Itunes on my PC does not recognize my iPad on the front iTunes screen

itunes on my PC does not recognize my iPad as a device on the front iTunes screen. It did before.

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Similar Messages

My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?

My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?
Thanks

Have you updated iTunes with the absolute latest software? If you have not in a long time, your iPad won't be recognized.

Windows 7 or itunes does not recognize my ipad, windows 7 or itunes does not recognize my ipad

Help! After resetting my ipad, Windows 7 or Itunes does not recognize it. I have read and followed all assistance or how to's that I came across on line but nothing works.

Check in this order-
1. Make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
2. Try all the other ports on your computer, even a number of times.
3. Make sure your lead /connections are not faulty.
4. If you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
5. Make sure you have the latest version of iTunes installed.
6. If using Widows, make sure all Windows Updates are installed.
7. Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
8. And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

ITunes on my PC does not recognize my iPad

when I connect my IPad and start iTunes it does not show my iPad instead it opens the file folders for AppleiPad and my Pictures

Did you just recently update your iTUnes? And I'm guessing you're on a pc?
If so, go into the control panel, programs, add/remove programs and uninstall iTunes, apple mobile device support and apple application support. then reinstall iTUnes and see if that helps

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

Hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?

hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?

Click here, buy a Mac OS X 10.6 DVD, and then run the 10.6.8 combo updater.
(90452)

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Itunes 11.1.5 does not recognize the switch to 64 bit mode from 32... won't open

itunes 11.1.5 does not recognize the switch to 64 bit mode from 32... won't open

Is there some background story to this that might give us some clue? An error message quoted exactly? Did you just do an update?
Try starting iTunes with the shift key held down. If it starts it is probably some old plugin presenting problems.

Itunes does not recognize my Ipad after software update. says it is in recovery mode, Itunes does not recognize my Ipad after software update.

After an ipad software update, it does not recognize my Ipad in Itunes. Gives error 14. what to do?

You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
If you haven't synced to a computer them (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

TS1538 My computer does not recognize my iPad at all...

I have an iPad 1, have been working fine, until 2 months ago.
Suddenly, it only charges battery if it is Powered Off (it will not charge if I plug it while it is ON, or in Sleep mode). Once I Power Off, I plug and starts charging. If I turn it on while charging, I can use it and it DOES charge until 100% . HOWEVER, screen does not read CHARGING like it did before!!! Crazy, eh? Hence, this is the only way I can charge it. However, this is not the worst part!!
Worst of all, is that now my Windows PC does not recognize my iPad at all. I connect with same USB cable (tried another cable with same result) to the computer, and Windows does not recognize ANY device there. I tried to connect the cable while Powered On, while Powered Off, same results... Tryed another USB device, and it DOES recognize it with no problems. It is a USB 2.0 port, and also iTunes 10.6. Nothing.
Any suggestions please? Thanks!!!

I wanted to add... went through all Apple tutorials to reset the iPad, check for updates, etc. No help there. Thanks!

My PC does not recognize my ipad, what to do?

My itunes does not recognize my ipad & my ipad indicates it needs to sync with itunes. what should I do?

You will need to restore using recovery mode. Here are the instructions.
http://support.apple.com/kb/ht4097
This can take a few attempts before it will work, so be patient. Hopefully, it will work the first time for you.

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

PSE_13 Editor does not recognize Windows 7 but the Organizer does? How do I fix this?

PSE_13 Editor does not recognize Windows 7 but the Organizer does? How do I fix this?

Try making separate desktop icons for the Editor and Organizer. You can then launch directly. The standard desktop icon is for the welcome screen which often runs in the background or doesn’t shut down properly.
Start by right-clicking on the desktop and select:
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Photoshop Elements 13
Inside the Photoshop Elements 13 folder make sure you select the application (not a shortcut) by scrolling down to the files beginning with the letter P and highlighting ‘PhotoshopElementsEditor’
Then click next followed by finish.
You can repeat for the Organizer using the different file path.
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Elements 13 Organizer
Highlight ‘PhotoshopElementsOrganizer’
Then click next, followed by finish.
Now that you have your separate desktop icons you can delete the one for the welcome screen, if preferred.

"Check Names: Microsoft Outlook does not recognize '1. double click the attachment'" submit error

I have seen this question/issue on multiple forums and nobody seems to have an answer/fix yet. I included an e-mail submit button for my form, and when I practice submitting, everything sends fine. However, if I distribute the form (to allow for tracking, etc.) I get an error pop-up window that reads "Check names" "Microsoft Outlook does not recognize '1. double click the attachment'". What I mostly don't understand is "1. double click the attachment" is part of the directions/content in the e-mail after they actually, successfully submit the form. Why is the content auto-populating as part of the mailing address?? After you "Show More Names" and search for the correct recipient(s), you have the same error pop-up again with the 2nd step that's show in the content of the e-mail: "2. Acrobat will prompt you to select a responses file", until you select the recipients again by clicking "show more names". Then the e-mail populates, with "Completed Form&body=Instructions to add this form to a responses file: [email protected]?subject=Submitting" as a recipient, as well as the 2 recipients you had to search for.
Does anybody know why this happens and how to fix it!?

We are having the same issue of trying to send a Shared Review from Adobe Pro XI and getting a error. We are currently using Outlook 2010. Hope someone from Adobe support can answer this issue and other Shared Review issues that are related in nature.

Itunes on my PC does not recognize my iPad on the front iTunes screen

Similar Messages

Maybe you are looking for