Itunes not detecting iphones but detecting ipod
I have re-installed iTunes on Windows XP but it does not detect any of two iPhones 4, but it does detect my iPod. The camera wizard does, howver, detect both iPhones as cameras. Apart from re-installing iTunes I have also stopped and restarted the Apple Mobile Device Service and following up on another lead on the web deleted Bonjour, but still no iPhone detection.
Hi,
Perhaps this link may be Helpful...
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
and these:
iPhone, iPad, or iPod touch not appearing in iTunes
From Here:
http://www.apple.com/support/itunes/devices/
Similar Messages
-
Itunes not recognizing iphone 3gs or ipod touch 4th gen
My two sons ipod touch 4th generations were not being recognized by itunes, (they were previously, and I have not changed anything). I went through apple supports steps up to uninstalling and reinstalling itunes.
They are still not being recognized and now my iphone isn't either.
The computer sees them all and asks if I want to download photos from them etc.
itunes is seeing my ipod shuffle and my 2nd gen ipod ok.
My iphone and the ipod touches are running on version 4.3.5.
HelpDid you check if Apple Mobile Device Service is still active? iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
-
My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Ive deleted something, not sure what but my Ipod connects then disconnects. It doesnt come up on my Itunes or 'My Computer' Whatever happened, it deleted my music of my pod! Someone pleaseeee HELP!
1. Ipod connects then disconnects
2. Ive deleted my Itunes then d/l the new Itunes
3. Ipod doesnt show up in Itunes
4. Ipod doesnt show in 'My Computer'
5. Ive reset my ipod
6. Ive put it in Disc Mode
& after all of that still nothing except an ipod that works but with no songs or videos!!
HELP ME AHHH!!
ThankyouDo the iPod Disk Diagnostics as posted by tt2, it wont fix your problem, but helps in troubleshooting.
Post the results, so we will try to help. -
I need to download itunes on my iphone but I do not have a homecomputer is there another way I can download itunes?
I saw the App on my phone but I am not able to completely connect to the store. I can buy songs or movies but each time I try to connect to Ping an error message appears "Cannot connect to iTunes Store". I assumed I needed to download iTunes.
-
I can't get my ipod touch to sync with my new computer. My old one died. I downloaded itunes and installed music but the ipod will not sync with this new computer. What do I do?
You can only sync with one iTunes library/computer. To switch:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
Wirelessly iTunes see my iPhone, but not my iPad
wirelessly iTunes see my iPhone, but not my iPad???
You do NOT have to plug the iPad into a power source to sync with WiFi. I sync without plugging my iPad every day. Like Dah-veed, I do not auto sync. If you have all of the settings configured correctly, the iPad does not have to be plugged in to a power source to sync with WiFi.
The iPad will sync AUTOMATICALLY, if the iPad is plugged into a power source and if iTunes is running on your computer. It does not have to be plugged in to sync manually.
When is set up to sync wirelessly - I made the selections like Dah-veed indicated above and then I clicked on Apply in the lower right corner of iTunes to lock in the setting. You have to apply the changes that you make in the iTunes sync process.
BTW - I have the original iPad - not the iPad 2. -
Connect the device to your computer.
Open iTunes.
Select iPhone, iPad, or iPod in the Devices list.
Click the Summary tab and select "Manually manage music and videos".
Click Apply.
than it says it'ss erase my iphone and sync with itunes library.
what should i do?It wil only erase the music and videos. Nothing else.
-
I just sync my apps from itunes to my iphone but app don't show up on my phone
Please help me i just sync my apps from itunes to my iphone but app don't show up on my phone
I thought I resolved it, but the problem came back! And this time, re-starting Muse didn't help.
I was creating a vertical line to separate the sidebar from the main area, and when I extended the line down to where the footer guide is, the page started to expand and the navigation bar at the top started growing, while the links disappeared again. Now all links from the master page are again missing from every page but the master.
When I undid it, the navbar went back to its normal depth, but the text links in it did not return.
Any thoughts on how to fix this?
Also, it really wasn't my intention for the navigation bar to grow vertically as the page grows. Is there a way to prevent that? -
ITunes not recognizing iPhone 5 iO7 on Windows 7
I have exhausted myself dealing with this problem. My iTunes will not recognize my iPhone 5. I am running Windows 7 64 bit and my computer recognizes the phone when i plug it in, however, my iTunes does not so I am not able to sync any music. I have tried practically everything I have found on the internet to fix this problem and even the people at the Apple store could not help me with my problem. I have uninstalled and installed all Apple related programs, I have insured that the Apple Mobile Device USB Driver is working correctly but nothing seems to fix the problem. I just don't know what to do anymore because nothing seems to work. I have followed the suggestions contained in the following discussions but nothing seems to work. Thank you for your help.
Referenced discussions:
https://discussions.apple.com/thread/3121604?start=0&tstart=0
http://support.apple.com/kb/ts1538golds04
Re: iTunes not recognizing iPhone 5
Feb 16, 2014 7:45 AM (in response to oryyx)
Had this problem this morning.
Once in the past had to erase my iphone and reload it.That was unpleasant.
This morning had the problem,too.
Plugged in my iphone directly into the Imac (not hub) then clicked shut down on the imac.
Pressed the button in the back while the iphone was still plugged in-and when rebooted iphone was visable in itunes.
Hope this helps.
Thanks so much for your suggestion. I'm using a MacBook Air and I just tried this with my laptop - shutting down the computer all the say (not restarting it) and then booting it back up with the phone plugged in. It didn't work but it was worth a shot! Thank you!
Jen912 wrote:
I had this exact same problem and just figured out how to fix it. I had to reload the driver on the iphone5 in order for itunes to recognize the device. Follow the steps here to see if you might need to do the same thing. Once I reinstalled the driver, everything works fine and I'm now able to sync with itunes again.
http://support.apple.com/kb/TS1538
Thanks for the suggestion, I have seen a TON of posts like mine where this is the solution. Unfortunately, I am on a Mac not Windows so the driver isn't the problem. -
Match not updating iPhone but fine on iPad?
Match not updating iPhone but fine on iPad?
I've added songs to iTunes on my Mac and updated Match, they show fine on my iPad but not on my iPhone.
Show all songs is on and i've reenabled Match on my phone and on my Mac numerous times but for some reason Match won't add new content to my iPhone.
any ideas?
Thanks.HeIlo Brian, thanks for the help. I couldn't find any email setting in the iPad settings for "signing out" of an account, only deleting (which I've done already), but I did go into the Yahoo account setting on the iPad, and slide the green Mail slider across to "disconnect" it (while leaving the others). I then went to my Mail and saw the "Yahoo, Google, etc." mail setup screen. I then went BACK to settings and slid the mail slider back "on" again. When I returned to Mail, first I saw ""***Orphand Mail Account" at the top of the screen...And then it reloaded and all is well...my mail is back. Thanks for putting me on the right track!
-
I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?
iTunes 11 is compatible with
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
Try:
Trouble installing iTunes or QuickTime for Windows -
My question is about the 'Restore Backup' option on iTunes (Not 'Restore iPhone'). So, if I click on Back Up Now, then 'Restore Backup', would that go through the process of erasing everything on my phone as new then restore whatever iTunes has backed up?
I do not want this to happen, as with previous experience iTunes doesn't restore a mirror of what the iPhone was when it was backed up as is the case with iCloud backups.
What I am trying to do is, as I've found a method on Youtube, there is an application where I can delete all the multimedia saved in my 'iMessages' so clear up some space. As doing that manually through the phone would take a lifetime. The method is to backup on iTunes, then using the backup created, importing that into the application then deleting the messages through that then restoring the phone using that amended backup.
So back to my question, would restoring through 'Restore Backup' just restore the backup internally or would it flush the entire phone and then restore the backup? And if it does so, what would be lost in the restore?
Thank you all,
FahmidiCloud should overwrite your phone with the data stored in your account, preserving your newer data. However, to be sure I would go to Settings>iCloud and turn data syncing to Off before restoring the backup. Then, after restoring the backup, turn the data syncing back to on, and when prompted about Merging with iCloud, choose Don't Merge. This will ensure that the data in your iCloud account overwrites the data on your phone (which is your goal).
Also, you don't sync text messages with iCloud so you will end up losing your more recent messages when they are overwritten by the backup. -
I have a friend that just got a new cell phone, it's not a iPhone, but the person that use to have the number that she got did! I can't message my friend, they go out as iMessages to the other person! How can I fix this without turning all my iMessages off?
She needs to call the carrier on her old iPhone and have it removed from her account.
Once she does that you will not be able to use iMessage because that only works Apple to Apple.
You will need to use something else like Skype instead.
Allan -
itunes not recognising iphone 3GS. iphone is in a loop of searching..with image of connector to "itunes" on screen. Very frustrating - please help
Check first if your iTunes is up-to-date. If it's updated, try using a different cable or try plugging it to a different USB port.
Maybe you are looking for
-
Premiere Elements 11 won't launch at all.
I installed Premiere Elements 11 from a disk that also has Photoshop Elements. Photoshop Elements launches successfully. When I try to launch PE 11, either from the Start menu or the desktop icon, I get the round "swirl" for a moment, then it disappe
-
Split a TOC over pages: page break in a table of contents
I'd like to be able to put a page break in a TOC. I have a TOC spans a couple of pages. The second page only has a couple of lines in it, so I want to be able to split the TOC on TOC heading 1 with a page break. I know that I could adjust the styles
-
Variable contents inside "EXECUTE IMMEDIATE" not working properly.
Hello, I have the following package: CREATE OR REPLACE PACKAGE "BACKUP"."PKG_BACKUP" IS PROCEDURE BACKUP_TABLE (TABLE_NAME IN VARCHAR); END PKG_BACKUP; CREATE OR REPLACE PACKAGE BODY "BACKUP"."PKG_BACKUP" IS PROCEDURE BACKUP_TABLE (TABLE_NAME IN VARC
-
Problem with scheduled message in SXMB_MONI
Hi All, I have come accross an issue. There is a scheduled message in SXMB_MONI(with green flag). It's been there at for a long time.I can see a inbound queue name in the SXMB_MONI display. But if I am looking into the que from SMQ2, there is no pend
-
Introduction of User Interfaces in SAP CRM
Can someone tell the progression on how the SAP CRM User interfaces (UI) were launched? for example, which CRM versions supported which UIs (PCUI, WEBUI etc) Thanks or else, is there a documentation that provides differences and commonalities betwe