ITunes not starting up after Yosemite update
Hi Community,
Just updated my MacBook (13", Aluminum, late 2008) to Yosemite.
Having done this iTunes is not starting up any more. Also downloading and a second time updating iTunes 12.01.26 didn't help.
Can anyone help me with this ?
ok THANKS so much!!
it now works!!
First I removed iTunes.app from my system using these instructions: http://www.tekrevue.com/tip/uninstall-itunes/
Next I opened the App Store and it showed me iTunes under "Updates".
I reinstalled iTunes via the App Store and now I can launch iTunes as expected.
Because I didn't delete the iTunes folder inside my user's folder, all my content remained.
thanks to you :
uwe eberhard
Similar Messages
-
MacBook Pro Mid 2012 not starting up after Yosemite Update
I'm using a MacBook Pro mid 2012 model , enrolled into Yosemite Public Beta Program ...
After the official public launch , app store suggested that i rather update from beta 5 to beta 6 , as downloading extra 5 gig of OS data seemed unnecessary for me , I just updated from the app store.
Post the update , after shutting down my MacBook , I tried starting it up after 8 hours , it failed to respond to any of my prompts .
Keyboard not responding
Power Button not responding
Li-Po Battery indicator alone works ,
When plugged MagSafe , it indicates charging .
The Sleep Indicator (in the front - that of hard disk drive ) blinks occasionally.
Later, when i tried powering up with MagSafe , It booted luckily , after some 20 hours of work , i shut the system down ,
Again when i tried booting up , it failed .
The problem persists since 3 days.
I tried booting up in Safe Mode - No result
Tried Verbose Booting up - No result
Cleared NV RAM - No result
Cleared SMC as Apple instructed for Intel Based MacBooks - No result.
Removed Battery and kept aside for a while , After an hour tried powering up , It booted up , Went till Apple Logo , The loading bar was some 45%
Then it started to go down with a black screen ,
It never starts up again.
After regular intervals of removing and installing battery , it starts up to white screen and goes off.
I am really worried and desperate now.
I am not sure whether my HDD is dead or my Battery is dead or my Logic board is dead or my Yosemite Install was not right ?
After hours of online research , nothing seems to be helpful .
People at Apple Care (Premium ReSeller , India) are so irresponsible in attending the issue ,
They say its helpless without even doing some basic troubleshoot.
Where would it have went wrong and What am i supposed to do now ?
PLEASE HELP !!darkrider92,
I have the same model MacBook Pro as the one that you got from your mom. Were you able to install the 10.6.8 update successfully onto the factory drive? Were you using the factory RAM when you tried to install the 10.6.8 update on the SSD?
Have you checked the Web site of the SSD’s manufacturer, to see if there’s a firmware update available for the SSD?
You can download the 10.6.8 update outside of Software Update from Apple here; in case you need to try to install this update several times, running it from your local disk would be more convenient than waiting for it to download again. -
Lacie Rugged external drive will not show up after Yosemite update.
Lacie Rugged external drive will not show up after Yosemite update. It show up in disc utility I can't access it.
I have the exact same issue. Have you had any luck with a solution?
-
VirtualBox does not start correctly after kernel update
Just recently I have been unable to start VirtualBox after a kernel update. That is to say it seems to be running, but displays nothing.
The following processes are listed: VirtualBox, VBoxSVC, VBoxSVC, VBoxXPCOMPCD
The following modules are loaded: vboxdrv, vboxnetflt, vboxnetadp
Yesterday, when the same thing happened, I reinstalled VirtualBox and it worked correctly again.
I recently upgraded to systemd which has caused me some other problems, so that might have something to do with it
Cheers
Andrew
* Arch x86_64 up to date, NVidia proprietary drivers, AMD processorUpdated - Rebooted (systemd does hang on reboot or shutdown but turned PC off and restarted)
Confirmed that vbox modules are loaded:
vboxnetflt 16807 0
vboxnetadp 18419 0
vboxdrv 1823469 2 vboxnetadp,vboxnetflt
Started VirtualBox - nothing displayed.
ps -el shows
0 S 501 1036 614 0 80 0 - 111245 futex_ ? 00:00:00 VirtualBox
0 S 501 1050 1 0 80 0 - 29408 poll_s ? 00:00:00 VBoxXPCOMIPCD
0 S 501 1056 1 0 80 0 - 53178 futex_ ? 00:00:00 VBoxSVC
output as above
$ uname -a
Linux ezcool 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012 x86_64 GNU/Linux
# pacman -Qi linux
Name : linux
Version : 3.6.4-1
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.6.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia virtualbox-host-modules
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 61124.00 KiB
Packager : Tobias Powalowski <[email protected]>
Architecture : x86_64
Build Date : Mon 29 Oct 2012 09:55:27 CET
Install Date : Wed 31 Oct 2012 12:28:40 CET
Install Reason : Explicitly installed
Install Script : Yes
Description : The linux kernel and modules
# pacman -Qi virtualbox-host-modules
Name : virtualbox-host-modules
Version : 4.2.4-2
URL : http://virtualbox.org
Licenses : GPL
Groups : None
Provides : None
Depends On : linux>=3.6 linux<3.7
Optional Deps : None
Required By : virtualbox
Conflicts With : virtualbox-modules
Replaces : virtualbox-modules
Installed Size : 168.00 KiB
Packager : Evangelos Foutras <[email protected]>
Architecture : x86_64
Build Date : Mon 29 Oct 2012 17:23:20 CET
Install Date : Wed 31 Oct 2012 12:29:06 CET
Install Reason : Installed as a dependency for another package
Install Script : Yes
Description : Host kernel modules for VirtualBox
Kill all VBox processes, VBoxSVC does not quit but is marked (defunct)
Reload modules
Confirm modules loaded
vboxnetflt 16807 0
vboxnetadp 18419 0
vboxdrv 1823469 2 vboxnetadp,vboxnetflt
Start VirtualBox - nothing
pacman -Rdd virtualbox-host-modules
pacman -S virtualbox-host-modules
modprobe vboxdrv
Start VirtualBox - nothing
pacman -R virtualbox virtualbox-host-modules
pacman -S virtualbox virtualbox-host-modules
useradd -G vboxusers
Start VirtualBox - nothing
The problem seems to be something to do with nspr-2. I am getting multiple errors in the journal:
Oct 31 14:16:46 ezcool kernel: INFO: task nspr-2:1007 blocked for more than 120 seconds.
Oct 31 14:16:46 ezcool kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Oct 31 14:16:46 ezcool kernel: nspr-2 D 0000000000000246 0 1007 1 0x00000000
Oct 31 14:16:46 ezcool kernel: ffff8803d67b9d68 0000000000000082 ffff8803d65b0810 ffff8803d67b9fd8
Oct 31 14:16:46 ezcool kernel: ffff8803d67b9fd8 ffff8803d67b9fd8 ffff8804194a58b0 ffff8803d65b0810
Oct 31 14:16:46 ezcool kernel: ffff880300000041 ffffffff8119df46 ffff88042fffdb08 0000000000000001
Oct 31 14:16:46 ezcool kernel: Call Trace:
Oct 31 14:16:46 ezcool kernel: [<ffffffff8119df46>] ? mntput+0x26/0x40
Oct 31 14:16:46 ezcool kernel: [<ffffffff811251cc>] ? __alloc_pages_nodemask+0x16c/0x960
Oct 31 14:16:46 ezcool kernel: [<ffffffff81491a09>] schedule+0x29/0x70
Oct 31 14:16:46 ezcool kernel: [<ffffffff81491cd7>] schedule_preempt_disabled+0x27/0x40
Oct 31 14:16:46 ezcool kernel: [<ffffffff81490368>] __mutex_lock_slowpath+0x148/0x340
Oct 31 14:16:46 ezcool kernel: [<ffffffff81490576>] mutex_lock+0x16/0x30
Oct 31 14:16:46 ezcool kernel: [<ffffffffa001cbfb>] show_product+0x2b/0x60 [usbcore]
Oct 31 14:16:46 ezcool kernel: [<ffffffff8132cc90>] dev_attr_show+0x20/0x60
Oct 31 14:16:46 ezcool kernel: [<ffffffff8112146e>] ? __get_free_pages+0xe/0x50
Oct 31 14:16:46 ezcool kernel: [<ffffffff811ef969>] sysfs_read_file+0xa9/0x190
Oct 31 14:16:46 ezcool kernel: [<ffffffff8117f785>] vfs_read+0xa5/0x180
Oct 31 14:16:46 ezcool kernel: [<ffffffff8117f8aa>] sys_read+0x4a/0xa0
Oct 31 14:16:46 ezcool kernel: [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
Any ideas? -
Satellite A series does not start up after BIOS update
After bios update with downloaded utility my notebook does not start up.
Did this case covered by warranty?Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
PS: Did you try this workaround:
- remove battery, disconnect the AC adaptor
- wait ~ 40min
- connect both devices again and try to power up the notebook -
ITunes not starting up after update, errors showing
I recently received an updated iTunes and I'm getting two errors from previous issues.
I have tried every single step with uninstalling, then reinstalling the program. As well as removing a previous issue that has happened before to no avail.
Can this issue be fixed with the updates?
I'm on Windows XP without a iPod Touchok THANKS so much!!
it now works!!
First I removed iTunes.app from my system using these instructions: http://www.tekrevue.com/tip/uninstall-itunes/
Next I opened the App Store and it showed me iTunes under "Updates".
I reinstalled iTunes via the App Store and now I can launch iTunes as expected.
Because I didn't delete the iTunes folder inside my user's folder, all my content remained.
thanks to you :
uwe eberhard -
X does not start automatically after xorg update (1.16)
Hello,
Yesterday after a system update and a reboot, my screen stayed desperatly black. Then I logged in to a console as root and started X by doing:
systemctl isolate multi-user.target
systemctl isolate graphical.target
This means root can start X. So I created the file /etc/X11/Xwrapper.config:
allowed_users = anybody
needs_root_rights = yes
but no change. I'm using the Intel GPU (xf86-video-intel driver).
Any idea?
Last edited by zorggy (2014-07-30 06:50:46)Oops, I did not search enough in the journal. Here is what looks like a bug:
Jul 30 10:12:09 xxx kernel: ------------[ cut here ]------------
Jul 30 10:12:09 xxx kernel: WARNING: CPU: 2 PID: 343 at drivers/gpu/drm/i915/intel_display.c:860 intel_wait_for_pipe_off+0x1a6/0x1b0 [i915]()
Jul 30 10:12:09 xxx kernel: pipe_off wait timed out
Jul 30 10:12:09 xxx kernel: Modules linked in: hid_generic snd_usb_audio usbhid snd_usbmidi_lib snd_rawmidi hid snd_seq_device tpm_infineon ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 coretemp hwmon xt_conntrack nf_conntrack iptable_filter ip_tables
Jul 30 10:12:09 xxx kernel: nfs lockd sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif crct10dif_common cdrom atkbd libps2 ahci libahci libata ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio
Jul 30 10:12:09 xxx kernel: CPU: 2 PID: 343 Comm: Xorg.bin Not tainted 3.15.7-1-ARCH #1
Jul 30 10:12:09 xxx kernel: Hardware name: Hewlett-Packard HP Compaq Elite 8300 CMT/3396, BIOS K01 v02.05 05/07/2012
Jul 30 10:12:09 xxx kernel: 0000000000000000 00000000900babe8 ffff880211fafa38 ffffffff8150880e
Jul 30 10:12:09 xxx kernel: ffff880211fafa80 ffff880211fafa70 ffffffff81069b2d ffff88020f0ac000
Jul 30 10:12:09 xxx kernel: 0000000000070008 00000000fffea31e 0000000000000000 ffff88020d530b48
Jul 30 10:12:09 xxx kernel: Call Trace:
Jul 30 10:12:09 xxx kernel: [<ffffffff8150880e>] dump_stack+0x4d/0x6f
Jul 30 10:12:09 xxx kernel: [<ffffffff81069b2d>] warn_slowpath_common+0x7d/0xa0
Jul 30 10:12:09 xxx kernel: [<ffffffff81069bac>] warn_slowpath_fmt+0x5c/0x80
Jul 30 10:12:09 xxx kernel: [<ffffffffa06e64b6>] intel_wait_for_pipe_off+0x1a6/0x1b0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06e656b>] intel_disable_pipe+0xab/0xc0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06e7814>] ironlake_crtc_disable+0xe4/0xa00 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06eeac7>] __intel_set_mode+0x287/0x16b0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffff81077bc4>] ? mod_timer+0x114/0x250
Jul 30 10:12:09 xxx kernel: [<ffffffffa06f2686>] intel_set_mode+0x16/0x30 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06f3740>] intel_crtc_set_config+0xa90/0xde0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa05dbe71>] drm_mode_set_config_internal+0x61/0xf0 [drm]
Jul 30 10:12:09 xxx kernel: [<ffffffffa05df40b>] drm_mode_setcrtc+0x2ab/0x620 [drm]
Jul 30 10:12:09 xxx kernel: [<ffffffffa05cfb9f>] drm_ioctl+0x1df/0x680 [drm]
Jul 30 10:12:09 xxx kernel: [<ffffffff811c7b10>] do_vfs_ioctl+0x2d0/0x4b0
Jul 30 10:12:09 xxx kernel: [<ffffffff811d221e>] ? __fget+0x6e/0xb0
Jul 30 10:12:09 xxx kernel: [<ffffffff811c7d71>] SyS_ioctl+0x81/0xa0
Jul 30 10:12:09 xxx kernel: [<ffffffff815165a9>] system_call_fastpath+0x16/0x1b
Jul 30 10:12:09 xxx kernel: ---[ end trace 614c784f88b552da ]---
I have another computer running the same driver which succeeded the xorg update. So now I don't know what to do. Re-installing the driver? What package is it exactly? -
Help! Trackpad gestures are not working properly after Yosemite update
So yesterday I updated my MBA to Yosemite. And since then I'm facing severe problems with my trackpad. Scroll and click gesture works as usual, but the other gestures suddenly stops working. I even checked my trackpad settings, but couldn't find any setting issues there. They won't just respond to any. Is it just me or everyone is facing such issues.
worse than that, my MacBook Pro FREEZES when using 4 finger swipe on the built-in trackpad for App Expose after upgrade to 10.10.1
Before 10.10.1 everything was working fine. Now, about one third of the time I use the 4 finger swipe the computer is dead (apparently mostly when using Numbers). I can still use the mouse but no response to clicks, keyboard, trackpad, or screaming out loud. All I can do is turn it off!
This (in combination with Mail issues) is so bad that for the first time since using Mac I start thinking going back to PC... -
Mac will not START UP after software update. Help?
I just updated my 24" iMac to Snow Leopard and also put on the new iLife package. Everything was working fine, Then i tried to get onto the internet using my Bigpond wifi (usb stick) the software started fine and connected to the internet, but in safari no web page would load. so i clicked on the update software/firmware option for the bigpond wifi usb stick and after several minutes realised everything had frozen. nothing would respond.i held the power button down, it shut down. Now it will not power up. just sitting at the first white screen with the apple and rotating line dial. I have tried all of the stup options recommended iner manual and removed/replaced te ram. still no fix.. Can someone please help?
Try starting the Mac with the original DVD that came with the computer, then run disk utility and repair the hard drive also repair permissions. http://support.apple.com/kb/HT1782
-
My iMac not starting/logging after yosemite upgrade
After my yosemite upgrade, got a problem starting up and logging up my iMac. Applecare advisers seems not able to help after all checks have been done. Now i have a 8month old iMac idle. Please help
Hi,
In addition to Linc's suggestion can you check the Apple Icon Menu top left and the "About this Mac" pane ?
In the Overview tab the last thing in the list of items is the Mac's Serial number.
Does this show up for you ?
You do not have to post the Number and if you use a Pic alter it to be unreadable in a Graphics app first.
8:26 pm Monday; November 17, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
My Mac just updated to 10.10.1. Now iTunes won't display on screen. I can play songs by hitting the play key. If as I am typing this I click on the iTunes icon the tool bar does not show up at top for iTunes, but the tool bar will show up if I shut down safari. How do I get my iTunes app back?
iMac 2.7GHz i5 8gb 1600mHz DDR3OPPS!! Figured it out still had second monitor cord in, and thus was it displaying on the monitor that wasn't on. Duh
-
Device not recognized in iTunes for Windows
I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about possibly losing my pictures, video, text messages and music.
Windows XP user.
Any help will be greatly appreciated.
iPhone 4, iOS 5.1.1If might be helpful if you actually told us what the problem is.
-
Itunes not working after Yosemite update
Hi folks, as for title.
I updated this morning to Yosemite OS X and everything was nice and dandy until I tried starting iTunes clicking on the icon in the dock..
Big surprise, nothing happens. Tried the usual stuff, permission repair, look into logs, re-install a fresh download all to no aval.
Clicking on the app doesn't get even a blip however, browsing into the .app bundle and clicking directly on the binary works.
Could anybody shed some light here?
Thanks and regards
/PI found another thread on the same that didn't appear when I first searched the forum.
iTunes doesn't open after Yosemite is installed
Let's continue there the quest for a solution -
Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.
Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/ -
TS1538 This is useless - it all started happening after I updated to the latest version of iTunes
Device not recognized in iTunes for Windows
I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about possibly losing my pictures, video, text messages and music.
Windows XP user.
Any help will be greatly appreciated.If might be helpful if you actually told us what the problem is.
Maybe you are looking for
-
Stacked BarChart with drag and drop
Hi, I have a BarChart with a stacked BarSet that can be drag and dropped. The problem is that when I click on a BarSeries in the chart to initiate a drag, only that BarSeries is being visually dragged. I would like to visually drag all the BarSeries
-
Seeking another pair of eyes - MSI H77MA-G43 + i5 2500K
Hello everyone, I have read the CPU compatibility sticky and I think I have come to a conclusion but I wanted to run it past a larger group. I have a MSI H77MA-G43 that won't POST (sits in a power cycle "infinite loop") and I *believe* it is possible
-
Unable to connect to NIOPCServers
I have Lookout 6.5 installed with the Integrator license. I have configured the NIOPCServer to communicate to an Allen Bradley PLC. I can open the NI OPC Quick Client and see live data from the PLC. However, I am unable to connect to the NIOPCServ
-
Disable file deletion confirmation in Lion
How do I do this?
-
I have a page that lists all of the rows in a particular table initially sorted by an integer key thanks to an ORDER BY clause in the VO query. If a user modifies the integer key of a row, the row should move to its appropriate position within the li