ITunes not recognizing my files after move to new Powerbook

Just moved all my stuff over to my new computer (Powerbook G4) using migration assistant and while everything else seems to be working fine, iTunes is not recognizing the folder with all my songs in it, called "iTunes Music" in my iTunes folder in my Music directory. Any ideas why it's not being seen? I'd hate to import them, since I believe iTunes would be making copies of each song.
Thanks.

Thanks for your response. I'm on iTunes 4.7.1 on a new Powerbook G4 running OS 10.4. I was using a Powerbook G4 rental with OS 10.4.2 that I'm about to return. It's in the process of being zero'd out so I can't check the iTunes version but I think it was running iTunes 4.9, now that I think about it. I guess it was my mistake to think a brand new Powerbook would be running software more recent that a rental.
I didn't do any replacing of the music folder, since I used an automated "mover" program that ran when I first started this machine called "Migration Assistant" or something like that that did an amazing job of moving everything over from the rental to this new one. It was just like I was on the rental--my desktop, applications, dock, and everything else was set up the way it was before, with the exception, it seems, of iTunes.
iTunes started as if it were opening for the first time and looks that way. None of my songs show up, though they're in my user folder in Music > iTunes> iTunes Music, each album in a separate folder inside, including the albums I bought through iTunes. Still, no playlists or songs show within my iTunes application, nor does the "purchased music" category show up at all (typical, I guess, when it doesn't think you've yet purchased anything).
Also in my iTunes folder is:
- a file called iTunes 4 Music Library
- a file called iTunes Library
- a file called iTunes Library.xml
- a folder called Previous iTunes Libraries which contain an iTunes 3 Music Library and and iTunes 4 Music Library. Both of these are documents, not folders.
I'm hoping there's a way to trick iTunes into seeing this stuff, maybe moving everything out, upgrading and then moving them back in some way? Thanks for the help! Have a kids birthday party in a few hours and hoping to use my iTunes to make some playlists and maybe buy some more songs.
By the way, I have an iPod that I synched to the rental recently. Might be missing some playlists but all the music is on that, too.
Thanks!
Bob

Similar Messages

  • Itunes not recognizing my ipod after restoring it

    My ipod decided to go crazy on me, so I followed the 5 r's. After restoring the ipod it is no longer being recognized. I have restarted my computer, downloaded the latest software, used different usb ports but to no avail.
    There is no icon in devices that pops up. When i run a diagnostic is states that an ipod is connected.
    Any helps?

    Hi Jim,
    Thank you for your reply to my posting about iTunes not recognizing my iPod Touch after upgrading to Leopard.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Thanks for setting me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to your posting, I had already read the article you referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to your posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent you referenced was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

  • Itunes not recognizing my devices after installing 11.1.4

    As per itunes message to update to latest version, I updated to 11.1.4 on my PC. I'm running windows 8.1, 64 bit. After updating and restarting computer, itunes will not recognize any of my devices. iphone4s, ipod touch 5g, ipod touch 4g. The devices "are" recognized on the computer when plugged in via usb. I guess this would indicate that the usb cables and the drivers are good.
    All of my itunes libraries for the associated devices open up just fine. All of the contents are in tact. It's just that the device is not recognized in itunes when opened. Any suggestions would be much appeciated.

    Windows 8.1, 64bit
    It appears that the 64bit install messed up the device drivers for the Apple mobilie devices connecting as USB.
    I tried many things, I may have missed a step below.  But the following is what I believe was the fix - since it worked on a 2nd PC.
    Make sure you are using an administrator account.  Any of them on your machine will do for the following
    a) Get Windows to restart the drivers:
        - disconnect your USB device and close ITunes
        - connect your USB device
        - if ITunes loads, close it.
    b) File explorer:
    Open File explorer and browse to
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    In that folder there should be a set of files named "usbaapl64...."
    right click on the one ending in "INF"
    Select Install.  It's very quick.
    remove the USB device
    c) Restart the computer.
    When you login again, load ITunes before you attach your USB device.

  • Itunes not recognizing my iphone after the new update. Help!

    Ok, so after my old dinosaur computer finally finished updating and restoring my iphone4 with the new software, everything seems ok with the exception of about 20 ringtones that didn't get restored over. So I go to replug in my phone and I get an error message saying "This iphone cannot be used because the Apple Mobile Device service has not been started."
    WHAT???? I just updated the stupid phone for hours and now it does  this? So now it's not even being recognized in my itunes window. Anyone???

    Envision99 is nearly correct.
    First thing to try is to re-install iTunes (download it HERE and run the installer) - but, there's no need to uninstall it first. If that does not correct the problem, you may need to remove and reinstall AMDS, as described in this linked kbase article.

  • ITunes not recognizing previous library after System Recovery

    Hi - My computer was recently infected with some very nasty malware and the only sure way to clear it was to perform a complete wipe and restore to factory settings. I have always kept my iTunes music folder on an external drive so I assumed the files would be safe.
    Once the system was reset and secure, I downloaded iTunes. When I 1st clicked on it, iTunes searched my computer for music and found only the few files that come with Microsoft Media Player because I had not yet connected my external drive. Tonight I plugged in the drive with all my music and changed the location of my iTunes Music Folder to its previous location on the external drive under the Advanced tab in Preferences, but iTunes isn't recognizing my original library.
    I checked the Help in iTunes and tried connecting my iPod to see if that would trigger recognition of my library. Instead, it said my iPod was synched to another library and gave me the option of wiping it and synching with the (now empty) new library or only synching purchases from the iPod to the new library. Since my iPod is only synched with a fraction of my files, it seemed like this still would get me nowhere so I exited without doing anything.
    So, how can I get my original library back? All of the files are right there on the drive. I should note that I also have an iPhone 3G which hasn't been synched since my PC was 1st infected 4 weeks ago. Should I uninstall iTunes and dowload it again now that my external drive containing all the files is connected? Thanks in advance for your help with this. - Scott

    I haven't made any headway on my specific problem, but have seen many other posts on moving libraries from one PC to another or saving them to external drives before a reformat. I should add that the nature of the infection on PC was so severe that it was feared it would jump to (and then hide) in any external hard drive or flash drive so it could then re-infect any clean system. Because of this, I was unable to copy the original .itl file from my C drive before it was wiped. So, what I have now is the external drive which was the location of my iTunes Music folder as well as my iPhone Photo Cache and iPhone photos. I have a 40 gig iPod with all of my original playlists and a portion of my music (I only synched certain songs to manage space). I also have my iPhone 3G with a few of those same playlists as well as my applications. SO, the question is, can I rebuild my library from what I've got? If so, how? I've been searching for answers, but none seem to approximate my problem so any help is appreciated. Thanks - Scott

  • TS1538 itunes not recognizing my Iphone after an update?

    My Iphone Is Not Showing Up On Itunes For Windows So, I Can't Sync Music What Do I Do? (S/N)l I Just Updated Itunes & This Happened After The Update

    Had the same issue
    This http://support.apple.com/kb/TS1538  helped.
    Basically for some reason the USB driver was the default one.
    Read step 5
    5. Verify that the Apple Mobile Device USB Driver is installed

  • ITunes not recognizing my ATV after a Windows update

    Sorry to start a new thread here, but my ATV is all of a sudden not appearing in my iTunes devices list. The only thing that has happened from last night, when it was working and syncing just fine, and right now is that my computer restarted after an automatic Windows update overnight. The following updates were installed:
    - MS Office Compatibility Service Pack 2
    - Update for Windows Vista (KB968389)
    - 2007 MS Office Suite Service Pack 2
    - MS .NET Framework 3.5 Service Pack1 and .NET Framwork 3.5 Family Update
    and
    - Definition Update for Windows Defender - KB915597 (Definition 1.63.1684.0)
    I have made no changes to settings or anything, so perhaps something was changed in the course of one of these updates. I have already tried some of the basic things, including uninstalling and reinstalling iTunes and restarting the ATV, to no avail. iTunes and ATV both have been running in most current versions with no problems until now. I am hesitant to do a factory restore on the ATV, as I have done this once before and it resulted in my ATV being nothing more than an expensive brick...until my ATV magically appeared in iTunes when I purchased a new computer. Any help would be appreciated.

    Sorry to start a new thread here, but my ATV is all of a sudden not appearing in my iTunes devices list. The only thing that has happened from last night, when it was working and syncing just fine, and right now is that my computer restarted after an automatic Windows update overnight. The following updates were installed:
    - MS Office Compatibility Service Pack 2
    - Update for Windows Vista (KB968389)
    - 2007 MS Office Suite Service Pack 2
    - MS .NET Framework 3.5 Service Pack1 and .NET Framwork 3.5 Family Update
    and
    - Definition Update for Windows Defender - KB915597 (Definition 1.63.1684.0)
    I have made no changes to settings or anything, so perhaps something was changed in the course of one of these updates. I have already tried some of the basic things, including uninstalling and reinstalling iTunes and restarting the ATV, to no avail. iTunes and ATV both have been running in most current versions with no problems until now. I am hesitant to do a factory restore on the ATV, as I have done this once before and it resulted in my ATV being nothing more than an expensive brick...until my ATV magically appeared in iTunes when I purchased a new computer. Any help would be appreciated.

  • ITunes not recognizing my iPhone after I updated my OS to Leopard

    I have been successfully syncing my iPhone 3G for many months now. But this week I updated my OS to 10.5.6 and ran all the additional updates. Now when I plug in my iPhone, iTunes doesn't see it. I have iTunes 8 installed. I have shut down and restarted my machine and my iPhone several times.
    Thanks in advance for any ideas.

    Envision99 is nearly correct.
    First thing to try is to re-install iTunes (download it HERE and run the installer) - but, there's no need to uninstall it first. If that does not correct the problem, you may need to remove and reinstall AMDS, as described in this linked kbase article.

  • ITunes Not Recognizing Original Files from External Backup

    I restored my iTunes library from my old desktop computer, and it's on an external backup. I added the files/folders to my library (some 3,000 songs) but they will only play while the backup is plugged in.
    The error said iTunes couldn't locate the original file.
    Am I importing them incorrectly?
    In the meantime, I had to factory restore my new laptop. Apple restored my iTunes purchases, but before I restore my library again from the backup, I want to get it right. I don't want to have to plug in the external drive every time I want to play a song.
    Can anyone help?
    Thanks

    You have to select "Copy files to iTunes music folder" under Preferences -> Advanced -> General, or else iTunes will just link to your files. (This means you will have to re-import your songs, though)
    Hope this helps.

  • Safari and Mail not recognizing IP/network after picking up new WiFi?

    Very strange behavior that has happened numerous times - and I can't figure out what is going on.  The situation is that when I travel to school and connect to the wifi network there, I'm having issues with Mail (5.1) and Safari (5.1.2).  Network CP shows me an IP address and appears all is well - however Safari does nothing (no msg that I'm "not connected to the internet") and Mail just displays the triangle with exclamation point inside ...next to each mailbox.  Interestingly, I can open up Firefox and go on my way.  So why is Firefox able to 'see' the internet (Dropbox and other apps are fine too) yet Mail/Safari is having issues?
    Here's what I've done:
    Quitting/re-opening Safari:  Safari icon bounces in dock for a minute, literally, and never opens.  Now I go to try to open it again and it doesn't even try to open - no bounce, nothing (it's actually in "not responding" mode according to the force quit box).  So I force quit, re-open and it goes right back to that same behavior - not responding.  Have to restart to get it to act normally again.
    Mail won't even quit. I have to force quit - every time that this happens.
    Anyways, I can't tell if this is MB Air specific behavior, given its wifi troubles (which I have continuously whether at home or school) - or if this is purely an OS/software issue.....or a combination? 
    Anything else I can do to help troubleshoot, let me know.  Thanks in advance.

    Very strange behavior that has happened numerous times - and I can't figure out what is going on.  The situation is that when I travel to school and connect to the wifi network there, I'm having issues with Mail (5.1) and Safari (5.1.2).  Network CP shows me an IP address and appears all is well - however Safari does nothing (no msg that I'm "not connected to the internet") and Mail just displays the triangle with exclamation point inside ...next to each mailbox.  Interestingly, I can open up Firefox and go on my way.  So why is Firefox able to 'see' the internet (Dropbox and other apps are fine too) yet Mail/Safari is having issues?
    Here's what I've done:
    Quitting/re-opening Safari:  Safari icon bounces in dock for a minute, literally, and never opens.  Now I go to try to open it again and it doesn't even try to open - no bounce, nothing (it's actually in "not responding" mode according to the force quit box).  So I force quit, re-open and it goes right back to that same behavior - not responding.  Have to restart to get it to act normally again.
    Mail won't even quit. I have to force quit - every time that this happens.
    Anyways, I can't tell if this is MB Air specific behavior, given its wifi troubles (which I have continuously whether at home or school) - or if this is purely an OS/software issue.....or a combination? 
    Anything else I can do to help troubleshoot, let me know.  Thanks in advance.

  • Solution!!! (for iTunes not recognizing Nano)

    I've written this as a reply to the thread below as well - but as it seems more than just our friend below has this problem I've also posted this as a separate post
    Hi everybody,
    I have - like many of you, suffered through this frustrating process of Windows recognizing the Nano and yet iTunes not recognizing it, and after some research I think I may have found a solution (perhaps not THE solution).
    Just so you are aware, I just want to warn you that I'm not some computer science expert or anything, and this is a pretty old article (written May 2006, http://pluralsight.com/blogs/keith/archive/2006/05/26/25476.aspx), BUT I think this works on iTunes 7.0 because it is now detecting my nano. Basically I think what the problem is that the Nano is supposed to be formatted as FAT32 to work with iTunes but for many of us outdated Nano users the Nano is still formatted as FAT.
    So like the blog author has written, we need to go and run the Windows disk management tool (if you are not a computer person like I really am not, just go to Windows help and search "disk management" and it'll give you a link that brings you directly there). The disk management tool will probably show the C drive and then the iPod as well as any extraneous hardware. RIGHT CLICK on the iPod (it should be there since all of you are saying that XP recognizes it), format it to FAT32 (it will warn you that info on your ipod may be erased, but this doesn't matter since it's just info on your ipod and your music is on your C drive anyway). I didn't re-run the iPod updater like the blogger did (especially since the iPod updater is apparently included in iTunes 7.0 now and the latest one, which I believe is iPod updater 6-28-06..is now outdated and invalid)...but the next time I ran iTunes, it recognized the iPod!!!!!! HORRAY
    So in simple instruction form,
    - Open Windows disk management window (Control Panel --> Administrative Tools --> Computer Management)
    - Once you have this window open, click on Disk Management (under Storage)
    - If like you say, your XP recognizes your iPod (but iTunes doesn't), then your iPod should be listed under that window along with your C drive (and maybe others). Under File System, it might say FAT.
    - If it does, RIGHT CLICK your iPOD and choose Format
    - Change the Format from FAT to FAT32. (It will warn you that everything will be erased but that's ok)
    Btw I also restored the nano (to factory settings).
    I hope this helps...was glad to find there were other people suffering through the same thing. Misery loves company! Please let me know if it worked for you and if you have questions

    I too am a victim of upgrading to iTunes 7.0 I reformatted my nano per instructions, even though it already was FAT32. I reset the nano as well, still no joy. What's interesting is that if I restart the computer with the nano plugged in, it recognizes it and tells me that I need to update to 1.2. As soon as I do this, however, it says that it's updating, but the ipod goes from 'do not disconnect' to the normal menu. iTunes says it’s updating, but it never does. I need to kill the process through task manager to get it to quit.
    Additionally, if I choose not to update, the nano shows up in iTunes just fine and I can move songs to the nano. (I have it set to manually update the nano as I have more songs in my library than the nano can hold.)
    However, as soon as I ‘eject’ the nano, reconnecting it does not show the nano, whether I stay in iTunes or close iTunes and then unplug and plug in the nano. The nano shows ‘do not disconnect’, and windows sees the nano, but still no joy in iTunes.
    FYI, I have also uninstalled and reinstalled the software and tried all the directions at:
    http://docs.info.apple.com/article.html?artnum=93716
    Which I was directed to when doing the diagnostics on the iPod through iTunes.
    This is a total crock. Some upgrade.

  • ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

    After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
    Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
    My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
    Any ideas on how to get the iPod recognized again in iTunes under Leopard?

    Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

  • ITunes not recognizing original IPod touch after new one installed

    I tried to set up new IPod touch but itunes wouldn't recognize it. Downloaded latest version of itunes. Was able to set up new IPod touch but now old touch not being recognized by itunes. Went through the troubleshooting guide with no positive results. Old (unreconized) touch is fully charged. Restarted computer. Restarted itunes. Changes usb ports. Nothing working. Any ideas?

    Hi Jim,
    Thank you for your reply to my posting about iTunes not recognizing my iPod Touch after upgrading to Leopard.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Thanks for setting me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to your posting, I had already read the article you referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to your posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent you referenced was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

  • Lightroom 4.4 not recognizing RAW files from supported cameras

    I started to get problems with Lightroom not recognizing RAW files from my Fuji XE-1 and Canon 5D Mark 3 cameras but I thought it was a problem with RC. After downloading some files today in 4.4 without a problem I encountered the same error message (unable to inport listed RAW files) again. The files open fine in Bridge. Any idea what is causing this problem?

    Hi Geoff
    I use a Mac with the latest version of Mountain Lion OS. The image files are being imported from the cards; in the case of the Fuji an SD card inserted in the card reader slot on the Mac and in the case of the Canon a CF flash card in a card reader attached to the Mac.
    Appreciate any help you can provide.

  • ITUNES NOT RECOGNIZING IPHONE 4S DEVICE, NOT ABLE TO SYNC

    Hi Everyone, just noticed an anomaly with my devices
    ITUNES NOT RECOGNIZING IPHONE 4S DEVICE, AND NOT ABLE TO SYNC. ANY IDEAS WOULD BE HELPFUL, THANKS

    Open Device Manager and Right click Apple Mobile Device and choose Update Driver
    Select BROWSE My Computer For Driver Software
    Select Let me pick from a list of Device Drivers on my Computer
    Click Have Disk button---NOTE if the have disk option is not available. Choose a device category
    such as mobile phone or storage device if listed then Click Next the have disk button should appear.
    Click the Browse button and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    Double click the "usbaapl" file or "usbaapl64" or if there is no driver folder look in
    C:\program Files (X86)\ Common Files\Apple\Mobile Device Support\Drivers. instead
    Click open in Have Disk Window  Then Click NEXT and then FINISH Windows will install the Drivers
    GOT THIS FIX FROM AN EARLIER POST BY J F FOURIE and it worked for me
    Hope this helps

Maybe you are looking for

  • Installation problem of Oracle 8.1.7 on solaris 10 x86

    Hi, I tried to install the Oracle 8.1.7 on solaris 10 x86 and I got an error message shows: "cannot write to /opt/oracle/product/8.1.7/jar/classes2.jar".checking the log it shows: Exception: IOException2 and exception: copyGroupFromJar. I ignored the

  • Creation of an order with hundreds items

    Hi everybody, we need to create orders containing more than 400 items and we have all the items details into an excel file. We can copy and past (for example the material code) only few items (about 17). Is there a smart way to copy and paste all the

  • Macbook start up problem

    Hi, yesterday I was serving the net using Safari and everything works fine,after that I put my Macbook to sleep as usual (I usually don't shut down) few hours later I when I try to wake it up and the screen just went black, no screen light, totally b

  • 10.9.x no backlit keyboard with FileVault 2 enabled

    I adopted 10.9.x (Mavericks) from 10.6.x (Snow Leopard) several MacBook Pro's 13" and 15" a like, with or without retina displays dating from 2010 to 2014. In 10.6.x even with FileVault enabled when you first boot the computer the backlit keyboard wo

  • Standby Button problem

    My hold button of my iPhone 5 does not work well. What can I do? I have 1 year Applecare. Will it be repaired by Apple? And how long do the reparations take if I send it to apple.