Itunes not showing elements 11 drop down list of albums and won't sync, says ïtunes cannot sync, required folder cannot be found. ï have tried re installing both but no success. pls help!!!

Hi, Itunes won't sync my photos to ipad from elements 11. itunes doesn't show drop down list of albums and says Ipad "......cannot be synced, required folder cannot be found" i have tried re installing both programs but no luck. pls help!!!

I managed to finally fix the problem in a relatively painless way. It turned out that the problem wasn't on my phone, the problem was with iTunes. I completely uninstalled iTunes from my PC and then reinstalled it and everything was fine.
In order to completely uninstall iTunes, I did two things:
Used RevoUninstaller to uninstall iTunes. This cleans out a bunch of extra things that the normal iTunes uninstaller misses.
Searched for any iTunes folders/files on my computer (using the freeware utility called Everything) and deleted them manually.
I hope that works for you.

Similar Messages

LMS 4.2.3 variable name not show in drop-down list

Hi all,
I am trying to use performance threshold to trigger a script whild device CPU or Memory high.
There is a default threshold template called "CPU Utilization" and "Memory Utilization".
After I choose either one, there should be one or two variable name in drop down list.
But I only see "Select MIB Variable" in the list.
I try to create a template with exact the same variable but still got nothing in the list.
The strange thing is that no all the default template has this problem.
I can see variable name under some template like "Device Availability" or "Port Availability"
And this is not browser problem because I try both IE and Firefox.
Any one how to solve this?

Thanks for your advice.
Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking don't show me informations.[WS3550 2 devices and 2 WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
SNMP, Credentials all is good.
I try resolve this problem many days, but without results. Its semmes like a bug.
ANy propositions?

My area is not on the drop-down list?

just applied for skype number but my area is not on the drop-down list can't get any further until I choose something from the list, what do I do, just pick the nearest area?
Post transferred to create its own new thread (topic);
subject/title edited accordingly.

Hi, ladyfromllan, and welcome to the Community,
Yes, you are correct: you would need to choose a Skype Number nearest where you ultimately wished to have your Skype Number located. Ultimately, the number would be best situated so that those who call it the most would not incur toll charges; however, that said, Skype Numbers are not available absolutely everywhere for several legitimate reasons.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Show the drop down list of variant on the selection screen in ALV reports

Hi,
i have a alv report when i execute this display will come and then i click display layout it save as a variant on the selection screen and when i go back to selection screen and press f4 on the display variant its show the drop down list of varient.
can u send me some code for this functionality...its very urgent.
thanks!
Vipin

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. hat do I d

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. What do I do next?

Contact support by web chat.
Mylenium

Rejected Quotation Should not appear in Drop Down List

Dear All,
While Making PO With Reference to RFQ.
In ME21N while selecting Rejected Quotation should not come in Drop Down List
Only Those RFQ with Accepted should come
Regards
Amey

Can it be done in Standard Tcode.
Are there any customisation for it
Regards
Amey

In develop "mode" and I can't locate my "Basic" slider that opens up my "Treatment" sliders. There's not even a drop down arrow to Minimize and open. I was working in it and the next moment it was gone. I'm in Lr 5 using a trackpad. Seems like the issue c

In develop "mode" and I can't locate my "Basic" slider that opens up my "Treatment" sliders. There's not even a drop down arrow to Minimize and open. I was working in it and the next moment it was gone. I'm in Lr 5 using a trackpad. Seems like the issue came up while using my trackpad. Any thoughts?

In the Develop Module, you right-click on one of the other Panel Headers (for example, Tone Curve) and then place a check next to Basic

I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren

en

I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

TextBox does not update when drop down list selection changes

I have drop down list the user can select a client name from. Once the client is selected and the "view report" button is clicked it the report has a textbox that displays the Client name or it is supposed too.
The report will display the first client name but any subsequent client name does not display on the first. I am pretty sure that is because I have chosen the "Dataset" where the both the "values' have "first" in front of the field.
How do I get the textbox to update to match as each client is chosen from the drop down list? I cannot use the report "parameter" I am passing to the stored procedure because the drop down list's parameter is the database name not the client
name.
Any help is appreciated.
Thanks,
Sue

Okay, sorry but I am just getting back to my report. I still cannot display the Client Name in a text box at the top of my report. The textbox must be dynamic because my client name can be one of many that is picked from a drop down list box.
I added a textbox and tried to use the "join" with my Parameter - clientname.
In the textbox expression I used the following:
=JOIN(First(Fields!ClientName.Value,
"GetDatabaseName"),",")
I got this error message:
[rsRuntimeErrorInExpression] The Value expression for the textrun Textbox1.Paragraphs[0].TextRuns[0] contains an error: Overload resolution failed because no Public 'Join' can be called with these arguments:
    'Public Shared Function Join(SourceArray As String(), [Delimiter As String = ]) As String':
        Argument matching parameter 'SourceArray' cannot convert from 'String' to 'String()'.
    'Public Shared Function Join(SourceArray As System.Object(), [Delimiter As String = ]) As String':
        Argument matching parameter 'SourceArray' cannot convert from 'String' to 'Object()'.
Preview complete -- 0 errors, 1 warnings
I also tried setting up a "filter" on the clientname using these instructions
Right-click the dataset (GetDatabaseName) to open the Dataset Properties.
Click Filters in the left pane, add a filter like below:
Expression:[DBName]
Operator: In(multiple-parameter) or =(signal-parameter)
Value:[@DBName]
I get an error message too which I am not even going to display.
I can set it up and run it as long as I don't want to change the value in the "textbox" to match the value in the drop down list. I am totally frustrated at this point. Why won't it work?
Simply put - I want the value selected in my drop down list box to match the value in my textbox at the top of my report if drop down list says "Susie" then I want "Susie" in my textbox or if drop down changes to "Bobby" then I want Bobby to show up in my
textbox when I generate my report.
Any suggestions of what else I may need to try?
Thanks for the help.
Sue
Sue

ODBC driver does not appear in drop down list

We created a system DSN using Unix ODBCConfig and the drivers
supplied by IBM in its iSeries Access package. We are trying to
connect to our AS400. We now have Coldfusion installed on SuSe 9.3
Open Enterprise Server. Coldfusion runs fine. When we try to add a
data source in the ColdFusion administrator, the system DSN driver
that we configured does no show up in the drop down list. Did we
miss a step? We have done this succesfully with coldfusion on
Windows 2003 server.

What version of ColdFusion are you running? I know with MX 7,
your individual DSNs may not be listed, ODBC or otherwise, only the
driver types. You are prompted to provide a valid Data Source name,
then to select a valid driver type, which in your case would be
ODBC Socket.
Phil

HCM Processes & Forms: Field not updating after Drop Down list selection

Hello all,
I am having a problem that I think happens a lot, but I can't solve it through all the examples given here.
I have a Drop Down List where I change the value. On the CHANGE event, I have:
xfa.record.CONTROL_PARAM.ISR_EVENT.value = "GET_ORGINFO";
ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
I have defined a User Event called GET_ORGINFO. It gets triggered fine. It moves into my generic service that I defined, and it changes the value that I want to change.
When I look at the PDF, the value is still in it's old value. So, after reading some blogs, which specifically says, if something goes wrong in one service (I have 3: my own, SAP_PA and S_MGRS_POSITIONS), they all fail. I debugged and checked, and, after some changes, nothing goes wrong anymore, nothing that I can see anyway.
So what I do see, is that there's a call made like this:
CALL METHOD me->process_data_container
    EXPORTING
      ref_to_data_container = ref_to_relevant_data_container
      operation             = c_do_operations
      message_handler       = dummy_message_handler
      no_auth_check         = no_auth_check
    IMPORTING
      is_ok                 = operation_ok.
Within this method, my new value is listed (in the table VALUES_OF_FIELDS). After this call is made, so when it exists the method process_data_container, the old values are back in VALUES_OF_FIELDS.
So, at the last moment INSIDE the method, the values are correct, as soon as it steps out of this method, the old values are back.
Does anyone have any idea? Am I doing something wrong with regards to the User Events? I am on EnhP 04.
Gr,
Jaron Frenk

Hey Chris,
Unfortunately, that's not it. I did check the fields I need. Everything is going ok. As in, I get the fields (with their current values) in my own generic operation. I see everything updated the way it should. But then at the end, nothing happens...
What exactly do you mean by " then make sure your own generic service has it's input/output defined correctly". What input/output do you mean? I assume the generic service itself is okay, since it works with the user event "USER_EVENT_CHECK". And it sure is possible I am forgetting something in the definition of the user event, but I can't figure out what.
A small addition*
I just checked by user event. I have 3 fields selected:
I0001_PERSG
I0001_PERSG_TXT
I0001_PERSK
The generic service should get the PERSG and PERSG_TXT based on the PERSK that is entered. I don't think I need anything more.
Gr,
Jaron
Edited by: J. Frenk on Apr 26, 2010 9:01 AM

Lotus Notes Missing in Drop Down List for Calendar Synch

Hello there,
   A) I am attempting to synch my blackberry tour with my calendar in Lotus Notes 8.5.2. I was able to previously synch my calendar when I had Lotus Notes 8.5.1, but since our upgrade to 8.5.2, I get an error saying it could not find a supported version of Lotus Notes.
B) When I try to go in and configure the organizer section of the desktop software, there is no option for the drop down list for Lotus Notes. I have tried uninstalling, rebooting and then reinstalling (based on info from other posts), but none of that seems to work. I have checked and all the connectors are there, but for some reason, they are not being recognized. Is there some specific key or file that intellisynch is looking for to know that Lotus Notes is installed on the machine?
Now, I am assuming A&B are symptoms of a common problem, but I am at a loss as to how to move forward. Any ideas on how I can get this software to recognize Lotus Notes? I appreciate any help you can give.
Thanks,
Rick

While calling method SET_TABLE_FOR_FIRST_DISPLAY pass 'A' to paramater I_SAVE .
CALL METHOD grid1->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                is_variant       = gs_layout
                i_save           = 'A'
                i_default        = p_def
      CHANGING it_outtab        = gt_sflight.

My country ( EGYPT ) is not on the drop down list for the FaceTime app ?

While trying to use the FaceTime app.on my iPad I was asked to identify my region I did not find my country EGYPT on the drop down list of all countries .
What shall I do ?
pls. Help...
Thank you .

We are users. Contact Apple.

Adapter Engine NOT in the drop-down list - RFC adapter, Communication Chan

Hello XI Experts,
I recently installed IDES (ERP2005) along with XI (NW2004s). I carried out the post installation steps for XI. I set up XI (technical systems, business systems, etc).
I have started to create an RFC to File XI interface. I have carried out the necessary steps in the Integration Repository and am now setting up the scenario, etc in the Integration Directory.
I have reached the stage of creating the communication channel of type RFC for the sender system. However, when I do this, the adapter engine is empty i.e. there are no possible entries in the drop-down list. I was expecting to see "Integration Server" as a possible entry.
Could someone advise me on what I may have missed which leads to this problem?
Thanks and regards,
Nicholas.

Hi,
You have to get the SWCV from SAP market place.
Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 2004S -> Entry by Component -> Content PI/XI
XI CONTENT SAP_BASIS 7.00 / 6.40
You have to upload the file in the Integration repository
Best regards
Omar

All drop down lists flicker on and off while typing or right clicking.

All drop down lists in Firefox, whether it's the menu drop downs, the autocomplete drop downs in the URL bar or the Search field, or even autocomplete drop downs in website form fields, flicker on and off as I type, or when I'm right clicking a link to open in new window or trying to copy a link. I can sometimes get what I want by waiting for it to flicker on and clicking at just the right moment, but it often doesn't work at all. I have a fresh install of Firefox 13.0.1 with no running add ins, plugins or other 3rd party tools. (The troubleshooting info says I have the Adobe Create PDF Extension enabled, but it's not)
None of the suggested fixes I've found in the forums seem to apply here, cause they're all related to add-ins that I don't have.
Any other ideas?
Thanks

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Itunes not showing elements 11 drop down list of albums and won't sync, says ïtunes cannot sync, required folder cannot be found. ï have tried re installing both but no success. pls help!!!

Similar Messages

Maybe you are looking for