ITunes movie downloads taking long time to download
iTunes has been "downloading" Transformers Dark of the Moon for 1 hr still shows no progress. I have internet connection What do I need to do?
I have been having the same issue. I am not willing to delete all of the apps necessary to make room for the update, so I plugged my phone in to use iTunes to download. I have tried it several times and each time that I plug the phone in to see if the download is going to go through, it always says at least 15 and sometimes up to 36 hours for the download. I obviously, like many others, don't have that kind of time to wait. What is going on? Are their servers that backlogged from all the requests? Why is this download taking that long? It's really frustrating!
I have thought maybe I just should wait a week and see what happens... by then they should be able to work through all the kinks.
Similar Messages
-
Closed Caption Features for iTune Movie Downloads?
While I was glad to see that Apple plans to offer a movie download service with the iTunes Store, I'm still inclined to NOT use the service if there's no assurance that closed captioned/subtitled movies will be available as well.
Will iTunes Movie downloads include captioned media?
Today's DVDs all have features enabling us to turn on captions/subtitles and it's already a shame that Netflix, according to a representative's comment made nearly two years ago, will not provide captioned movies "until the near future"...
I hope Apple takes its hearing-impaired (deaf and hard of hearing) customer base into consideration...and it IS a sizeable customer base.The question on the minds of the millions of deaf and hard of hearing people is whether Apple will make or enable captioning for their downloadable movies. I blogged about this a few weeks ago at HearingExchange online here: http://www.hearingexchange.com/blogs/?p=93 Apple didn't consider people with hearing loss when they made their iPhone non-compatible with hearing aids and cochlear implant processors. For a technology company, they aren't keeping up with accessibility trends. This is both disheartening and disappointing for people who struggle to participate socially and professionally on a daily basis with the world at large.
-
Is itunes movie downloads working? keep getting error 50 but have an internet connection
is itunes movie downloads working? keep getting error 50 but have an internet connection and able to see items in the store
Hello.
Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
Information about error -50 and downloading videos
http://support.apple.com/kb/TS1583
If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273. -
In my macbook pro 5,2 snow leopard (10.6.8), Finder taking long time to load contents of any directory. Please help?
I have already tried to spotlight re-indexing but it did not help. I am hardly able to work on it, almost for each directory I browse its keeps on spinning for 1min.Download iTunes from Apple's web site and install it. Don't use Software Update.
-
Report Taking long time in QA system
Gurus,
I have developed a report which works fine in dev.Though in QA system its performance is not okay.Please go through th ecode and help me through.
TABLES: REGUH,BSAK,BSIS,LFA1,LFB1,BSAS.
**** Internal table declaration starts.
*** To Store Vendor clearing Document.
*** Internal table for credit card sub total.
DATA : BEGIN OF I_BSAK OCCURS 0,
XBLNR LIKE BSAK-XBLNR,
LIFNR LIKE REGUH-LIFNR,
PRCTR LIKE BSEG-PRCTR,
NAME1 LIKE LFA1-NAME1,
AUGDT LIKE BSAK-AUGDT,
AUGBL LIKE BSAK-AUGBL,
XBLNR1 LIKE BSAK-XBLNR,
GJAHR LIKE BSAK-GJAHR,
BELNR LIKE BSAK-BELNR,
BLDAT LIKE BSAK-BLDAT,
BLART LIKE BSAK-BLART,
SHKZG LIKE BSAK-SHKZG,
DMBTR LIKE BSAK-DMBTR,
AUGGJ LIKE BSAK-AUGGJ,
CPUDT LIKE BSAK-CPUDT,
LAUFD LIKE REGUH-LAUFD,
KTOKK LIKE LFA1-KTOKK,
RWBTR LIKE REGUH-RWBTR,
VBLNR LIKE REGUH-VBLNR,
HKONT LIKE BSEG-HKONT,
END OF I_BSAK.
*** Internal table for Vendor sub total.
DATA : BEGIN OF I_BSAK_LIFNR OCCURS 0,
LIFNR LIKE REGUH-LIFNR,
XBLNR LIKE BSAK-XBLNR,
PRCTR LIKE BSEG-PRCTR,
NAME1 LIKE LFA1-NAME1,
AUGDT LIKE BSAK-AUGDT,
AUGBL LIKE BSAK-AUGBL,
XBLNR1 LIKE BSAK-XBLNR,
GJAHR LIKE BSAK-GJAHR,
BELNR LIKE BSAK-BELNR,
BLDAT LIKE BSAK-BLDAT,
BLART LIKE BSAK-BLART,
SHKZG LIKE BSAK-SHKZG,
DMBTR LIKE BSAK-DMBTR,
AUGGJ LIKE BSAK-AUGGJ,
CPUDT LIKE BSAK-CPUDT,
LAUFD LIKE REGUH-LAUFD,
KTOKK LIKE LFA1-KTOKK,
RWBTR LIKE REGUH-RWBTR,
VBLNR LIKE REGUH-VBLNR,
HKONT LIKE BSEG-HKONT,
END OF I_BSAK_LIFNR.
*** Internal table for Profit center sub total.
DATA : BEGIN OF I_BSAK_PRCTR OCCURS 0,
PRCTR LIKE BSEG-PRCTR,
BELNR LIKE BSAK-BELNR,
GJAHR LIKE BSAK-GJAHR,
LIFNR LIKE REGUH-LIFNR,
XBLNR LIKE BSAK-XBLNR,
HKONT LIKE BSEG-HKONT,
NAME1 LIKE LFA1-NAME1,
AUGDT LIKE BSAK-AUGDT,
AUGBL LIKE BSAK-AUGBL,
XBLNR1 LIKE BSAK-XBLNR,
BLDAT LIKE BSAK-BLDAT,
BLART LIKE BSAK-BLART,
SHKZG LIKE BSAK-SHKZG,
DMBTR LIKE BSAK-DMBTR,
AUGGJ LIKE BSAK-AUGGJ,
CPUDT LIKE BSAK-CPUDT,
LAUFD LIKE REGUH-LAUFD,
KTOKK LIKE LFA1-KTOKK,
RWBTR LIKE REGUH-RWBTR,
VBLNR LIKE REGUH-VBLNR,
END OF I_BSAK_PRCTR.
*** Work area for sub totals.
DATA: WA LIKE I_BSAK.
DATA : I_BSAK_INIT LIKE I_BSAK OCCURS 0 WITH HEADER LINE.
*** To store line item.
DATA : BEGIN OF I_BSEG OCCURS 0,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
BUZEI LIKE BSEG-BUZEI,
HKONT LIKE BSEG-HKONT,
SHKZG LIKE BSEG-SHKZG,
DMBTR LIKE BSEG-DMBTR,
PRCTR LIKE BSEG-PRCTR,
LIFNR LIKE REGUH-LIFNR,
AUGDT LIKE BSAK-AUGDT,
AUGBL LIKE BSAK-AUGBL,
XBLNR LIKE BSAK-XBLNR,
XBLNR1 LIKE BSAK-XBLNR,
BLDAT LIKE BSAK-BLDAT,
BLART LIKE BSAK-BLART,
NAME1 LIKE LFA1-NAME1,
END OF I_BSEG.
DATA : BEGIN OF I_BSEG_COPY OCCURS 0,
PRCTR LIKE BSEG-PRCTR,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
BUZEI LIKE BSEG-BUZEI,
HKONT LIKE BSEG-HKONT,
SHKZG LIKE BSEG-SHKZG,
DMBTR LIKE BSEG-DMBTR,
LIFNR LIKE REGUH-LIFNR,
AUGDT LIKE BSAK-AUGDT,
AUGBL LIKE BSAK-AUGBL,
XBLNR LIKE BSAK-XBLNR,
XBLNR1 LIKE BSAK-XBLNR,
BLDAT LIKE BSAK-BLDAT,
BLART LIKE BSAK-BLART,
NAME1 LIKE LFA1-NAME1,
END OF I_BSEG_COPY.
*** To store GL account name
DATA: BEGIN OF I_SKAT OCCURS 0,
SAKNR LIKE SKAT-SAKNR,
TXT50 LIKE SKAT-TXT50,
END OF I_SKAT.
*** To store Vendor detail
DATA: BEGIN OF I_LFA1 OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
KTOKK LIKE LFA1-KTOKK,
END OF I_LFA1.
DATA: I_INACT TYPE TABLE OF SY-UCOMM.
*** End of Internal table declaration.
*** Constant for company code
CONSTANTS : C_BUKRS(4) VALUE '0010'.
*** Data declaration.
DATA: FR_LAUFDT LIKE REGUH-LAUFD,
TO_LAUFDT LIKE REGUH-LAUFD,
COL,
HEADING(80),
HEADING1(10),
HEADING2(80),
AUTH_RESTRICT,
G_DETAIL,
G_SORTV,
G_SORTP,
G_SORTC,
G_FLAG,
V_XBLNR LIKE BSAK-XBLNR,
V_UCOMM LIKE SY-UCOMM,
V_AUGBL LIKE BSAS-AUGBL,
V_BELNR LIKE BSAS-BELNR.
DATA : BEGIN OF I_SEL OCCURS 0 ,
AUGBL LIKE BSAK-AUGBL,
END OF I_SEL.
DATA: PROGNAME TYPE SY-REPID,
DYNNUM TYPE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB LIKE I_SEL OCCURS 0 WITH HEADER LINE.
DATA : RETURN_TAB LIKE DDSHRETVAL OCCURS 0 WITH HEADER LINE.
*** Selection screen.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) TXT_PD FOR FIELD P_LAUFDF.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS P_LAUFDF LIKE REGUH-LAUFD OBLIGATORY.
SELECTION-SCREEN COMMENT 52(5) TXT_TO FOR FIELD P_LAUFDT.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS P_LAUFDT LIKE REGUH-LAUFD.
SELECTION-SCREEN END OF LINE.
SELECT-OPTIONS: S_KTOKK FOR LFA1-KTOKK.
PARAMETERS: P_RWBTR LIKE REGUH-RWBTR.
SELECT-OPTIONS: S_LIFNR FOR REGUH-LIFNR.
* S_XBLNR FOR BSAK-XBLNR MATCHCODE OBJECT ZXBLNR.
**** Added By Rajesh On 17 OCT 08 (DEVK914797) ****
SELECT-OPTIONS: S_BELNR FOR BSAK-BELNR.
**** End of Addition By Rajesh *****
*** Added By Samir On 04 Sep 08 (DEVK914623) ***
SELECTION-SCREEN SKIP.
PARAMETERS: CHK_REC AS CHECKBOX.
*** End Of Addition By Samir ***
SELECTION-SCREEN END OF BLOCK B1.
*** Initialization.
INITIALIZATION.
TXT_PD = 'Payment Date'.
TXT_TO = 'to' .
G_SORTC = 'X'.
*** At selection-screen.
AT SELECTION-SCREEN.
FR_LAUFDT = P_LAUFDF.
IF P_LAUFDT IS INITIAL.
TO_LAUFDT = FR_LAUFDT.
ELSE.
IF P_LAUFDT LT P_LAUFDF.
MESSAGE E000(ZMSG) WITH 'To Date is less than From date'.
ENDIF.
TO_LAUFDT = P_LAUFDT.
ENDIF.
*** Heading.
WRITE FR_LAUFDT TO HEADING1.
WRITE TO_LAUFDT TO HEADING2.
IF HEADING1 <> HEADING2.
CONCATENATE 'Vendor Credit Card(s) Report for the Payment Date'
HEADING1 'To' HEADING2 INTO HEADING2 SEPARATED BY SPACE.
ELSE.
CONCATENATE 'Vendor Credit Card(s) Report for the Payment Date'
HEADING1 INTO HEADING2 SEPARATED BY SPACE.
ENDIF.
*** Start of selection.
START-OF-SELECTION.
G_DETAIL = 'X'.
PERFORM GET_DATA.
PERFORM MODIFY_ITAB. "Process and for authority check.
*** Added By Samir On 04 Sep 08 (DEVK914623) ***
**** Changed By Rajesh On 17 OCT 08 (DEVK914797) ****
IF CHK_REC = 'X'.
LOOP AT I_BSAK.
SELECT SINGLE BELNR
INTO V_BELNR
FROM BSAS
WHERE BUKRS = C_BUKRS
AND HKONT = '0000002012'
AND BELNR = I_BSAK-AUGBL
AND BUDAT = I_BSAK-AUGDT
AND BELNR IN S_BELNR. " For displaying only reconciled items.
**** End of Addition By Rajesh *****
IF SY-SUBRC <> 0.
DELETE I_BSAK.
ENDIF.
ENDLOOP.
ENDIF.
*** End Of Addition By Samir ***
LOOP AT I_BSAK.
MOVE-CORRESPONDING I_BSAK TO: I_BSAK_LIFNR.
APPEND: I_BSAK_LIFNR.
CLEAR: I_BSAK_LIFNR.
ENDLOOP.
LOOP AT I_BSAK.
MOVE-CORRESPONDING I_BSAK TO: I_BSAK_PRCTR.
READ TABLE I_BSEG WITH KEY BELNR = I_BSAK-BELNR.
I_BSAK_PRCTR-HKONT = I_BSEG-HKONT.
APPEND: I_BSAK_PRCTR.
CLEAR: I_BSAK_PRCTR.
ENDLOOP.
*loop at i_bseg.
* MOVE-CORRESPONDING I_BSAK TO: I_BSAK_PRCTR.
*endloop.
*perform write_data.
PERFORM DISPLAY_OUTPUT.
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPA'.
G_DETAIL = 'X'.
WHEN 'COLL'.
CLEAR G_DETAIL.
WHEN 'SORTV'.
CLEAR: V_UCOMM.
V_UCOMM = 'SORTV'.
G_SORTV = 'X'.
CLEAR G_SORTP.
CLEAR G_SORTC.
WHEN 'SORTC'.
CLEAR: V_UCOMM.
V_UCOMM = 'SORTC'.
CLEAR G_SORTV.
CLEAR G_SORTP.
G_SORTC = 'X'.
WHEN 'SORTP'.
CLEAR: V_UCOMM.
V_UCOMM = 'SORTP'.
CLEAR G_SORTV.
CLEAR G_SORTC.
G_SORTP = 'X'.
ENDCASE.
PERFORM DISPLAY_OUTPUT.
*perform write_data.
*** To get the header text in the output.
TOP-OF-PAGE.
PERFORM TOP_OF_PAGE.
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM TOP_OF_PAGE.
*& Form GET_DATA
* text
* --> p1 text
* <-- p2 text
FORM GET_DATA .
SY-LSIND = 0.
P_RWBTR = P_RWBTR * -1.
REFRESH I_BSAK_INIT.
CLEAR I_BSAK_INIT.
SELECT A~LIFNR A~LAUFD A~VBLNR A~RWBTR
B~KTOKK B~NAME1
FROM REGUH AS A INNER JOIN LFA1 AS B
ON A~LIFNR = B~LIFNR
INTO CORRESPONDING FIELDS OF TABLE I_BSAK_INIT
WHERE A~LAUFD BETWEEN FR_LAUFDT AND TO_LAUFDT AND
A~XVORL <> 'X' AND
A~ZBUKR = C_BUKRS AND
A~LIFNR IN S_LIFNR AND
A~RZAWE = 'X' AND
A~RWBTR LE P_RWBTR AND
B~KTOKK IN S_KTOKK.
IF SY-SUBRC <> 0.
MESSAGE 'Records Not Found' TYPE 'I'.
LEAVE LIST-PROCESSING.
ENDIF.
*---------------------PERFORMANCE ISSUE--------------------------
delete adjacent duplicates from i_bsak_init.
IF NOT I_BSAK_INIT[] IS INITIAL.
SELECT LIFNR AUGDT AUGBL GJAHR BELNR CPUDT BLDAT XBLNR
BLART SHKZG DMBTR AUGGJ
FROM BSAK
INTO CORRESPONDING FIELDS OF TABLE I_BSAK
FOR ALL ENTRIES IN I_BSAK_INIT
WHERE BUKRS = C_BUKRS AND
AUGBL = I_BSAK_INIT-VBLNR AND
XZAHL <> 'X'.
ENDIF.
*** Selecting all line item records from BSEG table.
IF I_BSAK[] IS NOT INITIAL.
SELECT BELNR GJAHR BUZEI HKONT SHKZG DMBTR PRCTR
FROM BSEG
INTO CORRESPONDING FIELDS OF TABLE I_BSEG
FOR ALL ENTRIES IN I_BSAK
WHERE BUKRS = C_BUKRS AND
BELNR = I_BSAK-BELNR AND
GJAHR = I_BSAK-GJAHR AND
BELNR <> I_BSAK-AUGBL AND
KOART <> 'K'.
ENDIF.
*** Selecting gl account name from SKAT table.
IF I_BSEG[] IS NOT INITIAL.
SELECT SAKNR TXT50
FROM SKAT
INTO CORRESPONDING FIELDS OF TABLE I_SKAT
FOR ALL ENTRIES IN I_BSEG
WHERE SPRAS = 'E' AND
KTOPL = C_BUKRS AND
SAKNR = I_BSEG-HKONT.
ENDIF.
SORT I_BSAK BY BELNR.
SORT I_BSAK_INIT BY VBLNR.
SORT I_BSEG BY BELNR GJAHR.
*** Selecting Credit Card No. into I_XBLNR table.
LOOP AT I_BSAK.
I_BSAK-XBLNR1 = I_BSAK-XBLNR.
CLEAR: V_XBLNR.
SELECT SINGLE XBLNR FROM BKPF INTO V_XBLNR
WHERE BUKRS = C_BUKRS AND
BELNR = I_BSAK-AUGBL.
IF SY-SUBRC EQ 0.
I_BSAK-XBLNR = V_XBLNR.
ENDIF.
READ TABLE I_BSEG WITH KEY BELNR = I_BSAK-BELNR
GJAHR = I_BSAK-GJAHR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
I_BSAK-PRCTR = I_BSEG-PRCTR.
ENDIF.
READ TABLE I_BSAK_INIT WITH KEY VBLNR = I_BSAK-AUGBL BINARY SEARCH.
IF SY-SUBRC EQ 0.
I_BSAK-NAME1 = I_BSAK_INIT-NAME1.
I_BSAK-LAUFD = I_BSAK_INIT-LAUFD.
I_BSAK-KTOKK = I_BSAK_INIT-KTOKK.
ENDIF.
MODIFY I_BSAK TRANSPORTING XBLNR XBLNR1 PRCTR NAME1 LAUFD KTOKK.
ENDLOOP.
ENDFORM. " GET_DATA
*& Form MODIFY_ITAB
* text
* --> p1 text
* <-- p2 text
FORM MODIFY_ITAB .
*** Process on internal table
LOOP AT I_BSAK.
AUTHORITY-CHECK OBJECT 'F_LFA1_GRP'
ID 'KTOKK'
FIELD I_BSAK-KTOKK.
IF SY-SUBRC NE 0.
DELETE I_BSAK WHERE KTOKK EQ I_BSAK-KTOKK.
AUTH_RESTRICT = 'X'.
CONTINUE.
ENDIF.
ENDLOOP.
IF AUTH_RESTRICT EQ 'X'.
MESSAGE S005(ZMSG).
ENDIF.
LOOP AT I_BSAK.
IF I_BSAK-SHKZG = 'S'.
I_BSAK-DMBTR = I_BSAK-DMBTR * -1.
MODIFY I_BSAK .
ENDIF.
ENDLOOP.
LOOP AT I_BSEG.
IF I_BSEG-SHKZG = 'H'.
I_BSEG-DMBTR = I_BSEG-DMBTR * -1.
MODIFY I_BSEG .
ENDIF.
ENDLOOP.
*** Default Sorting on internal table .
SORT I_BSAK BY XBLNR LIFNR BELNR.
SORT I_BSEG BY BELNR HKONT.
SORT I_SKAT BY SAKNR.
ENDFORM. " MODIFY_ITAB
*& Form DISPLAY_OUTPUT
* text
* --> p1 text
* <-- p2 text
FORM DISPLAY_OUTPUT .
*** Coding for detail output starts
CLEAR SY-LSIND.
REFRESH I_INACT.
IF G_DETAIL EQ 'X'.
APPEND 'EXPA' TO I_INACT.
ELSE.
APPEND 'COLL' TO I_INACT.
ENDIF.
IF G_SORTV EQ 'X'.
APPEND 'SORTV' TO I_INACT.
SORT I_BSAK BY LIFNR.
SORT I_BSAK_LIFNR BY LIFNR.
ELSEIF G_SORTP EQ 'X'.
APPEND 'SORTP' TO I_INACT.
SORT I_BSAK BY PRCTR.
SORT I_BSAK_PRCTR BY PRCTR.
ELSE.
APPEND 'SORTC' TO I_INACT.
SORT I_BSAK BY XBLNR.
ENDIF.
SET PF-STATUS 'STAT' EXCLUDING I_INACT.
IF V_UCOMM = 'SORTC'.
PERFORM WRITE_DATA.
ELSEIF V_UCOMM = 'SORTV' . "Subroutine for card sub total.
PERFORM WRITE_DATA_VENDOR. "Subroutine for vendor sub total.
ELSEIF V_UCOMM = 'SORTP'. "Subroutine for profit center sub total.
* PERFORM WRITE_DATA_PROFIT.
PERFORM WRITE_DATA_PROFIT_NEW. " New subroutine for profit center.
ELSE.
PERFORM WRITE_DATA.
ENDIF.
ENDFORM. " DISPLAY_OUTPUT
*& Form F_COLOR
* text
* --> p1 text
* <-- p2 text
FORM F_COLOR .
IF COL = 'X'.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
CLEAR COL.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
COL = 'X'.
ENDIF.
ENDFORM. " F_COLOR
*& Form TOP_OF_PAGE
* text
* --> p1 text
* <-- p2 text
FORM TOP_OF_PAGE .
*** Top-of-page is Common for summary and detail report.
*** To display top of page only on first page.
IF SY-PAGNO = 1 .
CALL FUNCTION 'Z_NPL_HEADING'
EXPORTING
LINE_SIZE = SY-LINSZ
HEADING1 = HEADING
HEADING2 = HEADING2.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
**** To get output columns text descprition
ULINE.
WRITE:/ SY-VLINE NO-GAP, (10) 'Vendor' NO-GAP,
SY-VLINE NO-GAP, (35) 'Name of Payee' NO-GAP,
SY-VLINE NO-GAP, (10) 'G/L Num' NO-GAP,
SY-VLINE NO-GAP, (42) 'G/L Name' NO-GAP,
SY-VLINE NO-GAP, (07) 'Profit Center' NO-GAP,
SY-VLINE NO-GAP, (16) 'Credit Card NO.' NO-GAP,
SY-VLINE NO-GAP, (10) 'Pmnt Date' NO-GAP,
SY-VLINE NO-GAP, (08) 'Doc.Type' NO-GAP,
SY-VLINE NO-GAP, (10) 'Inv.Date' NO-GAP,
SY-VLINE NO-GAP, (16) 'Invoice' NO-GAP,
SY-VLINE NO-GAP, (14) 'Amount Paid' NO-GAP,
SY-VLINE.
ULINE.
ENDIF.
ENDFORM. " TOP_OF_PAGE
*& Form WRITE_DATA
* text
* --> p1 text
* <-- p2 text
FORM WRITE_DATA .
LOOP AT I_BSAK.
CLEAR WA.
MOVE-CORRESPONDING I_BSAK TO WA.
PERFORM WRITE.
AT END OF XBLNR. "Card sub total
IF G_SORTC EQ 'X'.
SUM.
IF G_DETAIL EQ 'X'. ULINE. ENDIF.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
WRITE:/ SY-VLINE NO-GAP, (25) 'Credit Card Total:', I_BSAK-XBLNR ,
(35) I_BSAK-NAME1 NO-GAP.
WRITE: 110 SY-VLINE NO-GAP,(79) I_BSAK-DMBTR NO-GAP
CURRENCY 'USD',SY-VLINE.
ULINE.
ENDIF.
ENDAT. "End of Credit card Detail
**** Grand total
AT LAST. "Grand total
SUM.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
WRITE:/ SY-VLINE NO-GAP,(107) 'Grand Total:',
SY-VLINE NO-GAP,(79) I_BSAK-DMBTR NO-GAP
CURRENCY 'USD', SY-VLINE.
ULINE.
ENDAT.
ENDLOOP. "End for I_BSAK loop
ENDFORM. " WRITE_DATA
*& Form WRITE_DATA_VENDOR
* text
* --> p1 text
* <-- p2 text
FORM WRITE_DATA_VENDOR .
LOOP AT I_BSAK_LIFNR.
CLEAR WA.
MOVE-CORRESPONDING I_BSAK_LIFNR TO WA.
PERFORM WRITE.
AT END OF LIFNR. "Vendor sub Total
IF G_SORTV EQ 'X'.
SUM.
IF G_DETAIL EQ 'X'. ULINE. ENDIF.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ SY-VLINE NO-GAP,(15) 'Vendor Total:', I_BSAK_LIFNR-LIFNR.
WRITE: 110 SY-VLINE NO-GAP,(79) I_BSAK_LIFNR-DMBTR NO-GAP
CURRENCY 'USD',SY-VLINE.
ULINE.
ENDIF.
ENDAT. "End of Vendor Total
**** Grand total
AT LAST. "Grand total
SUM.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
WRITE:/ SY-VLINE NO-GAP,(107) 'Grand Total:',
SY-VLINE NO-GAP,(79) I_BSAK_LIFNR-DMBTR NO-GAP
CURRENCY 'USD', SY-VLINE.
ULINE.
ENDAT.
ENDLOOP. "End for I_BSAK_LIFNR loop
ENDFORM. " WRITE_DATA_VENDOR
*& Form WRITE_DATA_PROFIT
* text
* --> p1 text
* <-- p2 text
FORM WRITE_DATA_PROFIT .
*** Changed By Samir On 18 Sep 08 (DEVK914685) ***
LOOP AT I_BSAK_PRCTR.
READ TABLE I_BSAK WITH KEY BELNR = I_BSAK_PRCTR-BELNR
GJAHR = I_BSAK_PRCTR-GJAHR.
IF SY-SUBRC = 0.
I_BSAK_PRCTR-LIFNR = I_BSAK-LIFNR.
I_BSAK_PRCTR-NAME1 = I_BSAK-NAME1.
I_BSAK_PRCTR-XBLNR = I_BSAK-XBLNR.
I_BSAK_PRCTR-LAUFD = I_BSAK-LAUFD.
I_BSAK_PRCTR-BLART = I_BSAK-BLART.
I_BSAK_PRCTR-BLDAT = I_BSAK-BLDAT.
I_BSAK_PRCTR-XBLNR1 = I_BSAK-XBLNR1.
MODIFY I_BSAK_PRCTR TRANSPORTING LIFNR NAME1 XBLNR LAUFD BLART BLDAT XBLNR1.
ENDIF.
ENDLOOP.
*** End Of Changes By Samir On 18 Sep 08 ***
SORT I_BSAK_PRCTR BY PRCTR.
LOOP AT I_BSAK_PRCTR.
PERFORM F_COLOR.
IF G_DETAIL = 'X'.
*** Changed By Samir On 18 Sep 08 (DEVK914685) ***
READ TABLE I_SKAT WITH KEY SAKNR = I_BSAK_PRCTR-HKONT BINARY SEARCH.
WRITE:/ SY-VLINE NO-GAP, (10) I_BSAK_PRCTR-LIFNR NO-GAP,
SY-VLINE NO-GAP, (35) I_BSAK_PRCTR-NAME1 NO-GAP,
SY-VLINE NO-GAP, (10) I_BSAK_PRCTR-HKONT NO-GAP,
SY-VLINE NO-GAP, (42) I_SKAT-TXT50 NO-GAP,
SY-VLINE NO-GAP, (07) I_BSAK_PRCTR-PRCTR NO-GAP,
SY-VLINE NO-GAP, (16) I_BSAK_PRCTR-XBLNR NO-GAP, " CREDIT CARD NO.
SY-VLINE NO-GAP, (10) I_BSAK_PRCTR-LAUFD NO-GAP,
SY-VLINE NO-GAP, (08) I_BSAK_PRCTR-BLART NO-GAP,
SY-VLINE NO-GAP, (10) I_BSAK_PRCTR-BLDAT NO-GAP,
SY-VLINE NO-GAP, (16) I_BSAK_PRCTR-XBLNR1 NO-GAP.
WRITE: SY-VLINE NO-GAP, (14) I_BSAK_PRCTR-DMBTR NO-GAP.
WRITE: SY-VLINE.
ENDIF.
*** End Of Changes By Samir On 18 Sep 08 ***
AT END OF PRCTR. "Profit Center sub Total
IF G_SORTP EQ 'X'.
SUM.
IF G_DETAIL EQ 'X'. ULINE. ENDIF.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ SY-VLINE NO-GAP,(07) 'Profit Center Total:', I_BSAK_PRCTR-PRCTR.
WRITE: 110 SY-VLINE NO-GAP,(79) I_BSAK_PRCTR-DMBTR NO-GAP
CURRENCY 'USD',SY-VLINE.
ULINE.
ENDIF.
ENDAT. "End of Profit Center Total
**** Grand total
AT LAST. "Grand total
SUM.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
WRITE:/ SY-VLINE NO-GAP,(107) 'Grand Total:',
SY-VLINE NO-GAP,(79) I_BSAK_PRCTR-DMBTR NO-GAP
CURRENCY 'USD', SY-VLINE.
ULINE.
ENDAT.
ENDLOOP. "End for I_BSAK_PRCTR loop
ENDFORM. " WRITE_DATA_PROFIT
*& Form WRITE
* text
* --> p1 text
* <-- p2 text
FORM WRITE .
IF G_DETAIL = 'X'.
IF WA-KTOKK = 'Z001'. " For HR Vendors
PERFORM F_COLOR.
READ TABLE I_BSEG WITH KEY BELNR = WA-BELNR GJAHR = WA-GJAHR BINARY SEARCH .
READ TABLE I_SKAT WITH KEY SAKNR = I_BSEG-HKONT BINARY SEARCH.
WRITE:/ SY-VLINE NO-GAP, (10) WA-LIFNR NO-GAP,
SY-VLINE NO-GAP, (35) WA-NAME1 NO-GAP,
SY-VLINE NO-GAP, (10) I_BSEG-HKONT NO-GAP,
SY-VLINE NO-GAP, (42) I_SKAT-TXT50 NO-GAP,
*** Changed By Samir On 18 Sep 08 (DEVK914685) ***
* SY-VLINE NO-GAP, (07) WA-PRCTR NO-GAP,
SY-VLINE NO-GAP, (07) I_BSEG-PRCTR NO-GAP,
*** End Of Changes By Samir On 18 Sep 08 ***
SY-VLINE NO-GAP, (16) WA-XBLNR NO-GAP, " CREDIT CARD NO.
SY-VLINE NO-GAP, (10) WA-LAUFD NO-GAP,
SY-VLINE NO-GAP, (08) WA-BLART NO-GAP,
SY-VLINE NO-GAP, (10) WA-BLDAT NO-GAP,
SY-VLINE NO-GAP, (16) WA-XBLNR1 NO-GAP.
WRITE: SY-VLINE NO-GAP, (14) WA-DMBTR NO-GAP.
WRITE: SY-VLINE.
ELSE.
LOOP AT I_BSEG WHERE BELNR = WA-BELNR AND GJAHR = WA-GJAHR .
PERFORM F_COLOR.
READ TABLE I_SKAT WITH KEY SAKNR = I_BSEG-HKONT BINARY SEARCH.
WRITE:/ SY-VLINE NO-GAP, (10) WA-LIFNR NO-GAP,
SY-VLINE NO-GAP, (35) WA-NAME1 NO-GAP,
SY-VLINE NO-GAP, (10) I_BSEG-HKONT NO-GAP,
SY-VLINE NO-GAP, (42) I_SKAT-TXT50 NO-GAP,
*** Changed By Samir On 17 Sep 08 (DEVK914671) ***
* SY-VLINE NO-GAP, (07) WA-PRCTR NO-GAP,
SY-VLINE NO-GAP, (07) I_BSEG-PRCTR NO-GAP,
*** End Of Changes By Samir On 17 Sep 08 ***
SY-VLINE NO-GAP, (16) WA-XBLNR NO-GAP, " CREDIT CARD NO.
SY-VLINE NO-GAP, (10) WA-LAUFD NO-GAP,
SY-VLINE NO-GAP, (08) WA-BLART NO-GAP,
SY-VLINE NO-GAP, (10) WA-BLDAT NO-GAP,
SY-VLINE NO-GAP, (16) WA-XBLNR1 NO-GAP.
WRITE: SY-VLINE NO-GAP, (14) I_BSEG-DMBTR NO-GAP.
WRITE: SY-VLINE.
ENDLOOP. "End for I_BSEG loop
ENDIF. "Endif for I_PAYR-KTOKK = 'Z001'
ENDIF. "Endif for g_detail = 'X'.
ENDFORM. " WRITE
*& Form WRITE_DATA_PROFIT_NEW
* text
* --> p1 text
* <-- p2 text
FORM WRITE_DATA_PROFIT_NEW .
REFRESH I_BSEG_COPY.
CLEAR I_BSEG_COPY.
* DATA I_BSEG_COPY LIKE I_BSEG OCCURS 0 WITH HEADER LINE.
* I_BSEG_COPY[] = I_BSEG[].
LOOP AT I_BSEG.
MOVE-CORRESPONDING I_BSEG TO I_BSEG_COPY.
APPEND I_BSEG_COPY.
CLEAR I_BSEG_COPY.
ENDLOOP.
LOOP AT I_BSEG_COPY.
READ TABLE I_BSAK_PRCTR WITH KEY BELNR = I_BSEG_COPY-BELNR GJAHR = I_BSEG_COPY-GJAHR ."HKONT = I_BSEG_COPY-HKONT.
IF SY-SUBRC = 0.
I_BSEG_COPY-LIFNR = I_BSAK_PRCTR-LIFNR.
I_BSEG_COPY-XBLNR = I_BSAK_PRCTR-XBLNR.
I_BSEG_COPY-NAME1 = I_BSAK_PRCTR-NAME1.
I_BSEG_COPY-AUGDT = I_BSAK_PRCTR-AUGDT.
I_BSEG_COPY-AUGBL = I_BSAK_PRCTR-AUGBL.
I_BSEG_COPY-XBLNR1 = I_BSAK_PRCTR-XBLNR1.
I_BSEG_COPY-BLDAT = I_BSAK_PRCTR-BLDAT.
I_BSEG_COPY-BLART = I_BSAK_PRCTR-BLART.
MODIFY I_BSEG_COPY TRANSPORTING LIFNR XBLNR NAME1 AUGDT AUGBL XBLNR1 BLDAT BLART.
ENDIF.
ENDLOOP.
SORT I_BSAK_PRCTR BY PRCTR BELNR.
SORT I_BSEG BY BELNR.
SORT I_BSEG_COPY BY PRCTR.
DATA COUNT TYPE I.
DATA G_BELNR LIKE BSAK-BELNR.
LOOP AT I_BSEG_COPY.
CLEAR G_BELNR.
G_BELNR = I_BSEG_COPY-BELNR.
COUNT = COUNT + 1.
READ TABLE I_BSAK WITH KEY BELNR = I_BSEG_COPY-BELNR.
IF SY-SUBRC <> 0.
DELETE I_BSEG_COPY WHERE BELNR = G_BELNR."INDEX count.
ENDIF.
ENDLOOP.
* LOOP AT I_BSAK_PRCTR.
LOOP AT I_BSEG_COPY.
CLEAR WA.
MOVE-CORRESPONDING I_BSEG_COPY TO WA.
PERFORM WRITE_PRCTR.
AT END OF PRCTR. "Profit center sub Total
IF G_SORTP EQ 'X'.
SUM.
IF G_DETAIL EQ 'X'. ULINE. ENDIF.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ SY-VLINE NO-GAP,(20) 'Profit Center Total:', I_BSEG_COPY-PRCTR.
WRITE: 110 SY-VLINE NO-GAP,(79) I_BSEG_COPY-DMBTR NO-GAP
CURRENCY 'USD',SY-VLINE.
ULINE.
ENDIF.
ENDAT. "End of Vendor Total
**** Grand total
AT LAST. "Grand total
SUM.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
WRITE:/ SY-VLINE NO-GAP,(107) 'Grand Total:',
SY-VLINE NO-GAP,(79) I_BSEG_COPY-DMBTR NO-GAP
CURRENCY 'USD', SY-VLINE.
ULINE.
ENDAT.
ENDLOOP. "End for I_BSAK_LIFNR loop
*ENDFORM. " WRITE_DATA_VENDOR
ENDFORM. " WRITE_DATA_PROFIT_NEW
*& Form WRITE_PRCTR
* text
* --> p1 text
* <-- p2 text
FORM WRITE_PRCTR .
IF G_DETAIL = 'X'.
IF WA-KTOKK = 'Z001'. " For HR Vendors
PERFORM F_COLOR.
* READ TABLE I_BSEG WITH KEY BELNR = WA-BELNR GJAHR = WA-GJAHR PRCTR = WA-PRCTR BINARY SEARCH .
READ TABLE I_SKAT WITH KEY SAKNR = WA-HKONT BINARY SEARCH.
WRITE:/ SY-VLINE NO-GAP, (10) WA-LIFNR NO-GAP,
SY-VLINE NO-GAP, (35) WA-NAME1 NO-GAP,
SY-VLINE NO-GAP, (10) WA-HKONT NO-GAP,
SY-VLINE NO-GAP, (42) I_SKAT-TXT50 NO-GAP,
*** Changed By Samir On 18 Sep 08 (DEVK914685) ***
SY-VLINE NO-GAP, (07) WA-PRCTR NO-GAP,
* SY-VLINE NO-GAP, (07) I_BSEG-PRCTR NO-GAP,
*** End Of Changes By Samir On 18 Sep 08 ***
SY-VLINE NO-GAP, (16) WA-XBLNR NO-GAP, " CREDIT CARD NO.
SY-VLINE NO-GAP, (10) WA-LAUFD NO-GAP,
SY-VLINE NO-GAP, (08) WA-BLART NO-GAP,
SY-VLINE NO-GAP, (10) WA-BLDAT NO-GAP,
SY-VLINE NO-GAP, (16) WA-XBLNR1 NO-GAP.
WRITE: SY-VLINE NO-GAP, (14) WA-DMBTR NO-GAP.
WRITE: SY-VLINE.
ELSE.
* LOOP AT I_BSEG WHERE BELNR = WA-BELNR AND GJAHR = WA-GJAHR AND PRCTR = WA-PRCTR .
PERFORM F_COLOR.
READ TABLE I_SKAT WITH KEY SAKNR = WA-HKONT BINARY SEARCH.
WRITE:/ SY-VLINE NO-GAP, (10) WA-LIFNR NO-GAP,
SY-VLINE NO-GAP, (35) WA-NAME1 NO-GAP,
SY-VLINE NO-GAP, (10) WA-HKONT NO-GAP,
SY-VLINE NO-GAP, (42) I_SKAT-TXT50 NO-GAP,
*** Changed By Samir On 17 Sep 08 (DEVK914671) ***
SY-VLINE NO-GAP, (07) WA-PRCTR NO-GAP,
* SY-VLINE NO-GAP, (07) I_BSEG-PRCTR NO-GAP,
*** End Of Changes By Samir On 17 Sep 08 ***
SY-VLINE NO-GAP, (16) WA-XBLNR NO-GAP, " CREDIT CARD NO.
SY-VLINE NO-GAP, (10) WA-LAUFD NO-GAP,
SY-VLINE NO-GAP, (08) WA-BLART NO-GAP,
SY-VLINE NO-GAP, (10) WA-BLDAT NO-GAP,
SY-VLINE NO-GAP, (16) WA-XBLNR1 NO-GAP.
WRITE: SY-VLINE NO-GAP, (14) WA-DMBTR NO-GAP.
WRITE: SY-VLINE.
* ENDLOOP. "End for I_BSEG loop
ENDIF. "Endif for I_PAYR-KTOKK = 'Z001'
ENDIF. "Endif for g_detail = 'X'.
ENDFORM. " WRITE_PRCTR
Thanks in advance
Raj.Ralph,
Thanks for the reply.
I have marked the sql statement in the code that is taking long time to run but Its my mistake not explaining the same in the description.
When I was debugging the code the below sql statement was taking long time.
IF NOT I_BSAK_INIT[] IS INITIAL.
SELECT LIFNR AUGDT AUGBL GJAHR BELNR CPUDT BLDAT XBLNR
BLART SHKZG DMBTR AUGGJ
FROM BSAK
INTO CORRESPONDING FIELDS OF TABLE I_BSAK
FOR ALL ENTRIES IN I_BSAK_INIT
WHERE BUKRS = C_BUKRS AND
AUGBL = I_BSAK_INIT-VBLNR AND
XZAHL <> 'X'.
ENDIF.
Any suggestions on the code?
Regards,
Raj. -
Hyperion System 9.3.1 reports taking longer time for the very first time
We are on Hyperion System 9.3.1. The Financial reports are taking longer time (like 2 to 3 minuter) for the very first time for each login. The subsequest reports are does work faster.
The behaviour is same for the Production and Development environments.
All the reporting services have given enough JVM heap size.
FYI, Reporting and Workspace runngin on the same server. Workspace/Reporting are clusted in two servers. HFM app is running on different server. HFM web is on different server. Shared Services is also on running on different server.
Any help would be greately appreciated.
Thanks.The reason they run quicker the subsequent times, is because the data has already been cached in the system.
You could try the usual tricks to speed the report up:
- move items into POV
- have children and parent in the same row
- arrange dimensions in inverse outline order
- remove excessive formatting
- push report calculations back to the data source
We have found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Hope this helps. If not maybe give us an idea of how the report is created to see if other changes could be made. -
SSRS Reports taking long time to load
Hello,
Problem : SSRS Reports taking long time to load
My System environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
Production Environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
I have created a Parameterized report (6 parameters), it will fetch data from 1 table. table has 1 year and 6 months data, I am selecting parameters for only 1 month (about 2500 records). It is taking almost 2 minutes and 30 seconds
to load the report.
This report running efficiently in my system (report load takes only 5 to 6 seconds) but in
production it is taking 2 minutes 30 seconds.
I have checked the Execution log from production so I found the timing for
Data retrieval (approx~) Processing (approx~) Rendering (approx~)
10 second 15 sec
2 mins and 5 sec.
But Confusing point is that , if I run the same report at different time overall output time is same (approx) 2 min 30 sec but
Data retrieval (approx~) Processing (approx~) Rendering (approx~)
more than 1 min 15 sec
more than 1 min
so 1 question why timings are different ?
My doubts are
1) If query(procedure to retrieve the data) is the problem then it should take more time always,
2) If Report structure is problem then rendering will also take same time (long time)
for this (2nd point) I checked on blog that Rendering depends on environment structure e.g. Network bandwidth, RAM, CPU Usage , Number of users accessing same report at a time.
So I did testing of report when no other user working on any report But failed (same result output is 2 min 30 sec)
From network team I got the result is that there is no issue or overload in CPU usage or RAM also No issue in Network bandwidth.
Production Database Server and Report server are different (but in same network).
I checked that database server the SQL Server is using almost Full RAM (23 GB out of 24 GB)
I tried to allocate the memory to less amount up to 2GB (Trial solution I got from Blogs) but this on also failed.
one hint I got from colleague that , change the allocated memory setting from static memory to dynamic to SQL Server
(I guess above point is the same) I could not find that option Static and Dynamic memory setting.
I did below steps
Connected to SQL Server Instance
Right click on Instance go to properties, Go to Memory Tab
I found three options 1) Server Memory 2) Other memory 3) Section for "Configured values and Running values"
Then I tried to reduce Maximum Server memory up to 2 GB (As mentioned above)
All trials failed, this issue I could not find the roots for this issue.
Can anyone please help (it's bit urgent).Hi UdayKGR,
According to your description, your report takes too long to load on your production environment. Right?
In this scenario, since the report runs quickly in developing environment, we initially think it supposed to be the issue on data retrieval. However, based on the information in execution log, it takes longest time on rendering part. So we suggest you optimize
the report itself to reduce the time for rendering. Please refer to the link below:
My report takes too long to render
Here is another article about overall performance optimization for Reporting Services:
Reporting Services Performance and Optimization
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Connecting to the database taking long time to connect database server
Hi
When I execute procedure i am getting the below message at bottom of the Oracle SQL Developer
"Connecting to the database"
it is taking more than 10 min plz guideHi
have you installed a normal Oracle Client also on your Host? normal Oracle Client
Did you connect with host:port:sid or with a Oracle Naming Service? through TNS Service
Can you test tnsping <alias> yes, It is working fine
Did other user have the same problem? yes
Did you connect through WAN or LAN connection? LAN (Intranet)
Can you tell more about you client/database setup?
Database setup:
OS: Window 2008 server
version: 11.1.0
Client: 11.1.0
OS: Window 2008 server
Now I am not able to execute single select query which table contains 6 records and 15 columns it is taking long time I have waited 30 min still no resutls
only one table is behaving like this remaining is working fine
Edited by: user9235224 on Oct 6, 2012 7:06 PM -
The ODS activation is taking long time
Hi,
We are on SAP NetWeaver BI 701 (Support Package 5).
We create a Z ODS, it will contain a lot of data (180.000.000 month-end) and we want to generate specific reports about it.
The activation is taking long time, I assume is because we checked the flag "SIDs Generation upon Activation". I am confused about this check. I really need it? is this check the only problem.
Thanks for you help.
VictoriaHi Victoria:
If your Z DSO is used only for staging purposes (you don't have queries based on this DSO and you send the data to another DSO or to an InfoCube) then you don't need to check the "SIDs Generation Upon Activation" box.
Even more, to achieve better performance during data loads in this scenario, you might consider using a Write Optimized DSO instead of a Standard DSO, but if you decide to take this alternative don't forget to select the "Do Not check Uniqueness of Data" box if you need to write several records with the same Semantic Key.
Regards,
Francisco Milán. -
Hi All,
We are working on BI 7.0. version
In the varaible pop-up screen we have two info objects.
1. Fiscal year Period
2. JOA(Joint operating aggriment)
If u press F4 for JOA, it is taking long time to execute and finally the application is getting closed.same situation is there in RSRT also.
If i enter with out JOA the query is giving the output. Here i have to restrict the query by JOA.
i have changed the JOA peroperties in query designer.
Query execution for filter value selection = Values in master data table.......
but still the situation is the same.......
Could you please suggest any solution for this.....
Thanks & Regards,
PKHi Kamal,
You can set that at the query level in the query designer for each query.
1. Select the corresponding characteristic in the query designer.
2. Goto to the "Extended tab" in the properties
3. Select the "Values in the Master data table" in the "Query execution in the filter value selection.
Also see some recomendations:
Note 748623 - Input help (F4) has a very long runtime - recommendations
Hope this helps.
CK -
Update ztable is taking long time
Hi All,
i have run the 5 jobs with the same program at a time but when we check the db trace
zs01 is taking long time as shown below.here zs01 is having small amount of data.
in the below dbtrace for updating zs01 is taking 2,315,485 seconds .how to reduce this?
HH:MM:SS.MS Duration Program ObjectName Op. Curs Array Rec RC Conn
2:36:15 AM 2,315,485 SAPLZS01 ZS01 FETCH 294 1 1 0 R/3
The code as shown below
you can check the code in the program SAPLZS01 include LZS01F01.
FORM UPDATE_ZS01.
IF ZS02-STATUS = '3'.
IF Z_ZS02_STATUS = '3'. "previous status is ERROR
EXIT.
ELSE.
SELECT SINGLE FOR UPDATE * FROM ZS01
WHERE PROC_NUM = ZS02-PROC_NUM.
CHECK SY-SUBRC = 0.
ADD ZS02-MF_AMT TO ZS01-ERR_AMT.
ADD 1 TO ZS01-ERR_INVOI.
UPDATE ZS01.
ENDIF.
ENDIF.
my question is when updating the ztable why it is taking such long time,
how to reduce the time or how to make faster to update the ztable .
Thanks in advance,
regards
SuniTry the code like this..
data: wa_zs01 type zs01.
FORM UPDATE_ZS01.
IF ZS02-STATUS = '3'.
IF Z_ZS02_STATUS = '3'. "previous status is ERROR
EXIT.
ELSE.
SELECT SINGLE FOR UPDATE * FROM ZS01
WHERE PROC_NUM = ZS02-PROC_NUM.
-- change
CHECK SY-SUBRC = 0.
ADD ZS02-MF_AMT TO wa_ZS01-ERR_AMT.
ADD 1 TO wa_ZS01-ERR_INVOI.
UPDATE ZS01 from wa_zs01.
ENDIF.
ENDIF.
And i think this Select query for ZS01 is inside the ZS02 SELECT statement,
This might also make slow process.
If you want to make database access always use Workarea/Internal table to fetch the data
and work with that.
Accessing database like this or with Select.... endselect is an inefficient programming. -
Simple query is taking long time
Hi Experts,
The below query is taking long time.
[code]SELECT FS.*
FROM ORL.FAX_STAGE FS
INNER JOIN
ORL.FAX_SOURCE FSRC
INNER JOIN
GLOBAL_BU_MAPPING GBM
ON GBM.BU_ID = FSRC.BUID
ON UPPER (FSRC.FAX_NUMBER) = UPPER (FS.DESTINATION)
WHERE FSRC.IS_DELETED = 'N'
AND GBM.BU_ID IS NOT NULL
AND UPPER (FS.FAX_STATUS) ='COMPLETED';[/code]
this query is returning 1645457 records.
[code]PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)|
| 0 | SELECT STATEMENT | | 625K| 341M| 45113 (1)|
| 1 | HASH JOIN | | 625K| 341M| 45113 (1)|
| 2 | NESTED LOOPS | | 611 | 14664 | 22 (0)|
| 3 | TABLE ACCESS FULL| FAX_SOURCE | 2290 | 48090 | 22 (0)|
| 4 | INDEX RANGE SCAN | GLOBAL_BU_MAPPING_BUID | 1 | 3 | 0 (0)|
| 5 | TABLE ACCESS FULL | FAX_STAGE | 2324K| 1214M| 45076 (1)|
PLAN_TABLE_OUTPUT
Note
- 'PLAN_TABLE' is old version
15 rows selected.[/code]
The distinct number of records in each table.
[code]SELECT FAX_STATUS,count(*)
FROM fax_STAGE
GROUP BY FAX_STATUS;
FAX_STATUS COUNT(*)
BROKEN 10
Broken - New 9
Completed 2324493
New 20
SELECT is_deleted,COUNT(*)
FROM FAX_SOURCE
GROUP BY IS_DELETED;
IS_DELETED COUNT(*)
N 2290
Y 78[/code]
Total number of records in each table.
[code]SELECT COUNT(*) FROM ORL.FAX_SOURCE FSRC-- 2368
SELECT COUNT(*) FROM ORL.FAX_STAGE--2324532
SELECT COUNT(*) FROM APPS_GLOBAL.GLOBAL_BU_MAPPING--9
[/code]
To improve the performance of this query I have created the following indexes.
[code]Functional based index on UPPER (FSRC.FAX_NUMBER) ,UPPER (FS.DESTINATION) and UPPER (FS.FAX_STATUS).
Bitmap index on FSRC.IS_DELETED.
Normal Index on GBM.BU_ID and FSRC.BUID.
[/code]
But still the performance is bad for this query.
What can I do apart from this to improve the performance of this query.
Please help me .
Thanks in advance.<I have created the following indexes.
CREATE INDEX ORL.IDX_DESTINATION_RAM ON ORL.FAX_STAGE(UPPER("DESTINATION"))
CREATE INDEX ORL.IDX_FAX_STATUS_RAM ON ORL.FAX_STAGE(LOWER("FAX_STATUS"))
CREATE INDEX ORL.IDX_UPPER_FAX_STATUS_RAM ON ORL.FAX_STAGE(UPPER("FAX_STATUS"))
CREATE INDEX ORL.IDX_BUID_RAM ON ORL.FAX_SOURCE(BUID)
CREATE INDEX ORL.IDX_FAX_NUMBER_RAM ON ORL.FAX_SOURCE(UPPER("FAX_NUMBER"))
CREATE BITMAP INDEX ORL.IDX_IS_DELETED_RAM ON ORL.FAX_SOURCE(IS_DELETED)
After creating the following indexes performance got improved.
But our DBA said that new BITMAP index at FAX_SOURCE table (ORL.IDX_IS_DELETED_RAM) can cause locks
on multiple rows if IS_DELETED column is in use. Please proceed with detailed tests.
I am sending the explain plan before creating indexes and after indexes has been created.
SELECT FS.*
FROM ORL.FAX_STAGE FS
INNER JOIN
ORL.FAX_SOURCE FSRC
INNER JOIN
GLOBAL_BU_MAPPING GBM
ON GBM.BU_ID = FSRC.BUID
ON UPPER (FSRC.FAX_NUMBER) = UPPER (FS.DESTINATION)
WHERE FSRC.IS_DELETED = 'N'
AND GBM.BU_ID IS NOT NULL
AND UPPER (FS.FAX_STATUS) =:B1;
--OLD without indexes
PLAN_TABLE_OUTPUT
Plan hash value: 3076973749
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 141K| 85M| 45130 (1)| 00:09:02 |
|* 1 | HASH JOIN | | 141K| 85M| 45130 (1)| 00:09:02 |
| 2 | NESTED LOOPS | | 611 | 18330 | 22 (0)| 00:00:01 |
|* 3 | TABLE ACCESS FULL| FAX_SOURCE | 2290 | 59540 | 22 (0)| 00:00:01 |
|* 4 | INDEX RANGE SCAN | GLOBAL_BU_MAPPING_BUID | 1 | 4 | 0 (0)| 00:00:01 |
|* 5 | TABLE ACCESS FULL | FAX_STAGE | 23245 | 13M| 45106 (1)| 00:09:02 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
1 - access(UPPER("FSRC"."FAX_NUMBER")=UPPER("FS"."DESTINATION"))
3 - filter("FSRC"."IS_DELETED"='N')
4 - access("GBM"."BU_ID"="FSRC"."BUID")
filter("GBM"."BU_ID" IS NOT NULL)
5 - filter(UPPER("FS"."FAX_STATUS")=SYS_OP_C2C(:B1))
21 rows selected.
--NEW with indexes.
PLAN_TABLE_OUTPUT
Plan hash value: 665032407
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 5995 | 3986K| 3117 (1)| 00:00:38 |
|* 1 | HASH JOIN | | 5995 | 3986K| 3117 (1)| 00:00:38 |
| 2 | NESTED LOOPS | | 611 | 47658 | 20 (5)| 00:00:01 |
|* 3 | VIEW | index$_join$_002 | 2290 | 165K| 20 (5)| 00:00:01 |
|* 4 | HASH JOIN | | | | | |
|* 5 | HASH JOIN | | | | | |
PLAN_TABLE_OUTPUT
| 6 | BITMAP CONVERSION TO ROWIDS| | 2290 | 165K| 1 (0)| 00:00:01 |
|* 7 | BITMAP INDEX SINGLE VALUE | IDX_IS_DELETED_RAM | | | | |
| 8 | INDEX FAST FULL SCAN | IDX_BUID_RAM | 2290 | 165K| 8 (0)| 00:00:01 |
| 9 | INDEX FAST FULL SCAN | IDX_FAX_NUMBER_RAM | 2290 | 165K| 14 (0)| 00:00:01 |
|* 10 | INDEX RANGE SCAN | GLOBAL_BU_MAPPING_BUID | 1 | 4 | 0 (0)| 00:00:01 |
| 11 | TABLE ACCESS BY INDEX ROWID | FAX_STAGE | 23245 | 13M| 3096 (1)| 00:00:38 |
|* 12 | INDEX RANGE SCAN | IDX_UPPER_FAX_STATUS_RAM | 9298 | | 2434 (1)| 00:00:30 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
1 - access(UPPER("DESTINATION")="FSRC"."SYS_NC00035$")
3 - filter("FSRC"."IS_DELETED"='N')
4 - access(ROWID=ROWID)
5 - access(ROWID=ROWID)
7 - access("FSRC"."IS_DELETED"='N')
10 - access("GBM"."BU_ID"="FSRC"."BUID")
filter("GBM"."BU_ID" IS NOT NULL)
12 - access(UPPER("FAX_STATUS")=SYS_OP_C2C(:B1))
31 rows selected
Please confirm on the DBA comment.Is this bitmap index locks rows in my case.
Thanks.> -
Hi
Is there any provision or api in MAC to open a file in shared mode same as windows
hUSBdrive = CreateFile(pDriveName, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING, FILE_FLAG_NO_BUFFERING, NULL);
we have the follwing scenario where a file is shared among two processes for read/write.one is running on Linux and the other one is running on MAC.where both the processses are reading/writing into the same memory location in the file say "X"
FAT 32 formatted raw data file which is located on the device, is shared among two processes.
One process is running on Linux device which is connected to MAC book through usb.In this linux process, the file is opened using fopen() and we have used fcntl() with O_DIRECT flag.This process continuously reads/writes data on memory location "X" in the shared file .
The other process is running on Mac which has simple c program that opens the file on the connected device i.e from usb drive and reads/writes data using fread()/fwrite().fopen() is used to open the file and FILE_NOCACHE flag is used to avoid caching.
The value at memory location "X" is updated by mac by using fwrite() and the linux process reads the memory location "X" by using fread(). Linux process is taking around 30 sec to get the updated value.
If the value is updated by Linux process at memory location "X" by using fwrite() the MAC process is also taking long time more than a minute to read the updated value by usng fread().
fwrite()/fread() on mac is taking long time where as the windows application which uses the same apis is taking msec time.
Do we need to use other api s or flags to open file?
thanks in advance.......does any one face this kind of problem?
fwrite() and fread() takes long time?
Is there any problem in read/write to a fat32 file on MAC? -
Hi,
RSPCM is taking long time to open at the same time RSPC is working fine
when I try to change the process chain status through RSPC_PROCESS_FINISH . it is executing for long time no response. I tried executing it backgrond also from past 2 days it is running, no progress.
Our basis team created index to all backend table of RSPCM, still issue persist. Please suggest me some to get rid of this.
Br,
Harishhi,
Please check the below thread
RSPCM T-Code was executing very slow
Please check note 1372931
hope it helps!
Edited by: Lavanya J on Nov 4, 2011 1:32 PM -
Sales order creation, standard event trigger is taking long time .
We have a requirement where we are sending data to CRM system using RFC function module. This data is sent while sales order creation or change. We have used standard event BUS2032.CREATED to trigger CRM FM in sales order creation mode. In sales order change mode, we are using custom event. In production system, our custom change event is getting triggered fine and data is sent to CRM system with small time lag of around 1 minute. But, while sales order creation, standard event trigger is taking long time ( sometimes about 20 minutes) in production system.
We tried triggering same custom event at the time of sales order creation using FM u2018SWE_EVENT_CREATE_IN_UPD_TASKu2019 as well but, still we are not able to improve performance of the event trigger at sales order creation.
Regards,
Sushee JoshiHI,
we have written SWE_EVENT_CREATE in update task
I think instead of calling in update task simply call to function module CALL FUNCTION "SWE_EVENT_CREATE" might trigger the event immediately.. Did you try to check in this way..
OR
And I also suggest you to check the entry in SWE2 txn with respect to your workflow tempalte, may be you have enable the option ENABLE EVENT QUEUE, this could be one of the reasons.. If it is enabled please disable it (uncheck)
Please check..
Regards
Pavan -
VB Macro in Bex Analyser is taking long time to complete execution
Hi Experts,
In a FI query , we have a VB macro which update the excel sheets by taking values from the previous excel sheets .
The issue is its taking long time for query execution and if we are keep on pressing 'ENTER' button . The query is running very fastly and is giving the results ,but its not a correct way to do.
Its a critical issue in Production and can anyone help me to resolve the issue.
Regards,
AnjuHi Anju,
I need to create a VB macro in one of my query but i not familiar how i can plug the VB code into the query.
Please can you give me some basic procedure on how to do that?
What i need to do exactly is to bring a KF from a query into another query. Not sure if this is possible using VB.
Let me know.
Thanks.
Cesar
Maybe you are looking for
-
How do I send emails in different fonts and letter sizes using Thunderbird?
I can change the print size when composing emails but the print in the actual email when sent remains the same. I am using the latest release with Windows 8.1 64 bit.
-
Help with editing audio files (please)
hi there, firstly sorry for posting in this section but i had no idea where else to do it. i recently went to an acoustic gig and recorded some songs from it using a sony ericsson phone. i have blue-toothed the files to my mac. there are a few songs
-
Please show blue bubble for contacts on the address book that have ios5
file:///.file/id=6571367.3355035Please show blue bubble for contacts on the address book that have ios5 installed so that we know who are ready for iMessage. We need a list of contacts in our address book for contacts that ios5 installed for iMessage
-
No problem if I install 10g and Forms and Reports 6i.
When I install Oracle 10g everything is ok, but when I install forms and reports 6i I have problem with netconfiguration and tns. I would like to know if they are compatable ?
-
Is there a DVD creator that retains the chapter markers that have been denoted in iMovie project and automatically link them to menu buttons? I understand that iDVD used to do this but it is no longer part of the iLife package on my new iMac. I dont