ITunes - not enough memory to run this program [Solution]

After upgrading to iTunes 7, if you install UNO - Unified GUI and use any option apart from 'Default Aqua' under the iTunes GUI choice you will get this error.
Note this does not make a difference if you have already modded the itunes GUI using UNO and upgrade, only if you run UNO after installing iTunes 7.
Just had this problem myself, took a couple of minutes to realise why it happened.
Solution: re run UNO revert to default Aqua for iTunes, and reinstall iTunes.

in my case i have no UNO installed on my machine but i get this error when i tried to run itunes 7 for the first time since i upgraded
how could i get itunes to run in my machine, i have 512mb of ram and it's enough to run soem applications like flash, photoshop fireworks etc etc so why it's not enough for itunes?
si mi ingles es muy anemico aqui esta lo que trato de decir:
en mi caso no tengo uno instalado en mi maquina pero obtengo el mismo error cuando intento correr itunes 7 despues de haberlo instalado tengo 512mb de ram y me da el error de que no hay memoria sufucuente para ejecutar la aplicacion alguien tiene idea de por que es esto?
de antemano gracias
pd.
1,6Ghz pentuim 4 willamette "SSE2" en otra makina da le mismo error en tiger 10,4,6 pero las demas apicaciones corren sin problema alguno

Similar Messages

There is not enough free memory to run this program

Hi all,
I am running into an issue with OfficeXP SP3 that has been virtualized using ZAV 8.0.1 and registered using the msi method. First, when you try to open a document from a web browser (Firefox in my case) it will open the downloads window and show the file but never launch the virtualized Office. Then if you try double-clicking on the document in the downloads window, nothing happens. If you open the folder that the document was saved to and double-click on it nothing happens. If you go into open with and choose the virtualized officexp it gives this error: "There is not enough free memory to run this program. Quit one or more programs, and then try again."
Now here is the really odd thing, you can double-click on a word/excel/etc document in MyDocuments, a network drive, anywhere and it will open the appropriate officexp application just fine. I will also mention that firefox is virtualized as well but the same process works fine with openoffice.org.
This also happens if you choose to save the file to a specific location. It cannot be opened. However I just discovered that if you move it to somewhere else, say the desktop, it will open just fine.
Anyone have an idea what might be causing this issue? Is it somehow related to the sandbox?
Thanks,

Look in the class section of the registry for the FF virt app... See if some of the same extentions are in there.
I would guess that FF has its own file associations for those document types and that is whats failing.
If you remove the file association conents (but leave the folder and set isoation to writecopy) then the FF virt should be able to view and use the workstation file associations for the virt XP.

Error on running LV application-not enough memory to complete this operation

Hi,
Developed an application for multi plot graph.
The graph is having around 25 plots and and its fetching many records from the database for the pltting purpose.
This LV application is a module of a VB real time application which is running always on the PC.
Now when the user tries to plot the graph...some times he is getting an error message as the following
"not enough memory to complete this operation"
What are the reasons for such an error message and how do i eliminate this error?

LabVIEW cannot allocate the memory needed to complete the task at hand.
Prevent data copies of large datasets.
Reduce the amount of data in your graphs. (Not all point can be seen as individual points, if the scale is from 0-1000 you can plot 1000 points, but with the scale 0-1000000 you can also have 1000 point instead of 1000000 and see almost no difference.
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Not enough memory to print this document

Hello all,
I am trying to print tax forms, something I have done for years with no problem. I used a popular tax program to create a PDF file, copied this file to my G3/266 running Mac OS 9.1, and opened it using Acrobat Reader 4.0. Several pages show X's in boxes where the characters should be. I assume this is a font problem with Acrobat Reader 4.0, so I opened the file using Acrobat Reader 5.0, and all pages are rendered properly.
Once I tried to print, I remembered why I have been using Acrobat Reader 4.0: I've never been able to print from version 5.0. When printing from version 5.0, it spools to disk for background printing, then gives a warning: "Not enough memory to print this document". I tried printing the first page of Acrobat Reader's help pages - same problem. Here's a list of what I've tried:
Background printing on & off
Acrobat Memory: 12,288 KB (Suggested), 24 MB, 128 MB
Print Monitor: 16,384 KB, 128 MB
Always the same error.
My G3/266 has 768 MB of RAM
The printer is a LaserWriter Select, which is why I use Mac OS 9.1 to print.
Any ideas how to fix the font problem so I can print form Acrobat Reader 4.0 or how to make Acrobat Reader 5.0 print properly?

Hello Robert,
Thanks for the reply.
In Mac OS 9, the minimum and preferred memory allocation limits may be set by the user. By selecting the application's icon and selecting "Get Info", a panel provides these fields. The application always shows a suggested memory size. Acrobat Reader 5.0 has a suggested memory size of 12,288 KB, I tried raising it to 24 MB, then again to 128 MB. My computer has 768 MB of RAM.
I used TurboTax 2012 running under Mac OS 10.6.8 to create the PDF file by selecting the "Print Returns to Mail" button. It pulls up a system print window with the PDF button, from which I select the "Save as PDF..." option. On my Mac OS 10.6.8 system, the only printer listed in this window is the "Photosmart C4700 series [B6D0EB]", but this has always been the case, and is what I have always used to print.
I have opened the PDF file, created as described, using Preview, and used "Save As..." to save a new copy, using the "Black & White" Quartz filter, since this version of TurboTax wants to use colored tax forms. This should give me a PDF that is entirely created by Mac OS 10.6.8. I have also opened that PDF file again, and done a "Save As...", using the "Create Generic PDFX-3 Document" Quartz filter. I get the same errors when I try to print either PDF file.
How does one ask the moderators to move a post?
Scott

Not enough memory to complete this operation windows 8

Hi All,
I have a problem whith a built executable where at random intervals I get a windows dialogue saying "Not enough Memory to complete this operation"
I have searched through the forums and although there are similar posts I have not been able to get rid of this message by trying several things. My project is a cRIO which connects and disconnects using the STM messenger service. The HOST computer is a Producer consumer design pattern, the crio is a producer consumer with the producer being incoming TCP IP messages essentially. The windows 8 machine shows no signs of running out of memory. There is plenty available (8GB) and during normal execution the program is only using roughly 200MB and is stable.
Some of the things I have tried from reading similar threads but have had no luck.
Put a delay in TCP Send function from the cRIO (1mS).
Disabled all writing to files for polled data / results.
Run in windows 7 and XP compatibility mode and as administrator.
Move whole executable into my Documents after suspecting file permissions.
Made whole of install directory full access permissions.
Disabled firewall and uninstalled anti Virus as its not connected to T'internet.
Monitored cached data and disk writes using perfmon.
Monitored Threads and seem stable.
This build was also tested on a windows 7 machine and has been run overnight with no problems. the executable also runs on my development machine with no problems. The windows 8 machine has no NI max installed (Just the RT engine), the windows 7 does along with VISA drivers etc.
When the "Not Enough...." Dialogue appears the exe hangs untill the prompt is removed. Once the dialogue is removed the TCP Queue then catches up with Queued data so I know that there are no queues increasing in size (It has happily stored all polled data from an overnight run and then dequeues all this information to the front panel no problem)..
Build PC:
Windows 7 (64 bit) - LabVIEW 2013 (32 bit) full development.
Target PC (with error message)
Windows 8 (64 bit) - LabVIEW 2013 RTE (Installed from an installer built on machine above using recommended settings)
Other Test Target (With no problems)
Windows 7 64 bit - LabVIEW 2013 RTE, MAX and VISA Installed.
Is there any way to debug this some more?? Where might I find this information in the windows event logs / perfmon etc??
Many Thanks in advance
Craig
10 years+ LabVIEW experience.
LabVIEW 2012

Hi craigc,
Good job with the current troubleshooting status!
A couple of things though:
• Have you tried building the application on the same Windows 8 machine? Does it have the same issue then?
• Did you try increasing the Virtual Memory usage? Even though this should not haveany influence if you are using a 64bit machine, it might still be worth a try. There's a tutorial how to do it on Windows 7 here and it should not be very different from Windows 8.
• You have mentioned that you used perfmon. What exactly did you measure and what results did you log?
• Do the pop-ups show up in complete random manner or is there a pattern?
• What about increasing the delay in TCP Send? I assume you have followed the latter suggestion from this forum post?
Thanks!
Mark N
Applications Engineer
National Instruments UK & Ireland

Error msg - not enough memory available for this task - chm file

Hi All
I am using RoboHelp for HTML 8.0 and creating chm file. I am using context sensitive help and the F1 key functionality. I have in the past created some map ID's with F1 and they have worked properly with our company software application. Now, I have a different database with our company and a larger help file and it is not working. I am told that the database should work. I also have lots of memory. I am working off of my hard drive which is where the .exe is for the company application and my chm file. I can open my .chm file. When I go into the application and press F1 where I created the map ID;s I get the message, not enough memory available for this task and also topic not available. Quit one or more programs to increase memory.
I have lots of memory and my file is only 598kb. I also only have RoboHelp and the application running. When I did a search, I found an article for a fix from 2004 from Adobe - Rb_46124 - not sure if this is the fix but the steps dont match since it is old.
Please help me.
Thanks
Caryn

Hi there
Actually, if you were to use FlashHelp output, you might find that the problems are compounded, as now you have the Flash Player and all its idiosyncrasies in the mix.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Not enough memory to run Microsoft Excel. Please close other applications and try again.

Hi All,
I have windows 7 SP1 64 bit machine with 8 GB of RAM. and have office 365 pro plus installed on it. I use windows explorer preview pane a lot and suddenly it has stopped working. Whenever I click on any excel, power-point, word file with the preview pane
enabled it gives me the error as below:
for Excel: Not enough memory to run Microsoft Excel. Please close other applications and try again.
For Power point: there is not enough memory or system resources to start power point.
However the file opens fine when I double click it. I have tried the following"
1. Repaired, re-installed office 365 pro plus.
2. Disabled, enabled and changed virtual memory page file size. It did not make any difference.
3. Have verified folder and search options and they are fine for the preview pane.
Is there anything we can do about it?

Since we were unable to reproduce in my test machine, we were unable to determine the root cause of the problem. This seems to be happening when Windows is trying instantiate the Office application for the preview in the Preview pane, if the repair
Office still doesn't work, we might turn our mind onto Windows OS level.
Here is my suggestion:
1. Disable all of security programs or Anti-virus on that machine.
2. Disable DEP.
3. If you installed any video or graphic codec programs, please temporary to remove them to check the result.
Feel free to post back.
====================
I've summary the Symptom as following:
When trying to open files from a file share using Microsoft Office 2013 via Windows Explorer, we're see the following messages in the respective Office apps (see below). However, after clicking OK in the respective dialog, the Office files open from
the share as expected.
Microsoft Word
Sorry, something went wrong and Word was unable to start. (24)
Microsoft Excel
Not enough memory to run Microsoft Excel. Please close other applications and try again.
Microsoft PowerPoint
There's not enough memory or system resources to start Microsoft PowerPoint.
The issue does not happen if we navigate to the same file via the File > Open dialog.
Tony Chen
TechNet Community Support

Building an Executable - Not Enough Memory to complete this operation

I am trying to build an executable from my project, it is quite a large program. During the build, within the 'initializing build' phase, I get the error message 'not enough memory to complete this operation'. I have a decent PC running XP and 4GB ram. LabVIEW is using about 1.2GB of ram when the problem occurs.
This is an application that I've been working on for some time and I have experienced similiar problems before. To get round it I have added the /3GB switch to the boot.ini file. However that is no longer working, it complains of a problem loading a dll which seems to have only started happening since moving to LV2012.
Does anybody have any experience with solving this problem please? It is a bit of a showstopper for me at the moment.
Thank you,
Martin

Hi Martin,
Adding the 3GB switch is a solution which should still work on your system.
I'm a little confused, is the system still complaining about not having enough memory? Or is it just the dll problem?
And is the error message occuring during the build, or when trying to run the .exe?
The dll in question is associated with DAQmx.
If it is a runtime problem rather than a build problem, it may be that you haven't included the DAQmx driver on the target machine, in which case the answer lies in this document: http://www.ni.com/white-paper/5406/en
If I've misunderstood, please clarify the exact issue which is currently occuring, and we can continue to troubleshoot.
Ian S
Applications Engineer CLD
National Instruments UK&Ireland

My TCP/IP connection return randomly a "Not enough memory to complete this operation"

I have a program running a data acquisition loop on a PC. (PIII 700, 128 Meg RAM). This program send all the data reads from the system to a UI in another PC via a TCP/IP connection.
Everything works fine.. but, sometime, I receive a message "not enough memory to complete this operation". This is ramdom and cannot always be reproduce. I run often days without this problem and he show up 2 or three times the next day.
The memory usage in the system is constant and the number of handles used is also constant. I am using LV run-time version 5.1.1. I cannot upgrade to 6.X for many reasons.
Can somebody has any idea of the cause of this message. I only see one message like thi
s in the previous post and it doesn't looks like been solved.
Thanks,
Stephane

Hi Dave,
I cannot give you any source for the error message. My homemade error manager give me an error 2 after this message box in my TCP/IP command server in... pointing to a vi where I call only TCP write, TCP read and a encryption decoding (a loop appllying logical operation on all the bytes of the message to generate a magic number.)
This error, has we discuss in a previous e-mail we exchange can be only a side effect. I don't know. I have not test my program on Win 9X. I don't have any license of the OS in the buiding. Even if than solve the problem, I can trust 9X OS. Probably the same for you if your application is critical.
I wonder if you can provide the kind of instrumentation you are interacting with. My list is the following:
VXI card HP 1413, (VISA layer and configuration DLL from HP)
VXI card HP 1415, (VISA layer and configuration DLL from HP) [disable]
GPIB/ENET100 (VISA) [diseable]
PCI Ballard ARINC card (Ballard DLL) [disable]
ENET connection with the TCP/IP layer... not the socket one.
I am running from a VXIpc-872 from NI in a NI VXI chassis. I have try to different VXI controller (with different CPU speed) and also with an HP chassis. Same result. [Diseable] mean the code is not called. I run with the minimal system I can support 1 VXI Card and 1 SCP and still the same problem happen.
Does you, Melissa G and Eric Dalaire (on the other thread) have the same type of hardware?
If my assumption is good, the AI Continious Scan is probably using DMA? Do they? I also use DMA in my VXI access. Do you use DMA too Dave?
Stephane

AEGP Plugin MediaIO Plugin:MediaIO2 error:0x4 not enough memory to complete this encoding (5027::12)

I am working on a video project in After Effects CS4 (with Trapcode Particular preset) that's 2:12 minutes long on a Windows 7 operating
system. I'm finished editing for the most part, but everytime I put the video in Render Queue it renders the video for a few seconds (sometimes minutes) and then stops with this message appearing: "After Effects logged one error: AEGP Plugin Media IO Plugin: MediaIO2 error: 0x4 not enough memory to complete this encoding (5027::12)". After I closed this message I checked the part of the video that did render was where I saved it to be as a normal file on my Desktop. I made this video with 2 compositions: 1 for the actual importing and editing and the 2nd for the rendering and thinning it out (this is because when I import the footage from my camera it's always very wide in after effects) There is nothing particularly abnormal about the video, not very heavy or anything and most of it isn't animated, just film. The size of the source material for the video is about 4.0 to 8.7MB.
Computer's Processor: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz
Computer's RAM: 2.00

First of all, CS4 does not work well with non-production codecs like MP4. Use the Adobe Media Encoder (or something similar) to convert your footage to a production codec (Cineform, DNxHD, Quicktime with the Photo JPEG codec or Quicktime with the PNG codec).
Second, you're running AE on a system with only 2 GB of RAM? Good heavens, man - no wonder it ran out of memory! Upgrade that to 4 if at all possible. (Upgrade to much more than that if you have a 64-bit OS and plan to upgrade AE ever. Although, on a machine as old and slow as that, you might be better off getting a new machine if you want to do anything serious in AE.)
Third, what's your exact version number of AE? You should be on 9.0.2 if I recall correctly.
Fourth, your video shouldn't be looking weird in AE. It's probably misinterpreting the pixel aspect ratio of your footage. Fix the interpretation and you shouldn't have to have a separate comp for changing its size.

24 GB of RAM but still "not enough memory to complete this operation"

Hello Everyone
I have an application running on Windows 7, 24 GB RAM, 64 bit computer. I am using Labview 2011, 32 bit and trying to acquire images from a camera. Although I have 24 GB of RAM but while acquiring, the physical memory usage goes upto 8 GB and after that I receive the "not enough memory to complete this operation" message. Any help on how it can be corrected.
Thanks
Chauhan

Hi,
We are developing an application with Labview 2011, 32 bit, to accuire images at 100fps. Aplication will run in another computer with more than 8GB of RAM (probably 32GB), without having Labview installed, it will only run the exe file. So our questions are:
we will found also the 8GB limitation?
If so, the solution could be to buil the application with LV 2011 64bit?
aditional information will be apreciated.
Regards,
Marc.

Error "not enough memory to complete this operation"

Hi, I develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer.zip)
from crio and then displays them on 7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please. Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
Attachments:
Project fo 2 PC.zip ‏108 KB
Project for crio.zip ‏114 KB
Error.JPG ‏14 KB

Hi Mike,
Mike23 wrote:
Hi, I develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer.zip)
from crio and then displays them on 7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please. Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
It's likely that instead of trying to plot 5 charts with 150000 data-points, you're trying to plot 150000charts with 5 data-points! Try right-clicking on the chart - do you see "Transpose Array" property? If it's checked, UNcheck it (if UNchecked, check it!)
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

"Not Enough Memory to Complete this Operation" Error using notifiers in LabVIEW

I get the (windows?) error message "Not Enough Memory to Complete this Operation" when using notifiers to send a flattened byte string as a response from one VI back to my calling VI. I do get my data and everything works out perfectly between the two VIs, but I do get this annoying error message that requires a user interface action. Why?

Well, I'm thinking you may have stumbled across a LV issue. I can get it to crash a lot faster than that when I clear your plot history in the top chart. It definitely seems as though LV has a huge memory leak on charts having their history cleared. With your 500,000 data point history, I lose about 170MB of memory every time I clear the chart history.
When I run your VI, the first time you plot data, I see a 170MB jump in memory, which I am assuming is the chart allocating its chart buffer. But, then I continue to see more memory being used as more data is collected (if you don't use your default 1 sample a sec rate, you can see this happen much faster - I am using 5k sample rate and 5k samples). Eventually, even without clearing the chart history, this will cause the system to crash.
I did a quick test and dumped the waveform and just used doubles and plotted that. Memory usage is drastically better, as I see no memory leak during standard acquisition (I still see the memory leak when the chart is cleared however).
You may have to rewrite to not use the waveform and signal for your chart and just use DBLs.

Not enough memory to complete this remote panel operation

I am developing my application in cFP 2000. I am using remote panel to view and operate the application. I am able to view the front panel from a host PC on the network for the first time through Internet Explorer (IE6). If I close the IE and then try to access the remote front panel, I get the error "Not enough memory to complete this remote panel operation" What could be the reason for this error. Please help me solve this problem. Thanks in advance.

I agree with Jonas suggestion re: RT Engine Info.
I beileve use need the following line in your LabVIEW.INI file to get that option.
targetmeminfo=true
I threw together a VI that tracks memory usange vs time VI that has preved quire helpful. I will attach this Vi along with a llb that I pulled down of this site somewhere. They have some supprt VI that are required.
What I suggest you do is fire this VI up and watch how your memory behaves. What you will see (hopefully) is memory useage that converges on some constant level. When you open FP via LV-RT or the web served FP's, there will be spikes in memory usage. When these remote FP are closed, the memory usage will drop-off.
If the memory usage keeps climbing, you have a problem!
NOW LE
T ME STOP and acknowledge that you may have some difficulty in trying to use the Get RT Engine info or using my utility if you really are out of memory. Let me suggest that you start by opening and running my utility first. If your code will not run and load with my utility running, don't give up! Try targeting the application and building the VI on the cFP 2000 and setting it to auto-boot. I have found that the compiled vesrions use a much smaller foot print than the development versions. Start your app by ressetting it and then target the cFP unit. You then load and start the utility I attached.
I have successfully deplyed app's that would only run as built app's on the cFP's. The cFP is very good at making you very aware of how you are using memory. THey are just a little tricky to work with. They make you appreciate the luxury of working with the cFP 2020's.
Post your code, and I'll take a look if you like.
Ben
Ben Rayner
Certified LabVIEW Developer
www.DSAutomation.com
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
GetMemoryStats.vi ‏66 KB
MemoryExample6_1.llb ‏85 KB

Im getting an not enough memory to complete this scanning operation error

I am using a WIA-HP CLJ CM1312 Scanner with Adobe Acrobat 9 Standard Version 9.4.6
This machine is Windows XP with 3gigs of RAM and plenty of HDD space....
When I try to make a color copy at a Resolution of 1200DPI I get an error saying that - "There is not enough memory to complete this scanning operation." It only works at 600DPI
I dont understand why I am getting this error. I would have thought my upgrade to 3gigs of RAM would have fixed this error.

1200 dpi can actually mean a lot of memory.
See if the steps under "error messages when scanning" releated to data transfer mode on this page help: http://kb2.adobe.com/cps/325/325262.html

ITunes - not enough memory to run this program [Solution]

Similar Messages

Maybe you are looking for