ITunes no longer works after installing IOS7

iTunes does not work after installing iOS 7

Try switching the "Block cookies" setting in Safari from "Always" to "From third parties and advertisers" and then reboot.  This worked for me without having to reload iOS7 or reset all settings. Good luck. 

Similar Messages

  • Itunes no longer works after installing 11.1.4

    I installed Itunes 11.1.4 and noww ITUNES will not work. I have uninstalled all apple products and reinstalled, No Luck I have even tried a system restore point three different dates still no luck. I have even gone to Filehippo web site and tried to install earlier version and no luck there either. I have tried installing running as adminstrator no luck. OK I think I have covered all the options I have read in the forum and welcome anyone who has a better idea.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • IPhone 4s email sending no longer works after installing ios7

    Installed ios7 on my iPhone 4s and now email is completely fouled up. I have deleted all accounts and reset them, have turned off and restarted my phone severeal times, Oddly enough I can receive email, but when I try to answer I get the message "Cannot send mail - the recipient was rejected by the server". I have checked all of my settings and they are correct (use the same settings on my computer and iPad, which work fine).  Same problem when I try to move messages to trash - I get the message "Unable to move message".

    Try switching the "Block cookies" setting in Safari from "Always" to "From third parties and advertisers" and then reboot.  This worked for me without having to reload iOS7 or reset all settings. Good luck. 

  • Itunes no longer working after installing Tiger

    Hello... quick question for everyone.. I updated my older mini mac OS to Tiger this afternoon but now when I try to open itunes I get the following message.
    Itunes requires mac OS X 10.4.9 or later
    Did I just lose all my years of music or is there a way to correct this issue???
    Thanks!
    Dan

    I would recommend downloading the combo updater. The combo package takes you to 10.4.11 in one step. Downloading means you have it on your computer and can run it using your installer instead of Software update.
    I always recommend backing up before doing any kind of update should something go wrong.
    Boot from your install disk and verify your drive with Disk Utility. Repair it if necessary. Also repair permissions.
    Run the updater, then repair permissions again. I think many of the problems seen from people after running updaters is due to their not running them on a drive in good condition.
    The 10.4.11 combo update links for [PowerPC-based Macs|http://www.apple.com/support/downloads/macosx10411comboupdateppc.html] and [Intel Macs|http://www.apple.com/support/downloads/macosx10411comboupdateintel.html].
    Message was edited by: Limnos

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • My ImageClass MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. How can I resolve this?

    My Image Class MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. I have checked with Cannon and they do not list my partricular machine among their driver updates. Is there another place to download a driver suitable for Mavericks?

    Your MF4380dn is supported by the latest UFR2 v10.4.0 driver that supports 10.9. Here is a link from the Canon Australia web site,
    http://support-au.canon.com.au/contents/AU/EN/0100491502.html
    Before installing this driver, please remove the MF4380 from Printers & Scanners (unless you have already performed the reset that Carolyn mentions which will remove it for you). Then run the v10.4.0 installer and when it has completed, open Printers & Scanners and add the MF4380.

  • Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

    drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

    Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

  • My telus email no longer works after installing the new os Yosemite

    my telus email no longer works after installing the new os Yosemite

    This is a problem between Telus and Yosemite.  Telus, of course, blames Apple. 
    Check the box that says "Allow insecure authentication"  That will get your email working.
    However, this box will get un-checked when you stop start Mac Mail.  The next time you start Mail, you'll have to re-check it for each Telus account.  (This is the bit that Apple needs to fix.) 

  • Many of my System Preferences will no longer work after installing Mountain Lion. Software update, startup disk, iCloud, etc. no longer will launch. I keep getting a drop down window saying I must restart system preferences in order to use. No go!

    Many of my System Preferences will no longer work after installing Mountain Lion. Software Update, Startup Disk, iCloud, Time Machine, Notifications, etc. no longer will launch even though they do show their icons in the system preferences window. I keep getting a drop down window saying I must restart system preferences in order to use with a "Cancel" or "OK" choice. After I click on "OK" the window just keeps reappearing with the same choices and the pane I wish to use still remains inoperative. Third party preference panes DO work.
    Reinstalling OSX Mountain Lion did not help. Neither did throwing away preferences.plist.

    Hi Jeff,
    Tried to reply with my iPhone but not easy! Anyway, back on the laptop now. Yes the crash was bad but Tek support at Prism Sound was really good. In the end I rebuilt the whole system on a new disk which took a couple of days with all the plugins, softsynths etc.... but there seemed to be no alternative in my case, and this was agreed with Prism sound as being the only alternative left to me. I still don't really know what caused the crash but ML and Orpheus are both working fine now. Let's face it, you'll have to update at sometime..maybe best to pick some time between projects On balance, I suspect that my problems were unique to my system and that your installation will go ok.
    Hope it goes well,
    Rick

  • Some USB ports no longer working after installing Mountain Lion?

    Some of my USB ports are no longer working after installing Mountain Lion onto my 21' 2011 iMac. I used to plug in my iphone 4S and charge it, or transfer files onto my iPad but none of the ports no longer work to do this. Funnily enough, other equipment plugged into the works. I have tried changing the cable. Any ideas?

    In my experience, the USB ports on the back of an Apple monitor can be re-enabled simply by unplugging and plugging back in the device in question. You might also check to see that the USB Monitor hub shows up in System Profiler. My Apple monitor USB ports experienced no changes in moving to 10.4.7.
    bd

  • Itunes no longer works after latest update

    I updated the latest version of iTunes. Now, it no longer works. Then my computer told me to update the latest version, so tried again, but again it didn' work. So in uninstalled iTunes and tried to install it again. It didn't work. I even tried with an older update after I had deleted the latest one and it didn't work. Now my computer tells me that some file or stuff was missing.
    Thanks for any help!

    ...now my computer updated it again. It opened, tried to collect information about the copyright, the an error message popped up saying that iTunes does not work correctly due to any mistake...
    Please help me!

  • COM interface no longer working after installing version 7.6.2.9

    I wrote a VB6 application a while back that has always worked fine for me. It referenced the COM interface (iTunesApp type library) of iTunes.exe to pause/play the music when a certain hotkey is pressed among other things. But after installing the new version of iTunes (7.6.2.9) it no longer works. It fails trying to create the iTunesLib.iTunesApp object. I don't remember the version number of iTunes that I had installed before that worked, but it I always keep it up to date, so it was the most recent one before this one. iTunes itself is running fine, but as far as I can tell, iTunes.exe no longer has a COM interface at all (you can't even register it with regsvr32 because it doesn't expose a DllRegisterServer routine).

    OK, before you dive any more into the registry, a simple question. Did you try uninstalling iTunes, rebooting, and re-installing iTunes?
    I do have an entry for 'iTunes.Application.1' (below). However, I'm sure there are many more registry entries related to iTunes. In other words, adding this entry will probably not be sufficient to restore the COM functionality.
    Windows Registry Editor Version 5.00
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}]
    @="iTunes Class"
    "AppID"="{F98206B5-F052-4965-9FA0-85F61BC3C19D}"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}LocalServer32]
    @=""C:\Program Files\iTunes\iTunes.exe""
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}ProgID]
    @="iTunes.Application.1"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}TypeLib]
    @="{9E93C96F-CF0D-43f6-8BA8-B807A3370712}"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}VersionIndependentProgID]
    @="iTunes.Application"

  • Password no longer works after installing 4.0.3 !

    Brand new Mac mini running 10.10.2. I downloaded the new OS X Server v 4.0.3 app and all installed fine..
    I even created a share and transferred some test data okay...
    But my main login password on longer worked when I went to go access something in System Preferences!  I also couldn't use it to access the server via Screen Sharing as I had before I installed it ...and after a restart, I couldn't use it to log into the Mac!!  Meanwhile Safari kept crashing ...!  Infuriating !!  But yet it worked when I went to go log into the Server application.  ??? This used to be a piece of cake to install.  What happened to Server.app ???
    So I've decided to wipe the system and not use this awful 4.0.3.  I'll just use regular old File Sharing for now.  So annoying, but I can't have it act like this, I've wasted too much time.  It's like I'm running a beta.
    Is 4.0.3 just bug-ridden or what ?  What happened to my system's password ???
    Bad job with this one, Apple.

    At upgrades or major updates I have seen the behaviour that remote access via Server.app and remote access with Screen Sharing/Apple remote Desktop are reset to "not allowed". That only explains remote access not local access though.

  • ITunes no longer working after Song Upgrade.

    I got onto iTunes store, was offered to upgrade 32 of my songs, I said "Yes". After the upgrading completed, iTunes main window pane no longer worked for anything but the iTunes store. It will play my music if I manually select it from the disk (via Finder) but does not seem to be able to display any of my playlists or my music library.
    I am running Safari 3.0 (as an FYI).
    Mac OS X 10.4.9 (on an intel mini).

    Unfortunately uninstalling and reinstalling, or repairing the current copy of iTunes alone doesn't fix the problem....
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • External monitor no longer works after installing iLife '09

    Before, the external monitor (Apple Cinema HD display) connected via DVI to Mini-DVI adapter was working fine. However, after installing iLife '09 and restarting, the iMac will no longer detect the external display attached to it. I even tried installing a different (but same model) display but it still will not detect.

    I'm not sure how installing an application would cause that to happen. Have you shut down (powered off) the iMac completely, and then restarted, since this problem occurred?
    Some display settings are stored in PRAM, so if you have not already, try resetting PRAM
    http://support.apple.com/kb/HT1379
    If that does not help, you can try disconnecting the iMac from power and reconnecting it, using the reset SMC (power management) procedure.
    http://support.apple.com/kb/HT1543
    When you reconnect it, initially connect the iMac to a wall outlet, by itself. Leave all peripherals disconnected, except for your USB keyboard/mouse. Make sure it is working properly, then connect only the external display.
    If it still does not work, as a test, start up with your Mac OS X installation disc. You are not installing anything, but note if the second display is displaying the background image or not when you are booted from a different system.

Maybe you are looking for