ITunes on Intel Mac

hi all,
only one problem so far with my new Intel iMac - with iTunes. i've had several instances when i click on the icon in the dock and it doesn't respond. i try to close the program from the dock, it doesn't respond. i try "force quit" and it doesn't respond. the only way to get it closed is to restart the computer. after restart i can open iTunes and it works fine.
ideas?
thanks,
fal
iMac Intel Core Duo, 20", 2GHz, 2G Mac OS X (10.4.4)

i'd trash the pref files....and boot from the install cd to repair diskpermissions, using disk utility.

Similar Messages

I stupidly upgraded the software to my Iphone 3s and now it won't connect to my Mac which is a PowerPC and the Itunes update is only for Intel Macs so......now what?

well I stupidly upgraded my Iphone 3s to 6.0.1 and now it isn't compatable with Itunes but I run a PowerPC and the itunes is only for an Intel Mac so.........now what? It's more important for me to have my Iphone communicating with my older Itunes so what older software do I need for my phone since I'm not buying an Intel Mac.My Protools would not like it.
Zootiam

Click here and install the software.
(72975)

I have intel mac 10.411, want to access iTunes, won't let me unless upgrade tp itunes 10, but it needs OSX 10.5. I just want to download some music, not upgrade my operating system. It's not THAT old. Ideas?

I have intel mac 10.411, want to access iTunes, won't let me unless upgrade tp itunes 10, but it needs OSX 10.5. I just want to download some music, not upgrade my operating system. It's not THAT old. Ideas?

As long as you don't need all the bells and whistles of the iTunes Store such as Ping, and don't need to sync an iOS device running iOS 4.x, then iTunes 9.2.1 should work for you. It should be available via Software Update, but if not, you can still get it here:
http://support.apple.com/kb/DL1056
but it would be best to upgrade your Mac to Mac OS X 10.5 or 10.6, since it's probable that eventually the iTunes Store will no longer support iTunes 9.x.
Regards.
P.S. Mac OS X 10.4 was discontinued three and a half years ago, so yes, it's getting rather long in the tooth. Cheers.

Intel Mac Mini stuck in reboot loop

I just upgraded the hard drive in my 2007 intel mac mini core duo. Drive formatted successfully, contains GUID Partition Table.
OSX 10.5 installed successfully.
Machine rebooted, I ran software update to 10.5.7 successfully.
Upon installing Adobe Flash Player, Adobe Acrobat Reader, machine began to react slowly to commands.
Rebooted machine, went to Grey Apple Screen with spinning dash wheen icon.
Machine rebooted itself, once again going to the grey apply screen with the spinning wheel.
After about 15 minutes of letting the continual reboot cycle happen, I inserted the installation DVD for 10.5, held the power button in to power off the machine, and booted from the disk.
I ran disk utility. Disk Utility shows the hard drive, shows the partition (GUID Partition) correctly.
I Verified Disk, which verified as "OK"
Repaired permissions.
Restarted machine.
Once again, it loaded to the grey apple screen, stayed there with the spinning dash wheel for about 3 minutes then continued to reboot over and over (everytime it reboots it sticks on the grey apple screen for 3 minutes before rebooting.
I once again powered off the machine and reset the PRAM.
Machine stuck again on reboot cycle.
I powered off the machine and reset the mini's SMC.
Machine is still stuck in reboot cycle.
I have also taken the mini back apart and verified that all RAM and connections are seated properly.
Any advice on what to do at this point will be very helpful.

+And I promise I will not download and install a hundred different programs this time.+
Good idea.
Any time you install software in OSX, there is a small, but finite, chance that the installation process won't be able to access a needed file because it is in use. This can mess up pre-binding, or even prevent files from being updated.
So the best advice is not to run any other programs while doing software installs or updates. And when in doubt, run DiskUtility afterwards and fix permissions one more time.
I cringe whenever I think of a post I read a while back about a Mac user who boasted about what music he likes to run in iTunes while doing system software updates. Not a good idea. It's "Russian roulette" with maybe 99 blanks in the "gun", but one real bullet that can kill your Mac's installation.

Need Advice: New Intel Mac Mini Still In The Box

Hi!
Okay.. I know... I have several posts going here as I have several issues I am trying to solve rather simultaneously. Thanks for being patient with me.
I have my old 1.25 Ghz PowerPC Mac Mini running 10.4.11 and all was well and happy. Then Security Update 2007-009 happened and all went to ....well... you know and, yes, it was bad! Went to Apple, got it running of sorts as they re-installed the OS, but they used an old version of OS X. (10.4.7. Can you believe that?) This caused other problems. It continues to have all sorts of difficulties, as I have had to get applications to re-recognize that the computer is back up to 10.4.11. Currently, I am struggling with trying to get iTunes to access it's music folders on the external hard drives. Realized that I hadn't even gotten around to figuring out whether or not some of my other applications work, like some of the games and third party, etc.
The thing is I got a new Intel Mac Mini for Christmas and it's still in the box because as I suspected I need to get my old mac perfect again before I can even think about migrating stuff over to the new Mac. But.. here's the thing... it's starting to look pretty much like 2008 will come and go before I can get the old Mac ready enough to take the new Mac out of the box. This really is rather silly!
Now... I can't get the old Mac to see the music and it made me think. I have all of my iTunes music and iPhoto backed up on an external hard drive (I used Apple's "Back-up" software to do it) and in addition to this two complete copies of the iTunes music and iPhoto photos albums on two separate external hard drives. Should I just forget using migration assistant? Can I get my music and my photo albums into the new mac directly from the external hard drives?
Or...can I use "back up" to restore the music and photos into the new Mac?
I am starting to think that the best way to get my new Mac running is not risk it by attaching it to my old Mac. What do you think?
Thank you so much for any advice or experiences you can give. -Charlotte

I know that I am vacillating back and forth as to what to do. Thanks so much for being patient with me. All of your advice is really appreciated and I am at least closing in on deciding on my strategy. Probably will follow your first response advice, especially considering that some of the third party apps may not have updates to handle Leopard quite yet. Anyway... it's a good strategy since everything is on the externals anyway.
You can say that fine.
Ha ha ha.... yes, I've been messing around with computers since my parents bought our first Apple computer back in 1979. Just like you, I've never had a serious problem with any of the computers and we've had them all, running all sorts of things from the Original Apple and Apple IIc (which my parents still have and it still runs!) to the Commodore and all the Windows permeations and then on to the Macs running Jaguar, Panther and Tiger, probably because we've always been careful with the machines and what we install in them and how we update them. I have always kept my computers on UPS' and un-plug them when storms brew outside. As it is I am still using my eight year old Windows 98 computer, (for games mostly) and it still runs quicker than most peoples windows pcs and it's only a 740 Megahertz.
I haven't had to re-install anything, especially on this lovely little Mac Mini until now and wouldn't have in this situation, had I known more. I had taken the little Mac Mini in for a Procare "Tune-Up," only four days before the big up-date disaster. Not sure what they did to my mac in the tune-up but the guy gave me back the machine assuring me that the computer was perfect with no problems in answer to my asking "were they sure?" Even after the Genius Bar techs at the Apple Store re-installed the OS to fix the big problems it seems that no one ever thought to run verify disk. Had the Genius Bar techs at the time of the tune-up done this, or at least told me to do this, the last security update would not have wrecked so much havoc. It was only after I got the machine back from Apple that second time that I found that the directory had been corrupted when I ran disk verify. Actually it is amazing that I have had this little Mac Mini for so long and so not have had any problems on it that I would be able to go so long without having to know this really pretty important aspect of keeping one's mac in good running shape. I had been running maintenance scripts and permissions verify and repair and thought that was all there was to it. Silly! You know... that really is a testimony of how nice these little machines are.
Anyway... experience is a good teacher and I have learned so much it's actually been great! This stuff is pretty interesting.
Now... on to Leopard!
Thanks so much and you have a great New Year! -Charlotte

Hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no softwar

hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated

If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing!

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

Blinking Green Light! Mount & Unmount on Intel Mac mini

Hi all.
This is my sister's iPod shuffle, lat night she plugged into her new Intel Mac mini Core Duo, and the shuffle mounts, everything appears to be in working order, she said today she still listened to it.
Just now she accidently plugged the shuffle while in our Dad's account (on the Mac mini as well), then seemed like "all well broke loose", this is what she told me, first iTunes was not responsive, colour wheel, so she restarted but only arrived at the blank desktop and only the shadow of the Top Menu Bar
I reset the iPod shuffle, was successful in plugging it in, quit iTunes (all in her own account now) and update the shuffle software.
When inside iTunes, once I started Autofill, it suddenly unmounted by itself, followed by the red exclamation error message when you accidently remove an external device unproperly.
When I tried plugging in again, it refuses to mount. Just blinking Green, or pull out again, blinking Yellow.
Now I plug it into my own iMac G5, and it mounts and is blinking slowly with yellow light, what seems to be normal charging.
Has this something got to do with the Intel Mac??
Thanks and cheers

This probably has nothing to do with the Mini, but everything to do with the Shuffle. Like all flash memory, it is susceptible to damage if unplugged at the wrong time.
For the shuffle, you cannot remove it while it is updating or in Disk Mode. This warning is presented in the User's Guide and is repeated in several other places throughout the Support pages as well.
The general rule is: If it's blinking amber, don't unplug it before you unmount it. Unmounting can be done either in iTunes or in the Finder.
About all you can do, given the symptoms you're seeing, is try to Restore it. See the instructions in the User's Guide and/or on the iPod Shuffle Support Page.

PowerMac G5 or Intel Mac Mini - Storage Server

I posted this in the Mac Mini area, but I would like to see what the G5 community has to say.
I would like to setup a server to store family pictures, iTunes purchases and other media. Also I would like to use it as a backup for important documents and data.
I have a Intel Mac Mini 1.66 and a G5 PowerMac dual 1.8GHz.
I have purchased 4 400GB drives and I am trying to figure out the best solution for the money.
I would like to put the drives into external enclosures like OWC 2 drive FW800/FW400 and use the first pair as either RAID 0 or use the hardware spanning, and the 2nd pair as the backup.
Will this be too much for the FW400 bus of the Mac Mini, seeing I also use an EyeTV 500/200 solution to capture TV and burn DVDs. I will do video editing, iMovie, iPhoto stuff.
I would like to sell the G5, but would it make more sense to install 2 drives in the G5 and use 1 external enclosure with FW800 for the backup? I would like at least 1 external enclosure for the backup?
Any suggestion would help.
Thanks!
WhoDat

I would keep the G5 as it seems more suited for a file server than the mini. Also since it will be used that way and storage is what you need, you can pick up one of these:
http://eshop.macsales.com/Search/Search.cfm?Criteria=G5%20Jive&sort=a
to mount up to 3 more dirves inside the G5 so it would hold 5 and still be a nice beastie - the mini would have to go to the external solution. Just my .02.

Syncing music from iTunes on a Mac running 10.4 To an iPad2

I have a new iPad 2 and all my music in iTunes is on my desktop Mac running an operating system 10.4.9. Is there a way I can move it my my ipad?
Thanks for any tips.

What are the specs of your Mac?
Some of the minimum requirements of iPad is 867 MHz or better PPC G4, G5 or Intel Mac running OS X 10.5.8 Leopard or greater.
New iOS mobile devices will not work under OS X 10.4.11 Tiger.
May be possible for you to upgrade to OS X 10.5 Leopard and you may need to update to a newer version of iTunes, also, if your Mac meets or exceeds these minimum requirements.
No other options for sync of iPad to iTunes on Mac.
You can purchase Leopard direct from Apple 1 800 MY APPLE.
Ask for software sales and tell them you need OS 10,5 Leopard to use with your iPad.

Intel Mac mini vs PowerMac Dual G5 storage server

I would like to setup a server to store family pictures, iTunes purchases and other media. Also I would like to use it as a backup for important documents and data.
I have a Intel Mac Mini 1.66 and a G5 PowerMac dual 1.8GHz.
I have purchased 4 400GB drives and I am trying to figure out the best solution for the money.
I would like to put the drives into external enclosures like OWC 2 drive FW800/FW400 and use the first pair as either RAID 0 or use the hardware spanning, and the 2nd pair as the backup.
Will this be too much for the FW400 bus of the Mac Mini, seeing I also use an EyeTV 500/200 solution to capture TV and burn DVDs. I will do video editing, iMovie, iPhoto stuff.
I would like to sell the G5, but would it make more sense to install 2 drives in the G5 and use 1 external enclosure with FW800 for the backup? I would like at least 1 external enclosure for the backup?
Any suggestion would help.
Thanks!

I have both of the systems to which you refer. I am typing to you on my G5 dual 2 ghz. I have an older G4 dual with 4 drives in it that I use for backup purposes, I do not use a fileserver at home in the sense of what you are talking about. My mini is my entertainment system with 1 TB of storage, my purchases are made on the G5 then transferred to the mini (giving me a backup of all purchases) and the G4 is used to back up the entire library from my mini (not as often as I should though! )
I know Wiebetech used to make an internal setup that expanded the G5's drive capacity from 2 to 4. While you said you wanted at least one external enclosure, that option would eliminate the need for an external case, another power cord, etc. so it may be worth looking into. I do not recall the name of the product but I know wiebetech manufactured it. Perhaps someone else knows the name or you could go to the company website. It is also possible in the G5 forum there is someone who owns the product as well.
As to which one to use, selling the G5 and having just a 2 drive or 4 drive enclosure hooked to the mini is most certainly a significant space saver over the G5 (not to mention not having to either have 2 separate machines with 2 monitors, keyboards or a KVM or VNC type setup) There are many good enclosures on the market, not just single but multiple drive enclosures which could be a better/smaller footprint/economical way to go vs. 4 individual enclosures (again, wiebetech is a noteworthy manufacturer of such items...no, I don't work for them
I too have eye tv hooked to the min as well as the 2 external drives I mentioned (250gb and 750gb) all via firewire. There should be no problem with the setup you mention as far as firewire is concerned and the mini. At least, not in my experience.
Good luck, let us know what you decide and feel free to ask more questions. I will gladly help if I can (can't say I helped this time, probably gave you more questions than answers!)
Message was edited by: CaptTB

Intel Mac Mini fans run full blast even when off

Hi All,
I have gone through the forums and haven't found an answer to this one. I have an Intel Mac Mini running the latest updated Tiger that I use solely for a media center.
About a week ago, the box started running fans full blast, regardless of whether it was actually turned on or not. As soon as it is plugged in the fans blast.
Otherwise, it seems healthy, and boots normally.
The steps I have taken so far include resetting permissions, verifying the disk, and resetting the SMC in the proscribed fashion.
After this occurred, I downloaded and installed smcFanControl from Lifehacker.com. This reported fan speed of zero and Temperature of zero.
Next I opened the case and insured the fan/HD cable next to the lttle battery was securely fastened as this had been reported to cause this symptom.
What's next? The device is out of warranty and honestly, I don't want to spend any money if I can help it.
Should I take it apart further and see if the other end of the fan/HD cable has somehow worked loose?
Can anyone think of another cause besides a loose cable?
What if I completely disabled the fan? The hardest thing I ever ask it to do is run iTunes and VLC.
Any advice is greatly appreciated.
Dave

I have refurbished two G5s with LCS and screaming fans (this was avery common problem with G5 LCS macs), the red light on the motherboard could mean the CPUs need to be re-seated. This red LED light appeared on my mac after I had removed the CPUs to add new thermal paste.
If you have done all the necessary basics with no sucess here are a few things to try next.
1 - Coolant
As BDAqua mentioned above, coolant evaporates and often leaks at the 'O' rings, to check this you will need to remove the CPUs from the LCS and check for crystalisation (white rice). If you have leakage, it will be time to drain the block, add new coolant and 'O' rings. This is tricky to do but there is lots of info here and on other sites to help you.
2 - Thermal paste
Replace the thermal paste with Artic MX4.
Try the above and let is know how ou get on.

Thinking about switching to Intel Mac Mini... questions for the cognoscenti

Greetings:
I've been checking out the new Intel Mac Minis and I was thinking of purchasing one to replace my AV computer (PC) in the living room, which the GF currently uses. She's a typical user: watches video files/DVDs, uses iTunes excessively , sends web email and surfs the Net.
I've fairly decided on an Intel Core Duo Mini. Since I know the basics about Mac, I had a few questions:
1. What's an appropriate amount of RAM for a non-power user? Would 1 GB be more than enough or overkill? I'm used to running 1GB in a Windows machine. Plus, I'm also used to popping in memory when I needed to upgrade, and I see that's not really an option on the Mini.
2. How would I integrate it into a Windows network? Would the Mini be able to share files with a Windows machine and vice versa?
3. Regarding network integration: how easily would the Mini integrate into an existing Linksys 802.11g home network?
Lastly, this isn't really an (easily) answerable question, but how easy do you think it would be for an average computer user to get up and running on a Mac after having used Windows machines all their life?
Thanks, I look forward to your responses.
-Craig
Homebuilt Windows XP Pro 2GB PC 3500 RAM, 500GB SATA RAID (2x250), ATI AIW 9700 Pro, Athlon XP3200

Hello, I can only really answer Q's 1 & 3 as I've only owned a mini for the past 24 hours.
I purchased the Single Core after taking advice of the Apple Store staff in Manchester, they were quite helpful. I only really produce music (have used Ableton, Acid Pro etc on PC for quite a while), surf the web, do my banking etc so was advised that the Single Core with 512mb would be sufficent. I work for an ISP and have 10 years plus knowledge of Windows but I was prepared to listen and learn having never used a mac before. From my own experience, I'm used to having to use a pc with minimum spec ie min 1.2GHz processor, 1gb ram in order to produce music without any pops or clicks (latency), though sound cards also play a part. I've also had to keep internet activity well away from any PC that I produce music on in that respect. Anyhow, I'm going off on a tangent here but I was playing around with garageband last night and I've never known music production to run so smoothy on 512mb RAM, never known it before so was extremely impressed and certain I made the right purchase opting for Solo Core. You may not actually NEED the full 1gb though this depends what you're doing. To answer your other question, my mac slotted straight into my home nertwork without making any additional configuration.
i.e how long does it take to get used to a mac, I've found there is a learning curve but it's not THAT difficult, it's just the odd thing such as no right click of the mouse that takes some getting used to.

Itunes on my Mac 10.4.11 does not recognize my iphone

itunes on my Mac 10.4.11 does not recognize my iphone 4S
also, once I plug in my iphone, it is recognized as a camera, but nothing to do with music.
if i have to upgrade software, how do i do that?

You get Mac OS X 10.5 on DVD if you have a PowerPC G4 or G5 Mac, or Mac OS X 10.6 on DVD if you have an Intel Mac. If you're using a G3 Mac, you need a newer computer.
(66587)

Can't use ipod and external HD anyon imac g3 after using it on intel mac...

hi, i've recently bought a intel imac and it has (what else) tiger on it. My girlfriend has an old g3 imac with jaguar on it. Today I connected my ipod to the old g3 imac (because i needed some files, about 10gb) and it didn't appear in finder or in itunes.
After trying some stuff, like resetting and retrying, etc., I went home to get my external HD and again, when i plugged it in, it didn't appear in finder. Strange, because before I had my new computer, the ipod and the HD were connected to the g3 imac all the time and on the intel imac, they still work perfect.
Then, I went to disk-utility and it recognised my HD but when i tried to activate the external HD from there, nothing happened. No error, no message, nothing.
But (and as we say in Belgium, now comes the ape out of the sleeve) when i clicked repair (in disk utility), it said that i didn't have the permissions to activate it...
--it was something like cannot activate dev/disk/blablabla dont have permission something something...
Could it be that my new computer has put some sort of protection on my ipod and external HD? and how can I remove that protection?
Or is there another solution for this strange and dark mystery??????

I have 2 ipods, both would not work on G3 iBook once connected to an Intel iMac. Took me a long time on the phone to Apple to figure this one.
It seems to be a conflict with the 'volume format' of the ipod. Plugging it into an Intel will change the format to 'Mac OS extended (journaled)' for some reason my G3 would not recognise it then. To fix it I plugged ipod to the Intel and went to disk utility. Select the ipod (hopefully you can activate it). Go to the Erase menu and change the volume format to 'Mac OS extended'.
It should stay on that format and work on both computers.
Hope it works
iMac (Intel) Mac OS X (10.4.5)

ITunes on Intel Mac

Similar Messages

Maybe you are looking for