Itunes not working when nano plugged in

Hi, I'm pretty sure I did something wrong... I unplugged my nano from my pc without ejecting because I didn't want it to auto sync. Now when I plug it back in, it won't open itunes. If I manually open itunes, it stays frozen. But itunes seems to work fine when nano is not plugged in. This all happened because I got a new pc and was trying to figure out how to get around the auto sync... Help!

The model=auto option was actually the only thing i found on the internet that looked related and/or promising so i already tried that.
Sadly, it didn't help.
Even if you mute the PCM channel ?
There's no such option for my PCM channel. Can't mute it.
It might be unrelated, but something that struck me as strange is the that there's no more volume support by my acpi-module.
> c /proc/acpi/ibm/volume
level: unsupported
mute: off
Before 2.6.33 thinkpad-acpi has always been able to control the volume. However that might just be because tpacpi is switching its interface more and more to /sys instead of /proc.
Any more ideas?
Last edited by demian (2010-05-12 12:18:20)

Similar Messages

  • Itunes not working when i plug ipod in

    I have resetted a ipod classic to the original settings and it will not connect to itunes on my windows 7 computer. A message comes up that says itunes not working and closes it down. What do I need to do to get it back and running so I can put music on it?

    i believe you are using an apple device for the first time
    once you connect your device to the computer, on the left handside in centre of itunes your device will appear
    if you dont know how to add songs and other stuff, just look for it on youtube which will be easy to follow

  • Itunes Stops Working When Nano Plugged In

    Good evening everyone...
    Here's an interesting problem. Running 7.5.0.20 on Fisher Price Operating System (Vista). Up until tonight, all is well. Now, when I plug in either of my two Nanos (current and one generation back), Itunes immediately stops working. I also have two shuffles but they connect and disconnect to/from Itunes fine. Any ideas? From the user friendly web pages of Apple, trying to get this solved through them appears to be a challenge.
    Chuck K.
    Bel Air, MD

    when I look at the error report it says something about APPCRASH
    Could you paste a copy of the contents of one of those problem reports here for us to have a look at please, Tony?

  • My iphone is not working when i plug off from charger.

    My iphone is not working when i plug off from charger. Evenmore when it is on the charger and it still not working, it asks to connect to i-tunes but i can't and i can see only emergency calls. What should i do?

    If it only works when connected to a charger, that would indicate a battery issue.
    As for the other issue... do as it suggests and connect to iTunes then restore.  There is no logical, intelligent expectation that anything on the device can be accessed as long as the "Connect to iTunes" screen is displaying.

  • Keep getting "itunes not working"  when trying to sync my music to my iphone4

    keep getting "itunes not working"  when trying to sync my music to my iphone4

    Just a basic gateway computer from futureshop(bestbuy) I get that message about half way through the sync then it closes iTunes?

  • My iphone text tone is not working when I plug in the earphone.

    Hi,
    My iphone text tone is not working when I plug in the earphone.
    My earphone is always plug into the iphone as I use it to answer calls. I notice that iphone does not alert me (sound) when there is a new messages. Instead the text sound is transfer to the earphone speaker.
    As the earphone is plug into the iphone and I am not putting it on always, I need it to still hear the text tone whenever I received new messages.
    Anyone pls help.. the problem still there even I updated..

    goh steven wrote:
    hi wjosten
    I don't put the iphone in my front pocket. I put in my bag pack so vibration is not useful to me. Pls help
    The iPhone is working exactly as it is designed.
    Your options are:
    1) Unplug the headset.
    2) Leave the headset plugged in and the earpiece in your ear at all times.
    3) Turn on vibrate and put the phone in your pocket.
    4) Leave feedback for Apple and hope they deem it worthy of their time to fix.
    This is a user to user forum, these are the only solutions we can offer you here.

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • I have a MacBook Pro which has a SSD replacing the superdrive. I have bought an Apple USB superdrive but It's not working when I plug it in?

    i have a MacBook Pro which has a SSD replacing the superdrive. I have bought an Apple USB superdrive but It's not working when I plug it in? Is it broken or do I need to download something to make it work?

    System Requirements
    MacBook Pro with Retina display
    MacBook Air computer
    Mac mini computer

  • Built-In Mic not working when Headphones plugged in?

    I'm currently using the 13 inch Macbook Pro with the latest software. I noticed just today that the built-in microphone that comes with the laptop will not work when I plug in my headphones. However, as soon as I remove them, they resume working.
    Does anyone have a solution to this?

    Use headphones that also have a microphone.

  • Jack of the eyer phone is not working when i plug my eyer phones one is working other is not

    Hey sir ,
    My name is Bhushan Tiwari using Apple from 5 year and in my 5 Year of carrier an iphone problem has been arrived. my head phone jack is not working when i plug my eyer phones in my iphone so one works and other does not work please provide me the solution i will be very thankfull to you ...
    Thanking your ,
    BHUSHAN TIWARI

    Try the stamdard fixes to rule out a software problem:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones again on my IPod touch?

    My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones with my IPod touch?

    You likely have a problem with the headphone jack.  You jhave to ways to listen to music via headphones:
    - Get the jack fixed.  Here is one place:
    DigiExpress.us - The iPad Repair Professionals
    However first I wold rule out a software problem by try the following:
    Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factory defaults.
    The other way is to use bluetooth headhone if you have a 2G or later iPod.

  • Itunes not working when trying to sync ipad and iphone 4

    Hello I have been having a number of issues with itunes not working. When I try to sync my ipad or iphone 4 itunes locks up does not see my devices connected I have to reboot 5 times before I can get them to be seen in itunes. Also when I am able to get itunes to see my ipad it will lock up at backing up ipad. I have removed everything apple and reinstalled and same issue. I am running windows vista 64 bit I don't remember having this problem until the new itunes came out and after I got my iphone 4. Any one have any ideas on how to fix this.

    Hi there, we also have this problem, have had it for months now! have tried various 'fixes'advised by apple. the last error messege that came up was could not connect to itunes because of unknown error - (oxE8000065) help anybody!!! im jsut waiting for iphone 4 to arrive, i am wondering how thats going to go on, i have doupts! thanks for help D

  • ITunes not responding when I plug in my iPod

    Hey all, I need some help. Recently when I plug my iPod into my PC to update my iPod with the new music that I have loaded into iTunes, as soon as I do iTunes stops working and when I checked in my windows task manager under appplications/status it says iTunes is not responding. when my iPod is not plugged in, iTunes works fine. I can't get past this. Yes I did load the updated software, it didn't help. Does anyone have any suggestions?
    Thanks,
    Todd

    This is also happening to me updated latest version of Itunes. Itunes works fine but doesn't show the ipod when I attach. Tried most of the hints on the web site but nothing is working. Plugged the ipod into my base station and hey presto it works fine. I have also tried top re load the ipod software on the lap top but this isn't working either it asks for the ipod to be plugged in when it is plugged in it doesn't see it. Yet in windows explorer you can see the ipod is connected. Any idea's anyone. Shall i try to install version 6.0.0 of itunes instead of the latest version ?

  • ITunes stops working when I plug in my iPod touch!

    My itunes will work fine when my ipod touch isn't plugged in. When i do plug my ipoD in iTunes will immediatly pop up with "iTunes has stopped working" when I look at the error report it says something about APPCRASH.. I really don't want to sell my iPod.. And when I try to upgrade my iTunes it says something about the signature being wrong..? Please help

    when I look at the error report it says something about APPCRASH
    Could you paste a copy of the contents of one of those problem reports here for us to have a look at please, Tony?

  • ITunes stops working when i plug in my iPod

    iTunes 10 stops working as soon as I plug in my iPod Shuffle. It will work when the iPod Shuffle isn't plugged in, but as soon as I plug it in, It sais "iTunes has stopped working" And the only thing I can do is close down iTunes. Help?

    when I look at the error report it says something about APPCRASH
    Could you paste a copy of the contents of one of those problem reports here for us to have a look at please, Tony?

Maybe you are looking for

  • Does anyone know how to change the location of Library/Mobile Documents?

    Several months ago I decided to try a Solid state drive and during the process for space reasons I relocated my home folder to another internal drive.  Last week I decided to get rid of the solid state and replace it with the original 750 gig drive I

  • Appended text file in loop adds unwanted delimiter value at end of each iteration.

    I am using 'Export To Spreadsheet.vi' in a loop which saves a text file and appends data from a 1D array waveform for each iteration. My problem is that at the end of every iteration an extra delimiter value is appended to the file. When I then attem

  • MM and ASSET

    How does MM related with ASSET management ?

  • Can we change source of fx:include tag from controller class?

    Is it possible to change source of <fx:include> tag from controller class? The requirement is to dynamically change certain section of a page.

  • X11 Bug

    Has anyone else run into this problem... X11 in Leopard doesn't seem to support multiple monitors. When you take a X11 window and drag it to a second monitor, you can only get as far as the edge of your main monitor and then you cannot move it horizo