ITunes not starting up after update, errors showing

I recently received an updated iTunes and I'm getting two errors from previous issues.
I have tried every single step with uninstalling, then reinstalling the program. As well as removing a previous issue that has happened before to no avail.
Can this issue be fixed with the updates?
I'm on Windows XP without a iPod Touch

ok THANKS so much!!
it now works!!
First I removed iTunes.app from my system using these instructions: http://www.tekrevue.com/tip/uninstall-itunes/
Next I opened the App Store and it showed me iTunes under "Updates".
I reinstalled iTunes via the App Store and now I can launch iTunes as expected.
Because I didn't delete the iTunes folder inside my user's folder, all my content remained.
thanks  to you :
uwe eberhard

Similar Messages

  • New Macbook Pro does not start up after updating...HELP!!!

    Hi,
    My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
    Can somebody please help me?

    You should probably post your question in the MacBook Pro discussions:
    http://discussions.apple.com/category.jspa?categoryID=190

  • ITunes not starting up after Yosemite update

    Hi Community,
    Just updated my MacBook (13", Aluminum, late 2008) to Yosemite.
    Having done this iTunes is not starting up any more. Also downloading and a second time updating iTunes 12.01.26 didn't help.
    Can anyone help me with this ?

    ok THANKS so much!!
    it now works!!
    First I removed iTunes.app from my system using these instructions: http://www.tekrevue.com/tip/uninstall-itunes/
    Next I opened the App Store and it showed me iTunes under "Updates".
    I reinstalled iTunes via the App Store and now I can launch iTunes as expected.
    Because I didn't delete the iTunes folder inside my user's folder, all my content remained.
    thanks  to you :
    uwe eberhard

  • Not starting up after updates

    I just got a G3 iBook 500Mhz 384Mb off ebay, OS10.4.9, which worked fine. So I decided to install some of the available software updates, instead of just letting it be! A couple of iphoto updates, keynote, iweb, java, final cut, etc,went in fine until the 10.4.11 update which would not complete - got to 12% or something and then said an error was detected so it stopped. I stopped doing updates, my boy played an internet game for a wee while, then shut down. Now it won't startup - I get a tone, the spinning gear for 20secs or so, then the blue screen with the white box saying Mac OS X and an empty progress bar, and a while later the spinning beachball appears, to be with me for a few hours. Nothing else. Some suggestions please? (I also have a MacBook Pro, with 10.4.11, if that might be helpful, and while I'm not experienced at computers, I'm quite prepared to try things.
    Many Thanks.

    Oh.
    Ah well. I'll get back to the seller - again. He earlier suggested 1. resetting the P-RAM, 2. resetting the open firmware, 3. safe boot. None of these worked. He then suggested booting from the disc(pirated) and reinstalling. This worked to an extent, but this morning it would not start up again - but it did get as far as the login, then after logging in it went to a background, with an arrow pointer, and no further (I did leave it for over an hour), while last night it did get past that point(slowly) and worked ok.
    So, now I'm trying to reinstall again ( a smaller custom install) then I'll delete the most recent previous system folder, and some other apps that came with it (pirated too!!?)
    I guess I may (should) buy a retail copy.
    Why didn't I just leave it alone???
    Any other advice?
    Regards
    Roger

  • Slim does not start lxde after updating

    Hi!
    After updating the other night I cannot log in to lxde anymore. Slim gives me
    Failed to execute login command
    I read my way through the internet for similar threats and problems. I already checked whether my slim.conf is ok. I checked whether X is running ok. And Im not sure if it is.
    I did
    grep -e "2012-09-19" /var/log/pacman.log
    to see what was updated. And it was xf86-video-intel and tzdata and the kernel.
    Im running arch on a eeepc 701 with intel graphics. I have Slim and lxde. I can ssh onto the machine from outside.
    If I take slim from the deamons in
    /etc/rc.conf
    I can
    startx
    but I only get a black screen on tty7 and on tty1 I get
    No protocol specified
    . And after some time I get
    xinit: giving up
    xinit: unable to connect to X server: Resource temporarily unavailable
    waitiing for Xserver to shut down Server terminated successfully (0). Closing log file.
    xinit: server error
    I noticed that I didnt have "i915" in /etc/mkinitcpio.conf, so I added that and built iniramfs. But that didnt help the issue.
    Maybe anyone cand help me out here?
    Thanks for your time!

    It definitely sounds like something went wrong with your video update.  Can you downgrade to confirm that is the problem?  If so, my next thought would be to remove the recently downloaded version from your package cache  and re-upgrade.
    If downgrading doesn't help, then perhaps my assumption is wrong, then full Xorg logs would be useful. Actually, they'd be useful in either case ... so can you post those (or pastebin them and link to it).

  • Lightroom not starting up after updating to CC (2015)

    Adobe CC updated my Lightroom CC (2014) to CC (2015)  Now Lightroom will not start.  I have uninstalled, rebooted, installed again and still does not start up.

    Tstoikka did you utilize the uninstall process documented in Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html to remove your current installation of Photoshop Lightroom?  Are you able to install other Adobe Creative applications successfully?

  • Itunes not detecting iphone after updating to ios7 & updating itunes to 11.1.. Can anybody help??

    I have updated my iPhone5 to ios7 & have also updated itunes to the latest version. After the update itunes is not even detecting my iphone.
    I am currently using windows 7 professional. I have also uninstalled & reinstalled itunes multiple times. Even tried restarting apple device servies on my laptop.
    I have tried everything but of no use. Can anyone help me on this??

    Device not detected in iTunes

  • Apple TV not starting anymore after update

    My Apple TV is set on applying updates automatically. When I started it yesterday it showed a message that an update had failed and encouraged me to perform the update manually. I did so in the settings and everything looked normal. The updated was first downloaded and then the installation performed however at the end of this task the Apple TV shut down and now I cannot start it at all anymore. Holding down Menu and Down on the Apple Remote for six seconds does not work either.

    If you really want to restore your system [this link|http://docs.info.apple.com/article.html?artnum=61802|How to restore your Apple software] might be of some help... It boils down to this:
    *Restore Mac OS X and all bundled applications without erasing the Mac OS X volume*
    1. Back up your essential files. This is a wise precaution even though you won't be erasing the volume.
    2. Insert the Mac OS X Install disc that shipped with your computer.
    3. Double-click "Install Mac OS X and Bundled Software."
    4. Follow the onscreen instructions to reinstall all software.

  • E65 not start-up after updated new firmware

    Hi,
    Yesterday I conected to PC suite and updated firmware from 2.0.... to 3.0... > Everything went through smoothly. After I restored all information from back up files of PC suite, then I could not use my phone any more. Everytime I try to restart my phone, the message " Phone start-up failed. Contact to retailer "
    Could any one help me to make my phone back to work, please ? Thanks a lotttttt

    Try the "3 finger deep reset" which is depress these three keys simultaneously "*" "3" "green phone" and then power on phone whilst keeping those same three keys depressed until you hear start-up tone.
    This should ONLY be done if the device doesn't power up normally anymore and it wipes everything in the Phone memory that is not part of the ROM.
    You will need to restore your data after this.

  • Mac book not starting up after update

    after installing the latest update on Mountain Lion my Retina MBP dies after trying to boot. any help would be great.

    Hopefully you have a backup. Your hard drive may be failing. I'd try a few things:
    if you have any peripherals, like mice or keyboards, unplug them and try again.
    try a SMC reset Intel-based Macs: Resetting the System Management Controller (SMC)
    a safe boot Mac OS X: What is Safe Boot, Safe Mode? 
    boot to your recovery partition and repair your hard drive and permissions When to Run First Aid in Mountain Lion's Disk Utility - For Dummies 
    if that doesn't work, try internet recovery OS X: About OS X Recovery
    if you can get your computer booted in one of the recovery modes, but it can't be repaired successfully enough to start into the regular boot partition, you may need to erase the drive and start over with a clean installation.
    You might be able to get your hard drive to mount in target mode on another mac, which would let you back up any files that you want to save on the drive:  OS X Mountain Lion: Transfer files between two computers using target disk mode
    if you can't get any of this to work, then the drive quite possibly is failing, and should be replaced.

  • Computer not starting up after updates

    I updated the software on my computer and restarted the computer. When it came back up it said i needed to shut down my computer for the firmware and when i was turning it on, i should hold the power button until it flashed. I did this and the computer will not turn on. I don't have a clue as to what happened and any advice would be great.

    Try this: Resetting the System Management Controller >>
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    iTunes: MacOSG Podcast
     An Apple User Group 

  • HT201272 I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore the

    I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore these?

    "I did make a full back up of my phone prior to updating the iOS"
    Itunes content is not incliuded in the backup that itunes performs.
    Audiobooks are not part of icloud and cannot be redownloaded.
    You can try contacting itunes support and asking for an exception.

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • "Could not start the linksys updater service" error message

    I purchased a WRT160N router and everything worked fine for a while. After a few days, I would lose the wireless connection. I spoke to the geeks at Best Buy, and they said the unit was probably bad, so I exchanged it for a new one.
    Before setting up the new one, I figured I'd uninstall the Linksys EasyLink Advisor software in case the new router had a different version. I then started to install the software. But now the installation fails with error message "Could not start the Linksys Updater Service". I tried manually starting it, but it aborts with an error message "The process terminated unexpectedly" .
    Does anyone have any suggestions what I should do now? 

    Well if you are trying to setup your router using the setup disk, you can exit from the setup and configure all the settings on your Router Manually.
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link

  • Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

    Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
    ''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
    BuildID: 20100914125854
    CrashTime: 1290192405
    EMCheckCompatibility: true
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1287124738
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 422
    StartupTime: 1290192405
    Theme: classic/1.0
    Throttleable: 1
    Vendor: Mozilla
    Version: 3.6.10
    This report also contains technical information about the state of the application when it crashed.''
    Same thing happens when i click restart.
    No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

    Did the crash reporter send any crash reports?<br />
    You can see the crash reports in this folder:
    "C:\Users\&lt;user&gt;\AppData\Roaming\Mozilla\Firefox\Crash Reports"
    See: http://kb.mozillazine.org/Breakpad
    See also [[Firefox crashes when you open it]]
    Create a new profile as a test to check if your current profile is causing the problems.<br /><br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br /><br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br /><br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br /><br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox<br /><br />
    If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    See:
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Maybe you are looking for

  • Can't figure out how to make "sub-tabs" / Too many "top-tabs" / Other ?

    First of all, the website that I am webmaster for is: www.cindydennis.org . I am having some problems: 1) There are TOO MANY tabs at the top. I can't figure out how to make sub-headings on one page... For example, I'd like on the "About CDM" page, ta

  • Oracle Applications 11i Load Balancing does not work with RAC one Node

    Hi all, Could you help me to resolve this issue. Architecture environment is : - One APPS tier node - Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node. - The

  • Mac OS 10.7.5 No sound through external speakers

    I have had this iMac for about two years with the Bose Companion 20 external speakers hooked up. All of a sudden there is no sound through youtube. iTunes, speakers work fine. BTW I also have a MacBook Pro that is about three months old and after a s

  • 2N3055 access denied in multisim

    Hello I'm a student and im trying to design a project for school and im using 2N3055 from my database but its telling me access is denied for some reason. Is this becuase I have the student verison. If so how can i update it or get it to allow access

  • No automatic iPhone pics --- iPhoto

    As of today, I've done an Erase and Reinstall of OS 10.4 as well as a restore on the iPhone, and I can not regain a feature I had when I first purchased this iPhone. I would like camera pics from the iPhone to be automatically sent to the computer wh