ITunes not using all speakers (4 surround and a woofer)
iTunes will not play music on all speakers. I know at one time it did, but it's like it does it when it wants to. Even if the song doesn't have surround or anything, I'd like it to play from all speakers. ***?
Not an expert in this, I don't have surround speakers.
Go into Quicktime settings and verify it is set to use surround instead of stereo.
Similar Messages
-
HELP: Premiere Pro CC not using all CPU and RAM during rendering and export
Hello,
I am using Premiere Pro CC on a Windows 7. My timeline is quite simple with two videos, one with the movie (mpeg) and the other with the subtitles (avi).
When I render the sequence in PP or export, the rendering time is way too slow and it only uses around 15-20% of the CPU and 3 GB of RAM.
My hardware config is :
- CPU : i7-4770k 3.50Ghz
- RAM : 8 GB
- Disk : 2 x 3 TB SATA (no raid)
RAM is not the bottleneck, neither the disk access.
I have tried rendering and exporting the same project on an iMac (with an i5 2.7 Ghz and 4 GB RAM and only 1 disk) and the result is 4x faster !!!
The CPU usage is close to 100% as well as RAM usage.
So how come PP uses all resources availble on an iMac and not on a Windows 7 ?
Is there any known bug or software bottleneck on Windows 7 ?
My machine is brand new and nothing much installed besides Adobe products.
Any help is very much appreciated.
Thanks,I just rendered out a a 2 minute sequence with about 100 clips in it and Colorista effects on everything to the Vimeo 1080 H264 preset. It took about 5 minutes to render straight from Premiere, it used all the recourses it could, my CPU was running at near %100, same with my ram and GPU, I was happy.
Then I did another render with Red Giant Denoiser and it now wants to take 30 mins and it is only using about %20 of the recourses available. My problem isn't that its taking longer with Denoiser but that its not using all of my computers CPU and GPU.
Im rendering at maximum render quality and bit dept to H264 (Im happy to wait the extra time), if I try to use VRB 2 it encodes 1 pass at a time and wants to take up to 40 minutes.
I would appreciate some advice on this.
Premiere Pro CC 2013
2.6 GHz Intel Core i7
NVIDIA GeForce GT 750M 2048 MB (CUDA GPU enabled in Premiere)
16 GB 1600 MHz DDR3
OS X 10.9.4 (13E28) -
i have an ipod 4 can i connect to pc and, using itunes match, store all music off ipod and then transfer to a new ipod 5?
hI, bella
I also met this issue a few days ago and I finally find out how to transfer music from iPod to computer:
1. Plug your iPod in and wait for the computer to recognize it.
2. Open up 'My Computer' and under 'Devices With Removable Storage', double click and open apple iPod.
3. Click on 'Tools' at the top of the window and drag down to 'Folder Options'.
4. Under the 'View' tab, find the subfolder called 'Hidden files and folders'.
5. Select the option 'Show hidden files and folders'.
6. Click 'OK'. -
Having already established 2 apple ID's. I want to change the ID listed on my iphone. Placing the new, ID on my phone it will not accept it.
Do you not use the same Apple ID and password as you would use for your IPHONE, EMAIL and ITUNES?Where/how are you trying to replace it and what happens ? You should be able to log out of the currently logged in account for the stores by tapping on it in Settings > iTunes & App Store and you should then be able to log in with a different account, and for icloud email via Settings > Mail, Contacts, Calendars to delete and then add an account.
-
I dropped my iPad mini on the floor, but it was not at all a big drop and landed firmly but the lightning cable inside my iPad cracked and from now on I have been using my sisters iPad charger(the same as old one) and now it take 4 hours to charge 8% HELP!!
It sounds like the drop damage more then just the lightning adapter.
I suggest you take it to Apple and ask them to check it out for you.
Allan -
how do i transfer my itunes account (with all my music, photos and ipad apps) from a macbook pro to a new macbook air?
thanks but exactly how do I do this. I tried setting the new macair up using migration assistant but for some reason not everything has come through. I bought a thunderbolt cable to improve the transfer rate.
Now my question is how do I transfer the iTunes folder. I have authorised the new macair for iTunes and am within the 5 computer limit. -
I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?
Madmonkey,
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Gaylefromnewhope,
Seems like you tried this all ready and it didn't help.
Next might be to reset all settings.
Settings > General > Reset > Reset all Settings
Note that when you do this you will not lose data but you will have to enter all passwords again.
If that doesn't help you might tries a restore of your iPad using iTunes on the computer you normall sync with. Do a backup and save all data first. Or
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
Hi, I need to sync my phone to our home laptop. Phone was synced to a Mac that I no longer have access to. Can I sync my phone to the home laptop (MacBook Pro) and not lose all of my photos and contacts??
Hi Michela27,
Thanks for visiting Apple Support Communities.
If you have content on your iPhone that isn't on your computer, the best thing is to use the advice in this article to transfer it to your new computer before setting up sync:
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/HT1209
Cheers,
Jeremy -
My IPhoto library will not sync all my photo's and videos to my IPhone 4
My IPhoto library will not sync all my photo's and videos to my IPhone 4. It comes up well short every time. After syncing, I get a message, "example 1171 photo's could not be synced, please see Itunes for help". I have lots of space/gb on my Iphone, so I'm confused. I've done a factory reset and done all the usual stuff, but to no avail. My Iphone is a 32gb IPhone 4, my IMAC is OS10.6.8 and my IPhoto is IPhoto 08. I appologise in advance if i'm posting in the wrong place, so please no nasty trolls. I just need good, honest, kindly advice and a solution to this. I use my IPhone as a further external backup for my photo's
Kindest regards
PaulGo to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD -
Premiere Pro CC not using all resources... 4k
I just put together a new workstation machine for editing 1D-C 4k files in Premiere Pro and After Effects.
Specs...
i7 3770 3.4
Gigabyte Z77 Mobo
32gb Corsair Vengance DDR3 1600 RAM
250gb Samsung SSD
4x 2TB Seagate 7200 HDDs in RAID 0 (Yes I know it isn't backed up, we have that part covered)
Nvidia Quadro K4000 (3gb vram)
Anyway, we transfered a project with all the media files to our RAID media drive.
It opened up very quickly and loaded all the media much faster then our old workstation.
Then I hit the spacebar (perview) and the problems started..
It won't play back smoothly at all,
AND it is only running the CPU at 10-20%, GPU 10-50%, ram at 25% and it is not really taxing the drives very hard either...
Why won't PP use all the resources at 100% like I have previously seen it do on other machines?
** The project we are trying to play is 2 layers of 4k .MOV footage in a 1080 timeline... with sharpening, Fast color corrector, and RGB curves.
** It also drops every fourth frame when playing back just one layer of 4k .mov footage in a 1080 timeline with NO Effects applied. (Much smoother, but still not using all resources)
What I am asking, is why would it be giving up so quickly? Before even taxing the resources very hard?I too have a recent 1D-C project I'm editing. That 1D-C is something, yes? Most filmic images I've ever seen from a DSLR. But I digress.
I'm following a workflow closer to the one used by Philip Bloom and Shane Hurlbut. The Motion Jpeg files will not play well at all on your system. It's strictly a capture medium - not an editing one.
I converted all my 1D-C files to Prores 422 at 4K size using Mpeg Streamclip. Those files imported beautifully and edit well on my Retina Macbook Pro laptop. I usually set playback to 1/2 quality, ps.
I have had problems using CUDA, so I'm sticking to software mode. But I don't see any problem with being able to cut my film and finish on my computer.
Also - my sequence is a 4K sequence right in Premiere. I simply chose a clip and "made a sequence" from that. Why scale when I don't have to? I've exported to 1080p easily from the sequence.
If anyone finds this workflow less than ideal, I'm all ears. Thanks. -
Itunes not copying all photos from an event on my iMac to iPad
why is iTunes not copying all photos from an event on my iMac to iPad
Not at this time. There is no connection between iPhoto on the Mac and on the iPad
Maybe in a future release
Suggest to Apple. IPhoto menu =>> provide iPhoto feedback
LN -
SAP job not using all dialog processes that are available for parallel processing
He Experts,
The customer is running a job which is not using all the dialog processes that are available for parallel processing. It appears to use up the parallel processes (60) for the first 4-5 minutes of the job and then maxes out about 3-5 processes for the remainder of the job.
How do I analyze the job to find out the issue from a Basis perspective?
Thanks,
ZahraHi Daniel,
Thanks for replying!
I don't believe its a standard job.
I was thinking of starting a trace using ST05 before the job. What do you think?
Thanks,
Zahra -
I need to permanently, FOREVER, stop Firefox from telling me I have not used it in a while and prompting me to reset it. I have 100s of PCs that are frozen and as far as Firefox is concerned they ARE ALWAYS in need of being reset. This must go away. When Firefox starts on these PCs it MUST NEVER ask a question or prompt the user for anything EVER. All the decisions have already been made for the user and that MUST NOT CHANGE.
Thanks for the reply. I have heard that about the file, but I need to know how to tell Firefox that I don't care about when it was last used etc. I can delete the file, but it will come back. So the real answer I need is how to tell Firefox "not to check" when it was last used in the first place, not what file contains that information.
For now I will delete the file then, without starting Firefox I will freeze it and hope that will work. But Firefox needs a way that I can just tell it to not care.
Thanks again for help,
Ralph -
MBP not using all memory while rendering video
Hey,
When I do rendering in Adobe Premiere Por CS6, my Mac is not using all the available RAM: 2773 MB used....5416 MB free
Memory Pages:
1658 MB active....1099 MB wired
5420 MB inactive....11.2 MB free
it also says that: 3 swap files at peak usage
256 MB total swap space (20 MB used)
350 GB free storage space( total 750 GB)
I have a MBP (OS x Lion) late 2011 with i7 2.8 GHz and 8 GB RAM
Adobe Premiere Pro is set to use 6.5 GB of RAM but not even while working in the programme it has ever used that much of memory.
During rendering, it is the only app running, except for Google Chrome.
If this info is not enough, just ask what do you need to know...
PLEASE HELP, rendering takes forever.
Thanks,
kundYou never said what model Mac you have. Since this is the MacBook Pro forum, I assume you have some version of the MBP. 390% CPU would indicate CPU-boundedness for a quad-core CPU without active hyperthreading, or a dual-core CPU with hyperthreading active.
Given the high CPU usage and the low swap usage, it seems unlikely that memory usage is the problem, but I'm not a Premiere Pro user, so I couldn't guess what it.
You might try posting your question in an Adobe forum for Premiere Pro. -
System not using all avail. mem.
Hi all, did a lot of forum searching and haven't seen this topic.
I'm using PPCS5(in production Premium) While rendering, the program is not using all available memory. before I go on here is the system I am using:
Win7pro
EVGA X58FTW mobo
I7 970
6x4gig Kingston hyperX 1600 RAM
Quadro fx4000
WD 140gig Raptor sys. drive
2x1TB RAID 0 (3gig SATA) data
2x2TB RAID 0 (6gig SATA) data
see image:
I have 21gigs allocated to the program.
Is the bottleneck the cache memory?
This is what I'm outputting:
Thanks for looking.Bob Sackter wrote:
I am encoding H.264 640x360
Source is 1920x1080p60 HDV 8 sources, With a timecode window
bitrate set at 2.0 1 pass VBR
I'm making a multicam reference.
There is a little contradiction in the information here, HDV is 1440 x 1080 i60 or possible p30 I do not know of any camera that is 60p
Maybe you are looking for
-
I have to write a shl to ftp a file from a directory to UNIX, the problem is that the file not always have the same name in the server: \\OCELOT\VOL1\ORGS\FINANCIAL AID\CSS\0910 Data\loaded idocs\3526_331322.dat> The filenames are, for example, 3526_
-
Hi I have a requirement to send an Email from webdynpro application on action of submit button, and the email should contain two buttons APPROVE & REJECT. This email is sent to the approver, depending on button selection the email is triggered back t
-
My touchpad is not working sometimes
sometime my touch pad is not working i updated dirver also no use. and my computer in warranty period my smart center also showing error for last four months.
-
I am using Dreamweaver cs6 fluid grid layout. Is there a way to change the text size for the different layouts? For example I would like the header text to be 16px on the desktop but only 12px on the mobile. Thank you!
-
Fastest way to search large list
User will enter their account number into a web page. I then get a list from my database (will be about 100,000+ entries), and search to see if the account number is present, and forward to a new web page based on the results of the search. Any thoug