Itunes not seeing anything on local network

Dear all, I will start by outlining how the problem occured.
Last night I had my laptop connected to my router via ethernet (and unknown to me via wifi too as the laptop automatically turns on the wifi card sometimes when it gets power). I was using my ipod touch to control itunes when I noticed thw wifi card was on. I turned off the wifi card switch and now my itunes cannot see anything on the local network (including my ipod touch remote and other peoples itunes shares). This problem occurs when the laptop is connected to the router by wifi or ethernet cable, and I am sure that the ipod touch is connected to the same network as the laptop. Any ideas?
Many Thanks

Got the problem solved.
-Restarted the Bonjour service
-Restarted windows

Similar Messages

  • My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

    Hello Friends,
    I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
    1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
    2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
    (I'm using windows 7)
    Friends, Please help me with the above problems. It will be a great help.
    Thank You.
    R.SAMALA

    Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • I cant not see anything when i logged in on my sportsbets on bet365 and few more sites

    Hallo!i cant not see anything when i logged in on my sportsbets on bet365 and few more sites

    Mandilee01 wrote:
    I took over my bosses computer.  When I sign into my iTunes account, my music does not show up, only hers.
    Did you copy your files to her computer?
    This is what you need to do.
    I need her files off of my computer, but do not want to delete anything of hers.
    No idea what this means?

  • Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

    Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an antennae?

    I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an additional antennae?   If so, which one because my research is confusing me about what is supposed to work with this computer.

    Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

  • ITunes not seeing my iPhone4...

    This is prolly an old one, but here goes...
    Phone arrived yesterday, attempted so sync on MacBook pro (running Leopard), iTunes not seeing phone.
    Re-installed iTunes 9.2, everything fine.
    Today, attempting to do some more syncing, and, once again, iTunes has amnesia.
    What's going on here?
    Any help would be truly appreciated.
    Thanks.

    Just got my iPhone 4 today -iTunes doesn't see mine. Did your issue ever resolve? The phone says NO SERVICE. Was that your issue, too?

  • I just opened  asd file in cs6 but I could not see anything

    I just opened  asd file in cs6 but I could not see anything
    I tried to open the psd file in cs6
    the photoshop open byt without anything in it
    I want to use kwik2 with it
    I don't have cs5

    What’s kwik2?
    http://forums.adobe.com/thread/419981?tstart=0
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

  • Rented a movie on my mac - trying to watch on apple tv (i think 2), but iTunes not "seeing" apple tv - so i can't 'move' the rental to the device.  ??

    rented a movie on my mac - trying to watch on apple tv (i think 2), but iTunes not "seeing" apple tv - so i can't 'move' the rental to the device.  i'm brand new at apple tv - do i need to enable it or something?

    Is it the little black box? If yes then it is the 2nd model. It won't show up in iTunes as there is no syncing involved. The only time it does is when you connect and need to restore the device.
    You need to enable home sharing in iTunes and on ATV

  • My Iphone 4s was not dropped and when I went to use it the screen was completely covered in blue and red lines I can not see anything is there something that I can do to fix it?

    The screen is blue striped and when you try to reset it goes to blue and red.  Can not see anything HELP

    Bring the phone to Apple for evaluation.  Sonds like a hardware issue.

  • HT6154 Accidentally lowered brightness on my 5s can not see anything or make it brighter

    Accidentally lowered brightness on my 5s can not see anything or make it brighter

    Settings > Wallpaper & Brightness Adjust the brightness slider.

  • I could not see anything in txn BPSO

    Hi,
    I am in Development. I don't know what happened. When I went to BPSO, I could not see anything. Can someone help me out in knowing why it has happened. yesterday everything was fine. But today I could not see anything.
    Regards,
    Tony

    Hi Tony,
    Probably everything deleted in BPS0...Don't panic, i'm just kidding
    Try Edit - General Overview in Menu Bar.
    Regards
    Tarun

  • I have downloaded Firefox 5 but am still am getting frequent remineders to upload ner security app. When I click all I get is about downloading the general program. I do not see anything for just updating security. What am I supposed to do?

    I have downloaded Firefox 5 twice. Now I am getting an e-mail telling me to download the new security attachments. When I click it what I get is downloading Firefox 5. I do not not see anything about downloading a new attachment for security purposes. When I click downloading Firefox 5 I am told that I already have it. How do get just the security component.
    Dr. Laurie

    Firefox does not send emails to users about anything. Who is the sender of that email? It's probably a scam. You have Firefox 4.0.1 as indicated in your System details. You might want to scan your Mac with anti-virus/spywares programs to make sure no malwares and/or spywares were installed. That could have explained why you received such email.
    FYI, Even if your email has an attachment, you should never open it unless it's being sent from someone you know.
    And are these reminders come in the form of emails or pop-ups? If they are emails, I'll report them as spams and delete them.

  • My Iphone 5 has gone blank, I can not see anything. Restore with itunes has not worked either. Can someone please help?

    Hi I recently upgraed to iOS 6.1 on my Iphone 5. After the upgrade, it was all good. Over the weekend I went Austria for Ski. While taking the photos, I simply locked the phone and kept it my pocket as I had to go. After sometime when I opened my phone, I could hardly see anything. I tried to unlock with pin and tried restarting with great difficulty. But nothing worked. Coming back home today, I have tried restore the software and still no luck. I have tried restore almost 5 to 6 times, but the screen is still blank. I dont know if what state it is in and I can not do anything to fix it. I am very annoyed with the support service as they can not be reached on Sunday evening.
    I could manage to book a call tomorrow but I have lot of work over next few days at work. Can someone please help how to fix this issue now? Any suggestions will be much apperciated.
    Thanks,
    Srini

    srinifromlondon wrote:
    ...  Any suggestions will be much apperciated...
    Try this Discussion
    https://discussions.apple.com/message/19521062

  • ITunes not seeing the library on a shared drive

    Greetings,
    I recently upgraded to iTunes 11. I upgraded the application on 3 computers. All computers (2 running Snow Leopard and one running Lion) have been authorized for iTunes and access a networked library. The upgrade was successful and and all computers "see" the correct shared library.
    My problem is with the unit running Lion. That computer has 2 users, myself and my wife. I generally do not use the computer, but I set up all the computers in the home, so I automatically create an account for myself. Early on I created and configured my wife's account to use iTunes.
    Recently, (after upgrading) I decided to configure iTunes for my account on that computer. (My regular computer is older and I need to start using the iPhoto application on her computer, mine has run out of space.) When I tried to run the new iTunes, my account would not "see" the iTunes library.
    Do I need to authorize (to use iTunes) this account, even though my wife's account on this machine was authorized awhile ago?
    Why would my account library be different from her account library (I have confirmed that the library file path is the same.)
    Ultimately I want to be able to use my wife's (newer) computer to sync our (3) iPads. Right now, under my account I am unable to do that.
    Any suggestions?
    Tim Kern

    sceptomaniac wrote:
    I have put the library on an external drive connected by usb to my wireless router.
    what exactly have you put on the external ? the entire iTunes folder or just the iTunes music (or media) folder ?
    On my iMac I can select the itunes folder on the drive in itunes advanced preferences and my music shows up in the itunes window an I can play it. But on my MacbookPro although I can select the folder, nothing shows up in the itunes window.
    this leads me to believe that you consolidated the iMac's library to the external but kept the library files local. pointing iTunes media folder location to a new spot tells iTunes where to put new additions to your library, but not where the current content is.
    what you need to do is to copy the entire iTunes folder to the external, then (on each Mac) launch iTunes while holding the option(⌥) key, click on choose library when prompted, and select the iTunes folder you copied to the external.
    note only one Mac at a time can access the library !

  • HT1751 I need to set up iTunes to run on my local network, independent of the internet because of a bad internet connection.

    I have Hughes Net, for internet. Due to this, iTunes in the cloud, does not operate for us. I need to put my music on a local drive, and create a network drive, to use iTunes, while at home. (I'm still not sure about how I'll handle the music on our iPhones). I have a current AirPort Extreme, (802.11ac), and I have a 64gb flash drive, as well as a 1.5TB external SATA drive, that can be used. I'd like to NOT have to keep the MacBook Pro powered on all the time, but would still like to play music, through/on my iPads and iPhones, while at home.
    How can I set this up, to run, independent of the cruddy internet service, which won't allow me to stream a single song, without stopping to buffer, for multiple long periods, during one song?

    itunes can share music over the network without an internet connection, but you will need a computer running itunes powered on to be able to share it (setup in itunes by going to file (windows) or itunes (mac) > preferences > sharing)
    if you just want to setup a network attached storage drive for the network that holds all the music that would be done independently of itunes and you would need a compatible NAS drive (I don't believe the airport is technically a nas drive but you could ask that section of support communities as well https://discussions.apple.com/community/wireless/airport)

Maybe you are looking for

  • T43p no longer recognizes 2877 docking station

    My ThinkPad T43p no longer recognizes when it's installed in my ThinkPad Dock II (2877) docking station.  Thinkpad has latest possible BIOS and Lenovo power management updates.  It runs Windows XP SP3 at latest possible updates.  It normally runs in

  • Where would i get the little screws online for the bottom of my mac?

    i sent my mac to get fixed buy apple over a year ago now most of the screws have come out the bottom and ive lost them? he probly didnt screw them in tight enuff? does anybody know where i can order some online with a little screw driver to?

  • Authrization to execute FM from RFC lookup

    Hello All, I am doing a RFC Lookup(which is available in PI 7.1) to a Function Module which is residing on my PI ABAP stack from my message mapping. To do a look up I have created a RFC receiver channel and configured the channel accordingly. And pro

  • Infoobject where-used list in Queries

    Hi all, Is there a way to find a list of all queries in which a specific infoobject is used? thanks Sabrina.

  • No output display (J2SE 1.4.0 SDK on W2k)

    I'm running a simple Hello World program on a Windows 2000 Server (with SP3), I've J2SE 1.4.0 SDK installed on my computer. I've no problem compiling the program but I can't see the output when I run this simple program! Even when I did a simple "jav