ITunes not recognizing/syncing replaced iPhone. Please help ASAP

i just got my cracked screen on my old phone replaced with a new iphone and ever since then when i plug my phone into my computer iTunes is not popping up and automatically sycning like usual. any ideas/advice on what i should do? thanks alot
ben
Message was edited by: bg23

What have you tried so far?
Different USB port?
Different iPod cable (if possible)
Reboot the computer and open iTunes before plugging in the iPhone?

Similar Messages

  • I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help

    I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help.
    It works fine through my macbook, can't find anything in settings on iphone to resolve problem

    The headset has to have A2DP capability, which most (I believe) do not.
    http://en.wikipedia.org/wiki/Bluetooth_profile

  • TS3694 iTunes not recognizing newly restored iPhone! Any help?

    Hi there, My iPod is notonnecting to itunes when I plug it in. > I had just restored it and now when I plug it into computer the "connected" comes up on the iPod screen but it doesn't show up on itunes or desktop as though its not plugged in! Any help?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • Iphone 4s is not recognized by my computer, please help

    I have a problem with my Iphone 4s, when i connect it, i press Pc Connecting in my Iphone then my computer cannot detect it even itunes, in device manager it show me Usb device with a yellow exclamation on it, i'm using windows xp please help.

    http://support.apple.com/kb/ts1591

  • ITunes not recognizing iPad or iPhone via wireless

    I've been noticing that since the last iTunes update iTunes won't recognize my iPad or iPhone via my wireless connection when I launch iTunes. I have to manually plug each one in to sync, and this has been getting progressively worse over the last few weeks.
    At first it was only sometimes, then it was just the iPhone, then it was just the iPad, then it would alternate between the two, and now it won't recognize either.
    Do I have something off in my settings, or is this a bug in the new iTunes system?
    Anyone else experiencing the same thing?

    Hey jzzlvr57,
    Thanks for the question. After reviewing your post, it sounds like the device isn't showing up in iTunes. I would recommend that you read one of these articles, they may be able to help you resolve or isolate the issue.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device not recognized in iTunes for OS X
    http://support.apple.com/kb/TS1591?viewlocale=en_US
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Can't update/install itunes- 'not a valid win32 application' PLEASE HELP

    Hi Guys,
    I'm having some serious problems with installing iTunes on my laptop. I have searched and searched the internet and can not find any solution to my problem. I am receiving the error "itunes is not a valid win32 application' after the program finishes downloading. Sometimes however it will just stop in the middle of the download. I use a SONY VAIO VGN-NW25GF which was only purchased last year. It uses windows 7. I had trouble downloading itunes to begin with though eventually it worked, however since the new 10.1 update has been available ive been attempting to update it almost every time i use itunes. Each and every time it fails and i've had enough as i need to update my iphone software. I’ve since uninstalled both itunes and quicktime hoping it will reinstall properly. But nothing, the same problem is occurring and now i have no itunes program!
    I've tried all the solutions online about deleting browing history/temp folder and any itunessetup.exe/quicktimesetup.exe files and nothing works. I've also tried downloading using a different browser and still nothing. I’ve done a virus scan, disk cleanup and disk defragment and NOTHIGN is working. I'm starting to get quite frustrated as i need this program for my iphone. Any help would be greatly appreciated!! Thanks 

    I have the same problem!!!!PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    -I'm having some serious problems with installing iTunes on my laptop. I have searched and searched the internet and can not find any solution to my problem. I am receiving the error "itunes is not a valid win32 application' after the program finishes downloading. Sometimes however it will just stop in the middle of the download. I use a SONY VAIO VGN-NW25GF which was only purchased last year. It uses windows 7. I had trouble downloading itunes to begin with though eventually it worked, however since the new 10.1 update has been available ive been attempting to update it almost every time i use itunes. Each and every time it fails and i've had enough as i need to update my iphone software. I’ve since uninstalled both itunes and quicktime hoping it will reinstall properly. But nothing, the same problem is occurring and now i have no itunes program!
    I've tried all the solutions online about deleting browing history/temp folder and any itunessetup.exe/quicktimesetup.exe files and nothing works. I've also tried downloading using a different browser and still nothing. I’ve done a virus scan, disk cleanup and disk defragment and NOTHIGN is working. I'm starting to get quite frustrated as i need this program for my iphone. Any help would be greatly appreciated!! Thanks 

  • Toshiba External Hard Drive not recognized by computer. Please help!

    I was wondering if anyone could help me. I have an external hard drive and it will not show up in "My computer" when I plug it in. I have tried other USB drives and other computers. I am starting to think it is a hardware issue but I don't want to lose hope. The blue light is coming on when you plug it in but it doesn't blink and there is no noise whatsoever. Is there anything I can do to fix this issue so that I can recover the information on it? Thanks in advance for any help. It is greatly appreciated.
    Additional information: I'm not sure how old this thing is but the model number is HDDR160E03X.

    Same problem: I can't see my Toshiba PH3100U-EXB (Gen 2) external hard drive when I plug it in. After awhile I get this error message (see attachment): USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. FOr assistance in solving this problem, click this message."
    When I click it, I get a list of USB ports and devices, with Unknown Device in bold face. No real information there.
    Yes, I ran Disk Management and the Toshiba did not show up when I plugged it in and hit Refresh.
    Does it make a difference that the last time I used the external hard drive, we were in Windows XP and now we're in Windows 7?
    Please help! It's not just the backing up I'm worried about...it's being able to retrieve files later!
    Thanks!
    Attachments:
    USB-NotRecognized.jpg ‏28 KB

  • Since updating iTunes, not recognizing/syncing my iPhone5.

    Followed first set of steps to correct this problem, but nothing. Now asking for me to delete iTunes and start again. Should I do this? Worried I will lose my music not purchased but added. Help!!!

    Hello betsykatec,
    Welcome to Apple Support Communities.
    You can use the following article to walk you through troubleshooting your issue.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Regards,
    Jeff D.

  • I do not know much about iPhone, Please Help.

    I do not know much about iPhone, however I am using Nokiafrom last 4 years (N72, E71).
    My plan was to purchase a new phone.
    Now, if I see Nokia, it is provide me free mail facility(pushup mails using Nokia Emailing) !!FREE, it provides me exchange mail services(Nokia Messaging and Emoze) !!FREE. And most interesting thing OVI MAPS. FreeNavigation online and offline (with Network and without Network it works).
    Facility to save 3D maps inside mobile (Many countries) and navigation in different language. It really helps me till 95% when I used to go other unknown cities.
    Please confirm if iPhone have these types of facilities. BecauseI am much interested to purchase this phone (16/32 GB)

    www.apple.com/iphone.
    All the features and specifications can be found on Apple's website.  You can read for yourself.

  • My iphone 4 show me a pop up every 10 seconds ( this accessory is not optimised for this iphone) please help me

    my i phone show me a pop up every 10 seconds ( this accessory is not optimized for this iphone) how can i fix this prob,; please i need for help

    The "not optimised" message is often caused by dirt or debris in the sync port at the bottom of the phone. Have a close look in there and clean out (very carefully) if necessary.

  • Boot Camp: Seagate External Drive not Recognized in Windows Explorer -- PLEASE HELP!

    I'm running in Boot Camp and using a Seagate Free Agent GoFlex external drive as both a Time Machine backup on the Mac OS, as well as a storage unit to exchange files. However, whenever I plug my external drive into my computer while running Windows, it does not show up in the Computer tab under "Devices With Removable Storage", like it should. It does show up on the "Safely Remove Hardware and Eject Media" button in the bottom right hand corner, and it appears as a "Startup Disk" in the Boot Camp Control Panel, so I know that it isn't a cable or USB input issue. Please help me get it to appear as a Device in the Windows Explorer. I need to exchange files from my Mac OS to my Windows OS. Thank you in advance for the help.

    I did it but i could not install tool from the dvd. As i said, i can still boot up windows xp i just needs to re-install the service tool.
    The drivers are working properly.

  • My Itunes wont burn cds --error 4208 PLEASE HELP ASAP

    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    NVIDIA AWRDACPI
    iTunes 7.2.0.34
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    NVIDIA GeForce FX 5500 (Microsoft Corporation)
    Connected Device Information:
    DiskDrive, Maxtor 6L200S0, Bus Type ATA, Bus Address [0,0]
    DiskDrive, Apple iPod USB Device, Bus Type USB
    CDROM, TSSTcorp CD-ROM SH-C522C, Bus Type ATA, Bus Address [1,0]
    CDROM, _NEC DVD_RW ND-3550A, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    E: _NEC DVD_RW ND-3550A, Rev 1.05
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 16 24 32 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    F: TSSTcorp CD-ROM SH-C522C, Rev TS01
    Drive is empty.
    The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: _NEC DVD_RW ND-3550A on CDR media at speed 8X.

    I'm also having this problem. Please help!! Thanks Heath
    Here are my diagnotics:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dell DE051
    iTunes 7.2.0.34
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Intel(R) 82865G Graphics Controller
    Connected Device Information:
    DiskDrive, WDC WD1600JB-75GVC0, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVD+-RW GWA4164B, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    E: HL-DT-ST DVD+-RW GWA4164B, Rev E113
    Audio CD in drive.
    Found 10 songs on CD, playing time 61:14 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 07:36:17
    Track 3, start time 15:01:17
    Track 4, start time 19:26:62
    Track 5, start time 24:56:42
    Track 6, start time 30:35:47
    Track 7, start time 36:48:22
    Track 8, start time 43:19:60
    Track 9, start time 49:01:22
    Track 10, start time 56:07:02
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive E: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 24X.

  • Why does my Alesis ioj2 express only come out through one side? When I sing into the microphone, it only comes out one side. I've set everything to stereo and it still has not solved the problem. Please help ASAP.

    Please help with my problem. I need to start recording!!

    Chris Huber wrote:
    Why does my Alesis ioj2 express only come out through one side?
    http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Itunes not completing sync with Iphone 4! Help!!!

    Have an HP laptop running Windows 7. Using Itunes to sync Iphone 4.
    Last week I connected the Iphone 4 to computer and Itunes updated my phone to IOS 4.3.5.
    After the update to the Iphone 4, Itunes started syncing with my phone. Now, it gets to step 5 and says 'optimizing 44 of 46' then I get the message 'Itunes has stopped working'. I have uninstalled Itunes and Quicktime and am still getting the same problem.
    Can anyone help?
    Thank you!

    OK, Doughboy, i didn't get much help on here, but I may have found a solution!
    IF you are having the same situation I've been having, then this should work, it did for me.
    I had my Iphone 4 updated current and Itunes was the latest version. BUT when I plugged in my Iphone to sync it with Itunes, it got all the way to step 5 of 5 and, during 'Optimizing', Itunes stopped working.
    Here's what I did: The first thing is to copy your current pictures to a new folder on your computer. If they are in Libraries>Pictures>MyPictures, create a new folder (I named it Pictures 2, so it was now located in Libraries>Pictures>Pictures 2). Then copy the pics to the new folder.
    I then plugged in Iphone 4 to my computer. Itunes starts up automatically. When my Iphone shows up on the left side of Itunes, i clicked on it and then clicked on the photos tab in the upper right area. Uncheck the 'Sync photos from' box, then check the 'Sync photos from' box again and then clicked on the drop down box to the right of 'Sync Photos from' and clicked on 'choose folder'. I then selected the new pictures folder (in my case 'pictures 2'). Then you click 'apply' in the bottom right corner, then 'sync'. It worked perfectly for me!!! Good luck!!!

  • IPhone will not complete sync...please help!

    I'm trying to help a client with his iPhone woes, every time I sync with his computer, I get the follwing error (or one similar to it):
    AppleMobileSync.exe|1984:17849760|/SourceCache/DeviceLinkX/DeviceLinkX-91.2/Wire Protocol/DeviceLinkConnection.c:_DLMainThreadMessagePortCallback| ERROR: Error creating components from read data: 'Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header if XML.'
    This error comes up either when I'm syncing his photos or his contacts.
    I've cleared the sync history a number of times, but this issue always comes back to bite me. This is on a Sony Vaio running Windows XP SP2 with Microsoft Outlook 2003. Any help is apprecitated!

    Android23,
    I would uninstall and reinstall all components listed in the following article:
    http://support.apple.com/kb/HT1925
    Hope this helps,
    Jennifer B.

Maybe you are looking for

  • How can i convert my iTunes to MP3 ?

    Hi, i am sure this question must have been asked before, i have just downloaded a couple of Albums from the iTunes Store, to move these Album tracks away from my lap top, i have to put the tracks in a playlist, i am ok with that. Then when i put the

  • Issues with MS-8348 CD-RW

    I've just installed the MS-8348 CD-RW, and the bundled Nero Burning ROM, and am experiencing problems. The problem occurs when I try to write more than approx 400 mb on a cd-r. Whether I make a audio cd or data cd of anything more than appx 400mb, I

  • Migrate from Tiger 10.4.11 to Snow Leopard 10.6.4 that is not a new machine

    I have two users. one with a mac pro running tiger 10.4.11 and one using snow leopard 10.6.4 one user was fired the remaining user wants the better mac running snow leopard i created a new user account on snow leopard mac but now when he tries to run

  • What event is fired when

    Hi Everyone, I have a page that is displayed using CompleteAuditController *screen = [[CompleteAuditController alloc] initWithNibName:@"CompleteAuditWindow" bundle:nil]; screen.modalTransitionStyle = UIModalTransitionStyleCrossDissolve; [self present

  • Prior Cloned Drive(s) won't recognize on New Macbook Pro

    Just bought a new (mid-2012) 13" MBP 2.9GHz i7; tried to either: swap it's drive with my prior (late-2011) MacBook Pro 13" (which I've swapped without issue before); it yet it only shows a circle with a diagonal line through it (meaning it doesn't se