier:          iMac10,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Thank you
Les

Locate and move the com.apple.iMovie.plist and com.apple.iMovieApp.plist.lockfile files to the Desktop, launch iMovie and try again. If that corrects the problem you can delete them from the Desktop.
They will be in your Home/User/Library/Preference folder.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT

After I install Itunes 10.5.2 and open itunes a window opens stating another program is not allowing itunes to burn cd's. Next, I get an error window stating itunes 42404 is missing. I've uninstalled itunes 3 times and re-installed. No luck.

After I install iTunes 10.5.2 and open iTunes a window opens stating "The registry settings used by the iTunes drivers for importing and CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." This happens everytime.
After that on one occasion a window stated "Itunes msi) was missing. Upon uninstalling and reinstalling that disapeared. Now I get a window stating, (A required Itunes component is not installed. Please repair or reinstall Itunes.(_42404)"

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

Music is missing from Media files

So I have many CD's I have copied to iTunes. I copied them years ago. I'm now trying to copy some of the music files from media to my phone (non-Apple) which requires me to do it from the media file location on my windows.
I noticed music is missing from my music on iTunes. I have not found a way to update/backup whatever to get the missing music to the media files?

"Not sure how or what caused the Compilations folder in the file path."
iTunes will put any songs for which the "Part of a Compilation" flag is set into the Compilations folder. Unless you have an older type of iDevice there's really no need to ever use "Part of a Compilation" (and even if you do, its only necessary for "Various Artists" compilations). In this example, if you select the album in iTunes, right-click > Get Info > Summary tab and set Part of a Compilation to "No" (and assuming that you have configured iTunes to manage your library) the media will be moved to C:\Users\RS Desktop\Music\iTunes\iTunes Media\Music\.38 Special\Flashback_ The Best of .38 Special.
"So after I moved a few songs over, went to iTunes to play. It says it can't locate the songs."
Ah, that may be the problem ... based on what you're reporting you have these two options set under Edit > Preferences > Advanced:
This means that iTunes determines where to store media based on Artist and Album information - if you start moving files around yourself it will inevitably lose track of it (indeed, iTunes lacks any capability to keep track of media when moved by anything else, irrespective of its settings).
"How do if I click on a song a pop up asks if I want to locate, then I can go to the media files folder and get the song, but that if individually."
iTunes does sometimes automatically fix related links when you do this - however, it can't be guaranteed to do so and there is no "bulk fix" capability built into iTunes itself.
If possible, restore your iTunes Media using a backup taken before you started moving files around. Turingtest2 has a useful script (http://samsoft.org.uk/iTunes/scripts.asp#FindTracks) that may help to resolve further issues (as always, before you start running any scripts that may modify the content of your library take a backup first).

URL missing from Media tag

I am trying to stream a live video from Adobe Media Server. I am sending a video to the server from Adobe Flash Media Encoder 3.2. On Adobe Media Server I open the sample video player (videoplayer.html) in a browser. In the STREAM URL field I put: http://localhost/hds-live/livepkgr/_definst_/ liveevent.f4m. When I click the PLAY STREAM button I get the error message: URL missing from Media tag. What do I need to do?

What is the stream name that you are publishing from FMLE? If it's "livestream?adbe-live-event=liveevent" then the url should be http://localhost/hds-live/livepkgr/_definst_/liveevent/livestream.f4m .

I just downloaded the latest itunes update and I cannot open Itunes. Any suggestions?

I just downloaded the latest itunes update and I cannot open Itunes on my Imac. Any suggestions? I have OS 10.6.8

Hello, I am quite new on these forums, and mainy joined because have problems with latest update of iTunes, which seems to have caused problems of one kind or another for various people. I think basically people are now waiting for a 'patch' from Apple to fix things.

ITunes Error -600 (Can't open iTunes) Help!

Tonight I was working with my iPod and iTunes on a Mac; I ejected the iPod, but a static message on iTunes had locked it up. The message was that the iPod was updating. I finally was able to force quit iTunes, but now I cannot open iTunes from the Dock or Finder.
The message I get is: The operation could not be completed. An unexpected error occurred (error code -600). Has anyone got a solution? Please?
iMac Mac OS X (10.3.9)

Hi Jase,
without beeing pedantic, this is a the itunes for Mac, so you might post your question on the itunes for window,
when you go on itunes and check your purchase history, you have the option to report a problem related to your purchase, ok also i supposed you have quicktime, yes. It will be helpfull if you had in your profile the version of your application itunes 7 or quicktime etc...
the code error seems to be associate with "service unavailable".
hope it help

Need to re-add computer to iTunes Match each time I open iTunes

Every time I start up iTunes (10.6.1.7) on my Windows Desktop PC (Windows 7 Home Premium, Service Pack 1, 64 bit), I see the cloud with lightening bolt icon next to the music item in the iTunes Library indicating that iTunes is not connected with iTunes Match. I am able to work around the issue easily enough by clicking on the store menu, turning off iTunes Match, and then turning iTunes Match back on (and entering my Apple ID password and waiting a few minutes for iTunes Match to redo the initialization process). I would like to actually solve the problem instead of having to work around it every time I fire up iTunes. Any recommendations?
Thanks!

I have iTunes 10.6.1(7) 64 Bit on OSX Lion 10.7.4 and I have to log into and resetup iTunes Match every time I open iTunes after I have restarted my Mac.

F4M document contains errors - URL missing from Media tag

I feel like I'm getting close to finally get a live stream to work correctly in 4.5
I can see the streams being recorded in the following directories
     C:\FMSHOME\applications\livepkgr\streams\_definst_\liveevent1
     C:\FMSHOME\applications\livepkgr\streams\_definst_\liveevent2
     C:\FMSHOME\applications\livepkgr\streams\_definst_\liveevent3
Each directory contains five files: bootstrap ,control, meta, f4f, and f4x.
I have a single file called Event.xml in the directory: C:\FMSHOME\applications\livepkgr\events\_definst_\liveevent
<Event><EventID>liveevent</EventID>
<Recording>
<FragmentDuration>4000</FragmentDuration>
<SegmentDuration>16000</SegmentDuration>
<DiskManagementDuration>3</DiskManagementDuration>
</Recording>
</Event>
However the client player receives the exception F4M document contains errors - URL missing from Media tag.
If this file is dynamically generated on the fly by the server what do I need to change to resolve this issue?
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
            codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab##version=10,0,0,0"
            width="600"
            height="409">
            <param name="movie" value="StrobeMediaPlayback.swf"></param>
            <param name="FlashVars" value="src=http://myserver/hds-live/livepkgr/_definst_/liveevent.f4m"></param>
            <param name="allowFullScreen" value="true"></param>
            <param name="allowscriptaccess" value="always"></param>
            <embed src="StrobeMediaPlayback.swf"
                   type="application/x-shockwave-flash"
                   allowscriptaccess="always"
                   allowfullscreen="true"
                   width="600"
                   height="409"
                   FlashVars="src=http://myserver/hds-live/livepkgr/_definst_/liveevent.f4m">
            </embed>
</object>
Thanks Again!
Dave

I will suggest you to go through this doc for complete implementation details. It is pretty comprehendable and would help you understand http live streaming better.
http://help.adobe.com/en_US/flashmediaserver/devguide/WSeb6b7485f9649bf23d103e5512e08f3a33 8-8000.html#WSd391de4d9c7bd609a95b3f112a373a7115-7ff6.
As per your questions -
1. "I try to access the stream using the local player at http://localhost/hds-live/livepkgr/_definst_/liveevent/livestream.f4m" - This should be http://localhost/hds-live/livepkgr/_definst_/liveevent/liveevent.f4m.
     The name of the f4m is the name of the event you are referring to. In your case, the live event - liveevent is associated with all your three livestreams- namely livestream1, livestream2. livestream3.
2. "Do I need to create BOTH a 'manifest.xml' and a 'event.xml'? And do both of these files need to be in the event directory like below?" - Yes. If you are using mbr you need both these files at the exact place you mnetioned.
For simple single bitrate streams, mainfest.xml file is optional.
3. "If I need to manually create a manifest.xml file would this file and directory be correct?" - Yes, you are right on track. Create the file Manifest.xml and place it inside events directory at the place you mentioned.
4. "Do I need to use a absolute url in the streamid field in manifest.xml to resolve the error msg 'The F4M document contains errors URL missing from Media tag'?" - No. This is not needed. StreamId is not the content path, that is taken care of by the url path in the output manifest. You streamIds will be - livestream1, livestream2, livestream3.
After all this, I would suggest you to check one more thing. If you are publishing the way you mentioned above, there would be '.stream' files (For eg - 'MTYxMjAzMzAzMg=.stream' ) created in your events folder - "C:\FMSHOME\applications\livepkgr\events\_definst_\liveevent\". You should check that there are 3 and only three files formed. It somehow happens that when you publish and republish again without deleting these files, FMS creates multiple copies and tries to map each one to the actual content written at - C:\FMSHOME\applications\livepkgr\streams\_definst_\livestream1\ etc.. So there should be three files and each one should point to one of the streams directory. If there are more, please delete these files, delete your hds streaming content (if possible) and republish again the same way.
This should solve your problem. If still you are facing some issues, do let us know.
Thanks,
Apoorva.

OSMF Player Error: URL missing from Media tag - HTTP Live

When I try to play an HTTP Live Stream using OSMF Player, I get "URL missing from Media tag" error.
I installed Flash MS4.0 with Apache2.2.
My live manifest file (f4m) is below.
http://localhost/live/events/livepkgr/events/_definst_/liveevent.f4m
<manifest>
<id> livepkgr/events/_definst_/liveevent </id>
<mimeType> </mimeType>
<streamType> live </streamType>
<duration> 0 </duration>
<media streamId="livestream1" bitrate="100">
<metadata> </metadata>
</media>
<media streamId="livestream2" bitrate="200">
<metadata> </metadata>
</media>
<media streamId="livestream3" bitrate="350">
<metadata> </metadata>
</media>
<bootstrapInfo profile="named" url="../../../../streams/livepkgr/streams/_definst_/livestream%i1/livestream%i1.bootstrap" id="bootstrap2386"></bootstrapInfo>
<media streamId="livestream%i1" url="../../../../streams/livepkgr/streams/_definst_/livestream%i1/livestream%i1" bootstrapInfoId="bootstrap2386">
<metadata>
AgAKb25NZXRhRGF0YQgAAAAAAAhkdXJhdGlvbgAAAAAAAAAAAAAMYXVkaW9jb2RlY2lkAgAEbXA0YQAFd2lkdGgAAA AAAAAAAAAABmhlaWdodAAAAAAAAAAAAAAMdmlkZW9jb2RlY2lkAgAESDI2NAAKYXZjcHJvZmlsZQBAUIAAAAAAAAAI YXZjbGV2ZWwAQD4AAAAAAAAABmFhY2FvdAAAAAAAAAAAAAAPYXVkaW9zYW1wbGVyYXRlAEDfQAAAAAAAAA1hdWRpb2 NoYW5uZWxzAEAAAAAAAAAAAA52aWRlb2ZyYW1lcmF0ZQD/+AAAAAAAAAAJdHJhY2tpbmZvCgAAAAIDAAZsZW5ndGgA AAAAAAAAAAAACXRpbWVzY2FsZQBAj0AAAAAAAAAIbGFuZ3VhZ2UCAANlbmcAAAkDAAZsZW5ndGgAAAAAAAAAAAAACX RpbWVzY2FsZQBAj0AAAAAAAAAIbGFuZ3VhZ2UCAANlbmcAAAkADXNtcHRlVGltZUluZm8DAAtzbXB0ZU9mZnNldAAA AAAAAAAAAAAACQAHY3VzdGRlZgoAAAAAAAAJ
</metadata>
</media>
<bootstrapInfo profile="named" url="../../../../streams/livepkgr/streams/_definst_/livestream%i2/livestream%i2.bootstrap" id="bootstrap6801"></bootstrapInfo>
<media streamId="livestream%i2" url="../../../../streams/livepkgr/streams/_definst_/livestream%i2/livestream%i2" bootstrapInfoId="bootstrap6801">
<metadata>
AgAKb25NZXRhRGF0YQgAAAAAAAhkdXJhdGlvbgAAAAAAAAAAAAAMYXVkaW9jb2RlY2lkAgAEbXA0YQAFd2lkdGgAAA AAAAAAAAAABmhlaWdodAAAAAAAAAAAAAAMdmlkZW9jb2RlY2lkAgAESDI2NAAKYXZjcHJvZmlsZQBAUIAAAAAAAAAI YXZjbGV2ZWwAQD4AAAAAAAAABmFhY2FvdAAAAAAAAAAAAAAPYXVkaW9zYW1wbGVyYXRlAEDfQAAAAAAAAA1hdWRpb2 NoYW5uZWxzAEAAAAAAAAAAAA52aWRlb2ZyYW1lcmF0ZQD/+AAAAAAAAAAJdHJhY2tpbmZvCgAAAAIDAAZsZW5ndGgA AAAAAAAAAAAACXRpbWVzY2FsZQBAj0AAAAAAAAAIbGFuZ3VhZ2UCAANlbmcAAAkDAAZsZW5ndGgAAAAAAAAAAAAACX RpbWVzY2FsZQBAj0AAAAAAAAAIbGFuZ3VhZ2UCAANlbmcAAAkADXNtcHRlVGltZUluZm8DAAtzbXB0ZU9mZnNldAAA AAAAAAAAAAAACQAHY3VzdGRlZgoAAAAAAAAJ
</metadata>
</media>
<bootstrapInfo profile="named" url="../../../../streams/livepkgr/streams/_definst_/livestream%i3/livestream%i3.bootstrap" id="bootstrap1"> </bootstrapInfo>
<media streamId="livestream%i3" url="../../../../streams/livepkgr/streams/_definst_/livestream%i3/livestream%i3" bootstrapInfoId="bootstrap1">
<metadata>
AgAKb25NZXRhRGF0YQgAAAAAAAhkdXJhdGlvbgAAAAAAAAAAAAAMYXVkaW9jb2RlY2lkAgAEbXA0YQAFd2lkdGgAAA AAAAAAAAAABmhlaWdodAAAAAAAAAAAAAAMdmlkZW9jb2RlY2lkAgAESDI2NAAKYXZjcHJvZmlsZQBAUIAAAAAAAAAI YXZjbGV2ZWwAQD4AAAAAAAAABmFhY2FvdAAAAAAAAAAAAAAPYXVkaW9zYW1wbGVyYXRlAEDfQAAAAAAAAA1hdWRpb2 NoYW5uZWxzAEAAAAAAAAAAAA52aWRlb2ZyYW1lcmF0ZQD/+AAAAAAAAAAJdHJhY2tpbmZvCgAAAAIDAAZsZW5ndGgA AAAAAAAAAAAACXRpbWVzY2FsZQBAj0AAAAAAAAAIbGFuZ3VhZ2UCAANlbmcAAAkDAAZsZW5ndGgAAAAAAAAAAAAACX RpbWVzY2FsZQBAj0AAAAAAAAAIbGFuZ3VhZ2UCAANlbmcAAAkADXNtcHRlVGltZUluZm8DAAtzbXB0ZU9mZnNldAAA AAAAAAAAAAAACQAHY3VzdGRlZgoAAAAAAAAJ
</metadata>
</media>
</manifest>
It seems to me that it is a configuration issue, but I have no clue.
I compared above manifest with a sample manifest that I found on Adobe's site, the attributes are same but the structure is not. Maybe that is causing OSMF to fail.
Thanks for any suggestion!

I am using other encoder than FMLE. I am publishing 3 streams.
rtmp://x.y.z.w/livepkgr
H264 BL3.0 60kbps, 160kbps and 310kbps & AAC-LC Stereo 32kHz 40kbps & Fragment duration 4 sec
>>> matches C:\Program Files\Adobe\Flash Media Server 4\applications\livepkgr\events\_definst_\liveevent Event.xml and Manifest.xml files.
<FragmentDuration>4000</FragmentDuration>
<media streamId="livestream1" bitrate="100" />
<media streamId="livestream2" bitrate="200" />
<media streamId="livestream3" bitrate="350" />
(e.g. 60kbps video + 40kbps audio for the 1st stream)
I have Common output parameters > Stream Name configuration on my Live Transcoder and I write the following:
livestream%i?adbe-live-event=liveevent&adbe-http-streaming-ver=1.0
Then Admin Console > View Apps > Live Log includes the following:
Stream name is: livestream%i1 and live event is: liveevent
Stream name is: livestream%i2 and live event is: liveevent
Stream name is: livestream%i3 and live event is: liveevent
As you say, it seems %i above causes the problem, but how to fix it?
My f4m includes the bitrates:
<id> livepkgr/events/_definst_/liveevent </id>
<mimeType> </mimeType>
<streamType> live </streamType>
<duration> 0 </duration>
<media streamId="livestream1" bitrate="100">
<metadata> </metadata>
</media>
<media streamId="livestream2" bitrate="200">
<metadata> </metadata>
</media>
<media streamId="livestream3" bitrate="350">
<metadata> </metadata>
</media>
Thanks!

Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

ITunes missing from Media Browser -- "open itunes to populate list"

Similar Messages

Maybe you are looking for