Itunes Not working after installing 7.0 then reinstalling 6.0

As i read on , i am realizing that many XP users are having the same problems as I am. I did update to version 7.0, but it would not install (after trying various registry chanages) so after many attempts have reinstalled 6.0 . Now when itunes starts up the window opens but won't do anything (the window is frozen)
I have uninstalled and tryed to reinstall and still have the same problem.
Any help would be appreciated.
thanks
Gateway Windows XP

they are black...no scroll bar
you've got a broken QuickTime. i noted that you posted recently in a thread on the -200 saying that "you had the same problem". if you really were getting a -200 with your 7.0.x, that's caused by a broken QuickTime too.
let's try this first.
head into your Add/Remove programs, and uninstall QuickTime.
then we'll manually remove any leftover QuickTime program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
once we've got all the existing QuickTime scraped away, let's try a careful standalone QT 7.1.3 reinstall.
download and save a copy of the QT 7.1.3 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1.3 Installers … get the one that doesn’t mention itunes
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

Similar Messages

ITunes not working after installing Mavericks

I cannot open i.tunes after installing Mavericks. I cannot unistalled it either (to reinstall it) since a window appears saying it cannot be dropped or changed in any way. Thank you for your help.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | sed -n '1d; /:$/{s/ *:$//;x;s/\n//p;}; /V.*[(]/{s/^[^(]*/ /;H;}; /Apple/{s/.//g;h;}'`; Pm "USB"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that takes administrator privileges.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Outlook and iTunes not work after install iCloud

when i install iCloud not work Outllok and iTunes, if i unistall iCloud this programn work normaly

See this discussion :) https://discussions.apple.com/thread/3540759?start=15&tstart=0

Syncing my iCal calendars in iTunes - Not working after installing Leopard

* I have tried researching this as much as possible before posting this, so I apologize if a solution has already been posted for this issue!
After recently installing Leopard, I have noticed that when I try to sync my iCal calendars to my (5th generation) iPod (using iTunes) that the only calendars showing up as available to sync with are "Home" and "Work". I do not have a "home" or "work" calendar in my iCal. In fact all of my calendars in iCal appear to be working fine, however, I am unable to see any of them when I go to my iTunes to sync them to my iPod. I tried syncing my iPod with the "Home" and "work" calendars, but they are empty. I used to be able to sync with no problem whatsoever. Anyone have any ideas? Thanks a lot for any helpful advise!

JHeinz,
Glad to hear that contacts are working again.
Other troubleshooting steps involve refreshing the iTunes and iCal plist files.
1. Quit iTunes and find the com.apple.iTunes.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Drag the file to your Desktop, log out/in or restart and check iTunes for expected behavior.
2. Quit iCal and find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Additionally find the Calendar Cache file in your Macintosh HD/Users/yourusername/Library/Calendars folder. Drag both of these files to your Desktop, log out/in or restart and check for desired behavior.
I listed these as separate steps to keep from changing too many things at one time. If you are dissatisfied with the results you can always return the original plist files to their original locations.
;~)

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Internet not working after installing "StarTech Thunderbolt Docking Station" driver

My Internet is not working after installing "StarTech Thunderbolt Docking Station" driver although "Ethernet" and "wireless" say they're connected, still there is no internet.
I have bought a "StarTech Thunderbolt Docking Station" as I need to use 2 thunderbolt based pieces of equipment on my "MacBook Pro"; which are a 2nd monitor as well as a Thunderbolt driven Audio Interface.
When I first plugged all my equipment to the "StarTech Thunderbolt Docking Station" everything was working fine, all pieces of equipment worked as well as Ethernet from both the computer and the docking station were working perfectly.
However, when I inserted the "StarTech Thunderbolt Docking Station driver CD" and installed the drivers, the internet on my computer has stopped working. Although the Ethernet says it is "connected" (same goes for "Thunderbolt Ethernet" when cable is connected to it) still the internet does not work. Even my wireless internet is not working anymore. Furthermore, also after installing the Docking Station drivers, my iTunes is crashing whenever started.
Please help, this is really urgent.
I've been looking for answers all around but can't seem to find any.
I'm using OSX Mavericks 10.9.2
I've tried fixing stuff with Network preferences, like changing IP address, renewing DHCP leace.
I also tried typing IP address, Subnet Mask, Router and DNS Sever manually... Nothing seems to be working.
Note: I know someone could suggest to "uninstall" the Thunderbolt Station driver, however, I can't find an "uninstallation file", even the CD that came with the docking station does not have it.

I had exactly the same problem today, and I was lucky enough to solve it.
Here's what helped me:
First, I found a hint to Suspicious Package in this thread.
With Suspicious Package installed, I was able to identify the script in StarTech's installer pkg. It' called "postflight".
Amongst other things, postflight runs this command:
sudo mv usr/share/sandbox/mDNSResponder.sb usr/share/sandbox/_mDNSResponder.sb
A quick check in Apple's knowledge base revealed, that the mDNSResponder is essential to use DNS (i.e. to resolve server names like www.apple.com) and bonjour.
I moved th mDNSResponder back to where it belongs:
sudo mv usr/share/sandbox/_mDNSResponder.sb usr/share/sandbox/mDNSResponder.sb
After a reboot, everything worked fine again.
I have no idea, why StarTeck disables an essential tool. Let's assume it's an error ...
But after this experience, I didn't want the StarTech ethernet driver on my machine (I had installed it just for curiosity, anyway - yes, I know, I shouldn't have ...), so I removed the kext the installer had copied to my system:
sudo mv /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8 2580.kext /Users/myusername
(You see I didn't delete the kext directly, I just moved it away and tried another reboot. Now everything works fine, so I'm going to delete the kext entirely and paint a big red cross on StarTech's installer disk.
Hope this helps.

Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

HT201366 CAC readers not working after installing security update 2013-003?

Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

For CAC issues, see:
MilitaryCAC's Mac OS X support landing page
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

HT4623 my phone main button not working after installed new version software 7.0.6

my phone main button not working after installed new version software 7.0.6

Arrange some liquid like petrol spirit and w 40
two drops in to home button.
30 times press slowly slowly and then restart your apply iphone.
You will get ready.
I am sure. Thanking you...

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

Not working after install

macbook pro not working after install OS Mountain Lion

Hey kennichols,
Thanks for the question. Based on the information you provided, the following resources may help to resolve your issue:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Thanks,
Matt M.

Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
The system shows everything is ok.
Please any help greatly apreaciated.
Thank you
Valentin

ValentinT, welcome to the forum.
There are no drivers available for Windows 8. I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected. It seems that the Sound is one area that gets changed when updating to Win 8.1. At least, this is what happened to me.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"
provide solution.

Well I didn't enter a hostname from my ISP, but I did need to enter as a Host Domain the sub-domain (CNAME) that we use for our server. Don't know all the proper terminology, but I hope that's clear enough to someone to help. As soon as I did that, it worked again.
Thanks for the tip,
W

Macbook air builtin webcam not working after installing Mountain Lion

camera is not working after installing Mountain Lion

This did not resolved my problem. Camera green light glows but facetime still deos not work. Also
tried with different users and different applications. Not working

My itunes not working after it tried to download the new version. it keep giving error 7

my Itunes not working after it tried to download the new version. it give me message: erro 7 or window error 193. need help. thank

What worked for me was to uninstall from the control panel in this order: Thanks to another post on this board... this worked... link to the discussion here: https://discussions.apple.com/thread/5817584?tstart=0
ITunes
Apple Software Update
Apple Mobile Support
Bonjour
Apple Application Support
I had problems uninstalling Apple Mobile Support, I had to repair it first before I could uninstall it. You will have to restart the computer after all the uninstalls, and before reinstalling ITunes. I reinstalled ITunes from the Apple website afterwards (fresh download) ... everything works for me now that I have done this.

Itunes Not working after installing 7.0 then reinstalling 6.0

Similar Messages

Maybe you are looking for