Itunes not recognizing my iphone 4s??? HELP! pc recognizes it as a camera??

My itunes does not recognize my iphone 4s when i plug it in. I have tried many things please help. when i plug it in it is recognized as a camera.

When you plug it it, it should recognize it as an Apple IPHONE under devices. It will then bring the Camera/Connection wizard for the photos on the device. When you plug into different USB, it should bring the hardware wizard and tell you what its installing, what happens?
Under Device Manager, under Imaging Devices it will show up as Apple IPHONE. Is this being shown in your computer?

Similar Messages

  • TS1538 Itunes not recognizing my Iphones. I've tried updating the itunes, cable is fine, and even re-installing itunes. Plz help :(

    Itunes not recognizing my iphones. I've tried updating the itunes, cable is fine for the iphone, and re-installed itunes. Plz help

    Version of iTunes was just released today. If you update to that, does that help with the recognition troubles?

  • HT201269 itunes not recognizing my iphone 4. i have a new laptop windows 8 and installed 64 bit itunes. but device is not recognzizable.

    i have currenlt bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
    because i have no backup on my previous laptop, i downloaded touchcopy by even touch copy is not recognizing my iphone. please help.

    Media is not included in device backups.
    See Recover your iTunes library from your iPod or iOS device.

  • ITunes not recognizing my iphone 4 and is stuck on connect to itunes screen.. Even apple store cannot fix it.. any help?

    I tried Erasing all contents and settings.
    And after that it asked to connect to itunes for restoring. BUt iTunes never recognized the iphone and i am stuck on this screen

    Ignore sandeep.  Don't use DFU mode.  You need to use recovery mode.
    Placing your device into recovery mode
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
    Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
    If necessary, open iTunes. You should see the following "recovery mode" alert:
    Use iTunes to restore the device.

  • Itunes not recognizing my iphone 4

    Itunes is not recognizing my Iphone 4 (verizon)
    I have completed all suggested steps from Apple, Any help?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows

  • Mac is not recognizing my iPhone- need help!!!

    Mac is not recognizing my iphone at all. I have done every suggestion I have found except for uninstalling then reinstalling maveric os x.  here is my reposrt from ENTRESOFT: entrecheck if that helps.. someone please help!!!!
    Hardware Information:
              iMac (21.5-inch, Late 2012)
              iMac - model: iMac13,1
              1 2.7 GHz Intel Core i5 CPU: 4 cores
              8 GB RAM
    Video Information:
              NVIDIA GeForce GT 640M - VRAM: 512 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 2:20:33
    Disk Information:
              APPLE HDD ST1000LM024 disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 999.35 GB (262.86 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              (12.6.1f9 - SDK 10.6)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [not loaded]
              [loaded] fi.polar.libpolar.plist
              [loaded] fi.polar.polard.plist
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist
    User Launch Agents:
              [loaded] com.adobe.AAM.Updater-1.0.plist
    User Login Items:
              Google Drive
    3rd Party Preference Panes:
              Flash Player
    Internet Plug-ins::
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
              QuickTime Plugin: Version: 7.7.3
              Flash Player: Version: 11.9.900.170 - SDK 10.6
              Default Browser: Version: 537 - SDK 10.9
              Unity Web Player: Version: UnityPlayer version 4.1.2f1
              NortonInternetSecurityBF: Version: 1.7.0 - SDK 10.6
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
    Bad Fonts:
    Old applications:
              Pages:          Version: 4.3 - SDK 10.5
                        /Applications/iWork '09/
              iSkysoft Helper Compact:          Version: - SDK 10.5
                        /Users/Elin/Library/Application Support/Helper/iSkysoft Helper
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   2%          DashboardClient
                   1%          WindowServer
                   1%          EtreCheck
                   0%          SymDaemon
                   0%          dpd
    Top Processes by Memory:
              426 MB          iPhoto
              262 MB          SymDaemon
              246 MB          mds_stores
              180 MB
              172 MB          Finder
    Virtual Memory Statistics:
              2.56 GB          Free RAM
              3.26 GB          Active RAM
              1.24 GB          Inactive RAM
              955 MB          Wired RAM
              917 MB          Page-ins
              0 B          Page-outs

    When you have uninstalled it, repair permissions and restart your Mac.
    You don't need anti-virus on a Mac:
    There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac will NOT be infected by a virus, it may have other security-related problem, but more likely a technical problem unrelated to any malware threat.
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
    More useful information can also be found here:

  • Ox upgrade / itunes not recognizing ipod/iphone

    Just updated to ox 10.6.7 and neither my 4th gen ipod or 3g iphone are being picked by itunes.  Can someone give me some pointers to resolve this?  They are charging but not recognized by itunes.  Thanks.

    see Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart.
    also here: iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X .

  • Why is my itunes not recognizing my iphone 4S?

    When I plug in my iphone 4S to my Mac computer, iphoto is the only application that opens.  Why does itunes not open when I plug in my iphone?  Why does itunes not even recognize my iphone?

    The problem is that your MacOS and iTunes versions do not support the iPhone 4. The minimum requirements are written on the box.
    Please check out this thread....
    So first, just get the upgrade to at least 10.5.8.
    I'd suggest that you go to 10.6 (Snow Leopard) in the Apple Store but be sure to check that you have the minimum hardware requirements on your Mac.
    Then get the latest version of iTunes.

  • HT1369 itunes not recognizing my iphone

    I have a Windows 8.1  pc and have dowloaded latest version of itunes but itisn't recognizing any of my families devices. Not sure how to resolve.

    Hello mgarzaj
    Check out the article below to troubleshoot your issue with your devices showing up in iTunes. It will walk you through checking the USB cable and check to ensure that the Apple Mobile Device Support is installed properly.
    iOS: Device not recognized in iTunes for Windows
    -Norm G.

  • ITunes not recognizing my iPhone

    I downloaded the newest version of iTunes, and now iTunes doesn't recognize my iPhone. Help!

    See (windows) or (mac).

  • Itunes not recognizing my Iphone (There's no driver)

    Suddenly my Iphone stopped working with Itunes. There had been some issues (like Itunes not letting me add or delete songs from the Iphone) but now the "Can't use this iPhone because the necessary software is not installed" message. I followed these instructions but there's no "Driver" folder, reinstalled iTunes, deleted 3rd party software, but the problem is there still. Should it be that 11.1.5 update is having an issue?

    Workaround: Downgrading to 11.1.0 and the drivers are there.
    This is annoying, maybe Apple forgot to pack the drivers in the newest package.

  • Itunes not recognizing my iphone after the new update. Help!

    Ok, so after my old dinosaur computer finally finished updating and restoring my iphone4 with the new software, everything seems ok with the exception of about 20 ringtones that didn't get restored over. So I go to replug in my phone and I get an error message saying "This iphone cannot be used because the Apple Mobile Device service has not been started."
    WHAT???? I just updated the stupid phone for hours and now it does  this? So now it's not even being recognized in my itunes window. Anyone???

    Envision99 is nearly correct.
    First thing to try is to re-install iTunes (download it HERE and run the installer) - but, there's no need to uninstall it first. If that does not correct the problem, you may need to remove and reinstall AMDS, as described in this linked kbase article.

  • Latest version of iTunes not recognizing my iPhone 4sprevious

    I downloaded the latest version of iTunes on my laptop today and since then my iPhone 4s has not been recognized, but it was showing up just before I downloaded the new iTunes. What can I do to fix this? Or is there a way to download they previous iTunes?

    Yes.  I just solved the problem on my PC.  Here goes...
    Issue:  My Windows7 computer was producing the pop up box with the error text as you described.
    The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
    1.  You need to use the Windows File search feature to look for the name "SQLite".  This will quickly locate the offending DLL in the other application.
    2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
    3.  Uninstall Mobile Me.
    4.  Restart your PC.
    5.  Reinstall Mobile Me.
    6.  Mobile Me should sync at this point, but if not, restart the PC once again.
    In my case, the offending program was my Aptana Studio development application.  I had recently the SQLite3 database to my Ruby On Rails configuration...
    This is where the file was located:
    C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
    I hope this helps,

  • ITune not recognizing y iphone

    hi guys, i was was trying to sync my iphone with itunes but it is always displaying an error message saying "iTunes was not able to connect to Sync Services, please reconnect later" or something like that... is there something wrong with my phone or does it have something to do with iTunes' connection to the internet or something? please guys, i badly need your help... huhuhu...

    i hope it will work.. thanks!

  • TS1538 itunes not recognizing my Iphone after an update?

    My Iphone Is Not Showing Up On Itunes For Windows So, I Can't Sync Music What Do I Do? (S/N)l I Just Updated Itunes & This Happened After The Update

    Had the same issue
    This  helped.
    Basically for some reason the USB driver was the default one.
    Read step 5
    5. Verify that the Apple Mobile Device USB Driver is installed

Maybe you are looking for

  • How can I get a refund on an app that doesn't work

    I bought an application today and the application works on the orignal ipad on the old IoS 4 software but not the new IoS 5 software on my ipad 2. I have tried to remove the app and re-download the app incase it was corrupted, but still had the same

  • Is it possible to configure Mail in a 'push' configuration?

    'push' as I understand it, means the client is always in connection with the mail server- so when new mail comes in, it doesn't sit on the server until the client's schedule tell it to check for new mail (this applies to both POP and IMAP). Does anyo

  • How to get the column index of the selected column

    Hi All, I have a dynamically populated advanceddatagrid. Iam trying to edit any column of a particular row. In my as file im able to get the row index using selecteditem property. But I need to get the column Index and the updated value of the column

  • I have and iPhone4 4.2.1but I can't update to 6.0

    I have an iPhone4(4.2.1) but I can't update to 6.0.  My iTunes software is up to date.  It states that theres a new version update.  But when I press update it says the the iTunes software it current and then stops?  How can I update my phone?

  • Email Status is Still no Entry in Queue

    Hi , I have to send an smartform output as attachement in a service transaction. for that an action is configured. it is working fine. There is one more requrement is to send a word doucment also send as an attachment,  we have written the code to se