ITunes no longer recognize iPod or iPad, won't burn cds.

I've recently updated iTunes and it no longer recognises either my iPod or iPad mini. It also generates the "Registry settings used for importing and burning cds are missing etc" message on opening the program.
So far I've tried:
- Re-installing iTunes several times
- Stopping and restarting the Apple mobile device service
- Following the steps in the "iTunes for Windows: "Registry settings" warning when opening iTunes" troubleshooting guide, going into the registry key and adding in the GEARAspiWDM iTunes filter device.
- And reinstalling iTunes a couple more times
This doesn't seem to have had any effect - what's the next step I should take? I'm using Windows 8.

eta - I've also been following the steps from here but I've been unable to empty the Temp directory, even with no apps runnings, and attemping to verify the Apple Mobile Device USB driver is installed failed - the driver specified in the fix came up with an error that it wasn't compatible with my version of Windows, and there is no drivers folder in
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\.

Similar Messages

  • ITunes no longer recognizes iPod after "Enable Disk Use"

    I enabled the disk use on my iPod and now iTunes won't recognize it, meaning it doesn't appear in the source window and I can't disable the disk use and sync. The iPod only appears in the device manager as a USB storage device, but not in My Computer; the iPod flashes Do Not Disconnect. I've tried the 5 rs. Any advice/wisdom, anyone? Thanks.

    In Device Manager, change the drive letter of the device, use M.

  • ITunes no longer recognizes iPod mini

    Things with my ipod mini have been going downhill lately. Along with reduced memory (down from 4G to 3.77G last time I checked) and a weaker battery life, then it had when I first bought it. Now for the first time, the ipod is NOT SHOWING UP IN iTUNES! I realise the thing is getting old (almost 2 years) but I'd really rather not replace it yet, until it totally craps out on me and stops working (is that time coming soon?).
    When the device was new and I connected it to my PC via the usb port, iTunes would open and the mini would be displayed on the left hand menu. Now it isn't showing up at all, I've given it some time, and it still isn't present. The mini beeped a few times when I first connected it, and the logo showed the cross circe with the "do not disconnect" logo. and then it went to the battery filling, only the graphic does not show the battery filling with the logo "charging" as it used to but instead the battery is 1/4 full and there is no movement in the graphic. Every once in a while it flashes back to the "do not disconnect" and beeps before returning to the battery graphic.
    The iPod is of no use to me if I can't update music on it, unless I want to listen to the same songs over and over, but I'd really like to be able to update them, that's what I bought it for. Last time I charged it via the usb port on the computer it had difficulty (it did show up though) and I thought it had to do with my music library finally exceeding the mini's limits. The mini wouldn't charge and instead kept trying to update the libray of music, when it was too much for it to handle. I managed to go around the obstacle by deleting music off of it and dragging new music from my library onto the mini's icon in the menu (then it was in the mini's music.
    After that incident I haven't had a need to update music on the mini and I have charged it using outside ports, which have work normally with the mini behaving like it used to and charging completely.
    I'm hope my post is understandable, I'm not a very technical person, so my language might be amatuerish. I really would like to enjoy my mini again though so any help is appriciated.
    Thanks, Ashley

    Update: I disconnected the mini for a while and just now tried re-connecting it. This time the ipod showed up in the menu after a minute or two. It still doesn't want to charge through the usb, but I can continue to use the wall port for that if I have to. Good news is I can now update my songs again =)

  • Mac and iTunes no longer recognizes ipod shuffle

    All of a sudden, my iTunes doesn't see my iPod shuffle (2nd gen) anymore. It also doesnt appear on the desktop.
    When I plug it in, the little orange light flashes, so it is charging. And the ipod itself still works.
    I tried all the steps in this document, including updating iTunes and restarting my mac. I know the USB works because the iPod charges.
    https://www.apple.com/support/ipodshuffle/assistant/itunes/#section_4
    what can I do?

    Update: I disconnected the mini for a while and just now tried re-connecting it. This time the ipod showed up in the menu after a minute or two. It still doesn't want to charge through the usb, but I can continue to use the wall port for that if I have to. Good news is I can now update my songs again =)

  • ITunes won't recognize iPod nor iPad since upgrade to 10.6.4

    After upgrading to 10.6.4, iTunes no longer recognizes any of my devices. iPhoto does, so the issue has to be within iTunes. I'm current, with 10.0.1.
    Any advice?

    Same here: junk Apple upgrade has stopped me accessing many apps. It appears to have stalled out.
    Is this the Steve Jobs legacy?
    "The iPod ------- could not be synced because the sync session failed to start."
    What sort of error message is that?
    It has just been through a complete restore and given the same message!
    It has also lost a load of Apps that I have paid for and cannot use, nevermind material bought from the Apple Store.
    What sort of rip off artists are these Apple dead beats?
    Do I have to pay twice when they upgrade my Ipod?

  • I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it.  Any ideas?  I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.

    I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it.  Any ideas?  I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.

    Looks like its fixed.     I am syncing it now.      A lot of the answers are for the new iphone so i had to mess with a bunch of settings as well.  My old phone is now an 8 gig ipod.  the books app no longer works and that *****.....but better than nothing...

  • ITunes no longer recognizes my iPod nano 5th gen.  When plugged into macbook usb it appears as my iPhone.  Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

    iTunes no longer recognizes my iPod nano 5th gen.  When plugged into macbook usb it appears as my iPhone.  Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

    Hello BPeery,
    I would go through ALL the steps here:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    Let us know how it goes.
    Hope this helps.
    ~Julian

  • Since upgrading to Windows 8.1, iTunes no longer recognizes my iPhone or iPad.  I tried to reinstall iTunes.  That did not address my problem.  Any suggetions on what I should do?

    Since upgrading to Windows 8.1, iTunes no longer recognizes my iPhone or iPad.  I tried to reinstall iTunes.  That did not address my problem.  Any suggetions on what I should do?

    Hey Bob0725!
    Here is an article that will help you troubleshoot this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • Updated to ios 6.1.5, itunes no longer recognizes any ipod  - now only shows the "wishlist" button...

    updated to ios 6.1.5 yesterday
    itunes no longer recognizes any ipod 
    now only shows the "wishlist" button where the "ipod" button used to be in order to sync with itunes.
    any help?

    it is itunes version 11.1.4.
    I have tried three different ipods and none are recognized by itunes...

  • Both iPod and iPad won't connect after update.

    Both iPod and iPad won't connect after update.  iTunes says "can't allocate a resource"

    I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
    Follow these steps to reset the Lockdown folder:
    Disconnect all iOS devices from your computer and quit iTunes.
    From the Finder, choose Go > Go to folder.
    Type the following and then press Return:
    /var/db/lockdown.
    The Finder window should display one or more files with long alphanumeric file names.
    In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
    Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
    Reconnect your iOS device and open iTunes
    My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing.

  • IPod files keep getting erased + iTunes no longer detecting iPod

    For the fourth time now I have plugged my ipod into my pc only to have all the files wiped from its harddrive. This was not such a big deal as I could just resync all the files, except now iTunes no longer recognizes my ipod (windows does, however).
    How can I fix this?

    Yes, I've gone through all those steps.
    Just to be clear, have you tried reassigning the iPod's drive letter as explained in the "related document": Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear ?

  • ITunes no longer recognizes my iPhone 4

    I have had 3 iOS devices connecting to iTunes on Windows for more than 4 months.  For some reason iTunes no longer recognizes my iPhone 4.  My iPad and iPhone 4S still work as they should.  Windows sees the iPhone 4, but it never shows up in iTunes.  I followed the advice for getting services restarted in Windows, but since it's only one device that's an issue I'm thinking there may be an issue in the iPhone 4.  Ideas?

    try this, it worked for me...
    http://support.apple.com/kb/TS1538

  • Brand new Ipod touch bought yesterday - Screen is frozen with an itunes emblem and cable. Unable to refresh or restore ipod. Computer and itunes does not recognize ipod.

    This is first Ipod for me  - I have had less than one day. Screen is frozen with itunes emblem and cable. Unable to refresh/restore or do anything with ipod. I turn off/on and get the same frozen screen. My computer does not recognize ipod. Itunes does not recognize ipod so I cannot restore.... Should I take this ipod back and get a new one? Is this normal?

    Before you can use the iPod you have to activate it by connecting it to a computer with iTunes.  Try the following to get your computer to see the iPod so you can activate the iPod.
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • After changing disc drive letter iTunes no longer recognizes Cd's

    I changed my disc drive letter from G to A, & now iTunes no longer recognizes Cd's but when I change it back to G, iTunes recognizes Cd's again.
    I've done a full reinstall of all apple software components but still won't recognize disc drive set to drive letter A even after reinstalling iTunes with drive set to letter A.
    I've looked at all the help documents & nothing relates to this particular scenario.

    I've done a full reinstall of all apple software components but still won't recognize disc drive set to drive letter A even after reinstalling iTunes with drive set to letter A.
    Traditionally, in Windows, the A drive letter has been reserved as one of the two floppy drive letters (It's actually the letter reserved for the boot floppy ... which is why most floppy drives on relatively-modern-machines-that-still-have-a-floppy-drive are B drives, since the C hard drive is usually the boot drive.)
    So I'm not surprised you're getting erratic sorts of behavior from a A:\ drive that isn't a floppy. If you need to change your optical drive letter, try perhaps an H or higher letter.

  • How do I use the same Itunes for both my IPOD and IPAD?

    How do i use itunes for both my ipod and ipad? and have everything on both of them.

    You can connect one of them to your computer's iTunes, select it on the left-hand side of iTunes, and then on the right-hand side select the Music tab and choose what to sync to that device - you can then connect, select and sync the same content to your other device.

Maybe you are looking for

  • RFC Adapter

    Hi I am using RFC adapter, I am facing java.lang.outOfMemory Exception whenever payload size increases. Important point: In XI everything is successful.                  But in R-3 I am facing the problem. Please guide me, how to solve this issue. Pi

  • Issues in mapping objects from java to flex - using flex4

    Hi, I have a class in java which i want to send to flex4 using BlazeDS as middleware. There are a few issues that i am facing and they are: When sending the object across (java to flex), the properties with boolean data type having value as true gets

  • RFC Lookup's in message mapping fail with RuntimeException for no reason

    Hi guys, We have developed interfaces that execute a lot of RFC's from Message Mapping, by making use of RFC Lookup API. In ID, in the corresponding RFC Receiver Communication Channel we have set the number of maximum connections to 100. However, whe

  • My carrier isnt showing on my new iPhone?

    I just got a new iphone, and everythings being put back on to the iphone, but my carrier isnt showing up. Therefore I can't send any texts please help!

  • Error when opening configuration manager in the administration workstation

    Hello, For some reason I get this error everytime I try to  open the configuration manager on the administration workstation. The error says "(-9934) Unable to initialize the real-time feed for instance cdi. Unable to proceed until the real-time can