ITunes on my PC does not recognize my iPad
when I connect my IPad and start iTunes it does not show my iPad instead it opens the file folders for AppleiPad and my Pictures
Did you just recently update your iTUnes? And I'm guessing you're on a pc?
If so, go into the control panel, programs, add/remove programs and uninstall iTunes, apple mobile device support and apple application support. then reinstall iTUnes and see if that helps
Similar Messages
-
My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?
ThanksHave you updated iTunes with the absolute latest software? If you have not in a long time, your iPad won't be recognized.
-
Itunes on my PC does not recognize my iPad on the front iTunes screen
itunes on my PC does not recognize my iPad as a device on the front iTunes screen. It did before.
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
After installing the latest iTunes updates, the computer does not recognize the ipad
I updated the software on my iPad and my computer and now my computer will not recognize my iPad. Any suggestions?
I updated the software on my iPad and my computer and now my computer will not recognize my iPad. Any suggestions?
-
We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?
You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/
-
hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?
Click here, buy a Mac OS X 10.6 DVD, and then run the 10.6.8 combo updater.
(90452) -
My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?
Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
itunes 11.1.5 does not recognize the switch to 64 bit mode from 32... won't open
Is there some background story to this that might give us some clue? An error message quoted exactly? Did you just do an update?
Try starting iTunes with the shift key held down. If it starts it is probably some old plugin presenting problems. -
my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom -
After an ipad software update, it does not recognize my Ipad in Itunes. Gives error 14. what to do?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
If you haven't synced to a computer them (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
after updating my ipad 2 to ios5 it got stuck on the conect to itunes and the computer does not recognize it. what do i do?
You cannot update an iPad 2 to iOS 5 at this time, only iOS 6.1.
-
TS1538 My computer does not recognize my iPad at all...
I have an iPad 1, have been working fine, until 2 months ago.
Suddenly, it only charges battery if it is Powered Off (it will not charge if I plug it while it is ON, or in Sleep mode). Once I Power Off, I plug and starts charging. If I turn it on while charging, I can use it and it DOES charge until 100% . HOWEVER, screen does not read CHARGING like it did before!!! Crazy, eh? Hence, this is the only way I can charge it. However, this is not the worst part!!
Worst of all, is that now my Windows PC does not recognize my iPad at all. I connect with same USB cable (tried another cable with same result) to the computer, and Windows does not recognize ANY device there. I tried to connect the cable while Powered On, while Powered Off, same results... Tryed another USB device, and it DOES recognize it with no problems. It is a USB 2.0 port, and also iTunes 10.6. Nothing.
Any suggestions please? Thanks!!!I wanted to add... went through all Apple tutorials to reset the iPad, check for updates, etc. No help there. Thanks!
-
My PC does not recognize my ipad, what to do?
My itunes does not recognize my ipad & my ipad indicates it needs to sync with itunes. what should I do?
You will need to restore using recovery mode. Here are the instructions.
http://support.apple.com/kb/ht4097
This can take a few attempts before it will work, so be patient. Hopefully, it will work the first time for you. -
I recently updated to the new iOS through my computer with my iPhone 4 pluged in via USB. It has shut down my phone and just shows the iTunes icon with the USB cord to plug in. When I try to sync my phone with the computer iTunes does not recognize it!! So now my iPhone is useless and I really need it back to working order!! Please help......Hilda
Hello Hilda Louise
Start with the article below to get your iPhone to be recognized in iTunes again. Then you will probably need to restore it to get it back up and running.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
Windows 7 or itunes does not recognize my ipad, windows 7 or itunes does not recognize my ipad
Help! After resetting my ipad, Windows 7 or Itunes does not recognize it. I have read and followed all assistance or how to's that I came across on line but nothing works.
Check in this order-
1. Make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
2. Try all the other ports on your computer, even a number of times.
3. Make sure your lead /connections are not faulty.
4. If you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
5. Make sure you have the latest version of iTunes installed.
6. If using Widows, make sure all Windows Updates are installed.
7. Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
8. And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/
Maybe you are looking for
-
JQuery ids in Apex dialog region plug-in
Hi, Apex 4.0 I have a plug in (here ) that opens a dialogue region when someone clicks on a button. I'm calling a dynamic action to process a PL/SQL procedure but it takes a while to process the procedure. I have another plug-in which disables the sc
-
Usage of RSUPGRCHECK report in BW7 environment
Hello folks, have you some experience with usage of RSUPGRCHECK report in BW7 environment? I'm trying to find some tool in BW to explore what objects went inactive after import of high volume of transport request. We are planning to go live recently
-
Dear all, When i am generating billing, based on the a/c determination the amount will goes to relevant G/L accounts. My requirement is same excise amount need to go another G/L also... how is it possible.. Is there any user exit?? Please advise
-
Hi, I have a SQ01 query .. based on that query i have to call another query ie : when my basic list gets diplayed .. after i click on it a detailed list should be displayed (this again is another SQ01 query)... is this possible through abap Query and
-
Issue while making a AJAX call to a servlet in ALUI.
Hi, The problem scenario is : I log into the portal using "http://147.149.132.93:7001/portal/server.pt" i have two instances of applications which have same files but provide different functionality one on 147.149.132.93 and other on 147.149.132.102