Itunes not launching, suggestions?

So heres the deal, got a new comp a few weeks ago and installed itunes on it. I'm running windows XP pro (same as on old one) and when I try to run itunes it wont launch. It says its running in my task manager though. I've tried reinstalling it, but same thing happens. Any suggestions? Thanks!

ok i think we might be onto something here with the first link, the dosent open after upgrade one. Everything went fine until step 7, the main SCinfo file exists, but the SC Info.sidb file that it shows being inside there is NOT there. Could this be a problem with the installation or something else?
Though i suppose if it wasent there at all it shouldent hurt as your supposed to delete it anyways....but if thats the case (I certainly didnt delete it already)and the fix is to delete a file that isnt there anyways, i'm not sure that will help.
Message was edited by: dfree40

Similar Messages

Itunes not launch

I am noticing that for the last 2 days iTunes on my Win 7 desktop does not open after it has been opened and closed once. I have to reboot my machine to get it to work. I uninstalled and reinstalled ituness but my issue persists. Has anyone else faced this issue?

Hello Stafz
Check out the article below to troubleshoot your issue with iTunes not launching properly on your computer. Try starting up in Safe Mode to see if it launches then.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
-Norm G.

Issues with Itunes not launching (Windows 7)

i have most current versions of itunes and quicktime (Ive read quicktime needs to be updated for itunes to work properly. ive deleted and re-downloaded both programs several times. Someone told me to check the Processes tab from the task manager and see what shows up when itunes is launched. It shows "itunes exe *32." So.... now what?

No don't remove Quick.ime, that has nothing to do with Apple.
So now QUicktime launches. Other software particularly some codec packs install unwanted Quicktime components that can mess up Quicktime.
Now Quicktime launches, and you check that it is the latest version. An out of date Quicktime can cause iTunes launch failure.
http://www.apple.com/quicktime/download/win.html
Could you also recheck the task manager, if iTunes.exe is still running try killing the proces or restart your PC.
If not, does iTunes still persist in the task manager when you try to start iTunes?
Double checking, do you get any kind of error message from iTunes if so, post it in full.
It might also be worth looking in the Event viewer to see if there is any error mentioning iTunes in the Application log.
If you find one double click on it and copy the result into your post. Using the copy button.

Edit function of Photoshop Elements 8 will not launch, suggestions?

When the "edit" buttion is selected it simply times out/resets itself and will not launch the application however, the organizer still seems to be functioning.

If PSE8 uses an Unwelcome Screen, bypass the Unwelcome Screen by creating Desktop shortcuts for the Organizer and the Editor, and restarting your computer.
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
The Unwelcome Screen leaves a zombie process running which prevents the actual program from launching again.
Ken

ITunes not launching anymore................

Hopefully someone can point me in the right direction and help me fix this problem.
A week ago iTunes 7.7.1 (the latest version just before V8), stopped working on my pc. When I say stopped working, I mean it won't launch. I can see the exe running in task manager - iTunes.exe, but the program itself is nowhere visible on the desktop.
I have tried the following to fix this.
1. Reinstalled iTunes (just before v8 came out), and did a repair. No change.
2. I have not attempted to remove it and then re-install as I don't want to lose all my configuration and playlist data. So my question is if I have to try a remove and fresh install, can someone please explain how I can backup my configuration via the windows explorer so that I can still have access to my playlilsts etc?
3. I downloaded iTunes V8 last night and installed and still no luck. The program will just not start. I can see the pc trying to get it going - the hard drive spins etc and I can see the exe in Task manager, however no program running.
Has anyone else run into something similar? Can anyone suggest what else to try to do to fix this?
I want to upgrade my iPhone firmware to 2.1 when that comes out and need to add a whole bunch of songs to my phone and now I can't do that anymore. This is very frustrating and annoying.

Without actually looking at your machine, it sounds like you have a registry problem. With both WinXP and Vista, the registry can become corrupted over time. I know you do not want to uninstall and re-install, but that is truly your only option. When I mean an uninstall, you have to get rid of any leftover registry entries for both iTunes and Quicktime as well as removing both programs.
You can do this from Control Panel-Programs and Features for Vista, and Control Panel-Add Remove Programs for Win XP. After your list of programs fully loads, select Quicktime first then click uninstall. Then do iTunes the same way. Next you need to ensure that all references for these programs are removed from the registry. I did this by running a registry scan using a program called CCleaner. It is an awesome freeware program that scans your registry and cleans it. You can get it from http://www.ccleaner.com
I had to do that in order to get iTunes V8 to run under Vista, I did not loose my playlists and configuration settings. I know this was not what you wanted to hear. I hope this helps

ITunes not launching because of newer version?

Since yesterday I have been unable to launch iTunes. I clicked on the icon on my desktop and it started to do what looked like an update. When it finished it left this message 'The file "iTunes Library itl" cannot be read because it was created by a newer version of iTunes'.
I would really like some feedback on this, because I've looked all over this forum and can't find anybody with the same problems. I have searched Apples problem solving pages and can't find the answer.

By way of experiment, try downloading and installing the latest version of iTunes:
http://www.apple.com/itunes/download/
Does that install go through okay? If not, let us know what error message you get. (Precise text, please.)
If the install does go through okay, try launching iTunes again. Does it launch without the error message this time?

ITunes Not launching at all

I upgraded to the latest version of iTunes a couple weeks ago and since then I haven't been able to launch iTunes at all. It looks like it's starting but nothing happens. I check my task manager and it's there and I can't end the process either without restarting my computer again.
I haven't been able to view my podcasts for a couple weeks now and I want to view and update soon.

Hey sspaz1000,
Try the tips in this article:
http://docs.info.apple.com/article.html?artnum=302386
If those tips did not resolve the launch issue this article should:
http://docs.info.apple.com/article.html?artnum=302856
Jason

Itunes not launching on mac after installing osx lion

Hi there, can any1 help me out with this problem, stayed up all night tryna figure out the problem but nothing, and it sends me this error message:
Process:         iTunes [690]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.5.3 (10.5.3)
Build Info:      iTunes-10530301~1
Code Type:       X86-64 (Native)
Parent Process: launchd [186]
Date/Time:       2012-02-03 04:15:49.956 +0000
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Interval Since Last Report:          4744 sec
Crashes Since Last Report:           10
Per-App Crashes Since Last Report:   8
Anonymous UUID:                      21117C7F-340F-4E8B-B434-BE991642F24B
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
       0x1012f5000 -        0x10237ffef com.apple.iTunes (10.5.3 - 10.5.3) <F2A947DF-4408-401C-43EF-340F966C91CC> /Applications/iTunes.app/Contents/MacOS/iTunes
    0x7fff60ef5000 -     0x7fff60f2a1ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBook5,1, BootROM MB51.007D.B03, 2 processors, Intel Core 2 Duo, 2 GHz, 2 GB, SMC 1.40f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313132533641465236432D47372020
Memory Module: BANK 0/DIMM1, 1 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313132533641465236432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 5.100.198.11 )
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHZ2160BH FFS G1, 160.04 GB
Serial ATA Device: HL-DT-ST DVDRW GS21N
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 3

Since switching to OS Lion same problem as you.
I made the following method:
- deselected the "Load External Subtitles" option in Perian's preference pane.
Don't work proced :
- Uninstall Flip for Mac.
- Restart the machine.
- Uninstall Perian.
- Restart the machine.
- uninstall the Divx codec.
- Restart the machine.
- Only install Perian and restart it should work with me finally it works now.
- same to Flip for Mac and restart.
- deselected the "Load External Subtitles" option in Perian's preference pane.
Phil

ITunes not launching, if re-install will I lose playlists???

I just downloaded the new version of iTunes off of Apple.com. Like most people I get the hourglass for a hot sec, then it disappears. QuickTime works fine. When I look in task mgr, I only see iTuneshelper. If I re-install iTunes will I lose all my songs and playlists that I have from the old version on iTunes? Please help. Thanks!

mrsthomas,
If I re-install iTunes will I lose all my songs and playlists that I have from the old version on iTunes?
Default settings place the iTunes folder (which contains the iTunes Music , Album Artwork and Previous iTunes Libraries folders along with the iTunes Library files ) at C:\Documents and Settings\ user name \My Documents\My Music\iTunes - far away from the iTunes program itself which is located at C:\Program Files\iTunes .
Although iTunes certainly makes use of the contents of the iTunes folder - among other things the library files tell iTunes where to find the song files which is, of course, necessary if iTunes is going to play any music or transfer it to your iPod - the folder is not actually a part of the program so uninstalling or upgrading iTunes should have no effect at all on the contents of the iTunes folder ...
... but ...
... one of the funny things about computers is that sometime, somehow, somewhere when you least expect it , they can do some not so funny things, like unexpectedly losing data when they're not supposed to. Which is why it's a good idea to have a back up copy in reserve of any data (such as your music files) that you value ... just in case.
There are a variety of ways of doing so but for most people it probably comes down to one of two options.
The one this article in the Apple Knowledge Base describes in detail uses iTunes 7 to burn a back-up copy of the contents of your iTunes Library and the Library files - but not the Album Artwork or Previous iTunes Libraries folders - to CD's/DVD's.
The other main method for creating your back-up is to save a copy of the iTunes folder on a separate hard drive. Some of our Discussions regulars are quite fond of that approach .
If, when and how you choose to back-up your music is your decision to make - just bear in mind that as far as I know we've never had anyone post in these discussions who's regretted creating a back-up copy of their iTunes Library.
But we often hear from people who regret not having done so.
P.S.
If you have other data besides your iTunes Library that you want to back up, have a look at this article on the PC World web site.

What is the deal with OS X Lion and iTunes not launching

I installed OS X Lion and loved the new features. The second day I wanted to launch iTunes and got an error. I had to remove OS X Lion and re-install Snow Leopard so I can get iTunes to run.

iTunes runs just fine on Lion.
Since you've reinstalled Snow Leopard we can't help you diagnose your issue.

I-tunes 10.2 will not Launch, but appears in Task Manager Processes

Hi all,
apologies for the repost here, but i have yet to find a solution and im new to the boards (i hope im not breaking etiquette!)
My problem is with Itunes not launching in windows 7 64 bit.
* I have uninstalled/reinstalled all itunes/quicktime components - no luck
* I have tried disableing the bonjour service - no luck
* When i try to launch the application it shows in task manager as a running 32bit process, but there is no GUI.
* I have tried a new user account, no luck
* I have gone through the apple support suggestions around launch issues
* I have run msconfig and closed off all processes bar itunes, still no luck.
* I have deleted the itunes config files.
* I have tried loading with another library.
* I have updated windows with all updates and SP1.
* i have tried to download an old version of itunes and install it, and even now it wont work!
At this stage i have tried every suggestion on every forum i can find, barring two that i found this morning which i will try in an hour or twos time (im in work haha), 1 - to simply repair the installations of itunes/Qt/Bonjour, i think thats a longshot, and 2 - to delete replace the icuuc40.dll file with a version from an older release of ITunes.
im beginning to think that i-tunes 10.2 just doesnt work on the windows 64bit OS! At this stage im thinking ill have to use songbird or winamp to transfer files to my apple devices, what a shocker.
I would greatly greatly appreciate any help or advice anyone can offer as im pretty stressed about it now!
Many thanks,
Dave
p.s. as ive ran a clean boot is it fair to say that its not a conflict issue?

Wow, Amzingly guys i think ive stumbled upon a solution. i used system config (msconfig) to reboot stooping all startups and all service (hiding microsoft serviced before disabling all)
upon reboot i ran itunes... nothing happened and i went into control panel, thinking id uninstall some bits n pieces... 5 minutes later i was prompted from itunes telling me that bonjour was inactive and asking if i wanted itunes to attempt a repair, i said yes. Sure enough a couple of minutes later itunes was up and running.. i had hope.
I used MSconfig to reinstate a normal startup.
And sure enough itunes seems to be working fine now.
This was an UBER frustrating time. I hope my post might help SOMEbody out there!
regards
dave
up the dubs

Why Does my itunes not install it says that it has not been modified

hg

Hello Stafz
Check out the article below to troubleshoot your issue with iTunes not launching properly on your computer. Try starting up in Safe Mode to see if it launches then.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
-Norm G.

HT1926 I downloaded the latest version of iTunes; however, it now will not launch, citing Windows error 127, any suggestions?

I downloaded the latest version of iTunes, now it will not launch. I get a Windows Error 127 message. Any suggestions?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

TS3212 I have now installed and uninstalled iTunes 10.7.0.21 about 5 times and still iTunes app will not launch. I have uninstalled my Norton AV and still nothing seems to work. Any suggestions would be appreciated.

I'm having problems installing iTunes on a Win 7 machine. The app will not launch correctly. It was working at one time, but now I have no idea why it would not work. I tried uninstalling some applications and still nothing. I did have to delete the Quicktime folders because it did not show up as being installed. Should I reinstall it since it doesnot look like iTunes reinstalled it?

Are you getting an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

ITunes 10.5.2 not launching on Windows 7

iTunes 10.5.2 will not launch on Windows 7 Professional. I have tried disabling Bonjour, and that did not help. Any suggestions?

I got it to work now ...
-Unistall the current iTunes on your computer.
- go to http://support.apple.com/kb/DL1427
-Go all the way down the page and download the iTunes through the given link
----------Download for iTunes 10.4.1 for Windows (64 - bit) here: iTunes 10.4.1 for Windows 64-bit.
-Once downloaded if a message window pops up with a message "the file itunes library.itl cannot be read"
Just go to My documents-> Music folder -> iTunes folder -> delete library.itl if existing or add it if it doesn't exist.
it worked for me so I believe that it should
Good luck

Itunes not launching, suggestions?

Similar Messages

Maybe you are looking for